Telemaco3P automotive family of telematics and connectivity microprocessor. I/O Interfaces

Similar documents
STA1080, STA1085 STA1090, STA1095

STSW-BLUENRG1-DK. BlueNRG-1, BlueNRG-2 DK SW package

300 ma triple DC-DC converter for powering AMOLED displays. Description. Table 1: Device summary Negative voltage. Auxiliary positive voltage

ASM330LHH. Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope. Data brief. Features. Applications. Description

SPC58NE84E7, SPC58NE84C3

STOD32W. 100 ma triple DC-DC converter for powering AMOLED displays. Applications. Features. Description

L9958 Evaluation board for high current (8.6A) DC and Stepper Motors. Description

STSW-STWBCFWDT. STWBC firmware downloader tool. Description. Features

EMIF06-USD14F3. 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection. Applications. Description. Features.

EMIF06-HSD04F3. 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection. Features. Application.

Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus. Description

SPC58EHx,SPC58NHx. A scalable approach for high-end body, networking and security platforms for Automotive. Description. Features

Dynamic Electro-Thermal simulator for VIPower products. Description

RN0084 Release note. ST-LINK/V2 firmware upgrade. About this release note

EVLKSTCOMET10-1. STCOMET smart meter system-on-chip development kit. Features

SPC584Cx, SPC58ECx. 32-bit Power Architecture microcontroller for automotive ASIL-B applications. Features

EMIF06-HMC02F2. 6-line IPAD, EMI filter including ESD protection. Description. Features. Applications. Complies with the following standards

X-NUCLEO-53L0A1. Ranging and gesture detection sensor expansion board based on VL53L0X for STM32 Nucleo. Description. Features

X-NUCLEO-53L1A1. Long distance ranging Time-of-Flight sensor expansion board based on VL53L1X for STM32 Nucleo. Description.

ESDA7P60-1U1M. High power transient voltage suppressor. Description. Features. Applications. Complies with the following standards:

L9945. Automotive fully configurable 8-channel High/Low side MOSFET pre-driver suitable for 12 V and 24 V systems. Data brief.

EVALKITSTKNX. Miniature transceiver STKNX evaluation and development kit. Features

EV-VNH7040AY. VNH7040AY Evaluation Board. Features. Description

STEVAL-SPBT4ATV3. USB dongle for the Bluetooth class 1 SPBT2632C1A.AT2 module. Features. Description

Description. July 2016 DocID Rev 2 1/6

UM2255 User manual. SPC58NG-DISP user manual. Introduction

SPC584C80C3, SPC58EC80C3

ESDALC20-1BF4. Low clamping, low capacitance bidirectional single line ESD protection. Description. Features. Applications

L9966. FlexInput IC for automotive applications. Data brief. Features. Description

UM2167 User manual. OrCAD PSpice model usage instructions

HSP line ESD protection for high speed lines. Applications. Description. Features. µqfn 4 leads. Benefits. Complies with following standards

P-NUCLEO-IKA02A1. STM32 Nucleo pack: electrochemical toxic gas sensor expansion board with CO sensor. Description. Features

Description. January 2019 DB2381 Rev 3 1/5

STEVAL-PCC010V1. ST802RT1A Ethernet PHY demonstration board with STM32F107 controller add-on board. Features. Description

AN4872 Application note

STA bit single chip baseband controller for GPS and telematic applications. Features

USB Type-C and Power Delivery Nucleo pack with NUCLEO-F072RB expansion board based on STUSB1602. Description

EVAL6494L. Demonstration board for L6494L gate driver. Description. Features

HSP051-4M10. 4-line ESD protection for high speed lines. Applications. Description. Features. Benefits. Complies with following standards

ST Payment Secure Solution Java Card platform with up to 100 Kbytes of user NVM for AMEX payment applications

TN1235 Technical note

A scalable approach to your body, networking and security platforms. Description

ST25DV-DISCOVERY. Discovery kit for the ST25DV04K dynamic NFC/RFID tag. Features

Motor control power board based on the SLLIMM-nano 2 nd series

LD A very low drop adjustable positive voltage regulator. Description. Features

STEVAL-IPMnM2N. Motor control power board based on the SLLIMM-nano 2 nd series. Description. Features. RoHS compliant

AN5123 Application note

HSP051-4N10. 4-line ESD protection for high speed lines. Applications. Description. Features. Benefits. Complies with following standards

ESDA8P80-1U1M. High power transient voltage suppressor. Description. Features. Applications

Getting started with STEVAL-IDB007V1 and STEVAL-IDB008V1 evaluation boards

AN4311 Application note

EMIF03-SIM06F3. 3-line IPAD, EMI filter including ESD protection. Description. Features. Application. Complies with the following standards:

Common mode filter with ESD protection for high speed serial interface

P-NUCLEO-USB001. STM32 Nucleo pack for USB Type-C and Power Delivery. Features. Description

ECMF04-4HSWM10. Common-mode filter with ESD protection. Features. Applications. Description. Complies with the following standards:

STEVAL-ISA164V1. STNRG388A evaluation board. Description. Features

ESDZV5-1BV2. Ultra-low clamping single line bidirectional ESD protection in extra-small package. Datasheet. Features. Applications.

