Backup using Quantum vmpro with Symantec Backup Exec release 2012
|
|
- Silvester Fox
- 5 years ago
- Views:
Transcription
1 Backup using Quantum vmpro with Symantec Backup Exec release 2012 Step 1) If the vmpro appliance name and IP address are not resolved through DNS, update the Windows hosts file to include the IP address and host name of the appliance: Step 2) On the Windows server running the Backup Exec server, create an account with the same name and password as used for the vmpro server. Typically this is the "sysadmin" account. Make the account a member of Local Administrator's or Domain Admin group. The account allows access to the vmpro "/export" filesystem without providing a username and password each time. To create a new user in a computer not joined to Active Directory, select Computer Management > Local Users and Groups > Users. Right-click Users and then select New User.
2 To create a new user in an Active Directory environment, from the domain controller, select Active Directory Users and Computers > Users. Right-click Users and then select New > User.
3 Step 3) Open tcp port 135 in the firewall on the vmpro appliance. To do this, run the following command from the appliance s console: reg set iptables.ports.backupexec Step 4) Start the Symantec Backup Exec 2012 GUI. Select the big yellow button on the top left corner of the GUI, and then select Configuration and Settings > Backup Exec Settings.
4 Step 5) From the Settings screen, select Network and Security, and then select Enable selection of user shares. Step 6) Select the Backup and Restore tab, and then select the Add icon to add a vmpro host.
5 Step 7) From the Add a Server screen, select File Server, and then click Next. Step 8) In the Do you want to establish a trust? screen, select Allow Backup Exec to establish a trust with the servers., and then click Next.
6 Step 9) In the Which servers do you want to add? screen, enter the hostname or IP address of the vmpro appliance. Click Add, and then click Next. Step 10) In the Which logon account do you want to use? Screen, click Add/Edit. Step 11) In the Select a logon account to use when connecting to this server, click Add. Step 12) In the Add Logon Credentials screen, enter the username and password created in Step 2. Uncheck This is a restricted logon account., and then click OK. Step 13) In the Logon Account Selection screen, select the account just created, and click OK. In the next screen, click Finish. The Inserting resource container... screen will display. After a short time, the vmpro appliance host will be added to the Servers list.
7 Step 14) In the Backup and Restore tab, right click the vmpro host just added, and then select Backup > Backup Up to Disk or any other appropriate backup type. Step 15) In the Backup Properties screen, after some resources are shown on the left pane, click Edit. Step 16) From the Backup Selections screen, select export, and then click OK.
8 Step 17) The left pane of the Backup Properties screen will now show either Fully selected or Partially selected for export filesystem depending on whether you selected all or a subset of export for backup. Click Edit on the right side of the pane to edit the backup schedule, level, etc...
9 Step 18) In the Backup Options screen, setup the backup Schedule, Storage, etc.. as appropriate, but be sure to disable (uncheck) Use snapshot technology by selecting Advanced Open File. Step 19) While still in the Backup Options screen, select Files and Folders and for Backup method for files: select By modified time and Back up open files: select With a lock.
10 Step 20) To run the backup job now, select Schedule. In the Recurrence drop-down, select Run initial full backup now in addition to the selected schedule, and then click OK. Step 21) Click OK again in the Backup Properties window, and the job will run. Otherwise ignore step 19 and click OK to save and exit. The job will run at the scheduled time.
11 Step 22) If the backup job is started now, you can view the backup s progress by right clicking the job and then selecting View Job Activity. The Job Activity screen displays.
12 Click Close when you no longer want to monitor the backup s progress.
Using Symantec Backup Exec 2012 v1.2
Using Symantec Backup Exec 2012 v1.2 to backup and restore via CIFS and NDMP Table of Contents What is NDMP?... 4 NDMP and FlashNAS... 4 Before You Start... 5 Installing Symantec BackupExec... 5 Backing
More informationConfigure SharePoint Server 2010 as a single server with the Unitrends appliance. farm with the Unitrends appliance
Configure SharePoint Server 2010 as a single server with the Unitrends appliance I. Configure SharePoint single server 1. Logon to the server with an account that has local administrator credentials 2.
