SIRUI Video & Broadcast. Tripods Heads Slider Rigs Cages Accessories

SIRUI Video & Broadcast Tripods Heads Slider Rigs Cages Accessories SIRUI Video & Broadcast Product Catalogue 2017

SIRUI Broadcasting for Professionals SIRUI Video & Broadcast Catalogue Contents Tripods Broadcast BCT P. 04 Video RX P. 06 Accessories RX P. 08 Monopods Video PS P. 10 Video EPS P. 10 Tripod heads Broadcast BCH P. 12 Video (Arca Swiss comp.) VA P. 13 Video VH P. 13 Quick release plates Broadcast BP P. 12 Video VP P. 13 Video platform VH-90 P. 14 Video equipment Video jib HA-77 P. 14 Video slider VS-60 P. 15 Lens rail VP-350 P. 15 Survival kits VSK P. 16 Camera crane VTJ-1.8 P. 18 YEARS WARRANTY Tripods, Heads, Accessories SIRUI Europe GmbH offers customers a 6 year warranty (2 years for bags and backpacks) from the date of purchase on manufacturing and material defects. Damage caused by mechanical interference, excessive heat, improper use and loss is not covered by this warranty. This warranty is only valid upon presentation of an appropriate warranty card and for purchases made within Europe. Your legal rights including statutory rights are not affected. Should you wish to invoke this warranty, please contact the Service Centre: SIRUI Europe GmbH c/o nobrainer GmbH, Venloer Str. 301-303, 50823 Köln, Germany Phone: +49 221 94 99 54-50, Email: info@sirui.de simply better. simply ingenious.

SIRUI BCT-Serie Broadcast Tripods in Aluminium or 10x Carbon SIRUI BCT Broadcast Video tripods Tripods for the perfect film Levelling half bowl The BCT-2003 and BCT-2203 tripods feature a permanent 75mm half bowl, the BCT-3002, BCT-3202, BCT-3003 and BCT-3203 tripods feature a 100mm half bowl. The ideal video head for the BCT series is the SIRUI BCH series head. Centre and floor spreader The comfortable centre spread makes this tripod indispensable for professional film makers. The tripod spreaders are removable, can be individually adjusted and increase the stability of the tripod. Twist locks The large aluminium screw heads are particularly useful, ensuring sure and quick manipulation. Double tube legs The lower sections of the legs are made of one tube and the upper sections of two. This increases stability and reduces the likelihood of vibration. Tripod legs are made of only two or three sections for quick setup and takedown. Double spikes and rubber feet When working without the spreader and on soft surfaces, the double spikes can be covered with stable rubber feet (included). 10x CARBON Guaranteed SIRUI Quality Model Material Sections ø Tube min. height Height max. height Pack size Monopod height Weight Load Leg angles BCT-2003 Alu 3 16-22 435 1600-750 - 4.1 10 infinite BCT-2203 Carbon 3 16-22 435 1600-750 - 3.7 10 infinite BCT-3002 Alu 2 19 670 1500-895 - 4.8 25 infinite BCT-3202 Carbon 2 19 670 1500-895 - 4.3 25 infinite BCT-3003 Alu 3 19-25 445 1600-750 - 5.0 18 infinite BCT-3203 Carbon 3 19-25 445 1600-750 - 4.5 18 infinite Size in millimetres, weight in kilograms, leg angles in degrees. Included: BCT tripod, centre spreader, floor spreader, 3 rubber feet, tripod bag with strap, tool, warranty card, instructions 04 simply filming. simply better. 05

