Starters Manual Motor Low Voltage Starters 600, 609, 609U, 609TU Compact design Undervoltage protection Manual operation with overload protection Ideal for low HP applications, up to 10 HP three phase Manual motor starters are specifically designed for full voltage motor starting applications where remote push button control is not necessary. They are ideally suited for starting and protecting smaller motors frequently used for fans and blowers. 600 Manual Starting Switches 609 Manual Starting Switches Single phase Starting and overload protection of small AC/DC motors up to 1 Hp Single and three phase Contact position indicator Locking feature Reversing and 2-speed Wide range of enclosures, including hazardous location 609U & 609TU Manual Starting Switches Undervoltage protection Single and three phase Contact position indicator Locking feature Wide range of enclosures Push button or toggle switch
Product Selection 600 Manual Motor Starters Type Toggle No. of Poles Open Type Without Enclosure Includes Legend Plate Switch Only Type 1 General Purpose Enclosure Surface Mount Type 1 General Purpose Enclosure Flush Mount Includes Flush Plate Only 1 600-TOX4 600-TAX4 600-TQX4 2 600-TOX5 600-TAX5 600-TQX5 Key 2 600-TOX49 600-TAX49 600-TQX49 Lever 1 600-TOX149 600-TAX149 Toggle Switch with Neon Pilot Light (115 or 230V) 1 600-TOX216 600-TAX216 600-TQX216 2 600-TOX109 600-TAX109 600-TQX109 Key 2 600-TOX110 600-TAX110 600-TQX110 Switch and Hand-Off-Auto Selector Switch (for use on AC only) Toggle 2 600-TAX9 600-TQX9 Switch with Neon Pilot Light and Hand-Off-Auto Selector Switch (115 or 230V, AC only) Toggle 2 600-TAX142 600-TQX142 Key 2 600-TAX145 609 Manual Motor Starters Max. Hp Rating Motor Voltage, 60 Hz Open Type without Enclosure Type 1 General Purpose Enclosure Surface Mount Type Phase Size 115V 200V 230V 460 575V 0 1 2 609-AOX 609-AAX Push Button Toggle Lever 1 3 1 3 1 2 3 609-BOX 609-BAX 1 P 3 5 609-XOX 609-XAX 0 3 3 5 609-AOW 609-AAW 1 7-1/2 7-1/2 10 609-BOW 609-BAW 0 1 2 609T-AOX 609T-AAX 1 2 3 609T-BOX 609T-BAX 1 P 3 5 609T-XOX 609T-XAX 0 3 3 5 609T-AOW 609T-AAW 1 7-1/2 7-1/2 10 609T-BOW 609T-BAW Heater Elements All single-phase starters require one heater element and three-phase starters require three heater elements. Product selection for 609U & 609TU is available at http://ab.rockwellautomation.com/motor-control/nema-manual-motor-starter
Starters IEC Eco Starters 190E/191E Meets UL/CSA IEC standards 5 23 A Type 1 and 2 coordination AC or DC coils available Shares common accessories with 100-C/100-K contactors and 140M motor protection circuit breakers The 190E/191E motor controllers can be used in a variety of applications. These starters can be used in a group motor application or as a stand-alone product without any additional short-circuit protection in the motor branch circuits. Rated Type F combination motor controllers (UL/CSA). Options for Field Assembly 190/191-E starters can be field assembled. Simply select the following: 100-K/104-K miniature contactor (page 1-28 or 100-C/104-C contactor (page 1-29) 140M motor protection circuit breaker (page 1-3) Eco connecting module (catalog number 140M-C-PEK12, 140M-C-PEC23) 140M Motor Protection Circuit Breaker Eco Connecting Module 100-C Contactor Reversing 104-K Reversing Miniature Contactor Direct on Line
Product Selection IEC Eco Starters with AC and DC-Operated Contactors Motor Current Adjustment Range [A] 3-Phase kw (50 Hz) 3-Phase Hp (60 Hz) Max. Short- Circuit Current Type 1 Coordination [ka] 400/415V 460V 480Y/277V With 100-K IEC Miniature Contactors Direct on Line Reversing With 100-C IEC Contactors Direct on Line Reversing 0.10 0.16 0.02 65 190E-KMN 2-CA16X 191E-KMN 1-CA16X 190E-AN 2-CA16X 191E-AN 3-CA16X 0.16 0.25 0.06 65 190E-KMN 2-CA25X 191E-KMN 1-CA25X 190E-AN 2-CA25X 191E-AN 3-CA25X 0.25 0.40 0.09 65 190E-KMN 2-CA40X 191E-KMN 1-CA40X 190E-AN 2-CA40X 191E-AN 3-CA40X 0.40 0.63 0.12 0.18 65 190E-KMN 2-CA63X 191E-KMN 1-CA63X 