SINGLE OR DOUBLE ACTING CYLINDERS, to mm CONFORMING WITH ISO 43 - CETOP - AFNOR STANDARDS ISOCLAIR - SERIES 435 - TYPES : C-AS, CC-AS P-GB-R5
ISOCLAIR AIR CYLINDERS to mm OPERATIONAL DIAGRAMS ( to mm) AIR CYLINDER NOT DESIGNED TO RECEIVE MAGNETIC DETECTOR AIR CYLINDER DESIGNED TO RECEIVE MAGNETIC DETECTORS (reed switch or magneto-resistive) (M) Air cylinders equipped of a magnet (M) designed to operate in combination with the magnetic position detectors (DM). These air cylinders can be equipped with one or more magnetic position detectors (without contact) attached to the tube by a clamp. They allow limit positions to be detected, as well as the intermediate piston positions. DEFINING THE DIAMETER OF AN AIR CYLINDER - See forces defined on page P0-5 DEFINING THE PART NUMBER OF A to mm ISOCLAIR AIR CYLINDER C.. AS... SER DM ISOCLAIR air cylinder Air cylinder diameter Type ISOCLAIR to mm Length of stroke For a single acting air cylinder: suffix SER = rod retracted when at rest, or SES = rod extented when at rest For a double acting air cylinder: no suffix Air cylinder designed to receive magnetic position detectors: add suffix DM Note : Mountings and detectors should be ed separately. ORDERING When ing, please specify: 435..... +...... The air cylinder standard code or part number The code or part number of any option(s) The code or codes and quantity of any mountings : 439..... The code and quantity of any magnetic detectors : 1..... The code and quantity of detector mountings : 1..... P-
Type : C-AS C-AS/DM CHOICE OF EQUIPMENT Stroke STANDARD SINGLE ACTING CYLINDER - mm SINGLE ACTING CYLINDERS equipped or non-equipped for magnetic detectors Conforming with ISO-CETOP-AFNOR standards With elastic cushioning ISOCLAIR SPECIFICATIONS FLUID : air or neutral gas, filtered, lubricated or not PRESSURE : to bar TEMPERATURE : 0 C, + 70 C (-) - - C, + 70 C ( to ) STANDARDS : ISO 43-1 - 139 CETOP RP 5 P - RP P - RP 3 P AFNOR NF E 49-030 Minimum pressure to compress the spring : bar (SER and SES) The return of the piston rod must be without load The dimensions of the single acting returned rod version (SER type) are identical to those of the double acting version The length of the SES version is twice the nominal stroke. CONSTRUCTION CODES to specify References to specify ROD RETURNED at rest ROD OUT at rest 435 00 4 435 00 5 C AS - SER C AS - SER 435 00 435 00 7 C AS - SER C AS - SER 435 00 03 435 00 04 C AS - SER C AS - SER 435 00 1 435 00 19 C AS - SES C AS - SES 435 00 05 435 00 0 C AS - SER C AS - SER 435 00 435 00 1 C AS - SES C AS - SES 435 00 07 435 00 0 C AS - SER C AS - SER 435 00 435 00 3 C AS - SES C AS - SES 435 00 09 435 00 090 C AS - SER C AS - SER 435 00 4 435 00 C AS - SES C AS - SES SINGLE ACTING CYLINDER EQUIPPED FOR MAGNETIC DETECTORS NS ROD RETURNED at rest