SIRUI RX series for photography and filming SIRUI RX Studio Tripods huge, extremely strong Head support plate The aluminium head support plate is fitted with a 3/8 screw to secure the attached equipment. In order to prevent accidentally rotating the equipment, a fixing screw is located in the mounting plate. 75mm levelling bowl Included is the RX-75A 75mm (with R-3213X the R2X-75A) half bowl adapter which can be placed against the mounting plate as necessary. A suitable levelling half-ball for ideal alignment is, for example, the optional SIRUI RX-75B. Centre column R-4213X, R-4214X, R-5214X, R-5214XL: The RX-66C centre column is an optional extra. 63.5cm additional height when extended. R-3213X: The RX-402C centre column is included. 38cm additional height when extended. Multifunctional possibilities Twist locks Sealed twist locks with rubber for grip. Just half a turn and the legs will start to descend. The locks can be disassembled for maintenance. Rubber feet and stainless steel spikes RX series tripods are all equipped with three rubber feet and three metal spikes. The rubber feet are ideal on firm, level ground. The metal spikes show their strength on soft, uneven ground. The tripod is equipped for all terrains. 10x CARBON Guaranteed SIRUI Quality Model Material Sections ø Tubes min. height Height max. height Pack size Monopod height Weight Load Leg angles R-3213X Carbon 3 28-33 115 1410 1790 610-1.8 22 21-52-82 R-4213X Carbon 3 28-36 105 1500 2135* 660-2.4 25 25-54-84 R-4214X Carbon 4 24-36 90 1500 2135* 550-2.5 25 25-54-84 R-5214X Carbon 4 28-40 90 1600 2235* 580-2.8 30 26-56-85 R-5214XL Carbon 4 28-40 100 2000 2635* 690-3.0 30 26-56-85 Size in millimetres, weight in kilograms, ratchet angles in degrees. *Height with RX-66C centre column (optional extra). Additional Features: Spirit level a level for perfect balance is located on the tripod shoulder. Leg angle locking mechanism the legs lock automatically when folding down. Three solid ratchet steps allow flexible use. Stabilising carabiner loading weight onto the hook ensures the tripod is stable and steady. An Allen key is located in the hook to allow the mounting plate or levelling ball to be fitted. Foam rubber leg wraps protect against high and low temperatures and ensure a secure grip during transport and in use. Included: R-4213X, R-4214X, R-5214X or R-5214XL: tripod, 3 rubber feet, 3 spikes, RX-75A levelling half bowl, tripod bag with handle, tool, warranty card, instructions R-3213X: tripod, 3 rubber feet, 3 spikes, R2X-75A levelling half bowl, RX-402C centre column, tripod bag with handle, tool, warranty card, instructions Optional RX accessories: Centre columns, levelling half bowls, levelling half balls you will find on the next page. R-3213X with included centre column 06 simply better. simply huge. 07

SIRUI RX series Optional accessories SIRUI RX Studio tripods huge, extremely strong SIRUI RX-66C Carbon centre column for RX tripods The SIRUI RX-66C is a centre column for RX series tripods. It is made from 10 layer carbon fibre and allows the tripod to benefit from an additional 63.5cm of height. For ground-level shots, the column can be used upside-down. For extra stability, the tripod stabilisation hooks can be loaded with weight. This also functions as a mounting tool. The reversible screw for tripod heads or other equipment has 1/4 and 3/8 threads. Suitable for the following SIRUI tripods: R-4213X, R-4214X, R-5214X, R-5214XL Specs: Sections: 2 Tube diameter: 28-32mm Height: 390mm Operational range: 115-635mm Weight: 500g Gigantic when filming and photographing The RX series tripods are the giants of SIRUI tripods. And if up to two metres high is not enough, you can add the optional RX-66C centre column to reach a stunning 2.63m. You want to film? No problem simply replace the mounting plate with the 75mm levelling ball, add the video head and go. The stability and handling will inspire and convince. And in order that this giant does not weigh too much, SIRUI has made the legs from super-lightweight and precision-balanced 10-layer carbon. SIRUI RX-75A half bowl adapter ø75mm / RX-100A half bowl adapter ø100mm The SIRUI half bowl adapters are the base for the SIRUI levelling half balls RX-75B, RX-100B or video heads with integrated half ball (BCH series) when using on a RX series tripod. The RX-75A is already included with the RX series tripods. The RX-100A can be purchased as an optional accessory. Suitable for SIRUI tripods: R-4213X, R-4214X, R-5214X, R-5214XL RX tripod with RX-75A half bowl adapter, RX-75B levelling half ball and VH-15 video head. SIRUI RX-75B levelling half ball ø75mm / RX-100B levelling half ball ø100mm For horizontal alignment of the assembled tripod head. The RX levelling half balls are specially made for SIRUI RX series tripods. The head support plate is fitted with three set screws to secure the mounted head. RX-75B for 75mm half bowls e.g. RX-75A RX-100B for 100mm half bowls e.g. RX-100A Specs: RX-75B RX-100B Head contact surface: ø 92mm ø 106mm Head connection: 3/8 thread Grip length: 140mm 140mm Total height: 205mm 210mm Tilt: 0-10 (any direction) Weight: 368g 450g Load: 18kg 18kg 08 simply better. simply giant. 09

