System Requirements Page 1 f 11 Prficy* System Requirements Cntents Prficy* Machine Editin 9.50... 2 Operating System... 2 Windws Administratr Settings... 2 Prcessr Speed and Memry... 2 Miscellaneus Requirements... 3 Prficy* View & Cntrl Runtime (Windws PC) 9.50... 4 Operating System... 4 Prficy* Prcess Systems 3.50... 5 System Cmpnents... 5 System Level Operating System... 5 Reginal Settings... 5 Prficy* Change Management 9.50... 6 Operating System... 6 Prcessr Speed and Memry... 6 Miscellaneus Requirements... 7 Subversin Repsitry... 8 Example SVN Installatin... 8 Supprted Prduct Mdules... 10 Prject Type Mdules... 10 Thin Client Mdules... 10 As-is Prject Type Mdules... 11 2017 General Electric Cmpany. *Indicates a trademark f the General Electric Cmpany r its subsidiaries
System Requirements Page 2 f 11 Prficy* Machine Editin 9.50 Operating System Machine Editin Prduct Windws 7 SP1 Windws 8 and 8.1 Windws 10 Lgic Develper PLC QP+ View Develper QP+ Lgic Develper PC Ntes a. Windws reginal settings must be set t English b. 32-bit & 64-bit variatins f Windws are supprted (64-Bit recmmended) c. It is a gd security practice t always run sftware that has had security patches and ther perating system supprt fixes prvided by Micrsft and applied by the wner/peratr as part f a cyber maintenance prgram. d. It is recmmended t apply security patches and ther perating system supprt fixes befre installing e. When using Prfinet a 64 bit Operating System is highly recmmended. Windws Administratr Settings Sme features f Prficy* Machine Editin are nt supprted when running withut elevated access. When using the fllwing features, yu can lwer yur User Accunt Cntrl settings and/r set up Prficy* Machine Editin Engineering t always "Run As Administratr": View and Lgic Develper PC View and Lgic Runtimes EGD Management Tl PAC Systems Analyzer Tl Prfinet DCP Tl PAC8000 I/O Cnfiguratin Tl Serial PLC Cmmunicatins Creating Custm Prject Templates IEC 61850 Cnfiguratr Tlbx ST Trender Prcessr Speed and Memry Minimum (fr small t medium-sized prjects): Intel Cre i5 with 4 GB RAM AMD FX r Phenm II X6 with 4 GB RAM Strngly recmmended fr large prjects r when using multi-instance 2017 General Electric Cmpany. *Indicates a trademark f the General Electric Cmpany r its subsidiaries
System Requirements Page 3 f 11 Intel quad-cre Cre i7 with 8 GB RAM and 64-bit Windws AMD higher FX r Phenm II X6 mdels with 8 GB RAM and 64-bit Windws Miscellaneus Requirements Internet Explrer Versin: 11.0 r newer with current updates. Nte: Install Internet Explrer befre installing Machine Editin. TCP/IP Netwrk prtcl-based cmputer (if yu use an Ethernet cnnectin)..net Framewrk 4.6 Full. If the Micrsft.NET Framewrk is nt yet installed, it is autmatically included during the installatin f Machine Editin and may require a rebt t cmplete the installatin. This installatin requires a minimum f Windws 7 SP1. 2 GB f hard disk space. Additinal space is required fr yur prjects and temprary files. The Develpment Envirnment is supprted n VMware Player r VMware Wrkstatin 2017 General Electric Cmpany. *Indicates a trademark f the General Electric Cmpany r its subsidiaries
System Requirements Page 4 f 11 Prficy* View & Cntrl Runtime (Windws PC) 9.50 When yu install nly View Runtime r Cntrl Runtime frm the DVD, the Runtime executables are autmatically updated frm the develpment cmputer when the prject is dwnladed. Operating System Machine Editin Prduct Windws 7 SP1 Windws 8 and 8.1 Windws 10 QP+ View Develper - QP+ Lgic Develper PC - Windws 7 Ultimate, Windws 7 Enterprise, Windws 7 Prfessinal and Windws 10. Ntes The abve versins f Windws are supprted in bth 32-bit and 64-bit. Windws reginal settings must be set t English. Imprtant: Windws 8 and 8.1 des nt supprt View Runtime r Cntrl Runtime 233 MHz Pentium-based wrkstatin (1.6 GHz recmmended) 200 MB free hard disk space 128 MB RAM (1 GB recmmended) The fllwing table describes the minimum requirements needed fr the range f variables defined in yur prjects. Requirements Variables < 500 500-10000 > 10000 CPU 233 MHz 1 GHz 2 GHz Disk Space 200 MB 200 MB 200 MB RAM 128 MB 512 MB 1 GB 2017 General Electric Cmpany. *Indicates a trademark f the General Electric Cmpany r its subsidiaries