More informationWMI log collection using a non-admin domain user
WMI log collection using a non-admin domain user To collect WMI logs from a domain controller in EventLog Analyer, it is necessary to add a domain admin account of that domain in it. Alternatively, you
More informationIS L02-MIGRATING TO SEP 12.1
IS L02-MIGRATING TO SEP 12.1 Description Migrating to Symantec Endpoint Protection (SEP)? Want to upgrade to the latest SEP technology? In this Lab, see how to upgrade a multi-site Symantec Endpoint Protection
More informationNetBackup & Backup Exec OST Configuration Guide Instructions
NetBackup & Backup Exec OST Configuration Guide Instructions This document contains the following topics: Introduction 2 Installing the License Key and OST Plug-in 3 Configuring the DXi 5 Configuring Veritas
More informationPigCHAMP Knowledge Software. Enterprise Edition Installation Guide
PigCHAMP Knowledge Software Enterprise Edition Installation Guide PIGCHAMP, LLC Enterprise Edition Installation Guide JUNE 2016 EDITION PigCHAMP Knowledge Software 1531 Airport Rd Suite 101 Ames, IA 50010
More informationBackup and Restore. About Backup and Restore
About, page 1 Back Up DNA Center, page 2 Restore DNA Center, page 4 Schedule a Backup, page 5 About The backup and restore procedures for DNA Center can be used for the following purposes: To create backup
More informationConfiguring the SMA 500v Virtual Appliance
Using the SMA 500v Virtual Appliance Configuring the SMA 500v Virtual Appliance Registering Your Appliance Using the 30-day Trial Version Upgrading Your Appliance Configuring the SMA 500v Virtual Appliance
More information29 March 2017 SECURITY SERVER INSTALLATION GUIDE
29 March 2017 SECURITY SERVER INSTALLATION GUIDE Contents 1. Introduction... 2 1.1 Assumptions... 2 1.2 Prerequisites... 2 2. Required setups prior the Security Server Installation... 3 1.1 Create domain
More informationNetBackup & Backup Exec OST Configuration Guide Instructions
NetBackup & Backup Exec OST Configuration Guide Instructions This document contains the following topics: Introduction 2 Installing the License Key and OST Plug-in 2 Configuring the DXi 6 Configuring Veritas
More informationUP L12: Still on SEP 11? Let us show you how to simplify migration to SEP.
UP L12: Still on SEP 11? Let us show you how to simplify migration to SEP. Description Migrating to Symantec Endpoint Protection (SEP)? Want to upgrade to the latest SEP technology? In this Lab, see how
More informationConfiguring Administrative Operations
This section includes the following topics: Administrative Operation Conventions, page 1 Managing Backup Operations, page 1 Restoring a Backup Configuration, page 6 Managing Export Operations, page 10
More informationNew Dropbox Users (don t have a Dropbox account set up with your Exeter account)
The setup process will determine if you already have a Dropbox account associated with an Exeter email address, and if so, you'll be given a choice to move those contents to your Phillips Exeter Dropbox
More informationMigration of Cisco Physical Access Manager to the Identiv Connected Physical Access Manager
Migration of Cisco Physical Access Manager to the Identiv Connected Physical Access Manager The following upgrade path from Cisco Physical Access Manager (CPAM) to Identiv Connected Physical Access Manager
More informationUsing Servosity PRO/STD to Restore Your Files. This chapter describes different ways files can be restored from the backup server.