Cylinder Cylinder non-equipped for magnetic detectors 435 00 435 00 9 C AS - SER/DM C AS - SER/DM 435 00 0 435 00 1 C AS - SER/DM C AS - SER/DM 435 00 435 00 3 C AS - SER/DM C AS - SER/DM 435 00 4 435 00 5 C AS - SER/DM C AS - SER/DM 435 00 435 00 7 C AS - SER/DM C AS - SER/DM 435 00 435 00 9 C AS - SER/DM C AS - SER/DM Front or rear flange MF High foot (per unit) MS3 Rear trunnion CODES to specify The magnetic position detectors must be ed separately: UNI model, reed switch or magneto-resistive type (see P95) MOUNTINGS (Dimensions, see next pages) CODES to specify Female rod clevis ISO 1 - RP P AP References to specify Spherical bearing rod end ISO 139 - RP3 P AP 439 00 19 439 00 191 439 00 190 439 00 193 439 00 194 439 00 19 439 00 179 439 00 13 439 00 11 439 00 159 439 00 1 439 00 1 439 00 1 439 00 17 439 00 10 439 00 14 439 00 1 439 00 151 434 00 0 434 00 001 Note: Mountings are identical to those of the double acting version shown next pages Each cylinder is delivered with a neck nut Cylinder equipped for magnetic detectors Barrel : stainless steel : non-magnetic stainless steel Rod : stainless steel : stainless steel good resistance Front and rear covers : anodized light alloy : anodized light alloy to corrosive elements Piston : acetal resin (POM) : acetal resin (POM) and light alloy and light alloy equipped with permanent magnet Piston seals : polyurethane (PUR) : polyurethane (PUR) Neck nut : galvanized steel : galvanized steel Rod nut : galvanized steel : galvanized steel Dismounting : cannot be dismounted : cannot be dismounted Cushioning : elastic : elastic SER SES M 5 M 5 M 5 M 5 M 5 M 5 M 5 M 5 Nek nut MR3 P-3
Type : C-AS DOUBLE ACTING CYLINDERS - mm Conforming with ISO-CETOP-AFNOR standards With elastic cushioning ISOCLAIR SPECIFICATIONS FLUID : air or neutral gas, filtered, lubricated or not PRESSURE : bar max. TEMPERATURE : 0 C, + 70 C (-) - - C, + 70 C ( to ) STANDARDS : ISO 43-1 - 139 CETOP RP 5 P - RP P - RP 3 P AFNOR NF E 49-030 CONSTRUCTION Barrel Rod Front and rear covers Piston Piston seals Neck nut Rod nut Dismounting Cushioning : stainless stell good resistance : stainless stell to external forces : anodized light alloy : acetal resin (POM) and light alloy : polyurethane (PUR) : galvanized steel : galvanized steel : cannot be dismounted : elastic CHOICE OF EQUIPMENT CODES 435 00 71 C AS 435 00 7 C AS 0 435 00 73 C AS 0 M 5 0 435 00 74 C AS 0 435 00 77 C AS 435 00 7 C AS 0 435 00 79 C AS 0 M 5 0 435 00 0 C AS 0 435 00 0 C AS 435 00 07 C AS M 5 0 435 00 3 C AS 0 0 435 00 09 C AS 0 CODES 435 00 070 C AS 435 00 071 C AS 0 435 00 5 C AS 0 M 5 0 435 00 073 C AS 0 435 00 074 C AS 435 00 075 C AS 0 435 00 7 C AS 0 0 435 00 077 C AS 0 435 00 07 C AS 435 00 079 C AS 0 435 00 9 C AS 0 0 435 00 01 C AS 0 0 435 00 90 C AS 0 MOUNTINGS CODES to specify