System Requirements Page 5 f 11 Prficy* Prcess Systems 3.50 Sme cmpnents f the Prficy* Prcess Systems prducts may (r may nt) be supprted n alternate perating systems. Fr detailed infrmatin, refer t the prduct's installatin guide fr mre infrmatin. System Cmpnents Prficy* Prcess Systems is made up f several prducts, mre details are available within the dcumentatin f thse prducts. Prduct Versin Engineering Wrkstatin Operatr Cnsle Applicatin Server System Server PME (LD PLC) 9.50 HMI (CIMPLICITY) 9.50 HMI (ifix) 5.8 EGD Driver 7.40k EGD Tls 6.01 System Level Operating System PPS Prduct Windws 7 Server 2012 Engineering Wrkstatin Operatr Cnsle Applicatin Server System Server Reginal Settings PPS Prduct Reginal Setting English OS German/French OS (Single-Byte) Simplified Chinese OS (Duble-Byte) Russian OS (Cyrillic) Engineering Wrkstatin U.S. LOCAL Operatr Cnsle U.S. LOCAL Applicatin Server U.S. LOCAL System Server U.S. LOCAL 2017 General Electric Cmpany. *Indicates a trademark f the General Electric Cmpany r its subsidiaries
System Requirements Page 6 f 11 Prficy* Change Management 9.50 Operating System Change Management Cmpnent Windws 7 Server 2008 SP2 Server 2008 R2 Server 2012 Server 2012 R2 Server Thick Client Scheduler Engine Thin Client Ntes Windws reginal settings must be set t English. Fr the abve Windws, yu must be an Administratr. PCM installatin and functinality are supprted nly while running in Administratr mde. Nn-administratr mde is nt supprted. The abve Windws are supprted in bth 32-bit and 64-bit. The PCM Server and Thick Client are nt supprted in envirnments that use Micrsft Terminal Services r Micrsft Cluster Server. The PCM Thin Client is supprted in envirnments that use Micrsft Terminal Services. T cnnect t the PCM server in a 64-bit envirnment, yu will need t enter the PCM server IP address and name in the hsts file. If yu install the PCM Server n Windws Server 2012 R2, after the installatin yu may need t run the fllwing cmmand line nce t make the PCM Server service appear in the Registry and the Services list prperly: "C:\Prgram Files (x86)\prficy\prficy Machine Editin\fxManager\Server\fxServer.exe" -service Prcessr Speed and Memry Fr the PCM Server, Thick Client, and Scheduler Engine: Minimum (fr small t medium-sized prjects): Intel Cre i5 with 4 GB RAM AMD FX r Phenm II X6 with 4 GB RAM Strngly recmmended fr large prjects: Intel quad-cre Cre i7 with 8 GB RAM and 64-bit Windws AMD higher FX r Phenm II X6 mdels with 8 GB RAM and 64-bit Windws Nte: See yur sales representative fr server system recmmendatins based n yur prjected number f PCM Clients and the prjected size f yur prject database. Fr the PCM Thin Client, including the Scheduler and Scheduler Editr used with the Thin Client: 2017 General Electric Cmpany. *Indicates a trademark f the General Electric Cmpany r its subsidiaries
System Requirements Page 7 f 11 1.5 GHz Pentium-based cmputer recmmended. 512 MB RAM (1 GB recmmended). Miscellaneus Requirements Internet Explrer Versin: 11.0, 10.0, 9.0, 8.0, r 7.0, with current updates. Nte: Install Internet Explrer befre installing Change Management. Ethernet Netwrk Adapter and the TCP/IP Netwrk Prtcl (100 Mbit)..NET Framewrk 4.6 Full fr the PCM Server, Thick Client, and Scheduler Engine. If the Micrsft.NET Framewrk is nt yet installed, it is autmatically included during the installatin f Change Management and may require a rebt t cmplete the installatin..net Framewrk 2.0 fr the PCM Thin Client. PCM Thick Client fr the PCM Scheduler Engine. Free hard disk space: 20 GB, plus strage space fr prject files, fr the PCM Server. 50 MB, plus strage space fr prject files, fr the PCM Thick r Thin Client (500 MB recmmended t start with). 