Using Servosity PRO/STD to Restore Your Files This chapter describes different ways files can be restored from the backup server. 1.1 Restore backup files directly from the backup server. You can use either
More informationUser Inputs for Installation
APPENDIXA This appendix provides information on the user inputs during LMS 4.1 installation. Note For information on the Installation of LMS 4.1, see Performing Installation of LMS 4.1. This appendix contains:
More informationConfiguring Administrative Operations
Configuring Administrative Operations This section includes the following topics: Administrative Operation Conventions, page 1 Configuring Backup Operations, page 1 Restoring a Backup Configuration, page
More informationManaging GSS Devices from the GUI
CHAPTER 1 This chapter describes how to configure and manage your Global Site Selector Manager (GSSM) and Global Site Selector (GSS) devices from the primary GSSM graphical user interface. It includes
More informationSetting up the DR Series System on Acronis Backup & Recovery v11.5. Technical White Paper
Setting up the DR Series System on Acronis Backup & Recovery v11.5 Technical White Paper Quest Engineering November 2017 2017 Quest Software Inc. ALL RIGHTS RESERVED. THIS WHITE PAPER IS FOR INFORMATIONAL
More informationParallels Remote Application Server
Parallels Remote Application Server Parallels Client for Mac User's Guide v16 Parallels International GmbH Vordergasse 59 8200 Schaffhausen Switzerland Tel: + 41 52 672 20 30 www.parallels.com Copyright
More informationLiveNX Upgrade Guide 8.0.x to 8.1.x
LIVEACTION, INC. LiveNX Upgrade Guide 8.0.x to 8.1.x UPGRADE LiveAction, Inc. 3500 Copyright WEST BAYSHORE 2016 LiveAction, ROAD Inc. All rights reserved. LiveAction, LiveNX, LiveUX, the LiveAction Logo
More informationHP Service Health Reporter
HP Service Health Reporter Versions 9.30 & 9.31 Report Scheduling Table of contents Overview... 2 Scheduling... 2 Type of Scheduling... 2 How to schedule?... 2 Schedule Parameters... 2 Report (instance)
More informationSetting Up the DR Series System as an NFS Target on Amanda Enterprise 3.3.5
Setting Up the DR Series System as an NFS Target on Amanda Enterprise 3.3.5 Dell Engineering November 2016 A Quest Technical White Paper Revisions Date June 2015 November 2016 Description Initial release
More informationedp 8.2 Info Sheet - Integrating the ediscovery Platform 8.2 & Enterprise Vault
edp 8.2 Info Sheet - Integrating the ediscovery Platform 8.2 & Enterprise Vault 12.0.1 Date: December 2017 Author: Technical Field Enablement (II-TEC@veritas.com) Applies to: ediscovery Platform 8.x and
More informationGSS Administration and Troubleshooting
CHAPTER 9 GSS Administration and Troubleshooting This chapter covers the procedures necessary to properly manage and maintain your GSSM and GSS devices, including login security, software upgrades, GSSM
More informationInstruction manual. Swap-Automate. Oracle Cloud Backup and Restore Manager. This instruction manual describes how to use
Instruction manual Swap-Automate Oracle Cloud Backup and Restore Manager This instruction manual describes how to use the Swap-Automate Oracle Cloud Backup and Restore manager application. Version 1.1
More informationConfiguration Note. AudioCodes One Voice for Microsoft Skype for Business. CloudBond 365. Backup and Restore Functionality. Version 9.
7 Configuration Note AudioCodes One Voice for Microsoft Skype for Business CloudBond 365 Backup and Restore Functionality Version 9.5 Update 4 Configuration Note Contents Table of Contents 1 Introduction...
