Section Low Profile Micro- product selection guide Connector height is a priority for miniaturized electronics modules. These GMSM connectors are shorter and occupy less board real estate than comparable two row Micro- connectors. Solder Cup, Pre-wired and PC Versions feature gold-plated TwistPin contacts, machined aluminum shells, and are fully potted with epoxy. The glass-filled thermoplastic LCP trays will withstand soldering heat without damage. Eight Contact Arrangements Choose from to 3 contacts. Available in a variety of finishes, the socket connectors are fitted with luorosilicone interfacial seals. GMSM Solder Cup Connectors Nonremovable solder cup contacts for termination to #2 AWG or smaller wire,.00" contact spacing, eight layouts from to 3 contacts. Solder Cup Connectors Page -2 GMSM Pre-Wired Pigtails Crimp contacts are terminated to insulated Teflon wire. Connectors are backpotted with epoxy, providing strain relief and environmental protection. Insulated Wire Pigtails Page -3 GMSM with Solid Uninsulated Wire Gold-plated or solder-dipped solid copper wire, crimp termination, backpotted with epoxy. Can be terminated to flexible circuits. Solid Wire Pigtails Page -3 GMSM RIght Angle Printed Circuit oard.07 inch by.0 inch terminal spacing, for thru-hole rigid or flexible circuits. One piece threaded inserts provide a ground path from the jackpost to the board. Right Angle PC Page - 11 Glenair, Inc. U.S. CAGE Code 032 GLENAIR, INC. 1211 AIR WAY GLENALE, CA 911-297 818-27-000 AX 818-00-9912-1
Micro- GMSM Low Profile Solder Cup and Pre-Wired Connectors GMSM Connectors offer mil spec design and performance in a smaller form factor. These GMSM single row connectors are reduced in height compared to two-row Micro- connectors. GMSM Connectors feature gold plated TwistPin contacts, machined aluminum shells, and are fully potted with epoxy. Choose from to 3 contacts. Available in a variety of finishes, socket connectors are fitted with luorosilicone interfacial seals. how to ORER GMSM SOLER CUP CONNECTORS Series Shell inish Number of Contacts Contact Termination Hardware Solder Cup GMSM 1 Cadmium 2 Nickel lack Anodize Gold Chem ilm Stainless Steel Shell 3 Passivated 1 2 3 P Pin S Socket S Solder Cup P M M1 S S1 L K R Sample Part Number GMSM 1 1 P S MICRO- MOUNTING HARWARE P M M1 S S1 L K R Thru-Hole Order Hardware Separately Jackpost Includes Nut and Washer Hex Head E-ring Hex Head E-ring Extended Slot Head E-ring Slot Head E-ring Extended Hex Head Non- Slot Head Non- Extended loat Mount or ront Panel Mounting loat Mount or Rear Panel Mounting 11 Glenair, Inc. U.S. CAGE Code 032 GLENAIR, INC. 1211 AIR WAY GLENALE, CA 911-297 818-27-000 AX 818-00-9912-2
GMSM Low Profile Solder Cup and Pre-Wired Connectors Micro- how to order GMSM connectors WITH INSULATE WIRE PIGTAILS Insulated Wire Pigtails Series GMSM Shell inish 1 Cadmium 2 Nickel lack Anodize Gold Chem ilm Stainless Steel Shell 3 Passivated Number of Contacts 1 2 3 Contact P Pin S Socket Wire Gage (AWG) Wire Wire Color #2 #2 8 #28 K M2279/11 00 Vrms Teflon (TE) J M2279/33 00 Vrms Modified Cross-Linked Tefzel (ETE) E NEMA HP3-E 00 Vrms E M1878/ (TE) Sample Part Number 1 White 2 Yellow Color-Coded Stripes Per MIL-ST-81 7 Ten Color Repeating Wire Length Inches 18 Wire Length In Inches. 