NCIE-Backup & Recovery Implementation Engineer

NCIE-Backup & Recovery Implementation Engineer Number: NS0-510 Passing Score: 800 Time Limit: 120 min File Version: 1.0 http://www.gratisexam.com/ Network Appliance NS0-510 NCIE-Backup & Recovery Implementation Engineer Exam Version: 5.0 Topic 1, Volume A

Exam A QUESTION 1 Which two technologies serve as the basis for SnapVault-based backups? (Choose two.) A. QSM B. VSM C. SyncMirror D. Snapshot Correct Answer: AD /Reference: QUESTION 2 Which NetApp backup and recovery solution is best for backing up remote office heterogeneous data storage? A. Snapshot copies B. SnapManager C. SnapVault D. Open System SnapVault Correct Answer: D /Reference: QUESTION 3 From which three platforms does Open Systems SnapVault support backup and restore? (Choose three.) A. IBM AIX B. SunOS C. HP HP-UX D. Linux E. Windows NT, Windows 2000, and Windows Server 2003 F. SGI IRIX Correct Answer: ACD /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 2 QUESTION 4 What are three components of an Open Systems SnapVault (OSSV) installation? (Choose three.) A. Primary System

B. Secondary System C. OSSV agent installed on the primary system D. OSSV agent installed on the secondary system E. NetApp primary system Correct Answer: ABC /Reference: QUESTION 5 The NearStore VTL provides a masking function to control Host access to virtual devices. A. True B. False Correct Answer: A /Reference: QUESTION 6 The SnapVault Secondary is configured for user access of qtrees via NAS. How do you restore a file? A. by using SnapRestore B. by using the SnapVault GUI C. by users with sufficient privileges D. by only storage administrators with sufficient privileges Correct Answer: C /Reference: http://www.gratisexam.com/ QUESTION 7 "Pass Any Exam. Any Time." - www.actualtests.com 3 A-SIS optimization can be configured at. A. the volume level only B. the aggregate level only C. both the aggregate and volume levels

D. the qtree level Correct Answer: A /Reference: QUESTION 8 What are two applications that can manage Open Systems SnapVault-based backup environments via NDMP? (Choose two.) A. NetApp Protection Manager B. Legato Networker C. Symantec NetBackup D. Syncsort Backup Express Correct Answer: AD /Reference: QUESTION 9 SnapVault is a disk-based backup solution that. (Choose three.) A. enables backup of heterogeneous primary storage systems to a NetApp secondary storage system B. enables restoration of data from a SnapVault secondary storage system, with minimum downtime and better reliability than tape-based backup and restore C. requires both NetApp primary and secondary storage systems D. enables data stored on multiple NetApp storage systems to be backed up to a central secondary system as read-only Snapshot copies CD /Reference: QUESTION 10 When a SnapVault Secondary requests an incremental backup from the primary, the SnapVault Primary creates a new snapshot and compares it to the most recent ONTAP-scheduled snapshot in order to identify the changed data blocks. A. True B. False /Reference:

QUESTION 11 Which two events occur when a volume with qtrees is backed up using SnapVault from Primary to Secondary? (Choose two.) A. Qtrees in Primary are stored as qtrees on Secondary. B. Qtrees in Primary are stored as directories on Secondary. C. Restores of original volume from Secondary to Primary are done as a qtree. D. Restores of original volume from Secondary to Primary are done as a volume. C /Reference: QUESTION 12 What is the maximum number of concurrent A-SIS sessions on a NetApp controller? A. 2 B. 4 C. 8 D. 16 Correct Answer: C /Reference: QUESTION 13 Without the nearstore_option license installed, what are the total concurrent SnapVault transfer streams for the FAS3020/3050? "Pass Any Exam. Any Time." - www.actualtests.com 5 A. 16 for FC drives and 8 for SATA drives B. 8 for FC drives and 16 for SATA drives C. 32 for FC drives and 16 for SATA drives D. 16 for FC drives and 32 for SATA drives Correct Answer: A /Reference: QUESTION 14 Which two NetApp products support heterogeneous storage environments? (Choose two.) A. NearStore VTL B. SnapVault

C. OSSV D. StoreVault Correct Answer: AC /Reference: QUESTION 15 SnapVault supports a multi-vendor storage infrastructure environment. A. True B. False /Reference: QUESTION 16 In which two situations is Snapshot the preferred strategy for backup and recovery? (Choose two.) A. when file systems or raw partitions consist of a single LUN B. when file systems span multiple LUNs via Volume Manager Enterprise or a similar product C. when selective restoration of files within the LUN is a requirement D. when offloading the majority of backup overhead from the host system is a requirement "Pass Any Exam. Any Time." - www.actualtests.com 6 Correct Answer: AD /Reference: QUESTION 17 SnapVault allows data to be. A. centralized for enterprise-wide data management and allows backup applications to control native backup and recovery facilities in NetApp storage systems B. recovered from a corrupted database, application, or damaged file systemin less than a minute, regardless of the size of the volume being restored C. backed up via Snapshot and transferred on a scheduled basis to a destination NearStore appliance D. virtualized and tightly integrated with Microsoft NTFS, providing a layer of abstraction between application data and its physical storage Correct Answer: C /Reference:

QUESTION 18 What are three NetApp backup and recovery solutions based on Snapshot technology? (Choose three.) A. SnapVault B. OSSV C. VTL D. SnapManager products Correct Answer: ABD /Reference: QUESTION 19 Tape backups are widely used because they are considered the most secure form of media backup. A. True B. False "Pass Any Exam. Any Time." - www.actualtests.com 7 /Reference: QUESTION 20 What is RTO? A. the amount of time that an organization will NOT have access to lost data while the data is being recovered B. the amount of time that an organization will take to recover their data C. the time-out period for remote device access D. the recorded time of the data outage Correct Answer: A /Reference: QUESTION 21 Which Open Systems SnapVault tool/command determines the amount of space required on the primary system for transfers? A. snapvault estimator B. svestimator C. svspace_estimator D. snapvault installcheck

/Reference: QUESTION 22 What percentage of the source volume does the destination volume need to be to ensure that there is enough storage space available on the destination volume to store the backup before the A-SIS deduplication process begins? A. 20% B. 50% C. 75% D. 100% "Pass Any Exam. Any Time." - www.actualtests.com 8 Correct Answer: D /Reference: QUESTION 23 Which Open Systems SnapVault(OSSV) command can be used to control which client hosts may back up to OSSV secondary storage? A. options snapvault.clients B. options snapvault.access C. ossv host.access D. options ossv.hosts /Reference: QUESTION 24 When deploying a NearStore VTL into a NetBackup environment, why is it important to know the version of NetBackup being utilized? A. It determines the type of virtual library to be emulated. B. It determines whether a mapping file is required. C. It determines the disk compression ratio to be expected. D. It determines the maximum number of virtual tape drives that can be configured. /Reference:

QUESTION 25 When deploying a NearStore VTL, which two steps should be completed before configuring the VTL through the GUI? (Choose two.) A. connect the Fibre Channel cables according to the Installation and Setup Instructions Guide B. set the IP address and subnet mask C. configure a virtual library and virtual tape drives D. configure disk RAID groups E. delete this option "Pass Any Exam. Any Time." - www.actualtests.com 9 Correct Answer: AB /Reference: QUESTION 26 It is not necessary to understand the backup application when designing a VTL solution. A. True B. False /Reference: QUESTION 27 What are two ways to restore data from a SnapVault for NetBackup volume? (Choose two.) A. use NetBackup Administration Console B. use the SnapVault restore command C. access the SnapVault for NetBackup volume through CIFS or NFS and copy the data D. run a restore command from CLI on the NetApp secondary storage system Correct Answer: AC /Reference: QUESTION 28 Which NearStore VTL feature allows a backup to remain on the disks of the NearStore VTL even after the virtual tape has been ejected by the backup application? A. tape cloning B. deferred tape cloning C. shadow tapes D. virtual tape retention policy