More informationJoining a workstation to the agnet.tamu.edu Domain and Profile Migration
Joining a workstation to the agnet.tamu.edu Domain and Profile Migration Contents Migration Prerequisites... 1 Firewalls... 1 Run As and Other Alternate Credentialing Methods... 1 File and Print Sharing
More informationNBC-IG Installation Guide. Version 7.2
Installation Guide Version 7.2 2017 Nuance Business Connect 7.2 Installation Guide Document Revision History Revision Date August 8, 2017 Revision List Updated supported SQL Server versions June 14, 2017
More informationSymantec Desktop and Laptop Option 8.0 SP2. Symantec Desktop Agent for Mac. Getting Started Guide
Symantec Desktop and Laptop Option 8.0 SP2 Symantec Desktop Agent for Mac Getting Started Guide Disclaimer The information contained in this publication is subject to change without notice. Symantec Corporation
More informationSecureGuard VMS. SecureGuard All-In-One Quick Install Guide V. 2.5
SecureGuard VMS Quick Install Guide V. 2.5 9/30/2018 2 Table of Contents Purpose... 3 Installation... 3 Setup... 4 Startup & Live View... 26 3 Purpose This is a step-by-step guide to installing the current
More informationUser Profile Central Management Center User guide User Profile Central - User guide for remote backup and restore of user profiles.
User Profile Central - User guide for remote backup and restore of user profiles. What is User Profile Central or UPC as we call it? UPC is an easy way to manage User Profiles over network. Simply put
More informationDell License Manager Version 1.2 User s Guide
Dell License Manager Version 1.2 User s Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either
More informationCloud Attached Storage
Using CTERA Appliances in Replicated Configuration Cloud Attached Storage June 2013 Version 3.2 1 Introduction This document explains how to use CTERA C series appliances in replicated configuration. In
More informationVMware AirWatch Database Migration Guide A sample procedure for migrating your AirWatch database
VMware AirWatch Database Migration Guide A sample procedure for migrating your AirWatch database For multiple versions Have documentation feedback? Submit a Documentation Feedback support ticket using
More informationAcronis Backup & Recovery 11 Beta Advanced Editions
Acronis Backup & Recovery 11 Beta Advanced Editions Quick Start Guide Table of contents 1 Main components... 3 2 Supported operating systems... 3 3 Where do I install the components?... 3 4 What you need
More informationWCM 6.0 Pro MS/SP Software Recovery Installation Guide
Release Date: 2013/09/23 WCM 6.0 Pro MS/SP Software Recovery Installation Guide Once the OS is restored or re-imaged successfully on the system, please follow below installation guide to complete all the
More informationDELL TM PowerVault TM DL Backup-to-Disk Appliance
DELL TM PowerVault TM DL Backup-to-Disk Appliance Powered by Symantec TM Backup Exec TM Configuring the Dell EqualLogic PS Series Array as a Backup Target A Dell Technical White Paper by Dell Engineering
More informationSymantec Backup Exec Quick Installation Guide
Symantec Backup Exec 2010 Quick Installation Guide 20047221 Installing Backup Exec This document includes the following topics: System requirements Before you install About the Backup Exec service account
More informationWhatsUp Gold 2016 Installation and Configuration Guide
WhatsUp Gold 2016 Installation and Configuration Guide Contents Installing and Configuring WhatsUp Gold using WhatsUp Setup 1 Installation Overview 1 Overview 1 Security considerations 2 Standard WhatsUp
More informationOASIS Mobile Installation Guide
OASIS Mobile Installation Guide Table of Contents I. Preparation... 1 A. Verify System Requirements... 1 B. Uninstall Java... 3 C. Configure Internet Explorer... 3 II. Install OASIS Mobile... 5 III. Install
More informationSymantec Encryption (PGP) Installation Guide
System Requirements Symantec Encryption (PGP) Installation Guide Windows 8 (32 and 64 bit versions) Windows 7 (32 and 64 bit versions)] Windows Vista (32- and 64-bit editions) Additional Requirements Boot
More informationConfiguring Virtual Blades