Cylinder Front or rear flange MF High foot (per unit) MS3 Rear trunnion Female rod clevis ISO 1 - RP P AP Spherical bearing rod end ISO 139 - RP3 P AP Nek nut MR3 439 00 19 439 00 191 439 00 190 439 00 193 439 00 194 439 00 19 439 00 179 439 00 13 439 00 11 439 00 159 439 00 1 439 00 1 439 00 10 439 00 14 439 00 1 439 00 1 439 00 17 434 00 0 434 00 001 439 00 151 Each cylinder is delivered with a neck nut. OPTIONS Other strokes on request Double crossbar for -- mm (max. stroke 300 mm) Barrel in stainless steel for -- mm : specify the codes of cylinders equipped for magnetic detectors (see opposite). Anti-corrosive version, stainless steel type CIX (see P) P-4
Type : C-AS/DM CONSTRUCTION Barrel Rod Front and rear covers Piston Piston seals Neck nut Rod nut Dismounting Cushioning DOUBLE ACTING CYLINDERS - mm equipped for magnetic position detectors Conforming with ISO-CETOP-AFNOR standards With elastic cushioning ISOCLAIR/DM SPECIFICATIONS FLUID : air or neutral gas, filtered, lubricated or not PRESSURE : bar max. TEMPERATURE : 0 C, + 70 C (-) - - C, + 70 C ( to ) STANDARDS : ISO 43-1 - 139 CETOP RP 5 P - RP P - RP 3 P AFNOR NF E 49-030 CHOICE OF EQUIPMENT : non magnetic stainless steel good resistance : stainless steel to corrosive elements : anodized light alloy : acetal resin (POM) and light alloy : polyurethane (PUR) : galvanized steel : galvanized steel : cannot be dismounted : elastic NS CODES 435 00 91 C AS -DM 435 00 9 C AS -DM 0 435 00 93 C AS 0-DM M 5 0 435 00 94 C AS0-DM 435 00 9 C AS -DM 435 00 97 C AS -DM 0 435 00 9 C AS 0-DM M 5 0 435 00 99 C AS0-DM CODES 435 00 305 C AS -DM 435 00 30 C AS -DM 0 435 00 307 C AS 0-DM M 5 0 435 00 30 C AS 0-DM 435 00 309 C AS -DM 435 00 3 C AS -DM 0 435 00 311 C AS 0-DM 0 435 00 3 C AS 0-DM 435 00 313 C AS -DM 435 00 301 C AS -DM 435 00 314 C AS -DM 435 00 30 C AS -DM M 5 0 435 00 315 C AS 0-DM 0 435 00 303 C AS 0-DM 0 435 00 3 C AS 0-DM 0 435 00 304 C AS0-DM 0 435 00 317 C AS 0-DM The magnetic position detectors are ed separately: UNI model, reed switch or magneto-resistive type (see P95) MOUNTINGS CODES to specify Cylinder Front or rear flange MF High foot (per unit) MS3 Rear trunnion Female rod clevis ISO 1 - RP P AP Spherical bearing rod end ISO 139 - RP3 P AP 439 00 19 439 00 191 439 00 190 439 00 193 439 00 194 439 00 19 439 00 179 439 00 13 439 00 11 439 00 159 439 00 1 439 00 1 439 00 1 439 00 17 439 00 10 439 00 14 439 00 1 439 00 151 434 00 0 434 00 001 Each cylinder is delivered with a neck nut. OPTIONS Other strokes on request Double crossbar -- mm (max. stroke 300 mm) Nek nut MR3 P-5