190E-AN 2-CA63X 191E-AN 3-CA63X 0.63 1.00 0.25 0.5 65 190E-KMN 2-CB10X 191E-KMN 1-CB10X 190E-AN 2-CB10X 191E-AN 3-CB10X 1.00 1.60 0.37 0.55 0.5 1 65 190E-KMN 2-CB16X 191E-KMN 1-CB16X 190E-AN 2-CB16X 191E-AN 3-CB16X 1.60 2.50 0.75 0.75 1.5 65 190E-KMN 2-CB25X 191E-KMN 1-CB25X 190E-AN 2-CB25X 191E-AN 3-CB25X 2.50 4.00 1.1 1.5 1.5 3 65 190E-KMN 2-CB40X 191E-KMN 1-CB40X 190E-AN 2-CB40X 191E-AN 3-CB40X 4.00 6.30 2.2 3 5 65 190E-KNN 2-CB63X 191E-KNN 1-CB63X 190E-AN 2-CB63X 191E-AN 3-CB63X 6.30 10.0 3.0 4.0 5 7.5 65 190E-KPN 2-CC10X 191E-KPN 1-CC10X 190E-BN 2-CC10X 191E-BN 3-CC10X 10.0 11.0 5.5 7.5 30 190E-KPN 2-CC16X 191E-KPN 1-CC16X 10.0 12.0 4.0 5.5 7.5 30 190E-BN 2-CC16X 191E-BN 3-CC16X 10.0 16.0 5.5 6.3 7.5 10.0 30 190E-CN 2-CC16X 191E-CN 3-CC16X The catalog number as listed is incomplete. Select a coil voltage code from the table below. Coil Voltage s for AC and DC Control AC Control 24V DC Control KJ 24V, 50/60 Hz ZJ Standard (190E/191E-K) D 110V, 50 Hz/120V, 60 Hz Integrated diode DJ (190E/191E-K) KF 230V, 50/60 Hz Electronic with KA 240V, 50/60 Hz EJ integrated diode (190/191E-A...D) Product Selection Tools Available online or for download, our tools help you access info while in the office or on the go. www.rockwellautomation.com/support/ selection.page
Starters Enclosed Starters, IEC 109-C/105-C 109-C Direct On-line, Non-combination Starters 100-C Contactor Electronic motor protection Disconnecting means to be provided separately Factory modifications available 105-C Reversing, Non-combination Starters 104-C reversing contactor Electronic motor protection Disconnecting means provided separately Factory modifications available Compact Installation Plastic enclosures provide a compact, cost effective solution to help reduce machine space and expand product flexibility. Wiring Made Easy Metal enclosures now feature component wiring color-coded by function. The wiring sleeve-cover corresponds to a colored label on the terminal block, reducing wiring errors and allowing for quicker installation times. 100-C Contactor Auxiliary Sensor Control Command Pluggable terminal block E1 Plus Electronic Overload Relay Indication Color-coded sleeves
Product Selection IEC Enclosed Starters Type Direct on Line Starter 109-C Reversing 105-C Ratings AC-3 E1 Plus Overload Relay IP66, Large Molded Plastic IP42, Type 1 Metal IP66, Large Molded Plastic IP42, Type 1 Metal Max I e Standard Motors AC-3, 3 Motor Current Setting Range With START/STOP Multifunction Push Button (2 Functions) and Reset With QC Wiring Technology With FORWARD/OFF/REVERSE Multifunction Push Button (3 Functions) and Reset With QC Wiring Technology [A] [kw] [A] 9 4 1.0 5.0 109-C09L(X)E1C-1M-7 109-C09AD-XXX 105-C09L(X)E1C-1M-7 105-C09AD-XXX 9 4 3.2 16.0 109-C09L(X)E1D-1M-7 109-C09AD-XXX 105-C09L(X)E1D-1M-7 105-C09AD-XXX 12 5.5 3.2 16.0 109-C12L(X)E1D-1M-7 109-C12AD-XXX 105-C12L(X)E1D-1M-7 105-C12AD-XXX 16 7.5 3.2 16.0 109-C16L(X)E1D-1M-7 109-C16AD-XXX 105-C16L(X)E1D-1M-7 105-C16AD-XXX 23 11 5.4 27.0 109-C23L(X)E1E-1M-7 109-C23AD-XXX 105-C23L(X)E1E-1M-7 105-C23AD-XXX 30 15 9.0 45.0 109-C30L(X)E1F-1M-7 109-C30AD-XXX 105-C30AD-XXX 37 18.5 9.0 45.0 109-C37L(X)E1F-1M-7 109-C37AD-XXX 105-C37AD-XXX 43 22 9.0 45.0 109-C43L(X)E1F-1M-7 109-C43AD-XXX 105-C43AD-XXX Accessories E1 Plus DeviceNet and protection module E1 Plus EtherNet/IP and protection module E1 Plus jam protection module E1 Plus ground fault module E1 Plus ground fault/jam module E1 Plus PTC module E1 Plus remote reset module 193-EDN 193-ETN 193-EJM 193-EGF 193-EGJ 193-EPT 193-ERR Need Help? The Rockwell Automation Support Center is your 24/7 support for the answers you need now. www.rockwellautomation.com/ support/overview.page Coil Voltage s for AC and DC Control KJ D KF KA AC Control 24V, 50/60 Hz 110V, 50 Hz/120V, 60 Hz 230V, 50/60 Hz 240V, 50/60 Hz DC Control with Integrated Surge Suppression DJ 24V (60...97 A only) EJ 24V, Electronic (9 55 A only) ED 110V, Electronic (9...55 A only)