SIRUI PS & EPS series Video/Photo Monopod with spreader SIRUI PS & EPS series 20 tilt function, panorama function Head support plate The aluminium head support plate is fitted with a set screw to secure the head. Head mounting screw The head mounting screw quickly switches from 1/4 to 3/8. 20 20 Panorama function The upper section with the foam leg wrap can be rotated by for video panning shots or panoramic views. This stops at the top blue twist lock which also serves to lock the rotation. PS series with ring locks EPS series with flip locks The PS monopods come with rubbered ring locks (left) and the EPS monopods with practical flip locks (right). The locks can be disassembled for maintenance. 20 20 20 Tilt in all directions A special feature is the tilting function. The section of the monopod that is above the spreader can be tilted by between 0 and 20 in any direction. Simply loosen the blue twist lock, adjust the friction and tilt. Spreader/Table top tripod The spreader can be detached and used as a table top tripod. (EPS with 3/8 thread). Without the spreader, it becomes a normal monopod which can be fitted with a rubber foot or metal spike (not EPS) as required. PS monopod with ring locks EPS monopod with flip locks Model Material Sections ø Tubes min. height max. height Tilt Rotation Foot length Height Weight Load P-204S Alu 4 19-28 700 1600 20 170 185 1.40 8 P-224S Carbon 4 19-28 700 1600 20 170 185 1.30 8 P-324S Carbon 4 22-32 745 1755 20 230 185 1.45 10 P-424S Carbon 4 25-36 785 1910 20 230 185 1.58 12 P-326S 10x Carbon 6 15-29 555 1500 20 170 185 1.32 8 P-426S 10x Carbon 6 19-33 568 1590 20 170 185 1.42 10 EP-204S Alu 4 19-28 630 1630 20 160 125/195 1.14 8 EP-224S Carbon 4 19-28 630 1630 20 160 125/195 1.02 8 Additional Features: Wrist strap a practical wrist strap improves safety when transporting and when photographing. The P-326S and P-426S monopods both have a belt clip on the wrist strap to allow the monopod to be carried on the belt. Foam rubber leg wrap protects against high and low temperatures and ensures a secure grip during transport and in use. With the grippy cold weather wrap any panorama is available. Spreader with fold-up feet. Saves space in storage and is comfortable to move or transport. Or, simply fold up the feet and use as a normal monopod. Included: PS monopod, rubber foot, metal spike, monopod bag with strap, tool, warranty card, instructions EPS monopod, rubber foot, monopod bag with strap, tool, warranty card, instructions 10 simply stable. simply better. 11

SIRUI BCH series Broadcast Fluid Video Heads for Professionals SIRUI VA and VH series Fluid Video Pan and Tilt Heads BCH Broadcast Video Heads Safety Lock System with Security Pin Fluid-damped for smooth panning 2 spirit levels ensure perfect balance Pan and tilt function with friction damping Extending pan arm with rubber grip Built-in levelling half ball: BCH-10, BCH-20 for 75mm half bowls BCH-30 for 100mm half bowls VA and VH Video Heads Safety Lock System with Security Pin Fluid-damped for smooth panning 2 spirit levels ensure perfect balance Infinitely variable tilt function tilts between -60 and +90 and locks Panorama base can be rotated by and locked Arm with rubber grip; extentable 30-47cm (only VH series) VH series: release plate Video compatible, rubber surface, 1/4 and 3/8 screws VA-5: release plate Arca Swiss compatible, rubber surface, 1/4 and 3/8 screws Friction panning Friction tilt Counterbalance Head steps steps steps Pan arm BCH-10 3 steps + 0 3 steps + 0 3 steps 3-6kg 1x 30-47cm BCH-20 3 steps + 0 3 steps + 0 7 steps 3-10kg 2x 30-47cm BCH-30 7 steps + 0 7 steps + 0 13 steps 3-18kg 2x 34-51cm Head Material Colour Counterbalance Safety Lock Rotation ø Ball Tilt Height Weight Load BCH-10 Alu black 3-6 Yes 75-65/+90 312 1.80 6 BCH-20 Alu black 3-10 Yes 75-65/+90 338 3.10 10 BCH-30 Alu black 3-18 Yes 100-65/+90 356 4.60 18 BP release plates for BCH Broadcast Video Heads 1x 1/4 screw and 1x 3/8 screw Markings for scale Rubber surface Material: Aluminium Head Material Colour Plate Counterbalance Safety Lock Rotation ø Base Tilt Height Weight Load VA-5 Alu black TY-70A 1 Yes 48-60/+90 83 0.53 3 VH-10 Alu black VP-90 2 Yes 65-60/+90 96 0.92 6 VH-15 Alu black VP-125X 4 Yes 85-60/+90 122 1.70 10 VP release plates for VH Video Heads 1x 1/4 screw and 1x 3/8 screw Rubber surface Material: Aluminium Series Model Material Width Depth Height Weight Compatibility BP BP-90 Alu 51 90 12 66 BCH-10, VH-10, VH-90 BP BP-125 Alu 51 125 12 110 BCH-10/20, VH-10/15, VH-90 BP BP-150L Alu 80 150 12 200 BCH-30 Series Model Material Width Depth Height Weight Compatibility VP VP-90 Alu 51 90 12 66 BCH-10, VH-10, VH-90 VP VP-125X Alu 51 125 12 110 BCH-10/20, VH-10/15, VH-90 12 simply perfect. simply better. 13