Type : C-A C-A/DM CHOICE OF EQUIPMENT DOUBLE ACTING CYLINDERS - mm equipped or non-equipped for magnetic detectors Conforming with ISO-CETOP-AFNOR standards With adjustable pneumatic cushioning ISOCLAIR SPECIFICATIONS FLUID : air or neutral gas, filtered, lubricated or not PRESSURE : bar max. TEMPERATURE : 0 C, + 70 C (-) - - C, + 70 C ( to ) STANDARDS : ISO 43-1 - 139 CETOP RP 5 P - RP P - RP 3 P AFNOR NF E 49-030 CONSTRUCTION Cylinder non equipped Cylinder equipped for magnetic detectors for magnetic detectors Barrel : stainless steel : non-magnetic stainless steel Rod : stainless steel : stainless steel Front or rear covers : anodized light alloy : anodized light alloy Piston : acetal resin (POM) : acetal resin (POM) and light alloy and light alloy equipped with permanent magnet Piston seals : polyurethane (PUR) : polyurethane (PUR) Neck nut : galvanized steel : galvanized steel Rod nut : galvanized steel : galvanized steel Dismounting : cannot be dismounted : cannot be dismounted Cushioning : pneumatic, adjustable : pneumatic, adjustable from both sides from both sides CYLINDER NON EQUIPPED FOR DETECTORS CODES to specify to specify CODES to specify 435 00 419 C A 435 00 43 C A -DM 0, 435 00 4 C A 435 00 44 C A -DM 0,0 0 435 00 41 C A 0 435 00 4 C A 0-DM 0,300 0 435 00 4 C A 0 435 00 4 C A 0-DM 0,330 435 00 47 C A 435 00 43 C A -DM 0,0 435 00 4 C A 435 00 433 C A -DM 0,300 0 435 00 49 C A 0 435 00 434 C A 0-DM 0,30 0 0 435 00 431 435 00 430 C A 0 C A 0 435 00 43 435 00 435 C A 0-DM C A 0-DM 0,5 0,0 Magnetic position detectors are ed separately: UNI model, reed switch or magneto-resistive type (see P95) NS CYLINDER EQUIPPED FOR DETECTORS (-DM) to specify Cushioning length: mm = mm mm = mm Weights (kg) MOUNTINGS CODES to specify Cylinder Front or rear flange MF 439 00 10 Each cylinder is delivered with a neck nut. OPTION Other strokes on request High foot (per unit) MS3 439 00 14 Rear trunnion 439 00 1 Female rod clevis ISO 1 - RP P AP 439 00 1 434 00 0 DIMENSIONS Cylinders with pneumatic and elastic cushioning have the same dimensions, see following pages. Spherical bearing rod end ISO 139 - RP3 P AP 439 00 17 434 00 001 Nek nut MR3 439 00 151 P-
DIMENSIONS AND WEIGHTS BARE CYLINDER (delivered with neck nut) T + 1 AM ZB + 1 D EE BE S Y WH BF XC + 1 PJ + 1 F + 1 EE BC SINGLE ROD CYLINDER EW B BE MM CD BE BC KK Z 3 BC EW L L EW ZM + AM WH F1 + 1 WH + 1 AM PK + 1 1 : + stroke : + x stroke 3 : across flats DOUBLE ROD CYLINDER DIMENSIONS AM B BC BE BF CD D EE EW F F1 KK L MM PJ PK S T WH M x 1, 4 H 9 1 M 5 d 13 4 M4 x 0,7 4 31 M x 1, 4 H 9 1 M 5 d 13 4 M4 x 0,7 4 31 14 M x 1,5 14 H 11 M 5 d 11 4,7 4,7 M x 1 9 34,5 34,5 3 0,3 14 M x 1,5 14 H 11 1 M 5 d 11 55,7 5,7 M x 1 9 41,5 3,5 3 7,3 9 17,5 M x 1,5 17,5 H 11 9 d 11 4, 4, M x 1, 47,3 47,3 4 1,3 4 9 17,5 M x 1,5 17,5 H 11 30 d 11 9,5 9,5 M x 1, 5,5 5,5 5 13, DIMENSIONS Weights (Kg) XC Y Z ZB ZM (4) (5) 4 3,5 7 74 0,030 0,0 4 3,5 7 74 0,030 0,0 75 9 4,5 93,4 0,070 0,090 1,5 9 91,5 97,4 0,0 0,0 95 3,5 13 3,5 113 0,170 0,0 4 3,5 17 115,5 0,0 0,0 (4) Cylinder weight with 0 mm stroke. (5) Weight to be added per additional 0 mm length. NOTE : Single and double acting cylinders to mm have the same dimensions. The length of the SES version is twice the nominal stroke. The mountings are always delivered separately. P-7