18 Specifies 18 Inches. GMSM 2 P K 1 18 Hardware P M M1 S S1 L K R how to order GMSM CONNECTORS WITH UNINSULATE SOLI LEAS Gold Plated or Solder ipped Solid Leads Series Shell inish Number of Contacts Contact Wire Gage (AWG) Wire Wire inish Wire Length Inches Hardware GMSM 1 Cadmium 2 Nickel lack Anodize Gold Chem ilm Stainless Steel Shell 3 Passivated 1 2 3 P Pin S Socket #2 #2 #2 C Copper Wire Sample Part Number 3 Solder ipped (3/37 Tin/Lead) Gold Plated.12..37.00.70 1.000 2.000 Wire Length In Inches..00 Specifies Half Inch. GMSM 2 P C. P P M M1 S S1 L K R 11 Glenair, Inc. U.S. CAGE Code 032 GLENAIR, INC. 1211 AIR WAY GLENALE, CA 911-297 818-27-000 AX 818-00-9912-3
Micro- GMSM Low Profile Solder Cup and Pre-Wired Connectors A C 0.083 (2.11) NOM..19 (.9) MAX..122 ±.002 (3. ± 0.0) E 0.177(.) RE. G J 2 x Mounting Holes ø. 088/.09 (2.2/2.39).098(2.)Max INSULATE WIRE LENGTH +1.00/-0.00 (+2./-0.00) 0.083 (2.11) NOM..19 (.9) MAX. H UNINSULATE WIRE LENGTH ± 0.0 (0.7) Pin 1 Socket 1 ace View of Pin (Plug) Connector ace View of Socket (Receptacle) Connector Layout dimensions A Max. C Max. Max. E Max. Max. G Max. H Max. J Max. ±.003 ± 0.08 P.8 1..78 12.11..37.13 3.2.218..01 1.03.38 9..9 7.8.18.7 S.8 1..78 12.11.9 7.8.19.9.218..012 0..370 9.0.9 7.8.197.00 P.78 19.00.78 1.. 8.91.13 3.2.218..01 1.03.38 9..09.0.18.7 S.78 19.00.78 1..09.0.19.9.218..012 0..370 9.0.09.0.197.00 P.98 2.07.777 19.73.0 13.99.13 3.2.218..01 1.03.38 9..09 1.7.18.7 S.98 2.07.777 19.73.09 1.7.19.9.218..012 0..370 9.0.09 1.7.197.00 1P 1.198.2 1.027 2.08.800.3.13 3.2.218..01 1.03.38 9..89 21.82.18.7 1S 1.198.2 1.027 2.08.89 21.82.19.9.218..012 0..370 9.0.89 21.82.197.00 P 1.8 3.77 1.277 32.3 1.00 2.9.13 3.2.218..01 1.03.38 9. 1.9 28.17.18.7 S 1.8 3.77 1.277 32.3 1.9 28.17.19.9.218..012 0..370 9.0 1.9 28.17.197.00 2P 1.98 3.12 1.27 38.78 1.0 33.0.13 3.2.218..01 1.03.38 9. 1.39 3.2.18.7 2S 1.98 3.12 1.27 38.78 1.39 3.2.19.9.218..012 0..370 9.0 1.39 3.2.197.00 P 1.98 9.7 1.777.13 1.0 39.39.13 3.2.218..01 1.03.38 9. 1.09 0.87.18.7 S 1.98 9.7 1.777.13 1.09 0.87.19.9.218..012 0..370 9.0 1.09 0.87.197.00 3P 2.198.82 2.027 1.8 1.800.7.13 3.2.218..01 1.03.38 9. 1.89 7.22.18.7 3S 2.198.82 2.027 1.8 1.89 7.22.19.9.218..012 0..370 9.0 1.89 7.22.197.00 11 Glenair, Inc. U.S. CAGE Code 032 GLENAIR, INC. 1211 AIR WAY GLENALE, CA 911-297 818-27-000 AX 818-00-9912 -
GMSM Low Profile Solder Cup and Pre-Wired Connectors Micro- Series GMSM Shell inish 1 Cadmium 2 Nickel lack Anodize Gold Chem ilm Stainless Steel Shell 3 Passivated Low Profile GMSM Micro Connectors offer mil spec design and performance in a smaller form factor for space savings. These GMSM connectors are shorter and occupy less board real estate than comparable two row Micro- connectors. GMSM Connectors feature gold-plated TwistPin contacts, machined aluminum shells, and are fully potted with epoxy. Choose from to 3 contacts. Available in a variety of finishes, socket connectors are fitted with luorosilicone interfacial seals. how to order GMSM Right angle pcb connectors Number of Contacts 1 2 3 Contact P Pin S Socket Termination Style CR Right Angle PC Hardware Option NU Threaded Insert Only, No Jackposts SU Jackpost and Threaded