SIRUI Video Accessories SIRUI Video Accessories SIRUI HA-77 Telescopic Extension Arm / Video Jib A boom is indispensable for recording with the camera positioned outside the centre of the tripod. Especially for top down, macro, food or reprophotography, the boom is unavoidable. It s also perfect as a Mini Video Jib. The arm can be extended to 77cm, making it extremely versatile. With rotation and 90 tilt to any side, almost any position can be obtained. Thanks to the grippy foam rubber the boom can be safely operated. SIRUI VS-60 Video Slider With its sleek design and extremely compact construction, the SIRUI VS-60 video slider is an absolute must-have for the ambitious film-maker. It is always available as it fits in virtually any camera bag and is assembled in a few steps. Measuring 52cm, the slider allows blur-free and quiet camera movements to be achieved. With two stoppers, the range can be limited, and uneven surfaces pose no problems thanks to the adjustable rubber feet. Telescopic function extends from 50 to 77cm Also usable as a small Video Jib Panorama function, stepless rotating 90 Tilt function, stepless tilting 30.5cm horizontal movement, metric scale Soft foam rubber grip, attachable to either end Load hook for perfect counterbalance Compact closed size: 38.5 x 13cm Rubber feet 15mm adjustable 52cm sliding plate track with rubber stoppers Spirit level for precise alignment Large release plate (63 x 63mm) Model Material Scale ø Tube Rotation Tilt ø Base Width Height Depth Pack size Weight Load HA-77 Alu Yes 24-28 +90 /-90 48 500-700 200-700 90 385 1.19 5 Model Material Sliding Track Length Width Height Pack size Weight Load VS-60 Alu 520 650 180 65 610x75x65 0.96 10 SIRUI VH-90 Quick Release Platform for PS/EPS series The SIRUI VH-90 quick-change platform is specially designed for SIRUI PS/EPS Series Video Monopods. It can also be used for other tripods. The rubberised quick release plate VH-125 lets you secure video DSLRs or camcorders. The platform can be mounted on tripods with a 3/8 inch connection. Safety Lock System with Security Pin Spirit level for precise alignment Locking screw for mounting onto the tripod plate SIRUI VP-350 Lens Rail more support for cameras with large lenses Suitable for SIRUI Heads VH-10, VH-15, BCH-10 and BCH-20 Suitable for SIRUI VH-90 Release Platform TY-70 release plate for mounting a camera is included Lens mount 2x 1/4 (including 1x 3/8 Adapter) Long pad for lens collar, can be moved to ideal position Model Material Length Width Height Weight VH-90 Alu 125 100 22 0,33 Model Material Height adjustment Camera lower edge to lens collar Length Height Weight Load VP-350 Alu 85 25-110 422 145 0.58 10 14 simply suitable. simply better. 15

