KTY84 PT1000 changeover Migration drives and motors
SIMOTICS Motors for Motion Control Explanation to the tables The following tables give an overview of the motors and whether a change to PT1000 occurred. Family Motor type KTY PT1000 SIMOTICS S Which temperature evaluation is supported Page 2
SIMOTICS S Family Motor type KTY PT1000 1FS6 1FT3 SIMOTICS S 1FT5 unaffected 1FT6 1FT7 1FG1 1FL5 unaffected 1FL6 unaffected 1FK6 1FK7 G1 SH 20 and SH 28 1FK7 G1 SH 36 - SH 100 including DYA and Stöber 1FK7 G2 Page 3
SIMOTICS M Family Motor type KTY PT1000 SIMOTICS M 1FE1 1FE2 1PH2 EWN 1PH2 NMA 1PH4 1PH7 1PH8 1PL6 1PM4 1PM6 Page 4
SIMOTICS L and SIMOTICS T Family Motor type KTY PT1000 SIMOTICS L SIMOTICS T 1FN CUSTOMIZED 1FN1 1FN2 1FN3 1FN4 1FN6 1 EXTERNAL-ROTOR SEGMENT MOTOR AXIAL SEGMENT MOTOR RADIAL 16 13 Page 5
Application specific motors and motor spindles Family Motor type KTY PT1000 Application specific motors Motor spindles 1FE9 1FU8 1FV5 1PV5 2SP1 Application specific spindles JBD:xxx Page 6
SINAMICS Explanation to the tables The following tables give an overview of actually supported temperature evaluation respectively firmware release for the evaluation of PT1000 for motors without DRIVE-CLiQ interface. Motor temperature sensor Family Control Unit / version PTC KTY Bimetalopener Current PT1000 PT1000 evaluation with S120 xxxx 2.6 Which temperature evaluation is supported by the topical state PT1000 temperature evaluation with Page 7
SINAMICS S / SINUMERIK / SIMOTION D Motor temperature sensor Family Control Unit / version PTC KTY Bimetalopener Current PT1000 PT1000 evaluation with SINAMICS S120 CU310 PN / DP V2.6 CU320 DP V2.6 Page 8 CU310-2 PN / DP V4.7 V4.8, V4.7 HFx 1) CU320-2 PN / DP V4.7 V4.8, V4.7 HFx 1) SINAMICS S110 CU305 (all versions) V4.4 SP3 SINUMERIK SIMOTION 840Dsl incl. NX10.3, NX15.3 2) 828D incl. NX10.3, NX15.3 2) V4.5 SP5 V4.7 SP1 V4.5 SP5 SINUMERIK V4.8, V4.7 SP2 HF1, V4.5 SP6 SINUMERIK V4.8, V4.7 SP2 HF1, V4.5 SP6 808D unaffected uneffected SIMOTION V4.4 SIMOTION (with SINAMICS V4.5 (with SINAMICS D410-2 Integrated V4.7) Integrated V4.8) D4x5-2 incl. CX32-2 2) SIMOTION V4.4 (SINAMICS Integrated V4.7) SIMOTION V4.5 (with SINAMICS Integrated V4.8) 1) Exact appointments and HF names will be communicated at product level about Siemens Industry Online Support 2) NUMERIK/Controller-Extensions NX10.3, NX15.3, CX32-2 always have the same version like SINAMICS Integrated
SINAMICS G Motor temperature sensor Family Control Unit / version PTC KTY Bimetalopener Current PT1000 PT1000 evaluation with CU240E (USS) CU240S (all versions) V3.2.3 G120 CU240B-2 + CU240E-2 (6SL3244-0BBxx-1xA0) CU240B-2 (all versions) CU240E-2 (all versions) V4.3 V4.4, V4.5, V4.6, V4.7, V4.7 SP3 V4.4, V4.5, V4.6, V4.7, V4.7 SP3 Upgrade of firmware version V4.5 and later possible Upgrade of firmware version V4.5 and later possible CU250S-2 (Vector - all versions) V4.6, V4.7, V4.7 SP3 Vector CU230P-2 (all versions) (6SL3243-0BA30-1xA0) V4.2 G120P CU230P-2 (all versions) (6SL3243-0BB30-1xA1) CU230P-2 (all versions) (6SL3243-0BB30-1xA2) V4.3 V4.4 CU230P-2 (all versions) (6SL3243-0BB30-1xA3 + 6SL3243-0BB30-1FA0) V4.6, V4.7, V4.7 SP3 Upgrade of firmware version V4.6 and later possible G120C (Step 1) G120C Step 1 (all versions) (6SL3210-1KExx-xxx0) V4.5 G120C (Step 2) G120C Step 2 (all versions) (6SL3210-1KExx-xxx1) V4.6, V4.7, V4.7 SP3 Page 9
SINAMICS G and ET200 Motor temperature sensor Family Control Unit / version PTC KTY Bimetalopener Current PT1000 PT1000 evaluation with G120D CU240D PN / DP (all versions) (6SL3544-0FA2x-1xA0) CU240D-2 PN /DP (all versions) (6SL3544-0FB20-1xA0) V3.4 V4.5, V4.6, V4.7, V4.7 SP3 CU240D-2 PN F FO (6SL3544-0FB21-1FC0) V4.7, V4.7 SP3 CU250D-2 PN F FO (6SL3546-0FB21-1FC0) V4.7, V4.7 SP3 G110 V1.21 G110M G110M (USS/Modbus, DP, PN) (6SL3544-0xx02-1xx0) G110M (AS-i) (6SL3544-0xx02-1Mx0) G110D ET200S FC ET200pro FC ET200pro FC-2 Control Unit ICU24 (all versions) (6SL3244-0SA0x-1AAx) ET200pro FC (6SL3235-0TE21-1RB0) ET200pro FC-2 (6SL3514-1KE13-5AE0) V4.6 HF14, V4.7, V4.7 SP3 V4.7 SP3 V3.61 V3.1 V3.1 V4.7 SP3 planed Upgrade of firmware version V4.5 and later possible Under clarification Page 10
SINAMICS MICROMASTER Motor temperature sensor Family Control Unit / version PTC KTY Bimetalopener Current PT1000 PT1000 evaluation with MICRO MASTER MM 420 (6SE6420-2xxx-xxxx) MM 430 (6SE6430-2xxx-xxxx) MM 440 (6SE6440-2xxx-xxxx) V1.31 V2.22 V2.21 Support with successor product G120C Support with successor product G120P Support with successor product G120 modular Page 11