NO: PH-185 PRODUCT: E3JK Photoelectric Sensors DATE: May 2014 TYPE: Discontinuation Notice E3JK Universal AC/DC Supply Voltage Photoelectric Sensors to be Discontinued February 2015; Replace with E3JM Last order date: February 2015 Note: Date is subject to change based on raw materials and components availability at the factory. The pre-wired E3JK photoelectric sensors with universal AC/DC supply voltage will be discontinued at the end of February 2015, including through-beam, retro-reflective and diffuse reflective models. The recommended replacement E3JM series meets the AC/DC supply voltage requirement; however, it has significant differences in performance, size, shape, and wiring. Affected Parts Description E3JK-R4S3 2M E3JM-R4S4-US E3JK-R4M2-US Retro-reflective, not polarized E3JK-R4M2 2M E3JK-R4M1-US E3JK-R4M1 2M E3JK-R2S3 5M E3JM-R4S4-US E3JK-R2S3 2M E3JM-R4S4-US E3JK-R2R3 5M E3JM-R4R4-US E3JK-R2R3 2M E3JM-R4R4-US E3JK-R2M2-US Retro-reflective, polarized E3JK-R2M2 5M E3JK-R2M2 2M E3JK-R2M1-US E3JK-R2M1 2M E3JK-R2H2-G No recommended replacement E3JK-R2H1-G No recommended replacement E3JK-DS30S3 E3JM-DS70S4-US E3JK-DS30M2-US E3JM-DS70M4-US Diffuse reflective E3JK-DS30M2 2M E3JM-DS70M4-US E3JK-DS30M1-US 2M E3JM-DS70M4-US E3JK-DS30M1 5M E3JM-DS70M4-US E3JK-DS30M1 2M E3JM-DS70M4-US E3JK-5S3-N 2M E3JM-10S4-US E3JK-5M2-N-US 2M E3JM-10M4-US E3JK-5M2-N 5M E3JM-10M4-US Through-beam set E3JK-5M2-N 2M E3JM-10M4-US E3JK-5M1-N-US 2M E3JM-10M4-US E3JK-5M1-N 5M E3JM-10M4-US E3JK-5M1-N 2M E3JM-10M4-US Through-beam emitter E3JK-5L-N 2M E3JM-10M4-US Through-beam receiver E3JK-5DM2-N 2M E3JM-10M4-US
Cautions on Applying Replacements Item Mounting bracket E39-L40 E39-L53 included with product provided with E3JK sensors provided with E3JM sensors Size 18 W x 50 H x 50 D mm 25 W x 65 H x 65 D mm Color Light grey Black Connection Pre-wired Terminal block Sensing distance Through-beam E3JK-5[][][]-N(-US): 5 m E3JM-10[]4-US: 10 m Diffuse reflective E3JK-DS30[][](-US): 300 mm E3JM-DS70[]4-US: 700 mm Retro-reflective E3JK-R2[][](-US): 2.5m (With MSR) E3JM-R4[]4-US: 4 m (with MSR) E3JK-R4[][]: 4 m (No MSR) Degree of protection IP64 IP66 Light-ON/Dark-ON operation E3JK-[][][]1: Light-ON -- E3JK-[][][]2: Dark-ON -- E3JK-[][][]3: Light-ON/Dark-ON select by wire E3JM-[][][]-US: Light-ON/Dark-ON select by wire or switch Through-beam sensors are used in sets containing both emitter and receiver. When replacing E3JK-5[][][]-N sensors, replace the set with E3JM-10[]4-US through-beam set. The sensor will not operate if the emitter or received are replaced separately. Detail of Differences Reference Documentation Description Media Publication number E3JK and E3JM AC/DC photoelectric sensors data sheet PDF CSM_E3JM_E3JK_DS_E_11A_1 Body Color Case: Light grey Case: Black 2