SIRUI VSK series Video Survival Kits The Multitool for Videographers SIRUI VSK-5 Slider, Dolly, Cage, Lowboy, Rig all in one Slider With the video slider and dolly, smooth tracking shots are easy. An effect that will amaze. Tube length: 680mm, movement: 430mm. VSK-2 VSK-5 Dolly The axles on the dollies are adjustable, so that curves and circles are possible. The rolling resistance of the wheels can be adjusted, allowing the tracking speed to be changed. VSK-2 VSK-5 Cage Using the cage, it is possible to connect various accessories using a 1/4 connection, such as lamps, microphones, etc., such that everything is moved with the camera. VSK-3 VSK-5 Lowboy/Cage with top grip The lowboy has the same features as the cage, including a top-mounted grip. Using the top grip, breathtaking footage from ground level can be shot. VSK-3 VSK-5 Rig All good photo kits need a rig. Mounting the camera and accessories onto the shoulders eases the pressure on the cameraman and steadies the equipment. VSK-3 VSK-5 Model Material Length Width Height Weight Load Slider Alu/Carbon 863 198 85 1.37 8 Dolly Alu 262 165 58 0.63 12 Cage Alu/Carbon 326 209 295 1.22 4 Lowboy Alu/Carbon 326 209 366 1.34 4 Rig Alu/Carbon 849 326 315 1.80 4 Backpack only included with the VSK-5 kit. Backpack open... and action Wherever you want to shoot your striking, action-packed movies, the SIRUI VSK kit is on your back and each element is quickly ready to use. Chases, pans, circles are no longer a problem with the Video Survival Kit. You will especially come to love the practical backpack kit if you want to change location and move to rough terrain. The VSK-2 and VSK-3 are two small kits with a few parts of the VSK-5. The VSK-5 includes all five video tools seen above. Included: VSK-2: 1x dolly, 2x slider endblock, 2x carbon tube 400 x 15mm male/female, 2x carbon tube 400 x 15mm female/ female VSK-3: 1x cage/rig handle unit, 1x camera mount, 1x Z bracket, 1x top bracket, 1x top handle, 1x shoulder pad, 8x carbon tube 200 x 15mm female/female, 4x connecting bolts, 8x end caps VSK-5: 1x backpack with divisions, 1x dolly, 2x slider endblock, 1x cage/rig handle unit, 1x terminal block with camera recorder, 1x Z bracket, 1x top bracket, 1x top grip, 1x shoulder pad, 2x 400x15mm male/female carbon tubes, 2x 400x15mm female/female carbon tubes, 8x 200x15mm female/female carbon tubes, 4x connecting bolts, 8x end caps 16 simply flexible. simply multifunctional. 17

SIRUI VTJ-1.8 for Video and Photography SIRUI VTJ-1.8 Video Travel Jib mobile camera crane Camera mounting plate Two mounting plates are included, one with 1/4, 3/8 and one with a 75mm half bowl. The 75mm half bowl can be used with either video heads (e.g. SIRUI BCH-10, BCH-20) or levelling half balls (e.g. SIRUI Y-75B or RX-75B). Auto-levelling System The auto-levelling system keeps the camera horizontal and guarantees distortion-free images. rotation and 45 tilt Once the weight of the camera has been balanced with the counterweight, stunning pans and 45 tilts can be made. A camera crane for on the move and in the studio The SIRUI VTJ-1.8 Video Travel Jib is a transportable camera crane which can be quickly and conveniently packed into the padded case which is included. The crane will easily lift your heavy video equipment into the air, enabling you to shoot impressive perspectives. Telescopic extension The flexibility of the telescopic extension supports your flexibility in recording. Depending on the space or filming situation, the length of the crane can be adjusted from 1.27m to 2.13m (working length about 1.82m). Monitor platform An additional platform for mounting a monitor is located on the centre axis so that you can see what your camera sees. Additional Features: Counterweight The counterweight is placed at the other end of the crane to ensure gentle camera movements. The counterweight is a rubber doughnut that can be filled with water (up to about 5 litres) or sand. Locking knob The large, strong locking knob is very comfortable and practical to use. Carry case Everything can be stowed into the padded carry case for transport. 10x CARBON Guaranteed SIRUI Quality Model Material Tube material Rotation Tilt Width Height Depth Pack size Weight Load VTJ-1.8 Alu 10x Carbon +45 /-45 1270-1820 225-1090 82 830 2.7 4.5 Included: 1x SIRUI VTJ-1.8, 2x 1/4 and 3/8 mounting plates, 1x 75mm half ball mounting plate, 1x counterweight (fillable), 1x carry case *Tripod not included SIRUI Impressum SIRUI Europe GmbH, c/o nobrainer GmbH, Venloer Str. 301-303, 50823 Köln Tel.: +49 221 94 99 54-50, info@sirui.de Reprinting: SIRUI Europe GmbH Catalogue number: 770720 Date: 20.01.2017 All company names, brand names and trademarks are the property of their respective owners and are used solely to identify and describe SIRUI products. All SIRUI trademarks, logos and photos in SIRUI catalogues, websites, advertisements and other publications (print and digital) are the property of SIRUI. The use of SIRUI trademarks is only permitted with the express written permission of SIRUI. 18 simply compact. simply mobile. 19

SIRUI Video & Broadcast www.sirui.co.uk 2017 SIRUI Europe GmbH