Correct Answer: C /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 10 QUESTION 29 Which TCP ports should be open on a firewall to enable SnapVault backups and restores between Primary and Secondary with NDMP-based backup management? A. 10000 and 10001 B. 10000 and 10566 C. 10023 and 10566 D. 12564 and 12565 /Reference: QUESTION 30 A storage pool is used by a NearStore VTL to. A. segregate backups onto different disk drives B. provide additional disk space to backups C. provide redundant storage space (data mirroring) D. create a staging area for physical tape creation Correct Answer: A /Reference: QUESTION 31 Given the following: Secondary> snapvault snap sched -x sec_vol sv_hourly 11@mon-fri@7-18 The -x parameter causes. A. SnapVault to create a new snapshot of the associated qtree on the secondary volume B. SnapVault to ensure that all qtrees on the Secondary are updated from their associated primary system qtrees before the snapshot is taken C. SnapVault to execute the "snapvault snap sched" command at a given schedule D. SnapVault-created snapshots to be deleted on the secondary volume "Pass Any Exam. Any Time." - www.actualtests.com 11

/Reference: QUESTION 32 Which command is used to alter the characteristics of a SnapVault relationship, including the transfer speed, the number of re-tries, and the primary and secondary paths? A. snapvault change B. snapvault modify C. snapvault alter D. snapvault initiate /Reference: QUESTION 33 What is the final step to close out a SOW-based project? A. test the environment B. have the customer sign the acceptance form C. have the customer sign the Purchase Order form D. have the customer sign the acceptance form and then create required documentation /Reference: QUESTION 34 In SnapMananger for Exchange, the best practice is to have at least one full database backup that is verified every hours. A. 6 B. 12 C. 24 D. 48 Correct Answer: C /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 12 QUESTION 35 Where are SnapVault logs located?

A. /etc/logs/snapvault B. /etc/snapvault.log C. /etc/logs/snapmirror D. /etc/snapvault/logs Correct Answer: C /Reference: QUESTION 36 Which Nearstore VTL CLI command can be used to obtain diagnostic information? A. diag show B. diag download C. display diag D. download diag Correct Answer: A /Reference: QUESTION 37 NearStore VTL Tape Smart sizing is similar to Disk Compression. A. True B. False /Reference: QUESTION 38 "Pass Any Exam. Any Time." - www.actualtests.com 13 The Disk Compression attribute is automatically enabled on virtual tapes imported from physical tapes on NearStore VTL running on version 5.2.x. A. True B. False /Reference: QUESTION 39

Which two are required to upgrade from NearStore VTL 300 to VTL 700? (Choose two.) A. license for ACSLS B. license for DTC C. disk HBA D. recabling of disk shelves Correct Answer: CD /Reference: QUESTION 40 Which NearStore VTL CLI command can be used to display the revision level of the VTLOS operating system? A. vtlos show version B. os version show C. vtl version show D. appliance version Correct Answer: D /Reference: QUESTION 41 Which two statements are true about the use of NetBackup Shared Service Option (SSO) with a NearStore VTL? (Choose two.) "Pass Any Exam. Any Time." - www.actualtests.com 14 A. It may cause a physical drive connected to a VTL to become unavailable to other hosts. B. It does not function with virtual tape drives. C. It requires a license at additional cost. D. It is not recommended, because a virtual tape drive can be assigned to each host. Correct Answer: CD /Reference: QUESTION 42 Open Systems SnapVault allows for backups of data residing on. (Choose two.) A. volume mount points B. internal disks C. network shares D. SAN disks, both FCP and iscsi

D /Reference: QUESTION 43 Which benefit do two compression cards provide? A. faster single stream throughput B. faster aggregated stream throughput C. double the compression ratio D. better tape smart-sizing /Reference: QUESTION 44 Which two factors should be evaluated when determining the performance requirements of a VTL? (Choose two.) A. the amount of data to be backed up B. the amount of time in the backup window "Pass Any Exam. Any Time." - www.actualtests.com 15 C. the number of backup servers D. the number of client hosts to be backed up Correct Answer: AB /Reference: QUESTION 45 When using backup software to manage a tape device connected to an FAS controller, the tape device should be configured in the backup application as. A. a local tape device B. an NDMP tape device C. a remote-connected tape device D. a SCSI-attached tape device /Reference: QUESTION 46

What are six key activities performed during the discovery phase for SnapVault-based backup recovery solution implementation? (Choose six.) A. review existing backup infrastructure and backup applications in use B. establish retention periods and backup schedules for each dataset C. configure and activate SnapVault D. record change rates for each dataset requiring backups (per day or hour) E. record existing network infrastructure and available network bandwidth for backups F. develop a design to meet the backup requirements G. acquire RPO granularity and RTO for each dataset for local and remote backups H. identify datasets for backup Correct Answer: /Reference: Answer: A,B,D,E,G,H QUESTION 47 A customer requirement to back up Windows 2000 Server and Windows 2003 Server operating systems can be implemented with Open Systems SnapVault. "Pass Any Exam. Any Time." - www.actualtests.com 16 A. True B. False Correct Answer: A /Reference: QUESTION 48 Which two statements are true about data retrieval from tape? (Choose two.) A. It is the slowest data recovery method. B. It is faster than restores from disk-based backups. C. Users are offline. D. It is the easiest and preferred method. Correct Answer: AC /Reference: QUESTION 49 What are two key reasons for a customer to purchase a NetApp VTL? (Choose two.) A. to eliminate tape

B. to eliminate operators C. to eliminate backup applications D. to manage shrinking backup windows Correct Answer: AD /Reference: QUESTION 50 Which three pieces of information must be obtained during the discovery phase of a backup and recovery solution? (Choose three.) A. network bandwidth B. datasets to be backed up C. offsite storage location D. backup window "Pass Any Exam. Any Time." - www.actualtests.com 17 Correct Answer: ABD /Reference: QUESTION 51 Which three factors influence secondary storage capacity planning for SnapVault-based backup and restore solutions? (Choose three.) A. size of the dataset B. rate of change of the dataset C. Snapshot schedule D. retention policy for Snapshot Correct Answer: ABD /Reference: QUESTION 52 Which SnapVault command displays detailed information on the most recent SnapVault transfer and Snapshot copy activity? A. snapvault status -l B. snapvault transfer C. snapvault stats -v D. snapvault usage -v Correct Answer: A

/Reference: QUESTION 53 Which two prerequisites must be met for the tape restore command to run successfully? (Choose two.) A. For an incremental restore, you only need the last tape. B. You must know which tape device was used during the backup. C. For an incremental restore, you need all the tapes in the backup chain. D. You need a tape drive that is available and compatible with the tape to be restored from. "Pass Any Exam. Any Time." - www.actualtests.com 18 Correct Answer: CD /Reference: QUESTION 54 How many levels of incremental backups can be performed with ndmpcopy? A. 1 B. 3 C. 5 D. 9 /Reference: QUESTION 55 Which NearStore VTL CLI command can be used to display the revision level of the VTLOS operating system? A. vtlos show version B. os version show C. vtl version show D. appliance version Correct Answer: D /Reference: QUESTION 56 Which Open Systems SnapVault command can be run on the primary system to verify successful installation and ensure that the services are running properly? A. ossvcheckinstall

B. ossvverifyinstall C. svconfigcheck D. svinstallcheck Correct Answer: D /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 19 QUESTION 57 Which two tasks should be completed as part of the post-implementation phase of a project? (Choose two.) A. update the Build Guide B. leave your contact number C. set aside time to conduct training and transfer of Information D. clean up the configuration and let the customer build the configuration afresh Correct Answer: AC /Reference: QUESTION 58 Which two tools should you use to test and demonstrate the performance of a NearStore VTL? (Choose two.) A. TapePerformanceUtility B. dd C. HPTapePerf D. ndmpcopy C /Reference: QUESTION 59 When a SnapVault Secondary requests an incremental backup from the primary, the SnapVault Primary creates a new snapshot and compares it to the most recent ONTAP-scheduled snapshot in order to identify the changed data blocks. A. True B. False /Reference:

