MIRROR POLISHED POSTS See page 46

PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design. SIDE FIX POSTS See page 26 CHOOSE YOUR TOP POSTS See page 25 SATIN POLISHED POSTS See page 23 MIRROR POLISHED POSTS See page 46 SQUARE POSTS See page 44 CROSSBAR HOLDER POSTS See page 30 STRAND WIRE POSTS See page 28 OUR NEW PRE-ASSEMBLED POSTS ARE SUPPLIED WITHOUT SADDLES, SO YOU CAN CHOOSE YOUR OWN TOP TO SUIT YOUR PREFERRED DESIGN, SEE PAGES 33, 45 & 47. 22

PRE-ASSEMBLED POSTS WITH SPIGOTS END POST MID POST CORNER POST PAN HEAD FIXING 80mm 275mm Ø 42.4mm POST Ø 10.5mm 1100mm Ø 8.5mm Ø 101mm Ø 48.3mm POST Ø 10.5mm Pan head screw code: 189900620 (For Ø 42.4 and 48.3mm saddles), see page 56-59 for our range of fixings. TUBE 275mm Ø 8.5mm Ø 116mm 42.4 1804731C 48.3 1804731D 42.4 1806731C 48.3 1806731D 42.4 1804732C 48.3 1804732D 42.4 1806732C 48.3 1806732D 42.4 1804733C 48.3 1804733D 42.4 1806733C 48.3 1806733D For our full range of tube, see page 31. ALL POSTS HAVE: +/- 5 Welded base fitting complete with rubber 'O' ring and cover. End and mid posts have adjustable spigot. Glass clamp for 10mm glass (8 and 12mm rubbers available). Variable fixing bolt.

PRE-ASSEMBLED SIDE-FIX POSTS CHOOSE YOUR OWN POST TOP ARRIVING APRIL 2017 END POST 150mm MID POST When using side-fix posts glass should be drilled & security pins code: 189900401 for 8-10mm thick glass or code: 189900402 for 12mm thick glass should be used. A mm 600mm FOR POST CAPS, SPIGOTS & TUBE FITTINGS, SEE PAGES 33-36. To keep stainless steel handrail & fittings in top condition long after installation, use our tea staining kit, see page 55. 100mm Ø mm A mm 42.4 1178 1806794C 48.3 1172 1806794D ALL POSTS HAVE: Ø mm A mm 42.4 1178 1806795C 48.3 1172 1806795D +/- 5 Two M10 x 200mm threads, fascia mount. Stainless steel cap in the base of the post. Glass clamp for 10mm glass (8 and 12mm rubbers available). Variable fixing bolt. 26

MAKE YOUR OWN POSTS A pre-welded base on a plain post saves you time and money on welding, when a bespoke post is required. Simply cut it to the desired height and fit extra components where needed. The plain upright is supplied in an easy to handle length and is ideal for offset glass clamps on staircases. PRE-ASSEMBLED PLAIN POST ARRIVING APRIL 2017 Ø 42.4mm POST Ø 10.5mm Ø 8.5mm Ø 101mm A mm Ø 48.3mm POST Ø 10.5mm Ø 8.5mm Ø 116mm Ø mm A mm 42.4 1000 1806790C 48.3 1000 1806790D GLASS CLAMPS CAN BE FOUND ON PAGES 37-43. Ø mm Height mm 42.4 1000 1804708CB 48.3 1000 1804708DB 42.4 1000 1806708CB 48.3 1000 1806708DB 42.4 1200 1804708CL 48.3 1200 1804708DL 42.4 1200 1806708CL 48.3 1200 1806708DL FOR POST CAPS, SPIGOTS & TUBE FITTINGS, SEE PAGES 33-36.

SQUARE PRE-ASSEMBLED POSTS END POST MID POST CORNER POST 275mm To keep stainless steel handrail & fittings in top condition long after installation, use our tea staining kit, see page 55. 976.6mm Ø 11mm 100mm 275mm TUBE mm 40 1806731S40 mm 40 1806732S40 mm 40 1806733S40 For mirror finish tube, see page 45. ALL POSTS HAVE: +/- 5 Welded base fitting complete with cover. Glass clamps for 10mm glass (8 and 12mm rubbers available). Variable fixing bolt. 44