DIMENSIONS FRONT OR REAR MOUNTING FLANGE - MF AM ZF + 1 FB MF MF UF TF Y UR W HIGH FOOT MOUNTING - MS3 Foot mountings are supplied in single units, not in pairs. UF1 NH/AH MF TR US AB AU XS SA' + 1 SA + 1 AM XA + 1 AO LA + 1 1 : + stroke DIMENSIONS AM AO AU AB NH FB XA LA MF AH SA SA' TF TR UR UF UF1 US W XS Y ZF 5 11 4,5 7 7 3 30 30 35 13 4 5 5 11 4,5 7 7 3 30 30 35 13 4 5 14 5,5 4 90 4 7 3 30 5 3 4 1 3 74 14 5,5 90,5 9,5 4,5 34,5 3 30 5 3 4 1 3 0,5 9 17, 4,5 113,5 5 97,5 39,5 4 45 54 19 3 31 9,5 9 17, 113,5,5 5,5 44,5 4 45 54 3 31 1,5 WEIGHTS (kg) Front or rear flange Foot WEIGHTS (kg) Front or rear flange Foot 0,0 0,030 0,0 0,030 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 P-
DIMENSIONS REAR TRUNNION MOUNTING AM FA + 1 UA ω X BH GC GL α UB FB GA EA + 1 GG 1 : + stroke DIMENSIONS AM BH EA FA FB GA GC GG GL UA UB X α ω 4,7 79 4,5,5,5 9 1 13 11, 7 0 4,7 79 4,5,5,5 9 1 13 11, 7 0 7 7,5 93 5,5 3 34 1 13,5 10 7 79 99,5 5,5 3 34 1 13,5 47 10 30 91 117, 3 4 3 4 30 0, 3 4 3 4 WEIGHTS (Kg) Rear trunnion WEIGHTS (Kg) Rear trunnion 0,0 0,0 0,0 0,0 0,00 0,00 P-9
DIMENSIONS FEMALE ROD CLEVIS - AP ISO 1 - RP P CK H9/d E max. AV CM K max. LE CE KK CL SPHERICAL BEARING ROD END - AP ISO 139 - RP 3 P EN h α α ;;;; ;;;;;;; ;;;;;; KK CN H9 AX CE1 LE1 B NECK NUT - MR3 BE WEIGHTS (Kg) Female clevis Male clevis Nut 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,030 0,0 KV DIMENSIONS AV-AX B BE CE CE1 CK CL CM CN E EN K KK KV KW LE LE1 α 3 M x 1, 7 4 + 0,4 4 + 0,1 5,5 11 M4 x 0,7 19 4 3 M x 1, 7 4 + 0,4 4 + 0,1 5,5 11 M4 x 0,7 19 4 M x 1,5 4 30 + 0,4 + 0,1 33,5 9,5 M x 1 19 4 11 4 M x 1,5 4 30 + 0,4 + 0,1 33,5 9,5 M x 1 19 4 11 4 4 M x 1,5 3 3 + 0,5 + 0,15 45 M x 1, 7 5 13 4 57 M x 1,5 43 + 0,5 + 0,15 5 14 M x 1, 7 5 15 4 KW WEIGHTS (Kg) Female clevis Male clevis Nut 0,0 0,030 0,0 0,0 0,0 0,0 0,0 0,070 0,0 ASCO/JOUCOMATIC reserves the right to alter the availability, design and specifications without notice. P-
Type: CC-AS GENERAL SPECIFICATIONS FLUID DIAMETER Cylinder single acting Cylinder double acting STANDARD STROKE Cylinder single acting Cylinder double acting PRESSURE Cylinder single acting Cylinder double acting PNEUMATIC CYLINDERS SINGLE AND DOUBLE ACTING to mm conforming with ISO 43-CETOP-AFNOR NF E 49-030 standards Equipped or non-equipped for magnetic detectors ISOCLAIR COMPACT : air or neutral gas, filtered, lubricated or not : to mm : to mm : - mm : to 0 mm (above : on request) : to bar : bar TEMPERATURE : - C ; + 70 C STANDARDS ISO : 43-139-1 CETOP : RP 5 P - RP P RP 3 P AFNOR : NF E 49-030-NF