"Pass Any Exam. Any Time." - www.actualtests.com 20 QUESTION 60 Which four statements are true about a qtree SnapVault relationship when a valid snapvault start command is issued with proper arguments? (Choose four.) A. The secondary storage system requests an initial baseline transfer from the primary volume. B. The primary storage system creates a baseline snapshot on the volumes containing the qtree that needs to be backed up to the Secondary. C. The qtree data is transferred from an ONTAP-created Snapshot to the volume on the Secondary. D. Once the baseline transfer is completed to the secondary qtree, the secondary storage system creates a baseline Snapshot of the volume containing the replicated qtree. E. Incremental updates are processed by creating a new Snapshot at the Secondary and comparing it with the primary baseline Snapshot to identify data that needs to be transferred to the Secondary. F. Baseline Snaphot copies created on Primary and Secondary are critical for processing incremental updates. Correct Answer: ABDF /Reference: QUESTION 61 Which advantage does a NearStore VTL provide when deployed with storage devices running NDMP? A. A separate virtual tape drive can be configured for each device running NDMP. B. All of the devices running NDMP must share the same virtual tape drive. C. A virtual tape drive can support multiple NDMP streams simultaneously. D. NDMP can be used to manage the NearStore VTL device configuration. Correct Answer: A /Reference: QUESTION 62 What is a benefit of deploying SnapVault for backups? "Pass Any Exam. Any Time." - www.actualtests.com 21 A. transfers data over Fibre Channel B. performs incremental forever backups C. no need to perform an initial full backup D. improves tape restore performance /Reference:

QUESTION 63 The SnapVault Secondary is configured for user access of qtrees via NAS. How do you restore a file? A. by using SnapRestore B. by using the SnapVault GUI C. by users with sufficient privileges D. by only storage administrators with sufficient privileges Correct Answer: C /Reference: QUESTION 64 Which tape backup method has the least performance impact on the primary FAS storage system? A. NDMP backup from primary storage system to SAN-attached tape drive B. NDMP backup from primary storage system to direct-attached SCSI tape drive C. SnapVault to secondary storage system and then backup to tape drive D. SnapVault to direct-attached Fibre Channel tape drive Correct Answer: C /Reference: QUESTION 65 Which statement is true about SnapVault backups replicating all of the file permissions and access control lists held by the original data? "Pass Any Exam. Any Time." - www.actualtests.com 22 A. Administrators can allow users to do their own restores safely. B. Users authorized to access a file on the original file system will not have access to the backup copies of that file. C. It allows restores by any users, due to its inherent user-friendly architecture. D. Only administrators can perform restores of user data from backups. Correct Answer: A /Reference: QUESTION 66 SnapVault is a disk-based backup solution that. (Choose three.) A. enables backup of heterogeneous primary storage systems to a NetApp secondary storage system B. enables restoration of data from a SnapVault secondary storage system, with minimum downtime and better reliability than tape-based backup and restore

C. requires both NetApp primary and secondary storage systems D. enables data stored on multiple NetApp storage systems to be backed up to a central secondary system as read-only Snapshot copies CD /Reference: QUESTION 67 What are three components of an Open Systems SnapVault (OSSV) installation? (Choose three.) A. Primary System B. Secondary System C. OSSV agent installed on the primary system D. OSSV agent installed on the secondary system E. NetApp primary system Correct Answer: ABC /Reference: QUESTION 68 Which three can be used for backups? (Choose three.) "Pass Any Exam. Any Time." - www.actualtests.com 23 A. SnapLock B. SnapMirror C. SnapVault D. Snapshot copies CD /Reference: QUESTION 69 Which two events occur when a volume with qtrees is backed up using SnapVault from Primary to Secondary? (Choose two.) A. Qtrees in Primary are stored as qtrees on Secondary. B. Qtrees in Primary are stored as directories on Secondary. C. Restores of original volume from Secondary to Primary are done as a qtree. D. Restores of original volume from Secondary to Primary are done as a volume. C

/Reference: QUESTION 70 Which two technologies serve as the basis for SnapVault-based backups? (Choose two.) A. QSM B. VSM C. SyncMirror D. Snapshot Correct Answer: AD /Reference: QUESTION 71 Without the nearstore_option license installed, what are the total concurrent SnapVault transfer streams for the FAS3020/3050? A. 16 for FC drives and 8 for SATA drives "Pass Any Exam. Any Time." - www.actualtests.com 24 B. 8 for FC drives and 16 for SATA drives C. 32 for FC drives and 16 for SATA drives D. 16 for FC drives and 32 for SATA drives Correct Answer: A /Reference: QUESTION 72 What is the first command used to initiate a SnapVault transfer from primary to secondary storage? A. snapvault start B. snapvault snap schedule C. snapvault initiate D. snapvault restore Correct Answer: A /Reference: QUESTION 73 A NetApp SnapVault solution requires a license on. A. the primary system only

B. the secondary system only C. both the primary and secondary systems D. neither the primary nor secondary systems Correct Answer: C /Reference: QUESTION 74 What is part of a Build Guide for SnapVault and Open Systems SnapVault? A. operational guidelines B. test plan C. SAN topology diagram "Pass Any Exam. Any Time." - www.actualtests.com 25 D. implementation details Correct Answer: D /Reference: QUESTION 75 Which command is used to monitor SnapVault snapshot creation and deletion? A. snap sched B. snapshot list C. snap list D. snapvault status Correct Answer: C /Reference: QUESTION 76 Which two NearStore VTL operations can be used to automatically create virtual tapes with labels that match the physical tapes in a physical tape library? (Choose two.) A. create new virtual tapes B. inventory physical library C. create virtual tapes using barcodes D. import tapes from physical inventory Correct Answer: CD

/Reference: QUESTION 77 Which Data ONTAP command will show all tape information? A. sysconfig -a B. sysconfig -m C. sysconfig -t D. sysconfig -v "Pass Any Exam. Any Time." - www.actualtests.com 26 Correct Answer: C /Reference: QUESTION 78 Which statement is true when using Snapshot copies to take hot backups of an Oracle database? A. Users cannot access the database during the backup. B. Users may see a performance degradation during the backup. C. No interaction with the database is necessary. D. The database must be shut down for less than a minute. /Reference: QUESTION 79 What is the standard Data ONTAP command for displaying tape statistics? A. storage tape stats (tapename) B. tape stats storage (tapename) C. stats storage tape (tapename) D. storage stats tape (tapename) Correct Answer: D /Reference: QUESTION 80 What happens when Open Systems SnapVault resync after Break/Restore allows the user to resynchronize a relationship? A. It requires a new baseline transfer. B. It does not require a new baseline transfer.