50 MB (in additin t hard disk space required fr the PCM Thick Client) fr the PCM Scheduler Engine. One f the fllwing versin cntrl systems (VCS) fr the PCM Server: Apache Subversin versin 1.8.3 (r greater). Fr mre details, visit Apache s web site at http://subversin.apache.rg/packages.html and dwnlad any binary installer package fr Windws 32-bit that is based n versin 1.8.3 (r greater). Ntes Yu can chse t dwnlad and cmpile the surce files rather than dwnlading the binary installer files. Fr mre details, visit Apache's web site at http://subversin.apache.rg/dwnlad/. Subversin with Prficy Change Management is supprted nly n Windws perating systems. Only 32-bit Subversin is supprted r cmpatible in Prficy Change Management. Micrsft Visual SurceSafe 6.0d Build 31222 r later (Server installatin), r Visual SurceSafe 2005. Ntes The 6.0d versin can be acquired by installing the Micrsft Visual Studi 6 SP6 update. Fr mre details, visit Micrsft's web site at www.micrsft.cm. If Visual SurceSafe 6.0 is installed and yu want t upgrade t Visual SurceSafe 2005, yu must first uninstall Prficy Machine Editin, restart yur cmputer t avid ptential perating system crruptin, and then uninstall Visual SurceSafe 6.0. Yu can then install Visual SurceSafe 2005, and then reinstall Machine Editin. Uninstalling nly Visual SurceSafe 6.0 des nt remve it frm the cmputer because Machine Editin retains a cpy. 2017 General Electric Cmpany. *Indicates a trademark f the General Electric Cmpany r its subsidiaries
System Requirements Page 8 f 11 Subversin Repsitry The migratin f Prficy Change Management Visual SurceSafe (VSS) repsitry data t Subversin is NOT supprted. If yu want t migrate yur data and retain the revisin/histry infrmatin, please cntact GE Intelligent Platfrms. Micrsft retired Visual SurceSafe frm mainstream supprt n July 10, 2012 with extended supprt ending n July 11, 2017. If yu are currently using VSS, yu can cntinue t d s, and can use this DVD t install the latest SIMs fr Prficy Change Management. Supprt f Subversin (SVN) as a repsitry is new t this versin f Prficy Change Management. Belw is a set f steps detailing a sample install and setup f SVN as the Prficy Change Management repsitry. Example SVN Installatin The fllwing prcedure utlines the steps required t implement SVN as the Prficy Change Management repsitry. SVN is the Apache Subversin package fr Windws. This prcedure is a guideline fr demnstratin purpses nly and may differ frm the steps required when using ther server packages. 1. Install 32-bit SVN versin 1.8.3 (r greater). NOTE: The svnadmin and svnserve utilities are required. 2. Install the Prficy Change Management Server with SVN as yur repsitry. Fr mre infrmatin, see "T install the Prficy Change Management Server" in the Getting Started Guide. 3. Create a new SVN repsitry by pening a Windws cmmand prmpt, and then running svnadmin create [chsen path]; where [chsen path] is the lcatin f the SVN repsitry. We recmmend: C:\Prgram Files (x86)\prficy\prficy Machine Editin\fxManager\Server\SVN. NOTE: When yu try t use an MS-DOS cmmand that cntains a path statement, yu may receive an errr message if yu use a path statement that cntains spaces. T reslve this issue, place qutatin marks arund each path parameter that cntains a space. Fr example, svnadmin create "c:\prgram Files (x86)\testdirectry". 4. Perfrm the fllwing steps t cnfigure the newly created SVN repsitry. Fr example, please see the Example_Cnfig_SVN.zip file. a. Cnfigure the authz file t add a user accunt with the fllwing entry: fxmgrserver = rw. This file is lcated in the C:\Prgram Files (x86)\prficy\prficy Machine Editin\fxManager\Server\SVN\cnf flder. NOTE: Make sure that the cnf flder has read/write privileges. Als, be sure t include the [/] syntax t designate a new sectin. 2017 General Electric Cmpany. *Indicates a trademark f the General Electric Cmpany r its subsidiaries
System Requirements Page 9 f 11 b. Cnfigure the passwd file t add a passwrd fr the accunt yu just created with the entry, fxmgrserver = fxmgr. This file is lcated in the C:\Prgram Files (x86)\prficy\prficy Machine Editin\fxManager\Server\SVN\cnf flder. c. T set the SVN system lcatin fr username and passwrd infrmatin, cnfigure the svnserve.cnf file t specify the lcatin f the authrizatin and passwrd files. The svnserve.cnf file is lcated in the C:\Prgram Files (x86)\prficy\prficy Machine Editin\fxManager\Server\SVN\cnf flder. Under the [general]sectin, remve the cmments marker frm the fllwing lines: ann-access = nne passwrd-db = passwd authz-db = authz d. Create a batch file named pre-revprp-change.bat cntaining the text exit 0, and then add the batch file t the C:\Prgram Files (x86)\prficy\prficy Machine Editin\fxManager\Server\SVN\hks flder. 