CHAPTER 14 This chapter describes how to configure virtual blades, which are computer emulators that reside in a WAE or WAVE device. A virtual blade allows you to allocate WAE system resources for use
More informationHow to create a System Logon Account in Backup Exec for Windows Servers
How to create a System Logon Account in Backup Exec for Windows Servers Problem How to create a System Logon Account in Backup Exec for Windows Servers Solution The Backup Exec System Logon Account (SLA)
More informationSetting Up the Dell DR Series System as an NFS Target on Amanda Enterprise 3.3.5
Setting Up the Dell DR Series System as an NFS Target on Amanda Enterprise 3.3.5 Dell Engineering September 2015 A Dell Technical White Paper Revisions Date June 2015 September 2015 Description Initial
More informationCDP Data Center Console User Guide CDP Data Center Console User Guide Version
CDP Data Center Console User Guide CDP Data Center Console User Guide Version 3.18.2 1 README FIRST Welcome to the R1Soft CDP Data Center Console User Guide The purpose of this manual is to provide you
More informationEMC SourceOne Discovery Manager Version 6.7
EMC SourceOne Discovery Manager Version 6.7 Installation and Administration Guide 300-012-743 REV A01 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright
More informationWindows Backup Server Installation
Windows Backup Server Installation VEMBU TECHNOLOGIES www.vembu.com TRUSTED BY OVER 60,000 BUSINESSES Windows Backup Server Installation Vembu BDR Server is currently supported for below versions of Windows
More informationThe SSID to use and the credentials required to be used are listed below for each type of account: SSID TO CREDENTIALS TO BE USED:
Installation Guides - Information required for connection to the Central Regional TAFE Kalgoorlie Campus Wireless Network Wireless Network Names and Credentials There are two wireless networks operating
More informationSecuring Containers Using a PNSC and a Cisco VSG
Securing Containers Using a PNSC and a Cisco VSG This chapter contains the following sections: About Prime Network Service Controllers, page 1 Integrating a VSG into an Application Container, page 4 About
More informationCA Agile Central Administrator Guide. CA Agile Central On-Premises
CA Agile Central Administrator Guide CA Agile Central On-Premises 2018.1 Table of Contents Overview... 3 Server Requirements...3 Browser Requirements...3 Access Help and WSAPI...4 Time Zone...5 Architectural
More informationDecember P Xerox FreeFlow Core Installation Guide
5.1.0.0 December 2017 702P06246 2017 Xerox Corporation. All rights reserved. Xerox, Xerox and Design, and FreeFlow are trademarks of Xerox Corporation in the United States and/or other countries. This
More informationXenMobile 10 Cluster installation. Here is the task that would be completed in order to implement a XenMobile 10 Cluster.
XenMobile 10 Cluster installation Here is the task that would be completed in order to implement a XenMobile 10 Cluster. For this example, running on my lab, I am using XenServer 6.5 SP1 as hypervisor
More informationMigrate Data from Cisco Secure ACS to Cisco ISE
Migrate Data from Cisco Secure ACS to Cisco ISE This chapter describes exporting and importing Cisco Secure ACS, Release 5.5 or later data into Cisco ISE, Release 2.3 system using the migration tool. Export
More informationAdding a High Availability System
Adding a HA System Using Automatic Deployment, page 1 Adding a HA System Using Manual Deployment, page 3 Confirming Your Primary System and Your HA System Are at the Same Version, page 5, page 6 Testing
More informationSecuring Containers Using a PNSC and a Cisco VSG
Securing Containers Using a PNSC and a Cisco VSG This chapter contains the following sections: About Prime Network Service Controllers, page 1 Integrating a VSG into an Application Container, page 3 About
More informationForeScout CounterACT. Configuration Guide. Version 1.2
ForeScout CounterACT Core Extensions Module: NetFlow Plugin Version 1.2 Table of Contents About NetFlow Integration... 3 How it Works... 3 Supported NetFlow Versions... 3 What to Do... 3 Requirements...