C. It copies the data to the secondary system using an OS-based copy tool. D. It copies the relevant snapshot to the secondary system. /Reference: http://www.gratisexam.com/ "Pass Any Exam. Any Time." - www.actualtests.com 27 QUESTION 81 Which tool is used to perform the basic configuration of the Open Systems SnapVault client agent on a Windows 2003 system? A. OSSVconfig.exe B. svsetup.bat C. ossvadmin.exe D. svconfigurator.exe Correct Answer: D /Reference: QUESTION 82 What is the license requirement for enabling SnapVault backups on NetApp storage? A. sv_ontap_pri only B. snapvault_pri only C. sv_ontap_pri and sv_ontap_sec D. snapvault_pri and snapvault_sec Correct Answer: C /Reference: QUESTION 83 What is the maximum number of simultaneously active virtual tape drives supported on a NearStore VTL 700 running VTLOS 5.2.x? A. 16 B. 32

C. 64 D. 128 Correct Answer: C /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 28 QUESTION 84 What are three accurate descriptions of RPO? (Choose three.) A. the length of time that the data are recoverable B. the time between the last available recoverable backup and the time a disruption could potentially occur C. a critical requirement for planning backup and recovery environments D. a point in time to which data must be restored in order to meet the Service Level Agreement CD /Reference: QUESTION 85 Which hardware technology is positioned in the NetApp backup and recovery portfolio? A. SnapVault for NetBackup B. EnterpriseVault C. Virtual Tape Library D. ReplicatorX Correct Answer: C /Reference: QUESTION 86 Which backup application supported by NetApp NearStore VTL is designed for an "incremental forever" backup strategy? A. Symantec NetBackup B. Tivoli Storage Management C. CommVault Galaxy D. EMC NetWorker

/Reference: QUESTION 87 "Pass Any Exam. Any Time." - www.actualtests.com 29 What is RPO? A. recovery plan options B. remote process object C. recovery point obstacle D. recovery point objective Correct Answer: D /Reference: QUESTION 88 What is the advantage of performing A-SIS on NetApp NearStore storage systems? A. eliminates data corruption B. increases performance during de-duplication C. reduces backup time D. reduces storage space Correct Answer: D /Reference: QUESTION 89 The terms RPO and RTO are relevant only for disaster recovery solutions. A. True B. False /Reference: QUESTION 90 What is multiplexing in a tape environment? A. writing a large backup stream to multiple tape drives B. multiple backup streams writing to a single tape drive C. multiple backup servers writing to multiple tape drives "Pass Any Exam. Any Time." - www.actualtests.com 30 D. writing multiple backup streams from multiple clients to multiple tape drives

/Reference: QUESTION 91 Which four pieces of critical information should be identified during the discovery phase of a SnapVault-based implementation project to enable proper solution design? (Choose four.) A. datasets that are backup candidates and their sizes B. frequency of backups for each dataset C. tape library model and compatibility D. change rate of each dataset E. backup window and available network bandwidth Correct Answer: ABDE /Reference: QUESTION 92 With Open Systems SnapVault, the secondary storage system must be running. A. Data ONTAP B. AIX, Windows, or HP-UX C. Solaris, Windows, or LINUX D. AIX, HP-UX, IRIX, or Windows Correct Answer: A /Reference: QUESTION 93 What is the maximum number of front-end ports a fully loaded NearStore VTL 700 can have? A. 3 B. 4 C. 8 D. 12 "Pass Any Exam. Any Time." - www.actualtests.com 31 /Reference:

QUESTION 94 Which function directly creates a physical tape using a VTL? A. export or clone function B. tape duplication function C. shadow tape function D. copy using backup server function Correct Answer: A /Reference: QUESTION 95 The Service Level Agreement defines the customer's backup infrastructure and architecture. A. True B. False /Reference: QUESTION 96 A customer's current backup application is important to know for Open Systems SnapVault deployments. A. True B. False /Reference: QUESTION 97 "Pass Any Exam. Any Time." - www.actualtests.com 32 In a SnapVault and Open Systems SnapVault implementation, performance can be negatively impacted if. A. the dataset is database-related data B. the dataset in the relationship has a large number of small files C. the dataset in the relationship has a small number of large files D. the secondary storage system contains more directories than the primary storage system /Reference:

QUESTION 98 Which three pieces of information do you need from a customer site to build a backup and recovery plan? (Choose three.) A. data encoding method B. RPO C. RTO D. amount of data CD /Reference: QUESTION 99 In a traditional file-based backup environment, a small change in a file results in only the changed blocks being backed up during a Differential Backup. A. True B. False /Reference: QUESTION 100 What should you follow when setting up the hardware for a NearStore VTL? "Pass Any Exam. Any Time." - www.actualtests.com 33 A. NetApp FAS System Configuration Guide B. NearStore VTL Installation and Setup Instructions C. System Administration Guide D. V-Series Installation and Setup Instructions /Reference: Topic 2, Volume B QUESTION 101 Which three pieces of information are needed to determine the throughput required for backups? (Choose three.) A. amount of data B. duration of backup window C. type of target media

D. capacity of target media Correct Answer: ABC /Reference: QUESTION 102 Which two are required to upgrade from NearStore VTL 300 to VTL 700? (Choose two.) A. license for ACSLS B. license for DTC C. disk HBA D. recabling of disk shelves Correct Answer: CD /Reference: QUESTION 103 What is the correct method for creating a new storage policy? "Pass Any Exam. Any Time." - www.actualtests.com 34 A. name the policy, assign a disk library, assign a MediaAgent, enter the retention criteria, select or add a DataFabric Manager server B. name the policy, assign a disk library, assign a VSA, enter the policy schedule, select or add a DataFabric Manager server C. name the policy, assign a resource pool, assign a policy schedule, enter the retention criteria, select or add a DataFabric Manager server D. name the policy, assign a resource pool, assign a retention period, select or add a DataFabric Manager server Correct Answer: A /Reference: QUESTION 104 You are an administrator for a company with multiple sites and limited available WAN bandwidth. You want to enable SnapMirror to protect data from a single site failure. Which two tools can you use to estimate the size of each incremental update? (Choose two.) A. df B. vol status C. snap delta D. OnCommand System Manager E. snap list -d

Correct Answer: CD /Reference: QUESTION 105 Provisioning policies define the desired features of NAS or SAN storage for datasets. Which three features can you manage by using a Provisioning Policy? (Choose three.) A. Reliability/Availability B. Controller Options settings C. Space Management settings D. Monitoring Metrics and Alerting settings E. Appropriate action when a storage container needs more space Correct Answer: ACE /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 35 QUESTION 106 You are planning data protection for a customized Microsoft SharePoint deployment. In order to restore a SharePoint farm, certain files must be backed up. These include SQL master and system database files, SharePoint content database files, and SharePoint configuration database files. Which two additional files must you back up in order to restore a SharePoint farm? (Choose two.) A. system state files B. SQL log files C. SQL master and cascading style sheets D. virtual memory cache C /Reference: QUESTION 107 Which technology does SnapProtect use to index LUN contents? A. FlexClone B. LUN Clone C. SnapClone D. AggrClone

/Reference: QUESTION 108 Which two commands should you use to register your Windows system with Protection Manager? (Choose two.) A. dfm network add B. dfm ndmp add C. dfpm install client D. dfm host add Correct Answer: AD /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 36 QUESTION 109 Click the Exhibit button. Based on information provided in the exhibit, which statement is true about virtual machines spanning multiple datastores? A. Virtual machines cannot span multiple datastores. B. Virtual machines should not be configured to span multiple datastores. C. Some virtual machines can span multiple datastores, but you can exclude datastores from the backup. D. Some virtual machines can span multiple datastores, but you cannot exclude datastores from the backup. Correct Answer: C /Reference: QUESTION 110 The SnapVault software requires snapshots. This leaves snapshots for scheduled or manual snapshot creation. A. 10; 250 B. 4; 251 C. 1; 254 D. 8; 247

/Reference: QUESTION 111 "Pass Any Exam. Any Time." - www.actualtests.com 37 Once a mounted backup is no longer needed, the backup should be unmounted for which two reasons? (Choose two.) A. to recover backup content B. to improve backup performance C. to change the state of the Snapshot copy from usy?to ormal?to change the state of the Snapshot copy from?usy?to?ormal D. to enable you to delete that backup or any of the preceding Snapshot copies Correct Answer: CD /Reference: QUESTION 112 Which statement is true about NetApp System Manager? A. NetApp System Manager is a tool used to monitor, but not configure NetApp storage systems. B. NetApp System Manager is a tool used to configure, but not to monitor NetApp storage systems. C. NetApp System Manager is a member of the OnCommand suite and can be used to configureand monitor NetApp storage systems. D. NetApp System Manager is a tool installed with each NetApp storage system to configure and monitor storage systems individually. Correct Answer: C /Reference: QUESTION 113 The Add Resource Pool wizard allows you to select which two to be members of a resource pool? (Choose two.) A. qtrees B. entire storage systems C. any host running SnapDrive D. aggregates D