E 49-035 NF E 49-03 CONNECTION - mm : M5 - mm : DEFINING THE PART NUMBER OF A to mm ISOCLAIR COMPACT AIR CYLINDER CC.. AS... SER DM Type ISOCLAIR COMPACT of cylinder () Standard items can be used on lubricated or non lubricated air Stroke () In case of single acting cylinders, ref. SER : rod returned at rest or SES : rod out at rest In case of double acting cylinders : no symbol. Cylinder equipped to receive magnetic position detector NB.: Magnetic position detectors have to be ed separately: UNI model, reed switch or magneto-resistive type (see P95) ORDERING On your please specify : 435..... Air - 7 bar - C 439..... Code of cylinder equipped to receive detector Nature, pressure and temperature of fluid Reference number and description of mountings The code and quantity of any magnetic detectors : 1..... The code and quantity of detector mountings : 1..... P-11
Type: CC-AS CC-AS/DM to mm SINGLE ACTING CYLINDERS equipped or non-equipped for magnetic detectors Conforming with ISO - CETOP - AFNOR standards With elastic cushioning ISOCLAIR COMPACT SPECIFICATIONS FLUID : air or neutral gas, filtered, lubricated or not PRESSURE : to bar TEMPERATURE : - C ; + 70 C STANDARDS : ISO 43-139 - 1 CETOP RP 5 P - RP P - RP 3 P AFNOR NF E 49-030 - NF E 49-035 - NF E 49-03 Minimum pressure to compress the spring : bar (SER and SES) The return of the piston rod must be without load The dimensions of the single acting returned rod version (SER type) are identical to those of the double acting version. The length of the SES version is twice the nominal stroke. SER SES CONSTRUCTION Cylinder non equipped for magnetic detectors Cylinder equipped for magnetic detectors Barrel :stainless steel :non-magnetic stainless steel good resistance Rod :stainless steel :stainless steel to corrosive Front and rear covers :anodized light alloy :anodized light alloy elements Piston :acetal resin (POM) :acetal resin (POM) and light alloy and light alloy équipped with permanent magnet Piston seals :polyurethane (PUR) :polyurethane (PUR) Neck nut :galvanized steel :galvanized steel Rod nut :galvanized steel :galvanized steel Dismounting :cannot be dismounted :cannot be dismounted Cushioning :elastic :elastic CHOICE OF EQUIPMENT Stroke STANDARD SINGLE ACTING CYLINDER CODES to specify 435 00 341 435 00 34 435 00 343 435 00 344 435 00 345 435 00 34 435 00 347 435 00 34 References to specify ROD RETURNED at rest CC AS - SER CC AS - SER CC AS - SER CC AS - SER CC AS - SER CC AS - SER CC AS - SER CC AS - SER CODES to specify 435 00 349 435 00 3 435 00 351 435 00 35 435 00 353 435 00 354 435 00 355 435 00 35 SINGLE ACTING CYLINDER EQUIPPED FOR MAGNETIC DETECTORS * ROD RETURNED NS at rest 435 00 31 CC AS - SER/DM 435 00 3 CC AS - SER/DM - 435 00 33 CC AS - SER/DM 435 00 34 CC AS - SER/DM - 435 00 35 CC AS - SER/DM 