SQUARE FITTINGS ADJUSTABLE HANDRAIL BRACKET Wall/tube ADJUSTABLE HANDRAIL BRACKET Wall/flat 90º FIXED SPIGOT SADDLE Tube/tube ADJUSTABLE SPIGOT SADDLE Tube/tube To Suit mm Ø mm 40 42.4 1806303S40C mm 40 1806303S40F To Suit mm Ø mm 40 42.4 1806311S40C To Suit mm Ø mm 40 42.4 1806312S40C 90º ELBOW ARRIVING APRIL 2017 3 WAY CORNER LONG TEE ADJUSTABLE ELBOW ARRIVING APRIL 2017 mm 40 1806202S40 mm 40 1806204S40 mm 40 1806205S40 mm 40 1806227S40 IN LINE CONNECTOR WELD ON COVER PLATE To suit 207S40 FLAT TOP END CAP ARRIVING APRIL 2017 mm 40 1806206S40 mm 40 1806207S40 mm 40 1806208S40 mm 40 1806215S40 2 HOLE BALUSTER BRACKET RECTANGULAR BALUSTRADE BRACKET TUBE mm 40 1806256S40 mm 40 1806213S40 2.5mm thickness. mm Length m 40 2.9 1806704S40 40 5.8 1806700S40 FOR SQUARE GLASS CLAMPS, PLEASE SEE PAGE 39.

GLASS CLAMPS The most popular method for providing a glazed balustrade, while at the same time keeping the outlook open and views beyond visible. Glass clamps are simple to install and are offered in either a square or radiused option, providing a glazed system between posts. Compatible with 8 to 12mm thick glass, clamps can be used over any length of installation as well as slopes and staircases. Group Style To Suit Glass Thickness 400 6* & 8mm Flat Fix Type Description Measurements Page no. Available in Stainless steel Type 316 Height: 26mm Length: 40mm Depth: 16mm 38 441 10mm Flat Available in Stainless steel Type 304 & 316 Height: 42mm Length: 52mm Depth: 22mm 38 401 8*, 10 & 12*mm Ø 42.4mm Ø 48.3mm Flat Available in Stainless steel Type 304, 316, Zamac & chrome mirror effect & raw finish Height: 45mm Length: 63mm Depth: 28mm 38 401180 8*, 10 & 12*mm Glass to glass Available in Stainless steel Type 304 & 316 Height: 45mm Length: 107mm Depth: 28mm 38 40190 8*, 10 & 12*mm Glass to glass Available in Stainless steel Type 304 & 316 Height: 45mm Length: 73mm Width: 73mm Depth: 28mm 38 440 15, 17.5*, 19* & 21.5*mm Flat Available in Stainless steel Type 316 Height: 70mm Length: 60mm Depth: 41mm 39 442 6*, 8 & 10*mm Flat Available in Stainless steel Type 316 Height: 45mm Length: 45mm Depth: 19.5mm 39 402 8*, 10 & 12*mm Ø 42.4mm Ø 48.3mm Flat Available in Stainless steel Type 304, 316 & Zamac Height: 55mm Length: 60mm Depth: 35mm 39 403 8*, 10 & 12*mm Ø 42.4mm Ø 48.3mm Flat Available in Stainless steel Type 304 & 316 Ø: 60mm Depth: 28mm 41 *Requires special glass rubbers, see pages 38-41. FOR GLASS FIXING INFORMATION, SEE PAGE 41.

GLASS CLAMPS SMALL GLASS CLAMP Flat back, round front SMALL 'D' RUBBERS STAMPED GLASS CLAMP Flat back, round front 6-8 1806400F Not suitable for handrailing applications. Typical uses are for display and shelving. Supplied with 8mm rubbers. For 6mm, please refer to Small D Rubbers. Flat back, round front 6 1899001S06 Round back, round front 10 1804441F 10 1806441F Not suitable for handrailing applications. Typical uses are for display and shelving. Supplied with 10mm rubber. RAW FINISH Round/flat back, round front 8-10 1802401F 8-12 1804401F 8-12 1806401F Supplied with 10mm rubbers. For 8 or 12mm, please refer to D Rubbers. CHROME MIRROR EFFECT Round/flat back, round front 8-10 42.4 1802401C 8-10 48.3 1802401D 8-12 42.4 1804401C 8-12 48.3 1804401D 8-12 42.4 1806401C 8-12 48.3 1806401D Supplied with 10mm rubbers. For 8 or 12mm, please refer to D Rubbers. 180 DOUBLE GLASS CLAMP 8-10 42.4 1802401CZ 8-10 48.3 1802401DZ 8-10 Flat 1802401FZ Supplied with 10mm rubbers. For 8mm, please refer to D Rubbers. Suitable for powder coating. 90 DOUBLE GLASS CLAMP 8-10 42.4 1802401CP 8-10 48.3 1802401DP 8-10 Flat 1802401FP Supplied with 10mm rubbers. For 8mm, please refer to D Rubbers. MIRROR FINISH Flat back, round front 8-12 1804401180 8-12 1806401180 Supplied with 10mm rubbers. For 8 or 12mm, please refer to D Rubbers. MIRROR FINISH Round back, round front 8-12 180440190 8-12 180640190 Supplied with 10mm rubbers. For 8 or 12mm, please refer to D Rubbers. FOR GLASS CLAMP SIZES, SEE PAGE 37. 8-10 1806401FM Supplied with 10mm rubbers. 8mm rubbers, code: 1899001008. 8-10 42.4 1806401CM 8-10 48.3 1806401DM Supplied with 10mm rubbers. 8mm rubbers, code: 1899001008. FOR OUR FULL RANGE OF WELDABLE GLASS CLAMPS, SEE PAGES 42-43. FOR VARIABLE FIXING BOLT CODE: 189900602A, SEE PAGE 57. 38