/Reference: "Pass Any Exam. Any Time." - www.actualtests.com 38 QUESTION 114 Using Protection Manager, you configure local Snapshot copies using a Protection Policy. What must the Protection Policy contain? A. mirror B. remote backup C. local backup on primary D. Snapshot on primary E. backup Snapshots Correct Answer: C /Reference: QUESTION 115 What are three NetApp backup and recovery solutions, based on Snapshot technology? (Choose three.) A. SnapVault B. OSSV C. VTL D. SnapManager products Correct Answer: ABD /Reference: QUESTION 116 In SnapProtect, what should you do to confirm that a backup completed successfully? A. click the Job Controller tab and read about the event B. expand Storage Policies and click the Status button to see the status of the event C. click Schedule Policies and look for the Completed Alert about the event D. right-click the name of the Storage Policy, select All Tasks, select Run Data Verification, and select Run Immediately Correct Answer: D /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 39 QUESTION 117

In the SnapProtect solution, which three methods can be used to replicate data to tape? (Choose three.) A. NDMP dump B. tape streaming through MediaAgent software C. SMTape D. tape streaming through DataFabric Manager server E. tape streaming through the SnapProtect CommServe server Correct Answer: ABC /Reference: QUESTION 118 When using Protection Manager, you can restore data to which two locations? (Choose two.) A. the data's original location B. any NDMP-enabled NAS array C. a new location on an existing volume D. a new qtree to be created during restore E. a new aggregate to be created during restore Correct Answer: AC /Reference: QUESTION 119 You used the NetApp Unified Sizer to determine disk space requirements for a customer and now you want to show them the raw or physical disk space compared to effective or usable disk space. Which utility in the NetApp OnCommand System Manager shows physical disk space compared to effective disk space? A. Disks B. Volumes C. Aggregates D. LUNs Correct Answer: A /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 40 QUESTION 120 A customer has a high latency link (greater than 50ms). Which two technologies could successfully establish a relationship from the source storage controller to the destination storage controller? (Choose two.) A. qtree SnapMirror

B. synchronous SnapMirror C. semi-synchronous SnapMirror D. volume SnapMirror E. SnapMirror to Tape Correct Answer: AD /Reference: QUESTION 121 You want to quickly recover your data after the complete destruction of your data center in a flood. You are logged on to the NetApp secondary storage system. Which command quickly provides you the list of primary data and the secondary location? A. snapvault status B. snapvault locations C. snapvault destinations D. snapvault source destination Correct Answer: A /Reference: QUESTION 122 A customer wants to seed a qtree SnapMirror relationship without sending the initial baseline over the WAN. Which tool should you recommend the customer use? A. NFS B. LREP C. NDMP D. SnapMirror to Tape /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 41 QUESTION 123 How many valid dump levels can be set with ndmpcopy? A. 0, 1, 2, 3 B. 0, 1, 2 C. 0, 1, 2, 3, 4, 5 D. 0, 1, 2, 3, 4, 5, 6, 7, 8, 9

/Reference: QUESTION 124 For a new SnapMirror relationship, you must create the destination before initializing the relationship. A. qtree; qtree B. volume; qtree C. volume; volume D. aggregate; volume Correct Answer: C /Reference: QUESTION 125 What is RTO? A. the amount of time it takes for an organization to discover that critical data is not available B. the amount of time that an organization plans to take to recover their data C. the time-out period for remote device access D. the recorded time of the data outage /Reference: QUESTION 126 What information is needed to determine the throughput required for backups? (Choose three.) "Pass Any Exam. Any Time." - www.actualtests.com 42 A. amount of data B. duration of backup window C. type of target media D. capacity of target media Correct Answer: ABC /Reference: QUESTION 127

Which two events occur immediately after the snapvault start command finishes initializing a backup relationship between a primary and secondary storage system? (Choose two.) A. The secondary storage system creates a Snapshot copy of the volume containing the replicated qtree. B. The secondary storage system resets the Snap schedule to plan for the SnapVault update operation. C. If deduplication is licensed and enabled for the secondary volume, the secondary storagesystem automatically begins a deduplication operation. D. The primary storage system creates a baseline Snapshot copy of the volume containing the replicated qtree. Correct Answer: AC /Reference: QUESTION 128 A long-time NetApp customer is virtualizing their data centers globally and data protection is their most urgent consideration. Which NetApp storage management solution can help you to size primary and secondary aggregates to establish adequate secondary storage space for their enterprise-wide disaster recovery plan? A. OnCommand System Manager B. Data ONTAP command line utilities C. NetApp SnapProtect Solution D. OnCommand Core Package, which includes the OnCommand Console, DataFabric Manager server, and the Operations Manager Console Correct Answer: D /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 43 QUESTION 129 Click the Exhibit button.

You are configuring a Provisioning Policy for secondary storage. The secondary storage must be clustered and protected from double disk RAID group failure. Which two settings are necessary? (Choose two.) A. Storage High Availability B. Storage Controller Failure C. Storage Subsystem Failure D. Disk failure protection - RAID-DP E. Disk failure protection - Externally managed RAID D /Reference: QUESTION 130 Where can you view the aggregate overcommit value for a resource pool? (Choose two.) A. dfpm respool list command B. Dataset Properties "Pass Any Exam. Any Time." - www.actualtests.com 44 C. Resource Pool Space Threshold setting D. Total Dataspace tab

Correct Answer: AC /Reference: QUESTION 131 How does user access to the SnapVault secondary volume compare with access to the original data? A. SnapVault preserves the original file permissions and access control lists so that administrators can safely allow users to have access to the SnapVault secondary volume to restore their own data. B. Users authorized to access a file on the original file system do not have access to the backup copies of that file until the administrator restores the file from the secondary back to the primary storage system. C. If the administrator allows access to the SnapVault secondary, the secondary allows restores by any users, due to its inherent user-friendly architecture. D. Only administrators can perform restores of user data from backups, users CANNOT access the SnapVault secondary. Correct Answer: A /Reference: QUESTION 132 What are two requirements for SnapMirror network compression? (Choose two.) A. You must have a Compression License. B. You must add the compression=enable option to an entry in the snapmirror.conf file. C. You must configure a SnapMirror Multiplex Connection Name. D. You must set the filer option snapmirror.compression to n.?you must set the filer option snapmirror.compression to?n. C /Reference: QUESTION 133 Which command should you use to view SnapVault snapshots? "Pass Any Exam. Any Time." - www.actualtests.com 45 A. snap sched B. snapshot list C. snap list -q D. snapvault status

Correct Answer: C /Reference: QUESTION 134 You are planning to install SnapManager for Microsoft SharePoint Server. On which servers should you install the SnapManager manager software and the SnapManager Agent software? A. SnapManager Manager and Agent software must be installed on the same host. B. SnapManager Manager and Agent software cannot be installed on the same host. C. SnapManager Manager and Agent software must both be installed on the same host as the SharePoint Administrator software. D. SnapManager Manager software must be installed on the same host as the SharePoint Administrator software. Correct Answer: D /Reference: QUESTION 135 Where can you see the data not managed by a protection policy in the NetApp Management Console? A. Data > OSSV B. Data > Unprotect Data C. Data > Hosts > Volumes D. Data > External Relationships /Reference: QUESTION 136 What are two reasons for mounting the contents of a backup to a VMware ESX server? (Choose two.) "Pass Any Exam. Any Time." - www.actualtests.com 46 A. to verify the content using the vsphere Client B. to use the vsphere Client to restore lost datastores C. to enhance performance of the guest virtual machines D. to convert or upgrade guest virtual machines Correct Answer: AB /Reference:

QUESTION 137 Which four actions would take place during a data-protection assessment? (Choose four.) A. determine if a proof of concept phase is needed B. agree on the Professional Service SOW and purchase order as early as possible C. consider only NetApp Snapshot, SnapMirror, and SnapVault technology, regardless of the existing backup solutions D. analyze customer data protection backup and disaster recovery goals compared to NetApp data protection technology E. gather information about the customer's existing infrastructure F. visit executive Briefing Center so experts can provide education to the customer, concerning NetApp offerings Correct Answer: ADEF /Reference: QUESTION 138 You are designing data protection for a Microsoft SQL server. Which NetApp data protection software solution should you use to migrate application data from local or third-party SAN LUNs to LUNs on the NetApp storage system? A. OnCommand System Manager B. SnapManager for Microsoft SQL C. SnapProtect CommServe D. SnapManager for Exchange /Reference: QUESTION 139 You are designing storage for continuous replication environments. Which statement is true about "Pass Any Exam. Any Time." - www.actualtests.com 47 placement of active and target database and log LUNs? A. You place them on separate controllers. B. You place them on separate volumes and separate aggregates of the same controller. C. You place them on the same aggregates of the same storage controller to improve continuous replication performance and mitigate against network bottlenecks. D. You place them on the same storage controller to improve continuous replication performance; however, the storage controller must be configured for high availability to minimize risk. Correct Answer: A

/Reference: QUESTION 140 Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration? A. filer1:vol1 filer2:vol1 - * * * * B. filer1:vol1 filer2:vol1 - - - - - C. filer1:vol1 filer2:vol1-15,30 * * * D. filer1:vol1 filer2:vol1 * * * * * /Reference: QUESTION 141 When utilizing the NetApp Management Console to configure Protection Manager, which two methods should you use to license SnapVault? (Choose two.) A. from Protection Manager, select the Dashboard view, modify the SnapVault License settings B. from Protection manager, navigate to the Hosts window, select the storage system, and click Diagnose C. from Protection Manager, navigate to Data tab, select any associated dataset, click Edit, add the SnapVault License code, and click OK D. from Protection Manager, navigate to the Policies tab, select the appropriate Protection Policy, click Edit, add the SnapVault License code, and click OK E. From Protection Manager, navigate to the Hosts window, select the storage system, click Edit, add the SnapVault License code, and click Add "Pass Any Exam. Any Time." - www.actualtests.com 48 E /Reference: QUESTION 142 When sizing high-availability workloads, how should you plan for failover performance? A. size high-availability workloads so performance remains the same even when only one controller is operational as during normal operation B. size high-availability workloads with the expectation there is some degree of performance degradation when only one controller is operational C. size high-availability workloads so performance meets the customer's expectations when there is failover and only one controller is operational D. size high-availability workloads with the understanding there is not a way to adjust for performance degradation when only one controller is operational

Correct Answer: C /Reference: QUESTION 143 Which NetApp replication technology provides failover/failback capabilities at the volume level? A. OSSV B. SnapMirror C. SnapVault D. SnapRestore /Reference: QUESTION 144 A customer wants to maintain a separate Snapshot retention policy for data at a primary site and a secondary site. Which solution should you recommend? A. SnapRestore B. SnapVault "Pass Any Exam. Any Time." - www.actualtests.com 49 C. SnapDiff D. SnapLock /Reference: QUESTION 145 Which statement is true about the NetApp Unified Applications Sizer tool? A. The tool is installed on each application server to estimate sizing requirements of the installed application. B. The output files of application-specific sizing tools are uploaded into the unified tool to calculate the total sizing requirement. C. The calculated sizing requirements of all of the application servers are entered into the tool to calculate the total sizing requirement. D. The tool is installed on only one application server and the unified size requirements for up to ten other application servers are calculated. /Reference:

QUESTION 146 Which two events occur during the time that the snapvault start command is creating a backup relationship between a primary and secondary storage system? (Choose two.) A. The secondary storage system requests an initial baseline transfer of the qtree or volume data from the primary volume. B. The primary storage system creates a Snapshot copy of the volume identified in the snapvault start command. C. The qtree data that has recently changed is transferred from the primary Snapshot copy to the baseline SnapVault secondary volume. D. The baseline SnapVault copy is processed on the primary by creating a new Snapshot copy and comparing it with the previous regularly scheduled Snapshot copy to determine which data blocks need to be replicated. Correct Answer: AB /Reference: QUESTION 147 Which three conditions will cause a takeover depending on the configuration of the high-availability "Pass Any Exam. Any Time." - www.actualtests.com 50 pair? (Choose three.) A. A takeover is initiated manually. B. One of the nodes is halted using the -f flag. C. There is a mismatch between the disks, array LUNs, or both that one node can see. D. One or more network interfaces that are configured to support failover become unavailable. Correct Answer: ACD /Reference: QUESTION 148 What are two factors that can impact your system's ability to reach the maximum number of simultaneous replication operations? (Choose two.) A. Your storage system resources, such as CPU usage, memory, disk bandwidth, or network bandwidth, have been taken from SnapMirror or SnapVault operations by heavy user operations. B. Your storage system has the nearstore option enabled and this option optimizes network operations for user access, relegating all replication operations to a lower priority. C. Your storage system is configured for high availability and is now in failover mode and cannot process more than the maximum number of simultaneous replication operations for that storage system. D. Your NetApp storage system platform is designed for SAN only and the hardware design does not support SnapVault or SnapMirror operations.

Correct Answer: AC /Reference: http://www.gratisexam.com/ QUESTION 149 Which three licenses are required for a Fabric MetroCluster system? (Choose three.) A. cluster B. cluster_remote C. syncmirror_local D. syncmirror_remote E. snapmirror_sync Correct Answer: ABC /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 51 QUESTION 150 Which storage solution is the default value in the NetApp Interoperability Matrix Tool (IMT) for this mandatory search criterion? A. SAN B. NAS C. protocols D. software Correct Answer: A /Reference: QUESTION 151 What is the NetApp Interoperability Matrix Tool (IMT)? A. IMT is an application installed on a third-party server that detects configurations that are not supportable in a NetApp solution. B. IMT is a searchable Web-based application that provides details about configurations for NetApp products

that work with third-party products that are qualified by NetApp. C. IMT is a performance analysis device that works on the Internet to provide performance metrics for NetApp products that work with third-party products. D. IMT is a set of spreadsheets and documentation that details the supportable configurations for NetApp products that work with third-party products and components qualified by NetApp. /Reference: QUESTION 152 In Data ONTAP 7.3.2 and newer, the maximum Volume SnapMirror window size limit for single- path connections is and multipath connections is. A. 3MB; 6MB B. 5MB; 10MB C. 1MB; 2MB "Pass Any Exam. Any Time." - www.actualtests.com 52 D. 7MB; 14MB Correct Answer: D /Reference: QUESTION 153 Which three can be used to establish a SnapVault relationship? (Choose three.) A. snapvault start -S filera:/vol/volume1 filerb:/vol/vol1/qtree1 B. snapvault start -S filera:/vol/volume/- filerb:/vol/vol1/qtree1 C. snapvault start -S filera:/vol/volume/* filerb:/vol/vol1/qtree1 D. snapvault start -S filera:/vol/volume/qtree1 filerb:/vol/vol1/qtree1 Correct Answer: ABD /Reference: QUESTION 154 You will be initiating a backup relationship between four primary volumes and one secondary destination. Which setting enables the 4:1 ratio between primary and secondary? A. the nearstore option B. the SnapProtect dpmaxfaninratio option C. the Protection Manager dpmaxfaninratio option

D. the Data ONTAP pmqsmbackuppreferred option Correct Answer: C /Reference: QUESTION 155 Where can you view the aggregates assigned to a resource pool? A. Utilization view B. Dependencies view C. Space Breakout view D. Resource Status view Correct Answer: C /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 53 QUESTION 156 A customer wants to seed a Volume SnapMirror relationship without sending the initial baseline over the WAN. Which tool should you recommend the customer use? A. SnapMirror to Tape B. LREP C. NDMP D. NFS Correct Answer: A /Reference: QUESTION 157 A customer has deduplicated data on a storage controller. Which NetApp Data Protection solution transfers the data in a deduplicated state without needing to expand the data for data transfer? A. NDMP B. SnapVault C. qtree SnapMirror D. volume SnapMirror Correct Answer: D /Reference:

QUESTION 158 You plan to mount the contents of a backup before performing a restore using the vsphere Client. Which two steps are mandatory in the process of mounting the contents of a backup? (Choose two.) A. click the Share button to create a shared resource B. supply the ESX Host IP address to mount the backup C. in the SnapManager for VI Restore window, click the Mount button D. navigate to NetApp System Manager and create a share for the secondary volume E. navigate to the SnapManager for VI Restore window and select the backup you want to mount Correct Answer: AD /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 54 QUESTION 159 What is a NetApp Snapshot copy? A. a physically independent point-in-time copy of a volume used to restore corrupted data B. a read-only image used to provide instant restores C. a point-in-time replica of a volume or an aggregate used for disaster recovery D. a point-in-time replica of production data used to provide concurrent data access for increased operational efficiencies /Reference: QUESTION 160 What are two requirements for creating a Protection Policy within Protection Manager? (Choose two.) A. dataset B. resource pool C. Deduplication Provisioning Policy D. retention time of Snapshot copies E. the backup/data transfer schedule Correct Answer: DE /Reference: QUESTION 161 Which command lists the status of the resource pool?

A. dfm resource status B. dfpm respool list C. aggregate resource status D. dataset pool list /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 55 QUESTION 162 Which NetApp replication technology offers the best RTO for an entire site failure? A. OSSV B. SnapVault C. SnapRestore D. Fabric MetroCluster Correct Answer: D /Reference: QUESTION 163 Which automatic storage policy protects the SnapProtect index database, which catalogs the Snapshot copies created by SnapProtect backup operations? A. SnapProtectDR B. DataFabricDR C. CommServeDR D. CommCellDR Correct Answer: C /Reference: QUESTION 164 Which two configurations does the NetApp Interoperability Matrix Tool (IMT) contain? (Choose two.) A. supported NetApp configurations B. unsupported NetApp configurations C. third-party certified NetApp configurations D. all technically possible NetApp configurations with notes about known issues Correct Answer: AC

/Reference: QUESTION 165 Which command should you use to configure a SnapVault transfer schedule? "Pass Any Exam. Any Time." - www.actualtests.com 56 A. snapvault snap sched vol1 sv_hourly 5@mon-sun@10 B. snapvault snap sched transfer vol1 sv_hourly 5@mon-sun@10 C. snapvault transfer sched vol1 sv_hourly 5@mon-sun@10 D. snapvault snap sched -x vol1 sv_hourly 5@mon-sun@10 Correct Answer: D /Reference: QUESTION 166 You are using SnapManager for Microsoft SQL Server to back up SQL databases. Which statement describes how SnapManager and Snapdrive work together? A. SnapManager manages Microsoft SQL databases so that SnapDrive is able to create consistent Snapshot copies. B. SnapManager manages the storage system so that SnapDrive is able to create consistent Snapshot copies. C. SnapDrive manages Microsoft SQL databases so that SnapManager is able to create consistent Snapshot copies. D. SnapDrive manages Microsoft SQL databases so that Data ONTAP is able to create consistent Snapshot copies. Correct Answer: A /Reference: QUESTION 167 What is the first step for calculating the total size requirement for a data center using the Unified Application sizer? A. install the NetApp Synergy Unified Application Sizer on each application server B. install the NetApp Synergy Unified Application Sizer on a centrally managed server C. install the appropriate NetApp Synergy application sizer on each application server D. Installation is not necessary; size each application server individually with the appropriate NetApp Synergyapplication sizer and save eachoutput file Correct Answer: D /Reference:

QUESTION 168 A customer has a source storage controller running Data ONTAP 8.0.2 and a destination storage "Pass Any Exam. Any Time." - www.actualtests.com 57 controller running Data ONTAP 7.3.6. Which two technologies could successfully establish a relationship from the source storage controller to the destination storage controller? (Choose two.) A. qtree SnapMirror B. synchronous SnapMirror C. SnapVault D. volume SnapMirror E. SnapMirror to Tape Correct Answer: AC /Reference: QUESTION 169 What are the three objectives of a backup and recovery customer assessment? (Choose three.) A. to reduce cost and improve performance through innovations made possible by NetApp technology B. to perform a thorough in-depth evaluation of existing IT infrastructure (i.e. backup and recovery) operational models C. to provide high-level recommendations for deploying NetApp technologies, solutions and techniques to increase operational effectiveness D. to install profitable NetApp backup and recovery solutions by the NetApp Professional Services organization to ensure best practices Correct Answer: ABC /Reference: QUESTION 170 You are the global backup administrator for your company and you have just returned from a three-week vacation. You need to find out if the storage administrator has requisitioned any new application servers that need protection. What is the most effective way to find out about unprotected data? A. log in to each storage system command line and check for new aggregates or volumes B. log in to the OnCommand protection user interface and check the dashboard C. call the storage administrator and ask about newly requisitioned application or file servers D. log in to each primary storage system using OnCommand System Manager and check for new LUNs E. rely on the OnCommand protection storage policies that you have designed to automatically protect all data in the data center globally "Pass Any Exam. Any Time." - www.actualtests.com 58

/Reference: QUESTION 171 What are two components of an Open Systems SnapVault (OSSV) installation? (Choose two.) A. secondary system B. OSSV agent installed on the primary system C. OSSV agent installed on the secondary system D. NetApp primary system Correct Answer: AB /Reference: QUESTION 172 You are using SnapProtect to manage a tape device connected to an FAS controller. How should the tape device be configured in the backup application? A. as a local tape device B. as an NDMP tape device C. as a remote-connected tape device D. as a SCSI-attached tape device /Reference: QUESTION 173 Which command should you use to configure a volume SnapMirror relationship? A. snapmirror start -S filer1:/vol/vol1 filer2:/vol/vol1 B. snapmirror baseline -S filer1:vol1 filer2:vol1 C. snapmirror initialize -S filer1:vol1 filer2:vol1 D. snapmirror start -S filer1:vol1 filer2:vol1 Correct Answer: C /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 59 QUESTION 174 Where can you view replication relationships not managed by Protection Manager in the NetApp Management Console?

A. Data > Volumes B. Data > Available Data C. Data > External Relationships D. Data > Snapmirror Correct Answer: C /Reference: QUESTION 175 Which two statements are true about using Protection Manager to restore data? (Choose two.) A. From Protection Manager, you navigate to the Policies tab, select the appropriate Protection Policy, click Edit, add the SnapVault License code, and click OK. B. Protection Manager only allows you to restore from a Snapshot copy stored in a SnapVault secondary. C. During the restore operation, you can select any Snapshot copy that was created by the Protection Policy to restore from. D. Protection Manager can only restore to a new location, not to the original location. E. Protection Manager allows the restore of a volume or a particular file. Correct Answer: CE /Reference: QUESTION 176 When vaulting from a mirror copy in SnapProtect, what is the required setting for the option snapvault.snapshot_for_dr_backup? A. vsm_base_only B. vsm_base_preferred C. named_snapshot_only D. named_snapshot_preferred Correct Answer: C /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 60 QUESTION 177 By default in a MetroCluster, what automatically happens when a forced takeover occurs? (Choose three.) A. LUNs come online. B. LUNs preserve serial numbers. C. Volumes receive a new file system ID (FSID).

