Better all-round. X coded D coded 10 GBE PoE+ DataVoice Circular connectors STX M12x1 IP67 Connector series for industrial applications
STX M12x1 IP67 connector series With the STX M12x1 IP67 connector series, Telegärtner offers solutions for the demand of the industry for consistent cabling of industrial communication networks in accordance with IEC 61918 which prescribes M12x1 circular connectors in 4- and 8-pole versions as a plug interface. The series contains M12x1 D- and connectors which are suitable for connecting to both solid conductors and stranded wire cables as well as offering 360 shield contacting. Another part of the STX M12x1 IP67 connector series are printed circuit board bulkhead sockets with housings for front or back mounting. The range is rounded off by pre-assembled connecting cables for the device connection between machines/terminating equipments or machine/terminating equipment to the control cabinet. Designed for transmitting maximum data rates in industrial applications As 4-pole, D-coded compact connectors in Cat.5e, the M12 from Telegärtner can transmit data rates up to 100 Mbit/s in the PROFINET environment. in Cat.6 A, the 8-pole version can transmit data rates up to 10 Gbit/s according to CDV IEC 61076-2-109. The high bandwidth is ensured by separating the four pairs transmission technically by a cross shield (X-coding). Additionally a power supply to connected terminating equipments is possible. The STX M12x1 connector series can be used for applications such as security and video surveillance (CCTV), passenger information systems (PIS), production systems or production monitoring with high-resolution cameras. Users can connect X-ray machines for baggage inspection at airports, for example, encapsulated and safe from manipulation with the M12 circular connector. But the M12 is also a real trump card in railway vehicles: It helps to distribute the increasing data volume reliably and to transmit the data to all connected systems and devices in the train, for example, to cameras or switches. Renewable energy Transport Industrial applications
STX M12x1 Bulkhead Sockets IP67 An important part of the STX M12x1 connector series are the bulkhead sockets in Cat.6 A. They are available with housings for front or back mounting as well as versions without housings with a fourfold shield connection to the printed circuit board and feature versatile mounting possibilities. one foot print for all bulkhead socket designs plug interface CDV IEC 61076-2-109 full metal shielding between contact pairs fourfold shield connection STX M12x1 Bulkhead Socket Mechanical Characteristics Connectors CDV IEC 61076-2-109 Insertion force 30 N Durability (mating cycles) 100 Material: housing zinc diecast nickel plated / brass nickel plated Material: contact body PA Material: contacts CuSn Material: contact finish Au Material: gaskets FKM; NBR Environmental Requirements Shock 50 g Protection against particulate ingress IP6X Protection against water / immersion IPX7 Ambient temperature -40 C to +85 C Electrical Characteristics Contact resistance 5 mω Insulation resistance 100 mω Voltage proof: contact-contact 500 V, DC Voltage proof: contact-shield 500 V, DC PoE+ acc to IEEE 802.3at Adequate for Power over Ethernet+ Transmission Characteristics 10 Gigabit Ethernet acc. to IEEE 802.3an Adequate for 10 Gigabit Ethernet Category 6 A ISO/IEC 11801; DIN EN 50173-1 Class E A ISO/IEC 11801; DIN EN 50173-1
STX M12x1 Cable Plug IP67 The basic structure of the new Telegärtner connector with X-coding corresponds to M12 system in world-wide use that has found its way into applications in many different branches with extreme conditions thanks to its compact design and industrial compatibility. The extremely robust M12x1 connector in Cat.6 A from the STX programme can be fitted on site without any special tools. This assembly-friendly connector also features very good shield contacting and covers a wide range of wire diameters (0.9 1.6 mm) and cable diameters (5.5 9 mm). shield cover for 360 shielding contact robust zinc die cast housing plug interface CDV IEC 61076-2-109 full metal shield between pairs of wire insulation displacement contact (IDC) AWG27-22/7 and AWG24-22/1 vibration protection wire manager visually coded to connector housing STX M12x1 Cable Plug Mechanical Characteristics Connectors