Insert Rear Panel Jackposts With Threaded Inserts TU 0.09" (2.) Panel VU 0.02" (1.) Panel WU 0.07" (1.2) Panel XU 0.031" (0.8) Panel YU 0.023" (0.) Panel Tail Length 1.9 (2.8) 2.10 (3.8) 3.190 (.8). (.3) Sample Part Number GMSM 2 P CR SU 1 gmsm printed circuit board mounting hardware NU SU TU,VU,WU,XU,YU No Jackpost, Threaded Insert In PC Mounting Hole Jackpost With Threaded Insert Jackpost for Rear Panel Mounting 11 Glenair, Inc. U.S. CAGE Code 032 GLENAIR, INC. 1211 AIR WAY GLENALE, CA 911-297 818-27-000 AX 818-00-9912 -
Micro- GMSM Low Profile Right Angle Printed Circuit oard Connectors A E.081.080 ±.0 (2.0 ±0.03) C E.1 ±.00 (3. ± 0.13) TAIL LENGTH ±.01 (0.38).122 (3.) RE..0 ( 0.1) iameter Pin 1 ace View of Pin (Plug) Connector J G L K #2- UNC 2 THS. 2 PLCS. RAIUS Socket 1 ace View of Socket (Receptacle) Connector Layout dimensions A Max. C Max. Max. E Max. G Max. J Max. K L ±.003 ± 0.08 P.8 1..78 12.11..37.13 3.2.21.13.3 9.2.18.7..3.213.1 S.8 1..78 12.11.9 7.8.19.9.21.13.3 9.2.197.00..3.213.1 P.78 19.00.78 1.. 8.91.13 3.2.21.13.3 9.2.18.7..3.213.1 S.78 19.00.78 1..09.0.19.9.21.13.3 9.2.197.00..3.213.1 P.98 2.07.777 19.73.0 13.99.13 3.2.21.13.3 9.2.18.7..3.213.1 S.98 2.07.777 19.73.09 1.7.19.9.21.13.3 9.2.197.00..3.213.1 1P 1.198.2 1.027 2.08.800.3.13 3.2.21.13.3 9.2.18.7..3.213.1 1S 1.198.2 1.027 2.08.89 21.82.19.9.21.13.3 9.2.197.00..3.213.1 P 1.8 3.77 1.277 32.3 1.00 2.9.13 3.2.21.13.3 9.2.18.7..3.213.1 S 1.8 3.77 1.277 32.3 1.9 28.17.19.9.21.13.3 9.2.197.00..3.213.1 2P 1.98 3.12 1.27 38.78 1.0 33.0.13 3.2.21.13.3 9.2.18.7..3.213.1 2S 1.98 3.12 1.27 38.78 1.39 3.2.19.9.21.13.3 9.2.197.00..3.213.1 P 1.98 9.7 1.777.13 1.0 39.39.13 3.2.21.13.3 9.2.18.7..3.213.1 S 1.98 9.7 1.777.13 1.09 0.87.19.9.21.13.3 9.2.197.00..3.213.1 3P 2.198.82 2.027 1.8 1.800.7.13 3.2.21.13.3 9.2.18.7..3.213.1 3S 2.198.82 2.027 1.8 1.89 7.22.19.9.21.13.3 9.2.197.00..3.213.1 ±.00 ± 0. ±.0 ± 0.2 11 Glenair, Inc. U.S. CAGE Code 032 GLENAIR, INC. 1211 AIR WAY GLENALE, CA 911-297 818-27-000 AX 818-00-9912 -
GMSM Low Profile Right Angle Printed Circuit oard Connectors Micro- GMsm pcb layouts pin connectors 3 1 2.78 (12.11) Pin 9 7 3 1 8 2.777 (19.73) Pin 3 1 2.78 (1.) Pin 1 12 8 2 1 13 11 9 7 3 1 1.027 (2.08) 1 Pin 19 17 1 13 11 9 18 1 1 12 1.277 (32.3) Pin 8 7 3 2 1. (.3) 2 22 18 1 1 12 2 23 21 19 17 1 13 11 9 1.27 (38.78 2 Pin 8 7 3 2 1 29 27 2 23 21 19 17 1 13 11 9 28 2 2 22 18 1 1 12 1.777 (.13) Pin 8 7 3 2 1 3 32 28 2 2 22 18 1 1 12 3 33 31 29 27 2 23 21 19 17 1 13 11 9 2.027 (1.8) 3 Pin 8 7 3 2 1 11 Glenair, Inc. U.S. CAGE Code 032 GLENAIR, INC. 1211 AIR WAY GLENALE, CA 911-297 818-27-000 AX 818-00-9912-7
Micro- GMSM Low Profile Right Angle Printed Circuit oard Connectors GMsm pcb layouts socket connectors 2 1 3.78 (12.11) Pin 2 8 Pin 1 3 7 9.777 (19.73) 2 1 3.78 (1.) Pin 2 8 12 1 1 3 7 9 11 13 1 1.027 (2.08) 1 Pin 2 8 12 1 1 18 1 3 7 9 11 13 1 17 19 1.277 (32.3) Pin. (.3) 2 8 12 1 1 18 22 2 1 3 7 9 11 13 1 17 19 21 23 2 1.27 (38.78 2 Pin 2 8 1 3 12 1 7 9 11 13 1 1 1.777 (.13) Pin 18 17 19 22 2 2 21 23 2 28 27 29 2 8 1 3 12 1 7 9 11 13 1 1 18 17 19 2.027 (1.8) 3 Pin 22 2 2 21 23 2 28 27 29 31 32 3 33 3 11 Glenair, Inc. U.S. CAGE Code 032 GLENAIR, INC. 1211 AIR WAY GLENALE, CA 911-297 818-27-000 AX 818-00-9912-8