D. SyncMirrored Aggregate Relationships are broken E. Existing NFS mounts to the failed controller become stale. Correct Answer: CDE /Reference: QUESTION 178 What are two reasons why SnapManager for Exchange interacts with SnapDrive? (Choose two.) A. to facilitate SnapMirror replication updates B. to facilitate Exchange transaction log shipping C. to perform aggregate snapshots D. to communicate with the storage controller E. to adjust volume FlashCache caching priority Correct Answer: AD /Reference: QUESTION 179 On a SAN-attached application server, which two tools are required to create a consistent Snapshot copy from the application server? (Choose two.) A. NetApp SnapDrive B. NetApp System Manager C. NetApp Protection Manager D. NetApp SnapManager software for the appropriate application server Correct Answer: AD /Reference: QUESTION 180 "Pass Any Exam. Any Time." - www.actualtests.com 61 You have installed SnapProtect and DataFabric Manager software on two different Windows 2008 R2 servers, which are NOT configured with Windows failover cluster services. The DataFabric Manager host fails. Which three parts of your SnapProtect solution are no longer working? (Choose three.) A. disk-to-tape backup B. disk-to-disk backup C. restore of mirrored data using the SnapProtect UI D. local Snapshot copies using the SnapProtect UI E. restore of data using the storage command line CD

/Reference: QUESTION 181 In which form does NetApp System Manager display aggregate capacity information? A. textual only B. graphical only C. graphical and textual D. NetApp System Manager does NOT display aggregate capacity information. Correct Answer: C /Reference: QUESTION 182 Which statement is true about SnapVault technology? A. SnapVault technology manages native backup and recovery operations for Windows and UNIX application servers. B. SnapVault technology is used to recover from a corrupted database, failed application server, or damaged file system in less than a minute,regardless of the size of the volume being restored. C. SnapVault replicates Snapshot copies from primary to secondary storage on a scheduled basis and can be combined with deduplication to improve storage efficiency on the secondary. D. SnapVault is a virtualized and tightly integrated backup application that interoperates with Microsoft NTFS, providing a layer of abstraction between application data and its physical storage. "Pass Any Exam. Any Time." - www.actualtests.com 62 Correct Answer: C /Reference: QUESTION 183 How does NetApp System Manager display storage capacity and space utilization information? A. logically by volume B. physically by disk C. physically by RAID group D. logically by volume and physically by aggregates Correct Answer: D /Reference:

QUESTION 184 Which two configurations does SnapMirror over multiple paths support? (Choose two.) A. Multiplex B. Takeover C. Failover D. Cluster Correct Answer: AC /Reference: QUESTION 185 What is the function of the aggr copy command? A. copies blocks of data from one aggregate to another regardless of disk drive type B. copies blocks of data between aggregates of the same disk drive type C. copies the root inode of an aggregate to provide a read-only image of the data contained on the aggregate D. copies all of the volumes in an aggregate, while using only a minimal amount of additional disk space Correct Answer: A /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 63 QUESTION 186 You are using SnapManager for Virtual Infrastructure to complete an unscheduled manual backup. You want to exclude some temporary databases and verify the success of the backup. Which five steps must you include during the manual backup? (Choose five.) A. add a new backup job B. select the datastore or virtual machine to back up C. de-select the datastore on which the virtual machine's temporary files are saved D. on the Exclude window, select the database file(s) that you want to exclude E. configure email addresses and the error notification settings F. go to the Restore window and select the datastore from the Datastores option Correct Answer: /Reference: Answer: A,B,C,E,F QUESTION 187 The Secondary Space Management wizard can be used in Protection Manager to plan and resolve space management issues within members of a resource pool. Which three options are available in the Secondary

Space Management wizard? (Choose three.) A. volume resizing B. OSSV host migration C. dataset load balancing D. secondary volume migration E. backup and Snapshot copy deletion Correct Answer: ADE /Reference: QUESTION 188 In a SnapVault and Open Systems SnapVault implementation, what can negatively impact performance? A. the dataset being database-related data B. the dataset in the relationship having a large number of small files C. the dataset in the relationship having a small number of large files D. the secondary storage system containing more directories than the primary storage system /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 64 QUESTION 189 When you create a Provisioning Policy, which two are required? (Choose two.) A. name of the policy B. level of storage availability required C. provisioning script D. resource label E. Storage type: NAS or SAN Correct Answer: AE /Reference: QUESTION 190 Which three data protection solutions use Snapshot technology as the underlying foundation? (Choose three.) A. SnapVault B. SnapMirror C. Flash Cache D. NDMP backup

E. SnapClone Correct Answer: ABD /Reference: QUESTION 191 Which three steps must you perform prior to a non-disruptively upgrade the version of Data ONTAP? (Choose three.) A. halt any deduplication operations B. update disk and disk shelf firmware C. notify users of the estimated downtime D. remove or replace all failed disk drives Correct Answer: ABD /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 65 QUESTION 192 Which tool should you use to perform the basic configuration of the Open Systems SnapVault client agent on a Windows 2008 system? A. OSSVconfig.exe B. svsetup.bat C. ossvadmin.exe D. svconfigurator.exe Correct Answer: D /Reference: QUESTION 193 Which two High Availability solutions have the following characteristics? (Choose two.)? FC-VI adapter is required for cluster interconnect.? Failure is possible after loss of entire node (including storage). A. Stretch MetroCluster B. Mirrored HA pair C. Standard HA pair D. Fabric-attached MetroCluster E. Standalone controller with SyncMirror Correct Answer: AD

/Reference: QUESTION 194 At a minimum, which three components are required to be included for the SnapProtect management solution? A. SnapProtect CommServe, OnCommand Unified Manager (DFM), and SnapDrive B. SnapProtect CommServe, OnCommand Unified Manager (DFM), and a NetApp storage system C. SnapProtect CommServe, OnCommand Unified Manager (DFM), and VGA D. SnapProtect CommServe, OnCommand Unified Manager (DFM), and Tape media /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 66 QUESTION 195 Which three can a Protection Manager dataset contain? (Choose three.) A. files B. qtrees C. volumes D. directories E. Snapshot copies CD /Reference: QUESTION 196 Which three pieces of information about a customer site do you need to build a backup and recovery plan? (Choose three.) A. data encoding method B. RPO C. RTO D. amount of data CD /Reference: QUESTION 197 Which two CLI commands should you use to create a volume Snapshot copy either manually or automatically?

(Choose two.) A. vol snap create B. snap create C. snap start D. snap sched E. snap create -A D /Reference: "Pass Any Exam. Any Time." - www.actualtests.com 67 QUESTION 198 Which interface tool should you use to monitor space capacity? A. Space Manager B. NetApp Management Console C. Performance Advisor D. Capacity Manager /Reference: QUESTION 199 Which NetApp software supplies work with the Microsoft Volume Shadow Copy Service? A. SnapDrive for Windows software B. SnapDrive for Unix software C. SnapManager software D. SnapManager for Microsoft Volume Shadow Copy Service software Correct Answer: A /Reference: QUESTION 200 Open Systems SnapVault can back up primary data, which resides where? (Choose two.) A. a NAS connected mount point B. on internal disks C. on network shares D. on SAN disks, both FCP and Iscsi

D /Reference: Answer: QUESTION 201 "Pass Any Exam. Any Time." - www.actualtests.com 68 Which command should you use to configure a SnapVault relationship? A. snapvault initialize -S filer1:vol1 filer2:vol1 B. snapvault initialize -S filer1:/vol/vol1/qtree filer2:/vol/vol1/qtree C. snapvault start -S filer1:/vol/vol1/qtree filer2:/vol/vol1/qtree D. snapvault start -S filer1:vol1 filer2:vol1 Correct Answer: C /Reference: QUESTION 202 Click the Exhibit button.

Your company has implemented a NetApp V-Series controller in front of at third-party disk array. This V-Series controller is to function as a SnapVault secondary. Regulations require that the data be backed up to a mirrored aggregate. Which two Provisioning Policy settings are required? (Choose two.) A. Storage Subsystem Failure B. Disk failure protection - RAID-DP C. Storage Controller Failure "Pass Any Exam. Any Time." - www.actualtests.com 69 D. Storage High Availability E. Disk failure protection - Externally managed RAID Correct Answer: AE /Reference: QUESTION 203 Which statement is true about a NetApp high-availability pair? A. Two storage controllers are directly connected to each other through interconnect adapters and to each other's disk shelves. B. Up to twenty-four controllers are connected to each other, either directly or through switches and FC-VI interconnect adapters.