PAD LOCK code: PL369 PL369 Shackle size: Ø3.2mm W32 x D15 x H56.5mm Housing material: ABS Weight: 20g 1. The preset open combination at factory is 0-0-0. 2. Turn shackle 90 (as fig. shown) after the lock is opened, push shackle downward and press firmly, then turn dials to your desired numbers. 3. Release shackle, your new combination is now set.
code: TSA192 The zipper lock is preset at 0-0-0 The original combination is 0-0-0. To set your own combination, please follow these easy steps: Setting Push A and hold it without releasing. Turn D to the combination of your choice. Release A. Locking Turn D to the combination you have Set Put B into the slots C. Turn D to any combination other than the one you set. Unlocking Turn D to the combination you set Push E in the direction of arrow.
TSA PAD LOCK code: TSA302 Shackle A Dials B C The original combination is 0-0-0. To set your own combination, please follow these easy steps: 1. Pull up the shackle to open the lock (A). 2. Rotate the shackle 90 counterclockwise and press all the waydown (B). Hold down and continue to turn another 90 counterclockwise (C). 3. Set your own combination by turning the dials. 4. Turn the shackle back as normal. Then the setting is completed. To reset to a new combination, please repeat steps 1 to 4 above. Please remember your new combination.
code: QL275 SETTING YOUR OWN COMBINATION TO OPEN THE LOCK TO RESET THE LOCK STEP 1 Turn the dials to the last set combination. The original combination, set from factory, is 0-0-0. unlocking direction diagram STEP 2 According to the arrow guidance on the lock body, rotate the lock 45 degrees in the direction of illustrated arrow. STEP 1 Turn the dials to the last set combination. The original combination, set from factory, is 0-0-0. Slide down the Reset Button A to RESET position. STEP 2 Turn the dials to set your own combination. STEP 3 Slide up the Reset Button A to RESET to the original position. Your lock will now open at your own personal combination.
code: JY-D216 Reset Button 1 Button push to open 4 Dials 2 Indication Line 3 The original number is preset at 0-0-0. TO SET YOUR PERSONAL COMBINATION, PLEASE FOLLOW THE BELOW STEPS 1. Set the dials (2) at its original numbers 0-0-0 aligned to the indication line (3) 2. Open the lock by pushing the button (4) 3. Press down the reset button (1) with a tool until you hear a click sound. 4. Set the dials (2) to any number you want; for example 8-8-4 5. Push the button (4) towards the direction of arrow and the reset button (1) will be back when you hear the click sound. Your new personal combination is now memorised.
code: JY-D216 Set Button 1 Button push to open 4 Dials 2 Indication Line 3 RESET To reset the combination, please follow steps 1-5 by using the last memorised combination. HOW TO USE THE COMBINATION LOCK 1. Allign the dials (2) to the indication line (3) by using last memorised numbers, than push the button (4) to the left to open the lock 2. Press down the lock body to latch the luggage, then turn the dials (2) randomly to any numbers except those which were last memorised.
code: TSA669 A B C To set your own combination, follow these steps: 1. 0pen the lock A (The original number is 0-0-0). 2. Press down the reset button B with a tool until you hear the click sound. 3. Set your combination by turning the dials C (for example 8-8-8). 4. Push the button A to the open position and let the reset button slide back until hear the click sound. Now your personal combination is set. Remember your personal combination by heart. WARNING If the cylinder is opened, please pay attention to lock it again by rotating it 90 anticlockwise. (Any tool which can be inserted in the cylinder is OK) RESET To reset the combination, please follow steps 1-4 by using the last memorised combination.
TSA FRAME LOCK code: EM048 Lever A A B B Your combination lock is preset at 0-0-0. You may leave it at this setting or reset to your own confidential setting as follows: 1. Open your case and locate the change shift lever extending from the back of the lock. 2. Move the change shift lever from A to B. 3. Set three dials to a number you are familiar with. 4. Leave dials set to your combination, return shift lever from B to A. 5. Record your personal combination you can reset at any time RESET To reset the combination, please follow steps 1-4 by using the last memorised combination.
code: TSA13102 Reset Button B press down to reset Push to open Button A Dials C To set your own combination, follow these steps: 1. 0pen the lock A (The original number is 0-0-0). 2. Press down the reset button B with a tool until you hear the click sound. 3. Set your combination by turning the dials C (for example 8-8-8). 4. Push the button A to the open position and let reset button back until hear the click sound. Now your personal combination is set. Remember your personal combination by heart. RESET To reset the combination, please follow steps 1-4 by using the last memorised combination.
code: JY-B101 Reset Button B press down to reset Button A push to open Dials C To set your own combination, follow these steps: 1. 0pen the lock A (The original number is 0-0-0). 2. Press down the reset button B with a tool until you hear the click sound. 3. Set your combination by turning the dials C (for example 8-8-8). 4. Push the button A to the open position and let reset the button back until hear the click sound. Now your personal combination is set. Remember your personal combination by heart. RESET To reset the combination, please follow steps 1-4 by using the last memorised combination.
