Cisco Stand-Alone Installation Instructions Windows OS IBM s statements regarding its plans, directions, and intent are subject to change or withdrawal without notice at IBM s sole discretion. Information regarding potential future products is intended to outline our general product direction and it should not be relied on in making a purchasing decision. The information mentioned regarding potential future products is not a commitment, promise, or legal obligation to deliver any material, code or functionality. Information about potential future products may not be incorporated into any contract. The development, release, and timing of any future features or functionality described for our products remains at our sole discretion.
In order to access the IBM Early Programs Cloud, a Virtual Private Network (VPN) connection is required to connect through the IBM network to the specific Cloud environment. This is performed using the provided Cisco AnyConnect VPN Client software. Here are Steps: 1. Download the provided Cisco AnyConnect VPN Client software Zip file (anyconnect-win-3.1.05152- pre-deploy-k9.zip) to your computer. 2. Extract the Zip file by right-clicking the file and selecting Extract All June 2, 2014 Version 3 Page 2
3. Click Extract Installing Cisco AnyConnect Stand-Alone Client for Windows OS 4. Open the anyconnect-win-3.1.05152-pre-deploy-k9 folder 5. Double-Click the installer package file anyconnect-win-3.1.05152-pre-deploy-k9.msi to begin the install. 6. Click Next June 2, 2014 Version 3 Page 3
7. Accept the License Agreement 8. Click Install June 2, 2014 Version 3 Page 4
9. Once the installation completes click Finish 10. Once you have received your Early Program Cloud Login Credentials launch the program from the Start Menu -> Cisco -> Cisco AnyConnect Secure Mobility Client -> Cisco AnyConnect Secure Mobility Client location. June 2, 2014 Version 3 Page 5
11. Click the Advanced Settings icon 12. Verify the Block connections to untrusted servers box is unchecked. If the box is checked, uncheck the box. Close the Advanced Settings window. Note: If you would like the Cisco VPN application to not minimize itself to the taskbar once connected uncheck the Minimize AnyConnect on VPN connect June 2, 2014 Version 3 Page 6
13. In the Ready to connect text box enter this text asa003b.centers.ihost.com Note: If your DNS does not recognize asa003b.centers.ihost.com enter the IP of the VPN appliance in the Ready to connect text box 32.97.185.16. When using the IP instead of the hostname you will receive a message stating AnyConnect cannot verify the VPN server: 32.97.185.16. This occurs because the Server Certificate uses the hostname instead of the IP. Click the Connect Anyway button to initiate the connection. 14. Click Connect to initiate the connection to the Cisco VPN June 2, 2014 Version 3 Page 7
15. Once the connection is established, choose the correct Group: a. If you are participating in a Managed Early Program select SWG_EP_Cloud b. If you are participating in a Open Early Program select SWG_Open_EP_Cloud 16. Type in the provided Early Program Cloud Username and Early Program Cloud Password that you received through e-mail. 17. Press OK 18. After the Welcome to SWG EP Cloud message appears, press the Accept button. 19. When you are finished, return to the Cisco AnyConnect VPN Client and press the Disconnect button. June 2, 2014 Version 3 Page 8