CDV IEC 61076-2-109 Insertion force 30 N Durability (mating cycles) 100 Material: housing zinc diecast nickel plated / brass nickel-plated Material: wire pair presorting PA UL94 V0 Material: shield German silver Material: pressure screw brass nickel-plated Material: contacts brass Material: contact finish Au over Ni Wire diameter 0.9-1.6 mm Cu-Conductor diameter: stranded 0.46-0.76 mm (AWG27-22/7) Cu-Conductor diameter: solid 0.51-0.64 mm (AWG24-22/1) Cable diameter 5.5-9.0 mm Environmental Requirements Shock 50 g Protection against particulate ingress IP6X Protection against water / immersion IPX7 Ambient temperature -40 C to +85 C Electrical Characteristics Contact resistance 10 mω Insulation resistance 100 mω Voltage proof: contact-contact 500 V, DC Voltage proof: contact-shield 500 V, DC PoE+ acc to IEEE 802.3at Adequate for Power over Ethernet+ Transmission Characteristics 10 Gigabit Ethernet acc. to IEEE 802.3an Adequate for 10 Gigabit Ethernet Category 6 A ISO/IEC 11801; DIN EN 50173-1 Class E A ISO/IEC 11801; DIN EN 50173-1
STX M12x1 Connecting Cable For the connection between machines or other terminating equipments as well as connection of the machine or terminating equipment to the control cabinet, Telegärtner also offers preassembled connecting cables in Cat.6 A. The connecting cables M12x1 with x-coding have an S/FTP 4x2xAWG26/7 PUR structure and are suitable for an increased temperature range of -40 C to + 85 C. S/FTP 4x2xAWG26/7 Cat.7 PUR PUR overmoulding robust zinc die cast housing plug interface CDV IEC 61076-2-109 short and slim design high packing density full metal shield between pairs of wire vibration protection STX M12 Connecting Cable Connecting Cable S/FTP Cat.7 PUR Mechanical Characteristics Durability (mating cycles) M12 100 Durability (mating cycles) RJ45 750 Cable structure LI02YSC11Y PUR 4x2xAWG 26/7 PiMF Stranded wire AWG26 (7 x 0.16 mm) Wire insulation Foam PE, Ø 1.04 mm Pair shielding Al-foil, outside conducting Overall shielding tin plated copper braid Outer jacket Ø 6.2 ±0.2 mm Colour RAL 6018 Thermal and Climatic Characteristics UL E344985 flame-retardant test IEC 60332-1 Operating temperature in C -40 C to 85 C The technical data for the connectors can be extracted from the table on the left.
Assembly of the STX M12x1 connector Thanks to an intelligent wire management and a simple screw connection system, the individual components of the STX M12x1 cable plug can be assembled quickly and easily on site completely without the use of special tools. Step 1: Prepare cables Slide over cable gland and seal at least 40 mm Remove outer jacket, fold braid shield backwards Pre-sort pairs of wire Step 2: Insert cables Insert pairs of wire into the wire manager, actuate the shield spring Untwist pairs of wire, insert the individual wires into the wire manager and cut off protruding wire flush Step 3: Screw on connector Insert wire manager into plug body (pay attention to position) Tighten the cable gland with an open-ended wrench Use an additional seal for cable diameters between 5.5 and 7.5 mm
Versatile mounting possibilities Front or back mounting: Telegärtner always offers component manufacturers the right solution for integration into their products. Back mounting: M12 bulkhead socket 2 piece design distance from PCB to housing 10 mm Order no.: J80120A0120 Back mounting: M12 bulkhead socket 1 piece design distance from PCB to housing 10 mm Order no.: J80020A0120 Back mounting: M12 bulkhead socket 1 piece design distance from PCB to housing 6.7 mm Order no.: J80020A0121 Back mounting: M12 bulkhead socket without housing distance from PCB customer-specific Order no.: J80220A0120 Front mounting: M12 bulkhead socket 1 piece design distance from from PCB to housing 12.7 mm Order no.: J80020A0122