Wiring Diagrams Model E3JK-5L-N (Emitter) Model E3JM-10L (Emitter) Model E3JK-5M[]-N (Receiver) Model E3JK-DS30M[](-US) Model E3JK-R[]M[](-US) Model E3JM-10DM4-US (Receiver) Model Model E3JM-DS70M4-US Model E3JK-5S3-N Model E3JK-DS30S3 Model E3JK-R4S3 Model E3JM-10S4-US Model E3JM-R4S4-US Model E3JM-DS70S4-US Mounting Holes 3
Dimensions E3JK-R2 (-US) E3JK-R4 (-US) E3JK-DS30 (-US) With Mounting Bracket Attached 4
Characteristics Item Sensing distance 5 m 10 m Standard sensing object Opaque: 14.8-mm dia. min. Opaque: 14.8-mm dia. min. Directional angle Both Emitter and Receiver 3 to 20 Both Emitter and Receiver 3 to 20 Light source (wavelength) Infrared LED (950 nm) Infrared LED (950 nm) Power supply voltage Power consumption Control output Response time DC AC 3 W max. (Emitter 1.5 W max. Receiver 1.5 W max.) 3 W max. (Emitter 1.5 W max. Receiver 1.5 W max.) Relay output (E3JK-5M[]-N): SPDT, 250 VAC, 3 A max. (cosφ= 1) DC SSR output (E3JK-5S3-N): Negative: common 48 VDC, 100 ma max. Leakage current: 0.1 ma max. With load short-circuit protection E3JK-5M[]-N: 30 ms max. E3JK-5S3-N: 10 ms max. Sensitivity adjustment None None Ambient illumination (Receiver side) Ambient temperature range Storage: 30 C to 70 C 3 W max. (Emitter 1.5 W max. Receiver 1.5 W max.) 3 W max. (Emitter 1.5 W max. Receiver 1.5 W max.) Relay output (E3JM-10M4-US): SPDT, 250 VAC, 3 A (cosφ=1) max., DC SSR output (E3JM-10S4-US): 48 VDC, 100 ma max. (residual voltage: 2 V max.) Light-ON/Dark-ON selectable E3JM-10M4-US: 30 ms max. E3JM-10S4-US: 5 ms max. Storage: 40 C to 70 C Ambient humidity range Operating: 45% to 85% Storage: 35% to 95% Operating: 45% to 85% Storage: 35% to 95% Insulation resistance 20 MΩ min. at 500 VDC 20 MΩ min. at 500 VDC Shock resistance Destruction Malfunction 500 m/ s 2 3 times each in X, Y, and Z E3JK-5M[]-N: 100 m/s 2 3 times each in X, Y, and Z E3JK-5S3-N: 500 m/ s 2 3 times each in X, Y, and Z Degree of protection IEC60529 IP64 IEC60529 IP66 Connection method Pre-wired Terminal block Accessories Mounting Bracket (with screws), Nuts, Instruction manual 500 m/s 2 for 3 times each in X, Y, and Z 100 m/ s 2 for 3 times each in X, Y, and Z Mounting Bracket (with screw), Nuts, Terminal Protection Cover, Instruction manual 5
Characteristics (continued) Item Sensing distance R2[][](-[]): 2.5 m (When using E39-R1) R4[][]: 4 m (When using E39-R1) 4 m (When using E39-R1) Directional angle 1 to 5 1 to 5 Light source (wavelength) Red LED (660 nm) Red LED (660 nm) Power supply voltage Power DC 2 W max. 2 W max. consumption AC 2 W max. 2 W max. Control output Response time Relay output (E3JK-R2/4M[]): SPDT, 250 VAC, 3 A max. (cosφ=1) 5 VDC,10 ma min. DC SSR output (E3JK-R2/4S3): Negative: common 48 VDC, 100 ma max. Leakage current: 0.1 ma max. With load short-circuit protection E3JK-R2/-4M[]: 30 ms max. E3J-R2/4S3: 5 ms max. Sensitivity adjustment None None Ambient illumination (Receiver side) Ambient temperature range Operating: -25 C to 55 C, Storage:-30 C to 70 C Relay output (): SPDT, 250 VAC, 3 A (cosφ=1) max., DC SSR output (E3JM-R4S4-US): 48 VDC, 100 ma max. (residual voltage: 2 V max.) Light-ON/Dark-ON selectable : 30 ms max. E3JM-R4S4-US: 5 ms max. Storage: 40 C to 70 C Ambient humidity range Operating: 45% to 85% Storage: 35% to 95% Operating: 45% to 85% Storage: 35% to 95% Insulation resistance 20 MΩ min. at 500 VDC 20 MΩ min. at 500 VDC Destruction 500 m/s 2 for 3 times each in X, Y, and Z 500 m/s 2 for 3 times each in X, Y, and Z Shock resistance Malfunction 100 m/s 2 for 3 times each in X, Y, and Z 100 m/s 2 for 3 times each in X, Y, and Z Degree of protection IEC60529 IP64 IEC60529 IP66 Connection method Pre-wired Terminal block Accessories Mounting Bracket (with screw), Nuts, Mounting Bracket (with screws), Nuts, Terminal Protection Cover, Instruction Instruction manual, Reflector manual, Reflector 6
Characteristics (continued) Item Sensing distance White paper (100 100 mm): 300 mm White paper (200 200 mm): 700 mm Light source (wavelength) Infrared LED (950 nm) Infrared LED (950 nm) Power supply voltage Power DC 2 W max. 2 W max. consumption AC 2 W max. 2 W max. Control output Response time Relay output (E3JK- DS30M): SPDT, 250 VAC, 3 A max. (cosφ=1) DC SSR output (E3JK-DS30S3): Negative: common 48 VDC,100 ma max. Leakage current: 0.1 ma max. With load short-circuit protection E3JK-DS30M[]: 30 ms max. E3JK-DS30S3: 5 ms max. Sensitivity adjustment One-turn adjuster One-turn adjuster Ambient illumination (Receiver side) Ambient temperature range Ambient humidity range Storage: 30 C to 70 C Operating: 45% to 85% (with no condensation), Storage: 35% to 95% (with no condensation) Relay output (E3JM-DS70M4-US): SPDT, 250 VAC, 3 A (cosφ=1) max., DC SSR output (E3JM-DS70S4-US): 48 VDC, 100 ma max. (residual voltage: 2 V max.) Light-ON/Dark-ON selectable E3JM-DS70M4-US: 30 ms max. E3JM- DS70S4-US: 5 ms max. Storage: 40 C to 70 C Operating: 45% to 85% (with no condensation), Storage: 35% to 95% Insulation resistance 20 MΩ min. at 500 VDC 20 MΩ min. at 500 VDC Destruction 500 m/s 2 for 3 times each in X, Y, and Z 500 m/s 2 for 3 times each in X, Y, and Shock Z resistance Malfunction 100 m/s 2 for 3 times each in X, Y, and Z 100 m/s 2 for 3 times each in X, Y, and Z Degree of protection IEC60529 IP64 IEC60529 IP66 Connection method Pre-wired Terminal block Accessories Mounting Bracket (with screw), Nuts, Mounting Bracket (with screws), Nuts, Terminal Protection Cover, Instruction Instruction manual manual Operation Methods Sensitivity adjustment E3JK-5[][][]-N(-US): None E3JK-R[]M/S[](-US): None E3JK-DS30[][](-US): One-turn adjuster Light-ON/Dark-ON adjustment E3JK-[][][]1: Light-ON E3JK-[][][]2: Dark-ON E3JK-[][][]3: Light-ON/Dark-ON select by wire Sensitivity adjustment E3JM-10[]4-US: None E3JM-R4M/S4-US: None E3JM-DS70[]4-US: One-turn adjuster Light-ON/Dark-ON adjustment E3JM-[][][][]-US: Light-ON/Dark-ON select by wire or switch 7
Operation Ratings 8
9