More informationVMware Identity Manager Connector Installation and Configuration (Legacy Mode)
VMware Identity Manager Connector Installation and Configuration (Legacy Mode) VMware Identity Manager This document supports the version of each product listed and supports all subsequent versions until
More informationBusinessObjects Enterprise / Crystal Reports Server XI R1 and R2
BusinessObjects Enterprise / Crystal Reports Server XI R1 and R2 Overview Contents BusinessObjects Enterprise and Crystal Reports Server XI R1 and R2 do not currently have the capability to send objects
More informationIntegrated Information Technology Services (IITS)
Integrated Information Technology Services (IITS) User Guide for Laptops with Windows 7 Network Configuration & Software Installation Version 1.4 Updated as at 15-Aug-11 Table of Contents How to verify
More informationSecurewireless Windows 7 Setup Guide
Securewireless Windows 7 Setup Guide 1. Click on the wireless icon in the lower right-hand corner of the taskbar and then click on Open Network and Sharing Center. 2. From the Network and Sharing Center
More informationUsing the Subscriber Manager GUI Tool
CHAPTER 11 Using the Subscriber Manager GUI Tool Published: December 23, 2013, Introduction This chapter describes how to use the Subscriber Manager (SM) graphical user interface (GUI) tool to configure
More informationvrealize Suite Lifecycle Manager 1.1 Installation, Upgrade, and Management vrealize Suite 2017
vrealize Suite Lifecycle Manager 1.1 Installation, Upgrade, and Management vrealize Suite 2017 You can find the most up-to-date technical documentation on the VMware website at: https://docs.vmware.com/
More informationMigrating vrealize Automation 6.2 to 7.2
Migrating vrealize Automation 6.2 to 7.2 vrealize Automation 7.2 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new edition.
More informationSBCSC Staff BYOD (bring your own device) Instructions: 08/11/2016
SBCSC Staff BYOD (bring your own device) Instructions: 08/11/2016 Teachers and staff, use these instructions to get a personal device of yours attached to the SBCSC BYOD wireless network. Once connected,
More informationVirtual Recovery Assistant user s guide
Virtual Recovery Assistant user s guide Part number: T2558-96323 Second edition: March 2009 Copyright 2009 Hewlett-Packard Development Company, L.P. Hewlett-Packard Company makes no warranty of any kind
More informationInstallation Guide. Tandberg Data DPS1000 Series Model: DPS1100 and DPS1200, Release: 1.3
Installation Guide Tandberg Data DPS1000 Series Model: DPS1100 and DPS1200, Release: 1.3 Contents Preface.......................................................................v About this guide..............................................................
More informationManaging External Identity Sources
CHAPTER 5 The Cisco Identity Services Engine (Cisco ISE) integrates with external identity sources to validate credentials in user authentication functions, and to retrieve group information and other
More informationSetting Up the DR Series System as a CIFS, NFS, or VTL Target on Networker Technical White Paper
Setting Up the DR Series System as a CIFS, NFS, or VTL Target on Networker 8.2.1 Technical White Paper Quest Engineering October 2017 2017 Quest Software Inc. ALL RIGHTS RESERVED. THIS WHITE PAPER IS FOR
More information202 Lab Introduction Connecting to the Lab Environment
202 Lab Introduction Connecting to the Lab Environment Objectives During this v7.1 Deployment lab, each student (from the Blue group or Green group) must verify access (and permissions) to their assigned
More informationSetUp GUIDE. Wisenet WAVE COLDSTORE. Version 3.2
SetUp GUIDE Wisenet WAVE COLDSTORE Version 3.2 Contents 1 Introduction 3 1.1 About This Setup Guide 3 1.2 Before You Start 3 1.3 Supported Operating Systems 3 2 Understanding the Setup Process 3 3 Finding
More informationOnline Backup Manager v7 Quick Start Guide for Synology NAS
Online Backup Manager v7 Quick Start Guide for Synology NAS Copyright Notice The use and copying of this product is subject to a license agreement. Any other use is prohibited. No part of this publication
More informationA mandatory user profile is created by an administrator and assigned to one or more users to create a consistent user profile.