STSW-BNRGUI. BlueNRG GUI SW package. Data brief. Features. Description

ST33F1M, ST33F1M0, ST33F896, ST33F768, ST33F640, ST33F512

EMIF01-SMIC01F2 IPAD. Single line EMI filter including ESD protection. Main application. Description. Benefits. Pin configuration (Bump side view)

Obsolete Product(s) - Obsolete Product(s)

Bluetooth low energy profiles for the X-CUBE-BLE1 expansion for STM32Cube. Description

P-NUCLEO-6180X2. Proximity, gesture, ambient light sensor expansion board based on VL6180X for STM32L053R8. Description. Features

EV-VND7040AJ. VND7040AJ evaluation board. Features. Applications

ECMF02-3F3. Common mode filter with ESD protection. Features. Description. Applications. Complies with the following standard:

AN3996 Application Note

AN2667 Application note

L6460. SPI configurable stepper and DC multi motor driver. Features. Description

ESDA7P120-1U1M. High power transient voltage suppressor

EV-AUTO-LDOS. L5150GJ-L5300AH7-L4995AK Evaluation Board. Applications. Features. Description

ST19NP18-TPM-I2C Trusted Platform Module (TPM) with I²C Interface Features

STSW-BNRG-Mesh. Mesh over Bluetooth low energy. Features. Description. Applications

HSP051-4M10. 4-line ESD protection for high speed lines. Datasheet. Features. Applications. Description

STLC2500D. Bluetooth V2.1 "Lisbon" + EDR. Features. Description

Getting started with the digital MEMS microphone expansion board based on MP34DT01-M for STM32 Nucleo

STM32H7x3I-EVAL. Evaluation board with STM32H7x3XI MCUs. Data brief. Features

SOT23-6L ESDALCL6-2SC6

STM32-SK/KEIL STR91X-SK/KEI, STR7-SK/KEIL

UM2091 User manual. EVAL-L9301 Demo board Hardware documentation. Introduction

USB Type-C and Power Delivery Nucleo pack with NUCLEO-F072RB expansion board based on the STUSB1602

8-line IPAD low capacitance EMI filter and ESD protection in QFN package

P-NUCLEO-53L1A1. VL53L1X nucleo pack with X-NUCLEO-53L1A1 expansion board and STM32F401RE nucleo board. Description. Features

STM32L051x6 STM32L051x8

ST21NFCB. Near field communication controller. Features. RF communications. Hardware features. Communication interfaces. Electrical characteristics

STEVAL-LDO001V1. Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020. Applications. Description.

STM3220G-SK/KEI. Keil starter kit for STM32F2 series microcontrollers (STM32F207IG MCU) Features. Description

STBC ma standalone linear Li-Ion battery charger with thermal regulation. Description. Features. Applications

ST Payment Secure Solution - Java Card platform with up to 90 Kbytes of user NVM for Visa, MasterCard, AMEX, Discover and Interac applications

EMIF02-MIC01F2 2-line IPAD, EMI filter including ESD protection Features Application Description Complies with the standards:

EVAL6235PD. L6235 three-phase brushless DC motor driver demonstration board. Features. Description

STM32 embedded target for MATLAB and Simulink release 3.1. Summary for STM32 embedded target for MATLAB and Simulink release 3.1:

P-NUCLEO-USB001. STM32 Nucleo pack for USB Type-C and Power Delivery Data brief. Features. Description

STM3210B-SK/KEIL STR91X-SK/KEI, STR7-SK/KEIL

EV-VNQ5E050AK VNQ5E050AK evaluation board

HSP061-4M10. 4-line ESD protection for high speed lines. Datasheet. Features. Applications. Description

P-NUCLEO-53L0A1. VL53L0X Nucleo pack with ranging, gesture detection sensor expansion board and STM32F401RE. Description. Features

UM1978 User manual. Multi-sensor RF platform sensor board. Introduction

STMLS05 Applications Description Features Table 1: Device summary I2C base Package Order code address marking

AN626 Application note

AN2672 Application note

Transcription:

ST1385 Telemaco3P automotive family of telematics and connectivity microprocessor Data brief 1x USB 2.0 DR with HS PHY 2x ETH VB MC with RMII/RGMII Features LFBG361 (16x16x1.7, 0.8mm pitch) GPGPS00902 EC-Q100 qualified Grade 2 Core and Infrastructure Dual RM Cortex7 up to 600 MHz, with MMU, FPU and NEON support Memory organization: L1 Cache: 32 KB I, 32 KB D L2 Cache: 256 KB Total embedded SRM: 768 KB 32-bit watchdog timer 16-channels DM 8x 32-bit free running times/counters 5x 16-bit Extended Function Timer (EFT) with input capture/output compare and PWM Real Time Clock (RTC) with fraction readout Embedded Vehicle Interface Isolated Cortex-M3 core L1 Cache: 8 KB I 256 KB reserved embedded SRM (extendible to 768 KB) 1x CN Standard (C_CN) 2x CN FD (M_CN) 1x Flexray Media Interfaces 1x SD/MMC/SDIO SDR50 (SD/MMC0) 1x SD/MMC/SDIO SDR25 (SD/MMC1) 1x USB 2.0 DR with HS PHY and HSIC Embedded HW Security Module HIS SHE/SHE+ Service Set with extensions for PKC (SHE_EXT) Cryptographic Functions ccelerators Symmetric keys: MP ES Public keys: RS, ECC Hash: MD5, SH1, SH2, SH3 True Random Number Generator Memory Interfaces 16-bit DDR3L-1066 (533 MHz) 16-bit LPDDR2-800 (400 MHz) SQI Interface 8-bit Parallel NND (1 chip select) I/O Interfaces 1x 6-channel 10-bits DC 3x I2C multi-master/slave interfaces 6x URT 3x Synchronous Serial Port (SSP/SPI) 5x 32-bit GPIO ports JTG based in-circuit emulator (ICE) with Embedded Trace Module Operating Conditions VDD, VDD_RM: 1.14 V-1.21 V VDD_IO_3V3: 3.3 V ±10% VDD_IO_SDMMC0: 1.8 V/3.3 V ±10% VDD_IO_BOOT: 1.8 V/3.3 V ±10% VDD_IO_ON: 3.3 V ± 10% VDDQ: 1.35 V ± 5% (DDR3L) -40 C/+105 C ambient temperature Table 1: Device summary Order code Package Packing ST1385 LFBG 361 16x16x1.7mm Tray October 2017 DocID031140 Rev 1 1/6 For further information contact your local STMicroelectronics sales office. www.st.com

Description ST1385 1 Description ST1385 is a fully automotive, power efficient System-On-Chip, targeting cost effective processing solutions for innovative Telematics and Connectivity applications including Cyber-security protection. It features a powerful Dual RM Cortex-7 processor, an embedded and independent Hardware Security Module (HSM), an isolated sub-system based on RM Cortex-M3 for vehicle CN interface and a full set of standard connectivity interfaces, including a dual Gbit ETH VB controller and Flexray. Figure 1: pplication example GDG1310170825PS 2/6 DocID031140 Rev 1

e E1 E Z ST1385 Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPCK packages, depending on their level of environmental compliance. ECOPCK specifications, grade definitions and product status are available at: www.st.com. ECOPCK is an ST trademark. 2.1 LFBG361 (16x16x1.7mm) package information Figure 2: LFBG361 (16x16x1.7mm) package outline B D D1 SETING PLNE C e Z 4 2 W V U T R P N M L K J H G F E D C B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 1 CORNER INDEX RE Ø b (361 BLLS) eee M C fff M C B 1 ddd C BOTTOM VIEW 8125732_C_XN GPGPS03418 Table 2: LFBG361 (16x16x1.7mm) package mechanical data Ref Dimensions (mm) Min. Typ. Max. - - 1.7 1 0.25 - - 2-0.3-4 - - 0.8 b 0.35 0.4 0.48 D 15.85 16 16.15 DocID031140 Rev 1 3/6

Package information ST1385 Dimensions (mm) Ref Min. Typ. Max. D1-14.4 - E 15.85 16 16.15 E1-14.4 - e - 0.8 - Z - 0.8 - ddd - - 0.1 eee - - 0.15 fff - - 0.08 4/6 DocID031140 Rev 1

ST1385 Revision History 3 Revision History Table 3: Document Revision History Date Version Changes 13-Oct-2017 1 Initial release. DocID031140 Rev 1 5/6

ST1385 IMPORTNT NOTICE PLESE RED CREFULLY STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. ll other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. 2017 STMicroelectronics ll rights reserved 6/6 DocID031140 Rev 1