TSA FINGERPRINT LOCK code: ZL-751 L CKS HOW TO RESET YOUR FINGERPRINT LOCK Function indication area 1. Release button 2. Charging port 3. Power/Light 4. Fingerprint Sensor 5. Holes for puller 6. A Push button to enroll fingerprints 7. A+B Press A+B to delete registered fingerprints FINGERPRINTS REGISTRATION: Without any registered fingerprint 1. Press A and the green light will flash 2. Put the finger you need to register on the sensor screen for 6 times Note: the direction of the fingerprints should be the same 3. Enter the next new fingerprint only after the buzzer beep a sound 4. Wait for the light off for seconds if confirming not to enroll any new fingerprint for registration FINGERPRINTS REGISTRATION: Registered fingerprints are existed 1. Press A and the red light will flash 2. Unlock by any registered fingerprint you registered Note: There is only one chance to unlock and repeat the 1st step to unlock again if the recognition process is wrong 3. The green light will flash if confirming successful 4. Put the finger you need to register on the sensor screen for 6 times Note: the direction of the fingerprints should be the same 5. Enter the next new fingerprint only after the buzzer beep a sound 6. Wait for the light off for seconds if confirming not to enroll any new fingerprint for registration
TSA FINGERPRINT LOCK code: ZL-751 L CKS DELETE FINGERPRINTS 1. Press A + B, now the red and green lights will flash alternatively for 5 times 2. Then the red and green lights will be on simultaneously 3. Now the system returns to initialization and standby OPEN THE LOCK 1. Press down the power button, enter the registered fingerprints on the sensor screen before the red light is off 2. The light will turn green with correct fingerprints. 3. Press the button to release the zipper puller before the light flashes off. Note: The red light continues to flash and buzzer beeps for warning, beep beep beep 3 sounds, if the fingerprint recognition fails. Please make sure these fingerprints are registered and the direction should be corresponding to the registered one. POWER SUPPLY 1. Battery Specification: 3 PCS AAA battery (i.e., No. 7 batteries, alkaline batteries are also applicable) 2. Battery installation: in accordance with the instructions of + - installing the battery, then press the button lights. Please close the battery cover after the battery is properly installed, which the indicator appears alternating red and green flashes. 3. External power supply: when the battery is exhausted, the user can be connected to the Micro USB on the fingerprint lock for providing power to unlock. 4. Battery life: 2500 times unlock or standby for 1 years, but will vary by the type of battery
code: E-290UX B D A F Figure 1 Figure 2 G F C E push the button A Figure 3 Figure 4 H 1. Following the arrow, push the button (A) as in figure 1. 2. Turn the three dials (D) to your preferred three-digit code. 3. Push the button (A) back to its original position as in figure 2. Now your personal combination is set down. Remember your pesonal combination by heart. 4. External USB port : Put your Power Bank into the pocket. Connect it via USB cable to Micro USB port (G) as in Figure 3. Open (F), plug the electronic device into the USB port (H) to charge as in Figure 4 Power bank and USB cable are not included in the luggage. RESET To reset the combination, please follow steps 1-3 by using the last memorised combination.
code: YF17102 Display Window (4) Button (1) Dial (3) Reset button (2) The original number is preset to 0-0-0 To set your own combination, follow these steps: 1. Open the lock by pushing the button (1). 2. Turn the reset button (2) from OFF to SET. 3. Set the dials (3) to your personal combination for example 8-8-8. 4. Turn the reset button (2) from SET to OFF. Your new personal combination is now set. To reset the combination please follow steps 1-4 by using the last set combination. HOW TO USE THE COMBINATION LOCK 1. Align the last set combination with the number dials (3), then push the button (1) to open the lock. 2. Press down the movable part of the lock to latch the lock, then turn the dials (3) randomly to any numbers except those of the set combination. Now your suitcase is locked.