GLASS CLAMPS 'D' RUBBERS PLASTIC SCREW COVER CAPS METAL SECURITY PINS FOR GLASS 8.00 189900108 8.76 18990010876 10.00 189900110 12.00 189900112 SMALL GLASS CLAMP Flat back, square front Colour Grey 189900501 Silver 189900502 SMALL GLASS CLAMP Round back, square front 8-10 189900401 12 189900402 Requires a minimum Ø 10mm holes in glass. SMALL SQUARE RUBBERS 6-10 1806442F Supplied with 8mm rubbers. For 6 or 10mm, please refer to Small Square Rubbers. Flat back, square front 6-10 42.4 1806442C 6-10 48.3 1806442D Supplied with 10mm rubbers. For 6 or 8mm, please refer to Small Square Rubbers. Round back, square front 6 189944206 8 189944208 RAW FINISH Round/flat back, round front 8-12 1802402F 8-12 1804402F 8-12 1806402F Supplied with 10mm rubbers. For 8 or 12mm, please refer to Square Rubbers. SQUARE RUBBERS 8-12 42.4 1802402C 8-12 48.3 1802402D 8-12 42.4 1804402C 8-12 48.3 1804402D 8-12 42.4 1806402C 8-12 48.3 1806402D Supplied with 10mm rubbers. For 8 or 12mm, please refer to Square Rubbers. LARGE GLASS CLAMP Flat back, round front 8-12 1802402CZ Supplied with 10mm rubbers. For 8 or 12mm, please refer to Square Rubbers. FOR GLASS CLAMP SIZES, SEE PAGE 37. LARGE 'D' RUBBERS 8 189900208 10 189900210 12 189900212 15-21.5 1806440F Clamps supplied with 15mm rubbers. For 17.5, 19 or 21.5mm, please refer to Large D Rubbers. 15.0 1899001L15 17.5 1899001L175 19.0 1899001L19 21.5 1899001L215

RAILING SADDLES FIXED SPIGOT FIXED SPIGOT FIXED SPIGOT ADJUSTABLE SPIGOT FLOOR MOUNTING Flat/tube TUBE FIX Tube/tube 90 TUBE FIX Tube/tube TUBE FIX Tube/tube 42.4 1804307FC 48.3 1804307FD 42.4 1806307FC 48.3 1806307FD Height 60mm, also available in heights of 71, 83 and 95mm. 42.4 1804310CC 48.3 1804310DD 42.4 1806310CC 48.3 1806310DD 42.4 1804311CC 48.3 1804311DD 42.4 1806311CC 48.3 1806311DD For 201 type elbows used with handrails. 42.4 1804312CC 48.3 1804312DD 42.4 1806312CC 48.3 1806312DD ADJUSTABLE SPIGOT FIXED SADDLE FIXED SADDLE ADJUSTABLE HANDRAIL ADAPTOR ROUND TOP FLAT TOP Adjustable angle Adjustable height Ø mm 42.4 1804314CC 48.3 1804314DD 42.4 1806314CC 48.3 1806314DD Ø mm 42.4 1804351C 48.3 1804351D 42.4 1806351C 48.3 1806351D 1804351F 1806351F FIXED SADDLE FIXED SADDLE FIXED SADDLE FIXED SADDLE 90 ROUND CORNER TOP 135 ROUND CORNER TOP 135 FLAT CORNER TOP 90 FLAT CORNER TOP 42.4 1804356C 48.3 1804356D 42.4 1806356C 48.3 1806356D For 202 type elbows used with handrails. 42.4 1804354C 48.3 1804354D 42.4 1806354C 48.3 1806354D For 220 type elbows used with handrails. 1804354F 1806354F 1804356F 1806356F FIXED SADDLES REQUIRE AN M8 BOLT CODE: 189900604 TO SECURE, SEE PAGE 57. SADDLES COME WITH Ø 5mm FIXING HOLES, FOR SCREWS, SEE PAGE 57.

