P10 Handheld POS Terminal Product Specification 1.00 Doc name: 07-PS-P10 P10 Handheld POS Terminal 1.00.docx
Contents 1.0. Introduction... 3 2.0. Features... 4 3.0. Supported Card Types... 5 3.1. MCU Cards... 5 3.2. Contactless Cards... 5 4.0. Typical Applications... 6 5.0. Technical Specifications... 7 Page 2 of 9
1.0. Introduction P10 is a handheld POS terminal. Primarily designed for a multi-application environment, it can access any contact and contactless smart card following the ISO7816 and ISO14443 standards. This portable pinpad reader has a dual smart card interface and a contactless card reader module. It runs with 32-bit MCU, and has LED indicators, 128 x 64 high-resolution graphical LCD, buzzer, rechargeable battery and large programmable memory. Through these features, it enables users to perform secure smart card transactions in both in-house and field environments. P10 provides the unique advantage of having two modes PC-linked and Standalone to cater to unique user requirements. For its PC-linked mode, it connects to the PC via its USB cable; while for its Standalone mode, it uses its Lithium Ion Battery to run wirelessly. It also comes with a serial interface port that enables connection to other peripherals. Figure 1-1 P10 Appearance Page 3 of 9
2.0. Features 32-bit CPU with mass storage memory 16 / 32 / 64 Mb flash 8 / 16 / 32 Mb PSRAM 128 64 dot-matrix graphic LCD display with backlight 4 LED status indicators 17-key keypad Contactless Smart Card Reader/Writer Built-in antenna for contactless tag access, with card reading distance of up to 50 mm Supports ISO 14443 Part 4 Type A and B cards and MIFARE Classic series Built-in anti-collision feature (only one tag is accessed at any time) Contact Smart Card Reader/Writer Supports ISO 7816 Class A, B, and C (5 V, 3 V and 1.8 V) Supports microprocessor cards with T=0 or T=1 protocol SAM Interface Two SAM slots ISO 7816 compliant SAM slot (Class B) USB 2.0 full speed Mass Storage Compliance Support firmware upgrade Built-in RTC Support 3DES and RSA algorithm Lithium Ion Battery: 3.7V, 2000 mah Wireless Communication GPRS/GSM (Optional) WiFi (Optional) Bluetooth (Optional) Certifications / standards qpboc Level 1 qpboc Level 2 Telecom Equipment Access to Network License UnionPay Terminal Product Access to Network License UnionPay Card Offline Transaction Terminal Page 4 of 9
3.0. Supported Card Types 3.1. MCU Cards P10 operates with MCU cards that follow: T=0 or T=1 protocol ISO 7816-Compliant Classs A, B, C (5V, 3V, 1.8V) 3.2. Contactless Cards P10 supports the following memory cards: 1. ISO 14443-Compliant, Type A & B Standard, parts 1 to 4, T=CL protocol 2. MiFare Classic Page 5 of 9
4.0. Typical Applications e-healthcare Transportation Banking and Payment e-purse and Loyalty e-government Page 6 of 9
5.0. Technical Specifications Physical Specifications Dimensions... 179mm (L) x 78mm (W) x 41mm (H) Case Color... Black Weight... 285g Processor ARM 32-bit Memory Memory... 16/32/64 Mb Flash... 8/16/32 Mb PSRAM Power Power Source... Battery Supply Voltage... 5 V DC Supply Current... Max. 500 ma Rechargeable Lithium Ion Battery Voltage... 3.7 V Capacity... 2000 mah Charge Source... Micro USB Port Charge Time... Max.3 hrs USB Interface Type... Micro USB, USB full speed Power Source... From USB Speed... 12 Mbps Firmware... Upgradable through USB interface Interface Class... Mass Storage compliance Wireless Connectivity (Only support one of the following) WiFi... IEEE 802.11 b/g/n (Optional) Quad-band GSM/GPRS... 850 MHz/900 MHz/1800 MHz /1900 MHz (Optional) Bluetooth... Bluetooth 4.0 with dual mode supported (Optional) Page 7 of 9
Contactless Smart Card Interfacee Standard... ISO-14443 A & B part 1-4 Protocol... Mifare Classic Protocols, T=CL Smart Card Read /Write Speed... 106 kbps Operating Distance... Up to 50 mm Operating Frequency... 13.56 MHz Contact Smart Card Interface Number of Slots... 1 ID-1 Slot Standard... ISO/IEC 7816 Class A, B, C (5V, 3V, 1.8V) Protocol... T=0; T=1 Supply Current... Max. 50 ma Short Circuit Protection... (+5) V /GND on all pins Card Connector Type... ICC Slot 0: Landing Smart Card Read /Write Speed... 9,600-115,200 bps Card Insertion Cycles... Min. 200,000 SAM Card Interface Number of Slots... 2 ID-000 slots Card Connector Type... Contact Standard... ISO/IEC 7816 Class B (3V) Protocol... T=0; T=1 Smart Card Read /Write Speed... 9,600-115,200 bps Built-in Peripherals LCD Display... 128 64 dot-matrix LCD display with backlight Buzzer... Monotone LED Status Indicators... 4 LEDs for indicating status (from left most: blue, yellow, green, red) Operating Conditions Temperature... 0 C 50 C Humidity... 5% to 93%, non-condensing Other Features Real Time Clock... Supported Certifications/Compliance ISO/IEC 7816, ISO/IEC 14443, qpboc Level 1, qpboc Level 2, Telecom Equipment Access to Network License, UnionPay Terminal Product Access to Network License, UnionPay Card Offline Transaction Terminal Supported Operating Systems Windows XP, Windows 7, Windows 8.1, Windows 10, Linux, Android Page 8 of 9
Page 9 of 9