Specification Sheet lumencove.0 Client Project name Order# Type Qty FEATURES AND BENEFITS Physical : Low copper content extruded aluminum housing Available in,,, or 8 sections Electro-statically applied polyester powder coat finish Tool-less LED frame adjustable mechanism, +/- 90 tilt angle Low profile design White standard finish Extruded polycarbonate lens, clear or frosted Indoor applications, dry location only Performance : 700K, 000K, 500K, 000K, Red, Green, Blue static colors available Available in Regular Output or High Output versions Lumen maintenance 80,000 hrs [L70 @ 5 C] Lumen maintenance 60,000 hrs [L70 @ 50 C] Resolution per foot or per fixture (configured with LumenID V software & DMX/RDM) Operating temperatures: -5 C to 50 C [-F to F] Electrical : Line voltage luminaire for 00 to 77V Power and data in cable (), white cable and connector standard Thumb latch connectors, breakable under load 5W/ft - RO version, W/ft - HO version Dimming options: 0-0 volt, DMX/RDM enabled, DALI, Lumentalk or Lutron EcoSystem Enabled CCT 700K 000K 500K CERTIFICADO No.0588, 05885 RETILAP Performance summary Based on ft fixture, clear lens* Delivered Output RO [lm] Delivered Output HO [lm],90,5,965,50,9,57 000K,806,59 Frosted lens option delivered output ratio = x0.75 *Photometric performance is measured in compliance with IESNA LM-79-08. 9 ", ", 5 ", 7 ", 9 6 " [mm, 60mm, 908mm, 07mm, 0mm] 7 9 9 ", 9 6 ", 0 ", 6 ", 89 6 " [85mm, 8mm, 78mm, 080mm, 76mm] TOP VIEW FRONT VIEW " [6mm] Minimum end to end spacing SIDE VIEW " [56mm] 7 8 " [7mm] " [8mm] 90 90 Maximum Pivot Limits /7.877.97.00 P.5.97.00
Specification Sheet lumencove.0 MOUNTING DETAILS SUGGESTED COVE DIMENSIONS 0 beam angle Min. " 8 [80mm] N.B. Minimum cove height depends on sight line " [5mm] 5 " [8mm] MAXIMUM ANGLE ADJUSTMENT A jumper cable is required for angles greater than 5. TOP VIEW TOP VIEW 5 /7.877.97.00 P.5.97.00
Specification Sheet lumencove.0 ACCESSORIES Order separately Control Systems: Control Boxes: LTO LCU LID LTN CBX Lumentouch is a wall mount DMX 5 controller keypad. Lumencue is a USB / mini SD DMX 5 controller. LumenID is a diagnostic and addressing DMX 5 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. Lumentone is a simple pre-programmed DMX 5 controller with a push button rotary dial and live feedback. DMX/RDM control box. Up to six power and data outputs to fi xtures or fi xture runs. Ethernet enabled option. Refer to CBX specifi cation sheet for details. Leader Cable : LCSLC Leader Cable for Lumencove.0, 0 or 5 [m or 7.6m] standard lengths Jumper Cable : LCSJC Jumper Cable for Lumencove.0, or [0.6m,.m] standard lengths /7.877.97.00 P.5.97.00
Specification Sheet lumencove.0 TYPICAL WIRING DIAGRAMS Non-Dimming or Lumentalk Dimming Version % minimum dimming value for Lumentalk dimming American CE USE Green Yellow/Green Ground Black Brown Live 00-77V White Blue Neutral Red/Purple Black 0-0V / Data + Orange Grey 0-0V / Data - 00-77V Wire-nuts Maximum run length, 8A maximum - Lumencove.0 RO 5W/ft Cable length/voltage 0V 0V 77V 0ft leader cable 75ft 50ft 50ft 6ft 6ft 50ft Maximum run length, 8A maximum - Lumencove.0 HO W/ft From dimmer 0ft leader cable Dimming Version (0-0V) 0% minimum dimming value 75ft 5ft 76ft 7ft 7ft 7ft Maximum run length calculations are typically based on ft fixtures. Consult factory for specific applications. Data+ red Data-- orange 00-77V To fixtures Dimmer 0-0V /7.877.97.00 P.5.97.00