TUBE FITTINGS 90 ELBOW RADIUSED CORNER 90 ELBOW ROUND CORNER 90 ELBOW SQUARE CORNER 135 ELBOW 42.4 1804200C 48.3 1804200D 42.4 1806200C 48.3 1806200D 42.4 1804201C 48.3 1804201D 42.4 1806201C 48.3 1806201D 42.4 1804202C 48.3 1804202D 42.4 1806202C 48.3 1806202D 42.4 1804220C 48.3 1804220D 42.4 1806220C 48.3 1806220D 3 WAY CORNER LONG TEE 4 WAY CROSS STAINLESS WELDABLE ELBOW 42.4 1804204C 48.3 1804204D 42.4 1806204C 48.3 1806204D 42.4 1804205C 48.3 1804205D 42.4 1806205C 48.3 1806205D 42.4 1804222C 48.3 1804222D 42.4 1806222C 48.3 1806222D 42.4 1804E42 48.3 1804E48 42.4 1806E42 48.3 1806E48 ADJUSTABLE HANDRAIL ADAPTOR ADJUSTABLE ELBOW ADJUSTABLE ELBOW SMOOTH ROTATING ELBOW SCROLL END 42.4 1806316CC 48.3 1806316DD 42.4 1804203C 48.3 1804203D 42.4 1806203C 48.3 1806203D 42.4 1804227C 48.3 1804227D 42.4 1806227C 48.3 1806227D 42.4 1804233C 48.3 1804233D 42.4 1806233C 48.3 1806233D 42.4 1804221C 48.3 1804221D 42.4 1806221C 48.3 1806221D TUBE ADAPTOR IN LINE CONNECTOR 2 WAY ADJUSTABLE FLUSH ANGLE 3 WAY ADJUSTABLE FLUSH ANGLE 42.4 1804313CC 48.3 1804313DD 42.4 1806313CC 48.3 1806313DD 42.4 1804206C 48.3 1804206D 42.4 1806206C 48.3 1806206D 42.4 1804223C 48.3 1804223D 42.4 1806223C 48.3 1806223D 42.4 1804224C 48.3 1804224D 42.4 1806224C 48.3 1806224D 34

FLANGES & S EXTERNAL ROUND TUBE FLANGE SQUARE EDGE TUBE FLANGE WELDABLE ROUND WALL FLANGE COVER PLATE To suit 217 42.4 1804209C 48.3 1804209D 42.4 1806209C 48.3 1806209D 42.4 1804210C 48.3 1804210D 42.4 1806210C 48.3 1806210D 42.4 1804217C 48.3 1804217D 42.4 1806217C 48.3 1806217D 42.4 1804218C 48.3 1804218D 42.4 1806218C 48.3 1806218D INTERNAL FIT FLOOR BASE WELD ON ROUND With O ring & cover 3 PART HAMMER & GLUE FIT INTERNAL FIT TUBE FLANGE No cover plate required 42.4 1804225C 48.3 1804225D 42.4 1806225C 48.3 1806225D 42.4 1804228C 48.3 1804228D 42.4 1806228C 48.3 1806228D 42.4 1804211C 48.3 1804211D 42.4 1806211C 48.3 1806211D 42.4 1804237C 48.3 1804237D 42.4 1806237C 48.3 1806237D ADJUSTABLE ELBOW TUBE FLANGE INTERNAL FIT TUBE FLANGE WELD ON ROUND COVER PLATE 42.4 1804229C 48.3 1804229D 42.4 1806229C 48.3 1806229D To keep stainless steel handrail & fittings in top condition long after installation, use our tea staining kit, see page 55. 42.4 1804235C 48.3 1804235D 42.4 1806235C 48.3 1806235D THROUGH STAIR FIXING KIT 42.4 1804207C 48.3 1804207D 42.4 1806207C 48.3 1806207D 42.4 1804208C 48.3 1804208D 42.4 1806208C 48.3 1806208D To suit 207. 42.4 1804226C 48.3 1804226D 42.4 1806226C 48.3 1806226D To suit 225. 42.4 1804232C 48.3 1804232D Maximum tread thickness is 40mm. For thicker treads longer threaded lengths can be purchased. 42.4 1804236C 48.3 1804236D 42.4 1806236C 48.3 1806236D To suit 235.