Mandatory profile Introduction On computers running Windows 2000, user profiles automatically create and maintain the desktop settings for each user's work environment on the local computer. A user profile
More informationInstalling the Cisco Prime Optical Client
CHAPTER 7 This chapter describes how to install and start the Cisco Prime Optical 9.3.1 client on Windows, Solaris, or Linux. When you install the Prime Optical client, you automatically install Cisco
More informationConfiguration Export and Import
This chapter includes the following sections:, page 1 From the Export & Import, you can schedule configuration backup for Cisco UCS Central and the registered Cisco UCS Domains. You can schedule export
More informationILTA HAND 6A. Implementing and Using. Windows Server In the Legal Environment
ILTA 2013 - HAND 6A Implementing and Using Windows Server 2012 In the Legal Environment Table of Contents Purpose of This Lab... 3 Lab Environment... 3 Presenter... 3 Exercise 1 Getting Familiar with Windows
More informationParallels Virtuozzo Containers 4.6 for Windows
Parallels Parallels Virtuozzo Containers 4.6 for Windows Deploying Microsoft Clusters Copyright 1999-2010 Parallels Holdings, Ltd. and its affiliates. All rights reserved. Parallels Holdings, Ltd. c/o
More informationBarracuda NextGen Report Creator
The creates customized reports using statistics and logs collected on Barracuda NextGen F-Series Firewalls. Each report can be configured to use multiple appliances, custom or predefined report data templates,
More informationvrealize Suite Lifecycle Manager 1.0 Installation and Management vrealize Suite 2017
vrealize Suite Lifecycle Manager 1.0 Installation and Management vrealize Suite 2017 vrealize Suite Lifecycle Manager 1.0 Installation and Management You can find the most up-to-date technical documentation
More informationLiveNX Upgrade Guide from v5.1.2 to v Windows
LIVEACTION, INC. LiveNX Upgrade Guide from v5.1.2 to v5.1.3 - Windows UPGRADE LiveAction, Inc. 3500 Copyright WEST BAYSHORE 2016 LiveAction, ROAD Inc. All rights reserved. LiveAction, LiveNX, LiveUX, the
More informationQuick Start Guide. Version R94. English
Using ShadowControl ImageManager for Offsite Replication Quick Start Guide Version R94 English December 12, 2016 Copyright Agreement The purchase and use of all Software and Services is subject to the
More informationConfiguring and Managing WAAS Print Services
13 CHAPTER This chapter describes how to configure and manage the WAAS print services feature that allows Edge WAEs to function as print servers in your branch offices. Note Throughout this chapter, the
More informationWindows 8.1 and Windows 10 a) Connect to wireless network Click on the wireless icon in taskbar. Select detnsw and click on Connect.
1 HSHS BYOD Wireless Connection Windows 8.1 and Windows 10 a) Connect to wireless network Click on the wireless icon in taskbar. Windows 8.1 icon: Windows 10 icon: Select detnsw and click on Connect. or
More informationITCorporation HOW DO I INSTALL A FRESH INSTANCE OF ANALYZER? DESCRIPTION RESOLUTION. Knowledge Database KNOWLEDGE DATABASE
KNOWLEDGE DATABASE HOW DO I INSTALL A FRESH INSTANCE OF ANALYZER? 3. Click on GMS/Analyzer - Virtual Appliance or GMS/Analyzer - Virtual Appliance 950GB under GMS - Virtual Appliance. Note: It is not recommended
More informationNetBackup TM for VMware configuration
289771 NetBackup TM for VMware configuration This document describes how to use NetBackup 6.5 with VMware virtual machines that run on VMware ESX servers. License requirements Features available in NetBackup
More informationPerform Backup and Restore
, page 1 You can schedule periodic backups using the Cisco Prime Collaboration user interface, or run backup commands manually by logging in to the system as an admin user (CLI user). However, you must
More informationOnline Help StruxureWare Data Center Expert
Online Help StruxureWare Data Center Expert Version 7.2.7 What's New in StruxureWare Data Center Expert 7.2.x Learn more about the new features available in the StruxureWare Data Center Expert 7.2.x release.