435 00 3 CC AS - SER/DM - 435 00 37 CC AS - SER/DM 435 00 3 CC AS - SER/DM - * The magnetic position detectors must be ed separately: UNI model, reed switch or magneto-resistive type (see P95) References to specify ROD OUT at rest CC AS - SES CC AS - SES CC AS - SES CC AS - SES CC AS - SES CC AS - SES CC AS - SES CC AS - SES - - - - M5 M5 M5 M5 MOUNTINGS (Dimensions, see next pages) Cylinder Front flange MF 439 00 179 439 00 10 High Foot (per unit) MS3 439 00 13 439 00 14 CODES to specify Rod end clevis ISO 1 - RP P AP 439 00 159 439 00 1 434 00 0 Note: Mountings are identical to those of the double acting version shown opposite Each cylinder is delivered with a neck nut Spherical bearing rod end ISO 139 - RP 3 P AP Neck nut MR3 439 00 1 439 00 1 439 00 17 434 00 001 439 00 151 OPTION : Other strokes on request P-
Type: CC-AS DOUBLE ACTING CYLINDERS - mm Conforming with ISO - CETOP - AFNOR standards With elastic cushioning ISOCLAIR COMPACT SPECIFICATIONS FLUID : air or neutral gas, filtered, lubricated or not PRESSURE : bar max. TEMPERATURE : - C ; + 70 C STANDARDS : ISO 43-139 - 1 CETOP RP 5 P - RP P - RP 3 P AFNOR NF E 49-030 - NF E 49-035 - NF E 49-03 CONSTRUCTION Barrel : stainless steel good resistance Rod : stainless steel to corrosive elements Front and rear covers : anodized light alloy Piston : acetal resin (POM) and light alloy Piston seals : polyurethane (PUR) Neck nut : galvanized steel Rod nut : galvanized steel Dismounting : cannot be dismounted Cushioning : elastic CHOICE OF EQUIPMENT CODES to specify to specify 435 00 377 CC AS 435 00 37 CC AS M5 0 435 00 379 CC AS 0 0 435 00 30 CC AS 0 0 0 435 00 31 435 00 3 435 00 33 435 00 34 CC AS CC AS CC AS 0 CC AS 0 M5 0 0 0 0 0 CODES to specify 435 00 35 435 00 3 435 00 37 435 00 3 435 00 39 435 00 390 435 00 391 435 00 39 435 00 393 to specify CC AS CC AS CC AS 0 CC AS 0 CC AS CC AS CC AS 0 CC AS 0 CC AS 0 MOUNTINGS CODES to specify Cylinder Front flange MF 439 00 179 439 00 10 High Foot (per unit) MS3 439 00 13 439 00 14 Rod end clevis ISO 1 - RP P AP 439 00 159 439 00 1 434 00 0 Spherical bearing rod end ISO 139 - RP 3 P AP 439 00 1 439 00 17 434 00 001 Neck nut MR3 439 00 1 439 00 151 Each cylinder is delivered with a neck nut. OPTION Other strokes on request P-13
Type: CC-AS/DM DOUBLE ACTING CYLINDERS to mm equipped for magnetic position detectors Conforming with ISO - CETOP - AFNOR standards With elastic cushioning ISOCLAIR COMPACT/DM SPECIFICATIONS FLUID : air or neutral gas, filtered, lubricated or not PRESSURE : bar max. TEMPERATURE : - C ; + 70 C STANDARDS : ISO 43-139 - 1 CETOP RP 5 P - RP P - RP 3 P AFNOR NF E 49-030 - NF E 49-035 - NF E 49-03 CONSTRUCTION Barrel : non magnetic stainless steel good resistance Rod : stainless steel to corrosive elements Front and rear covers : anodized light alloy