Open Preset Close Off Specification Sheet lumencove.0 TYPICAL WIRING DIAGRAMS - continued Dimming Version (DALI) % minimum dimming value American CE USE Green Yellow/Green Ground Black Brown Live 00-77V White Blue Neutral Red/Purple Black 0-0V / Data + Orange Grey 0-0V / Data - From DALI Controller Data+ red Data-- orange 00-77V To fixtures Typical DALI Controller Maximum run length, 8A maximum - Lumencove.0 RO 5W/ft Cable length/voltage 0V 0V 77V 0ft leader cable 75ft 50ft 50ft 6ft 6ft 50ft Maximum run length, 8A maximum - Lumencove.0 HO W/ft 0ft leader cable 75ft 5ft 76ft 7ft 7ft 7ft Maximum run length calculations are typically based on ft fixtures and up to 6 DALI or EcoSystem enabled fixtures per run. Consult factory for specific applications. Each fixture requires DALI or Lutron EcoSystem address. Dimming Version (EcoSystem )* % minimum dimming value From Lutron EcoSystem Controller Data+ red Data-- orange 00-77V To fixtures LUTRON Grafik Eye shown *Each Lutron EcoSystem enabled fixture has its own address; for the example shown above, there are a total of EcoSystem addresses. 5/7.877.97.00 P.5.97.00
lumencove.0 Specification Sheet TYPICAL WIRING DIAGRAMS - continued Star Layout (DMX/RDM) % minimum dimming value American CE USE Green Black White Red/Purple Orange Yellow/Green Brown Blue Black Grey Ground Live 00-77V Neutral 0-0V / Data + 0-0V / Data - Data Lumentouch.0 input Maximum run length, 8A maximum - Lumencove.0 RO 5W/ft Cable length/voltage 0V 0V 77V 0ft leader cable CBX-ST 00-77V Data input 00-0V Maximum run length, 8A maximum - Lumencove.0 HO W/ft 0ft leader cable 75ft 7ft Maximum run length calculations are typically based on ft fixtures and up to DMX/RDM enabled fixtures per DMX/RDM run. Consult factory for specific applications. Each fixture requires DMX address. Daisy Chain Layout (DMX/RDM) % minimum dimming value for Lumentalk dimming Lumentouch.0 00-77V Data input 6/7.877.97.00 P.5.97.00 00-0V CBX-DS CBX-DS 00-77V Data input
Specification Sheet lumencove.0 HOW TO ORDER LCS 5 6 7 5 Housing: LCS RO - Lumencove.0 Regular Output 5W/ft LCS HO - Lumencove.0 High Output W/ft Lens: CL - Clear lens FR - Frosted lens 6 Voltage: Finish: 00-00 volts 0-0 volts 08-08 volts 0-0 volts 0-0 volts 77-77 volts WH - Smooth white CC - Custom color and finish (please specify RAL color) Length (nominal): - / inches (mm) (0.57 kg/.5 lbs) - inches (60mm) (. kg/.5 lbs) 6-5 / inches (908mm) (.7 kg/.75 lbs) 8-7 / inches (07mm) (.8 kg/5 lbs) 96-9 9/6 inches (0mm) (.56 kg/0 lbs) 7 Control: NO - No Dimming LT - Lumentalk Dimming DIM - 0-0V Dimming DMX/RDM - DMX/RDM enabled 5 DALI - DALI Dimming 6 ES - Lutron EcoSystem Enabled Dimming 7 Colors and Color temperatures: 7K - 700K 0K - 000K 5K - 500K 0K - 000K RD - Red (8-0 weeks lead time) GR - Green (8-0 weeks lead time) BL - Blue (8-0 weeks lead time) Consult factory for HO static red configuration. North American RAL colors specified with RAL number only are provided with a smooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary. % minimum dimming value. Available for,, and 8 lengths only. 0% minimum dimming value. 5 % minimum dimming value. Fixtures set to by fixture resolution. DMX address per fixture. 6 % minimum dimming value. DALI address per fixture. 7 % minimum dimming value. Available for,, and 8 lengths only. EcoSystem address per fixture. 7/7.877.97.00 P.5.97.00