More informationConfiguring the WT-4 for ftp (Ad-hoc Mode)
En Configuring the WT-4 for ftp (Ad-hoc Mode) Windows XP Introduction This document provides basic instructions on configuring the WT-4 wireless transmitter and a Windows XP Professional SP2 ftp server
More informationefolder BDR for Veeam VMware Continuity Cloud Guide
efolder BDR for Veeam VMware Continuity Cloud Guide Setup Continuity Cloud Import Backup Copy Job Restore Your VM Accessing the Continuity Cloud Host uh6 efolder BDR Guide for Veeam Page 1 of 36 INTRODUCTION
More informationXIA Configuration Server
XIA Configuration Server XIA Configuration Server v6 Cloud Services Quick Start Guide Tuesday, 20 May 2014 1 P a g e X I A C o n f i g u r a t i o n C l o u d S e r v i c e s Contents Overview... 3 Creating
More informationMicrosoft Outlook Live
MCAST Microsoft Outlook Live Web Access Table of Contents Logging On to Microsoft Outlook Live... 2 Basic Website Navigation... 7 Changing Your Password... 9 Help Function... 13 Logging off Microsoft Outlook
More informationThis guide details the deployment and initial configuration necessary to maximize the value of JetAdvantage Insights.
HP JetAdvantage Insights Deployment Guide This guide details the deployment and initial configuration necessary to maximize the value of JetAdvantage Insights. 1. Overview HP JetAdvantage Insights provides
More informationPC Agent Quick Start. Opening the Agent. Logging in to the Agent. Connected Backup. Version 8.6. Revision 0
T E C H N I C A L N O T E Version 8.6 PC Agent Quick Start Revision 0 Use this document as a quick reference for common Connected Backup PC Agent tasks. If the Agent is not on your computer, contact your
More informationAuthlogics Forefront TMG and UAG Agent Integration Guide
Authlogics Forefront TMG and UAG Agent Integration Guide With PINgrid, PINphrase & PINpass Technology Product Version: 3.0.6230.0 Publication date: January 2017 Authlogics, 12 th Floor, Ocean House, The
More informationUpgrade Tool Guide. July
Upgrade Tool Guide July 2015 http://www.liveaction.com 4.X to 5.0 The Upgrade Guide from 4.X to 5.0 consists of three parts: Upgrading the LiveAction Server Upgrading the LiveAction Node Upgrading the
More informationSMEC ASSET MANAGEMENT SYSTEM PMS Version 5.5. System Administrator s Guide
SMEC ASSET MANAGEMENT SYSTEM PMS Version 5.5 System Administrator s Guide January 2015 PREPARATION, REVIEW AND AUTHORISATION Revision # Date Prepared by Reviewed by Approved for Issue by 1 21-Jan-2015
More informationThe Ip address / Name value should be: srvvcenter-cis
CIS133 Installation Lab #1 - DESKTOP CLIENT OpenSUSE Install. Before beginning the installation, create a virtual machine in which you will install the operating system. 1) Open the VMware vsphere Client.
More information3M Clean-Trace Hygiene Monitoring and Management System
User Manual Supplement Number: TB. 378178 Effective Date: November 2018 Supersedes: (New) Technology Platform: 3M Clean-Trace Hygiene Monitoring and Management System Originating Location: St. Paul, MN
More informationClick Studios. Passwordstate. Password Discovery, Reset and Validation. Requirements
Passwordstate Password Discovery, Reset and Validation Requirements This document and the information controlled therein is the property of Click Studios. It must not be reproduced in whole/part, or otherwise
More informationRestoring data from a backup
Restoring data from a backup The following topics explain how to find a backup to restore and then perform a restore: Finding a backup to restore on page 98 Restoring to the original location on page 101
More information