Order Information: Product Order no. Description Coding M12x1 Cable Plug J80026A0200 STX M12x1 CP D-cod. Cat.5 4 pole, D-coded, straight, plug set, 360 shielding, screw termination, length of connector: 70 mm, field assembly M12x1 Bulkhead Socket J80120A0220 J80020A0221 J80020A0222 J80220A0220 STX M12x1 BS D-cod. Cat.5 4 pole, D-coded, straight, 2 pc. single design, screen connection single, solder connection THR, gap to PCB 10 mm, back mounting STX M12x1 BS D-cod. Cat.5 4 pole, D-coded, straight, 1 pc. design, screen connection quad, solder connection THR, gap to PCB 5.7 mm, back mounting STX M12x1 BS D-cod. Cat.5 4 pole, D-coded, straight, 1 pc. design, screen connection 360, solder connection THR, gap to PCB 11 mm, front mounting STX M12x1 BS D-cod. Cat.5 4 pole, D-coded, straight, without housing, screen connection single, solder connection THR, back mounting D-coded M12x1 Cable Plug J80026A0100 STX M12x1 CP X-cod. Cat.6 A 8 pole,, straight, plug set, 360 shielding, IDC, plug length: 59 mm, field assembly M12x1 Bulkhead Socket J80020A0120 J80120A0120 J80020A0121 J80020A0122 J80220A0120 STX M12x1 BS X-cod. Cat.6 A 8 pole,, straight, 1 pc. (J80020A0120) resp. 2 pc. (J80120A0120) design, screen connection quad, solder connection THR, gap to PCB 10 mm, back mounting STX M12x1 BS X-cod. Cat.6 A 8 pole,, straight, 1 pc. design, screen connection quad, solder connection THR, gap to PCB 6,7 mm, back mounting STX M12x1 BS X-cod. Cat.6 A 8 pole,, straight, 1 pc. design, screen connection quad,solder connection THR, gap to PCB 12,7 mm, front mounting STX M12x1 BS X-cod. Cat.6 A 8 pole,, straight, without housing, screen connection quad, solder connection THR, gap to PCB customized, back mounting J80029A0100 STX M12x1-M12x1 CO X-cod. Cat.6 A mating face 1: 8 pole,, straight; mating face 2: 8 pole,, straight; Cat.6 A M12x1 Coupler J80629A0100 J80029A0200 STX M12x1-M12x1 CO X-cod. Cat.6 A mating face 1: 8 pole,, straight; mating face 2: 8 pole,, angled; Cat.6 A STX M12x1-RJ45 CO X-cod. Cat.6 A mating face 1: 8 pole,, straight; mating face 2: RJ45, straight; Cat.6 A J80629A0200 STX M12x1-RJ45 CO X-cod. Cat.6 A mating face 1: 8 pole,, straight; mating face 2: RJ45, angled; Cat.6 A H80030A0008 STX M12x1 plug protective cap with wrist strap M12x1 Accessories H80030A0009 H80030A0010 STX M12x1 socket protective cap STX M12x1 socket protective cap with wrist strap for D- and
Connecting Cables: M12x1 D-coded 2x M12x1 Cable Plug black overmoulded IP67 Cable: SF/UTP, 2x2xAWG22/7, Cat.5, PUR, Outer Jacket green M12x1 Cable Plug black overmoulded IP67 to RJ45 Plug Crimp IP20 Cable: SF/UTP, 2x2xAWG22/7, Cat.5, PUR, Outer Jacket green M12x1 Cable Plug black overmoulded IP67 to free cable end Cable: SF/UTP, 2x2xAWG22/7, Cat.5, PUR, Outer Jacket green Length 0.5 m L80210A0000 L80310A0000 L83610A0000 Length 1.0 m L80210A0001 L80310A0001 L83610A0001 Length 2.0 m L80211A0000 L80311A0000 L83611A0000 Length 3.0 m L80212A0000 L80312A0000 L83612A0000 Length 5.0 m L80213A0000 L80313A0000 L83613A0000 Length 7.5 m L80214A0000 L83614A0000 Length 10.0 m L80215A0000 L83615A0000 M12x1 2x M12x1 Cable Plug black overmoulded IP67 Colour Outer jacket green M12x1 Cable Plug black overmoulded IP67 to RJ45 Plug Crimp IP20 Colour Outer jacket green M12x1 Cable Plug black overmoulded IP67 to free cable end Colour Outer Jacket green Length 0.5 m L80000A0000 L80100A0000 L83500A0000 Length 1.0 m L80000A0001 L80100A0001 L83500A0001 Length 2.0 m L80001A0000 L80101A0000 L83501A0000 Length 3.0 m L80002A0000 L80102A0000 L83502A0000 Length 5.0 m L80003A0000 L80103A0000 L83503A0000 Length 7.5 m L80004A0000 L80104A0000 L83504A0000 Length 10.0 m L80005A0000 L80105A0000 L83505A0000 M12x1 M12x1 Cable Plug black overmoulded IP67 to M12x1 Cable Socket black overmoulded IP67 Colour Outer Jacket green M12x1 Cable Socket IP20 to RJ45 Plug Crimp IP20 Colour Outer Jacket green M12x1 Cable Socket black overmoulded IP67 to free cable end Colour Outer Jacket green Length 0.5 m L82000A0000 L82100A0000 L84500A0000 Length 1.0 m L82000A0001 L82100A0001 L84500A0001 Length 2.0 m L82001A0000 L82101A0000 L84501A0000 Length 3.0 m L82002A0000 L82102A0000 L84502A0000 Length 5.0 m L82003A0000 L82103A0000 L84503A0000 Length 7.5 m L82004A0000 L84504A0000 Length 10.0 m L82005A0000 L84505A0000
Other industrial cabling components from the STX programme In factory, machine or plant cabling: With the industrial connectors of Variant 1, Variant 4, Variant 5 and Variant 14 from the STX platform and industrial connectors of Variant 6, Telegärtner offers you top class, standard-compliant Industrial Ethernet solutions. More information about our STX programme is available from your dealer or under www.telegaertner.com/stx Telegärtner Karl Gärtner GmbH Lerchenstr. 35 D-71144 Steinenbronn Tel.: +49 (0) 71 57/1 25-100 Fax: +49 (0) 71 57/1 25-120 Email: Web: info@telegaertner.com www.telegaertner.com Your distributor: T00013A0263 1. Edition 11/13