Piston : acetal resin (POM) and light alloy Piston seals : polyurethane (PUR) Neck nut : galvanized steel Rod nut : galvanized steel Dismounting : cannot be dismounted Cushioning : elastic CHOICE OF EQUIPMENT CODES * 435 00 CC AS - DM 435 00 3 CC AS - DM M5 0 435 00 4 CC AS 0 - DM 0 435 00 5 CC AS 0 - DM 0 0 435 00 435 00 7 435 00 435 00 9 CC AS - DM CC AS - DM CC AS 0 - DM CC AS 0 - DM 0 0 0 0 0 CODES * 435 00 4 435 00 411 435 00 4 435 00 413 435 00 414 435 00 415 435 00 4 435 00 417 435 00 41 * The magnetic position detectors are ed separately: UNI model, reed switch or magneto-resistive type (see P95) M5 CC AS - DM CC AS - DM CC AS 0 - DM CC AS 0 - DM CC AS - DM CC AS - DM CC AS 0 - DM CC AS 0 - DM CC AS 0 - DM NS MOUNTINGS CODES to specify Cylinder Front flange MF High Foot (per unit) MS3 Rod end clevis ISO 1 - RP P AP Spherical bearing rod end ISO 139 - RP 3 P AP Neck nut MR3 439 00 179 439 00 10 439 00 13 439 00 14 439 00 159 439 00 1 434 00 0 439 00 1 439 00 17 434 00 001 439 00 1 439 00 151 Each cylinder is delivered with a neck nut. OPTION Other strokes on request P-14
DIMENSIONS AND WEIGHTS BARE CYLINDER (delivered with front neck nut). Series 435 EE AM S Y WH BF EE ZB + 1 F + 1 B EE D BE B KV MM KK Z DIMENSIONS AM B BE BF D EE F KK MM S KV WH 14 Mx1,5 14 M5 4, Mx1 3 19 Mx1,5 14 1 M5 55, Mx1 3 19 4 Mx1,5 17,5 9 G1/ 4,5 Mx1, 4 7 4 9 Mx1,5 17,5 30 G1/ 9, Mx1, 5 7 DIMENSIONS WEIGHTS (Kg) 3 Y Z ZB 3 4 4 1 Stroke across flats Cylinder weight with 0 mm stroke. Weight to be added per additional 0 mm length. 9 9 3,5 3,5 13 17 70,7 77,7,3 97,5 0,0 0,070 0,1 0,1 0,090 0,0 0,0 0,0 NOTE : - Single and double acting cylinders to mm have the same dimensions. - The length of the SES version is twice the nominal stroke. - The mountings are always delivered separately. P-15
- DIMENSIONS FRONT MOUNTING FLANGE - MF AM ZF + 1 MF UF = TF FB Y Weights mounting (Kg) - = 0,0 - = 0,0 = UR W HIGH FOOT MOUNTING - MS3 UF1 NH/AH MF Weights mounting (Kg) - = 0,0 - = 0,0 TR US AB V AM AU XS AO LA + 1 FEMALE ROD CLEVIS - AP ISO 1 - RP P CK H9/d K max. CM E max. AV LE CE Weights mounting (Kg) - = 0,0 = 0,0 = 0,0 SPHERICAL BEARING ROD END - AP ISO 139 - RP3 P EN h α CN H9 α CE1 LE1 AX KK Weights mounting (Kg) - = 0,030 = 0,0 = 0,070 NECK NUT - MR3 Weights mounting (Kg) - = 0,0 KV BE KW CL KK 1 = Stroke P- AM AO AU AB FB 9 9 AV AX KW LE LE1 MF NH AH 4 4 5 5 14 14 17 17 5,5 5,5,, 11 11 13 15 4 4 5 5 B DIMENSIONS B BE CE CE1 CK CL CM CN E EN K KK KV 4 57 Mx1,5 Mx1,5 Mx1,5 Mx1,5 4 4 3 30 30 3 43 DIMENSIONS +0,4 +0,1 +0,4 +0,1 +0,5 +0,15 +0,5 +0,15 TF TR UR UF UF1 US V W XS Y ZB 3 3 30 30 5 5 3 3 45 45 4 4 54 54 7 11 33,5 33,5 45 5 1 1 19 3 9 9 14 3 3 3,5,5 31 31 Mx1 Mx1 Mx1, Mx1, 70 77 97 19 19 7 7 ASCO/JOUCOMATIC reserves the right to alter the availability and specifications without notice.