BALUSTER BRACKET 2 HOLE ROUND 2 HOLE ROUND With tube support spigot 2 HOLE ROUND FOLDED TUBE TO WALL CONNECTOR 42.4 1804212C 48.3 1804212D 42.4 1806212C 48.3 1806212D 42.4 1804219C 48.3 1804219D 42.4 1806219C 48.3 1806219D 42.4 1806256C 48.3 1806256D 42.4 1804255C 48.3 1804255D 42.4 1806255C 48.3 1806255D 4 HOLE ROUND BALUSTER BACKING PLATE TUBE CLAMP TUBE SUPPORT SPIGOT ADJUSTABLE CORNER - INTERNAL/EXTERNAL 1804254 1806254 Suitable for Ø 42.4 and 48.3mm. 42.4 1806252C 48.3 1806252D 42.4 1804259C 48.3 1804259D 42.4 1806259C 48.3 1806259D 42.4 1806253C 48.3 1806253D RECTANGULAR BACK RECTANGULAR BACK 2 PART TYPE FIXING BRACKET SINGLE FIXING BRACKET DOUBLE 42.4 1804213C 48.3 1804213D 42.4 1806213C 48.3 1806213D 48.3 1804213DX 42.4 1806511C 48.3 1806511D 42.4 1804512C 42.4 1806512C 48.3 1806512D END CAPS FLAT TOP RAISED TOP DOME TOP Ø mm 42.4 1804214C 48.3 1804214D 42.4 1806214C 48.3 1806214D Ø mm 42.4 1804215C 48.3 1804215D 42.4 1806215C 48.3 1806215D Ø mm 42.4 1804216C 48.3 1804216D 42.4 1806216C 48.3 1806216D 36

PRE-ASSEMBLED BOLT-DOWN POSTS CHOOSE YOUR OWN POST TOP ARRIVING APRIL 2017 OUR MOST FLEXIBLE POST YET! CHOOSE YOUR POST & TOP END POST MID POST CORNER POST Visit our website. 150mm Ø 42.4mm POST Ø 10.5mm Ø 8.5mm For the full range, see page 33. A mm 600mm Ø 101mm Ø 48.3mm POST Ø 10.5mm For the full range, see page 36, 45 & 47. Ø 8.5mm Ø 116mm Ø mm A mm 42.4 978 1804791C 48.3 972 1804791D 42.4 978 1806791C 48.3 972 1806791D Ø mm A mm 42.4 978 1804792C 48.3 972 1804792D 42.4 978 1806792C 48.3 972 1806792D Ø mm A mm 42.4 978 1804793C 48.3 972 1804793D 42.4 978 1806793C 48.3 972 1806793D For the full range, see page 15. ALL POSTS HAVE: +/- 5 For the full range, see page 34, 45 & 47. Welded base fitting complete with rubber 'O' ring and cover. Glass clamp for 10mm glass (8 and 12mm rubbers available). Variable fixing bolt.

PRE-ASSEMBLED POSTS CHOOSE YOUR OWN POST TOP Our pre-assembled posts come with open tops and are suitable for a wide range of applications. With a change of a top fitting any of the designs below are easily achievable. The posts are designed for a quick and easy installation with maximum flexibility to meet your design requirements. FOR TECHNICAL DRAWINGS VISIT THE PRE-ASSEMBLED SECTION OF OUR WEBSITE. Tech 6 GREAT DESIGNS FROM ONE POST! 80 QUICK & EASY INSTALLATION Ideal for DIY installations, no drilling of tube required Great for exhibition stands & temporary structures Gives overall height of 1100mm with handrail tube Adj. handrail adaptor is adjustable in height & angle New easy 90º corner saddle added to the range, see page 33 ILLUMIRAIL For use with Illumirail LED Bar system Gives overall height of 1100mm with handrail tube Works with split tube, rectangle & oval top rails Only available for Ø 42.4mm Visit our website for more information POST CAPS FLUSH GLASS Suitable for applications where the drop is under 600mm This will not give 1100mm height Ideal for areas that need demarcation This design offers maximum unobstructed view from a handrail post system Choice of caps available, see page 36, 45 & 47 POST CAPS RAISED GLASS TO 1100mm Suitable for applications where the drop is under 600mm Gives overall height of 1100mm Choice of caps available, see page 36, 45 & 47 POST CAPS RAISED GLASS & SPLIT TUBE Gives overall height of 1100mm For our range of split tube top rails that work in this design, see page 15 Choice of caps available, see page 36, 45 & 47 TUBE FITTINGS Suitable for applications where the drop is under 600mm This will not give 1100mm height if used without standard pre-assembled posts Tube fittings can be found on page 34, 45 & 47 24