Standard Wind DPR: Essential Contents [Note: The below provided sections and the sub points indicated in the table have to be mandatorily provided by the Wind Project Developers while submitting the Detailed Project Report (DPR). The Wind Project Developers are requested to submit the table along with reference page number against each of the sub-points along with the DPR] Section 1. Checklist In this section the project developer shall confirm that the following documents/information are provided in the DPR: Registration Letter from NRED The wind power project is registered for [insert] MW with New and Renewable Energy, GoMP. This DPR is for [insert] MW. In case part capacity has been applied earlier as a separate DPR, attach execution permission for part capacity if same has been granted by Commissioner, NRE. Capacity utilization factor is > = 20% as per WRA Complete copy of WRA report Micro-siting layout of WTGs on topology map and coordinates in form of longitude and latitude (UTM) WTGs selected for the project are included in RLMM issued by NIWE Transmission/Grid connection approval For Forest Land: Copy of 1 st and 2 nd stage clearance 1 For Revenue Land: Letter of allotment from concerned collector 2 For Private Land: Copy of sale deed 3 Is DPR Filing as per default timeline defined in wind policy (Select as appropriate: Yes/No) If no, provide letter of extension from NRED 4 PERT chart including the major project activities 2. Salient Features Project capacity (MW) Land type, Village, coordinates (longitude/latitude) Nearest town, railway station and airport Nearest connecting state/national highway Page Reference 1 Fill NA, if not applicable 2 Fill NA, if not applicable 3 Fill NA, if not applicable 4 If DPR is filed timely; say NA
WTG type and make Connecting substation and voltage Annual Energy Production per WTG (MkWh) Capacity Utilisation Factor (%) Provide above details (Format [1]) 3. Clearances/Mandatory Approvals Registration Letter from NRED (Attach as Appendix [1]) In case part capacity has been applied earlier as a separate DPR, attach execution permission for part capacity if same has been granted by Commissioner, NRE. (Attach as Appendix [2]) Consent for final coordinates in registration letter as per final micro-siting (Attach as Appendix [3]) Transmission/Grid connection approval (Attach as Appendix [4]) NIWE Certification for WTGs (RLMM) (Attach as Appendix [5]) Information on land to be covered under section [6] and Appendix [8] 4. WRA and Micro-siting Details Mast Information: Coordinates (Log./Lat.) and locations (Village, Tehsil and District of the Mast Date of installation Mast Height Years of measurement Technical standards followed for Mast commissioning and monitoring Fill above details (Format [2]) Complete WRA Report (Attach as Appendix [6]) Monthly mean wind speed data (Format [3]) Tools used for assessment of Annual Energy Production Power Curve (Format [4]) Annual wind-rose diagram Monthly and Annual Energy Production details (Format [5]) Capacity Utilization Factor (should be >=20%) (Format [5]) Micro-siting Details Micro-siting layout on topology map (Attach as Appendix [7]) longitudes and latitudes of proposed WTGs (Format [1]) 5. Equipment WTG make
WTG model Rated capacity (MW) Hub Height (m) Blade Length and Pitch Diameter (m) Cut-in speed (m/s) Cut-out speed (m/s) Generator type and voltage Provide above details in Format [6] 6. Power Evacuation Location of pooling sub-station Capacity of pooling sub-station Location of Grid Sub-station Connecting Voltage Level Provide above details in Format [7] Detailed drawing of evacuation Plan (Attach as Appendix [8]) 7. Land Details Type of Land (Forest/Revenue/Private) For Forest Land: Copy of 1 st and 2 nd stage clearance 5 For Revenue Land: Letter of allotment from concerned collector 6 For Private Land: Copy of sale deed 7 Provide above details as Appendix [9] 8. Project Implementation Plan Timeline Check Is DPR Filing as per default timeline defined in wind policy If no, provide letter of extension from NRED (Attach as Appendix [10]) 8 Implementation Schedule and Methodology PERT chart including the major project activities (Appendix [11]) Methodology for Project implementation and monitoring Technical Standard followed for project design and Implementation 9. Appendices Appendix 1: Registration Letter from NRED Appendix 2: Attach execution permission for part capacity if same has been granted by Commissioner, NRE. 5 Fill NA, if not applicable 6 Fill NA, if not applicable 7 Fill NA, if not applicable 8 If DPR is filed timely; say NA
Appendix 3: Consent for final coordinates in registration letter as per final micro-siting Appendix 4: Transmission/Grid connection approval Appendix 5: NIWE Certification for WTGs Appendix 6: Complete WRA Report Appendix 7: Micro-siting layout on topology map Appendix 8: Detailed drawing of evacuation Plan Appendix 9: For Forest Land: Copy of 1 st and 2 nd stage clearance, For Revenue Land: Letter requesting allotment from concerned collector, For Private Land: Copy of sale deed Appendix 10: Provide letter of extension from NRED (if DPR is filed after the period of default timeline as per wind policy) Appendix 11: PERT chart including the major project activities
Format 1: Salient Features and Location Details Generic Details WTG Details Connectivity Operational Parameters Energy Generation Project capacity (MW) Registration number of NRED Nearest town Nearest railway station Nearest airport Nearest state/national highway WTG make and model Rated Capacity Connecting Substation Connecting Voltage (KV) Expected Annual Energy Generation (MkWh) at P-50 CUF (%) Annual Free Electricity per WTG (MkWh) Location Details of WTGs SALIENT FEATURES Land Type WTG Location Number Longitude (UTM) Latitude (UTM) Select either of Private/ Govt./ Forest District Tehsil Village Khasra Number 1 2 3 4 5 6 7 8 9 Add as required
Format 2: Wind Mast Details Location of the Mast (Village, Tehsil, District) Coordinates of the Mast (Long./Lat.) Date of installation Mast Height Years of measurement Technical Standards followed for Mast Commissioning and monitoring WIND MAST DETAILS
Format 3: Monthly Mean Wind Speed Data MONTHLY MEAN WIND SPEED DATA Month Mean wind speed data at [xx]m height (m/s) January February March April May June July August September October November December May June
Format 4: Power Curve POWER CURVE Wind speed (m/s) Power output (kw) Power coefficient C P
Format 5: Monthly and Annual Energy Production Software/Tools used ANNUAL ENERGY PRODUCTION DETAILS AT P-50 LEVEL Annual average wind speed used (m/s) Input data used Surface Roughness Wake coefficient Turbine model Air density (kg/m 3 ) Other parameters (please mention) Losses, uncertainties and errors considered Monthly Mean Energy Generation per WTG (MWh) AEP calculated WTG availability (%) Grid availability (%) Anemometry (%) Topographical (%) Power Curve (%) Wind speed variability (%) Wake loss model (%) Extrapolation (%) January February March April May June July August September October November December AEP per WTG (MWh) Total annual AEP(MWh) Capacity Utilization Factor (%) Availability (%) Uncertainties (%)
Format 6: Equipment Details EQUIPMENT DETAILS WTG make WTG model Rated capacity (MW) Hub Height (m) Blade Length and Pitch Diameter (m) Cut-in speed (m/s) Cut-out speed (m/s) Generator type Generator Rating Generator voltage (KV)
Format 7: Evacuation of Power EVACUATION OF POWER Location of pooling sub-station Capacity of pooling sub-station Location of Grid Sub-station Connecting Voltage Level (kv)