5. In the Windws cmmand prmpt, create a Windws service fr svnserve with the fllwing cmmand line: sc create SVNSERVE binpath= "\"C:\Prgram Files (x86)\subversin\bin\svnserve.exe\" --service --listen-prt 9999 -- cmpressin 0 --memry-cache-size 1024 --cache-txdeltas yes -r \"C:\Prgram Files (x86)\prficy\prficy Machine Editin\fxManager\Server\"" start= aut DisplayName= "SVNServer Service" NOTES: This path depends n where Subversin was installed. The escaped \* characters fund in the cmmand line are required t delimit the path as a parameter t the svnserve tl and svnserve itself. If yu cpy and paste this cmmand line t the Windws cmmand prmpt, yu may need t change the characters t real duble qutes if they are curled qutes in these instructins. 6. Run the Prficy Change Management ServerCnfig.exe file, which is lcated in the C:\Prgram Files (x86)\prficy\prficy Machine Editin\fxManager\Server flder, and then cnfirm r cnfigure the fllwing infrmatin. a. In the Server Descriptin field, enter the hstname f the cmputer. b. In the User Name field, cnfirm r enter fxmgrserver. c. In the Passwrd field, cnfirm r enter fxmgr. NOTE: The user name and passwrd can be changed in the SVN repsitry. They are lcated in the cnf/authz and cnf/passwd files. d. In the SVN Repsitry field, enter svn://<servername>:9999, where <servername> is the name f the server. IMPORTANT: Make sure that the <servername> is lwer case. 2017 General Electric Cmpany. *Indicates a trademark f the General Electric Cmpany r its subsidiaries
System Requirements Page 10 f 11 e. In the Rt Prject field, enter:/svn. (This is the last directry f the chsen path in step 3.) f. In the Wrking Flder field, select c:\. The wrking directry will be c:\fx. If this directry already exists, remve it first. 7. Cnfigure the Prficy Change Management Server service t depend n the SVN Server service, in additin t the standard RPCSS service using the fllwing cmmand. sc cnfig fxserver depend= RPCSS/SVNSERVE Supprted Prduct Mdules Belw is a list f custm prject supprt mdules included n the Change Management installatin DVD. A custm prject mdule is a grup f cnfiguratin files and scripts that let yu manage prjects f that prject type n a Change Management system. Yu must select the desired mdules when yu install the Change Management Server/Client system. Yu may als have t update certain files based n the cnfiguratin f yur system and netwrk. Prject Type Mdules CIMPLICITY: Versin 7.0 r higher. Engineering Wrkstatin: Versin 6.0 r greater. Prficy ifix: ifix 5.1, 5.5, r 5.8. LM9030: LgicMaster 90-30 prjects, versin 9.05. LM9070: LgicMaster 90-70 prjects, versin 7.05. Machine Editin: Versin 5.9 r greater. Micrsft Excel: Micrsft Excel TM *.XLS dcuments. Micrsft Wrd: Micrsft Wrd TM *.DOC dcuments. RSLgix 5, 500, and 5000: RSLgix 5 *.RSP files, RSLgix 500 *.RSS files (versins 7.10.00, 7.20.00, 7.30.00, and 8.10.00), r RSLgix 5000 *.ACD files (versin 15.01.00, 16.00.00, 18.00.00, 19.00.00, 21.00.00, 23.00.00, 24.00.00, 26.00.00, and 27.00.00). Change Management supprts bth the standard and prfessinal versins f RSLgix sftware. Siemens S7: Versins 5.3x and 5.4 SP1 and 5.4 SP4. Unity Pr XL: Versin 11.0 r greater. Thin Client Mdules RSLgix 5, 500, and 5000: RSLgix 5 *.RSP files, RSLgix 500 *.RSS files (versins 7.10.00, 7.20.00, 7.30.00, and 8.10.00), r RSLgix 5000 *.ACD files (versin 15.01.00, 16.00.00, and 18.00.00). Change Management supprts bth the standard and Prfessinal versins f RSLgix sftware. Siemens S7: Versins 5.3x and 5.4 SP1 and 5.4 SP4. Mdicn PrWORX32: Versin 2.0. 2017 General Electric Cmpany. *Indicates a trademark f the General Electric Cmpany r its subsidiaries
System Requirements Page 11 f 11 As-is Prject Type Mdules The fllwing prject types have nt been validated fr Prficy Change Management 5.90, 6.50, 7.00, 7.50, 8.00, 8.50, 8.60, 9.00, and 9.50. They are available as is: ABB Rbts: ABB Rbt device prgrams and cnfiguratin data files, S4C plus rbt cntrllers with Rbtware 4.0 Rev 70. Nte: While nly mdels listed abve are fully tested and supprted, this mdule shuld wrk with mst ABB Rbt hardware. AutCAD: AutCAD TM *.DWG files. Fanuc CNC: Fanuc CNC device prgrams and data files, PwerMate and CNC 16iM mdels nly. Ntes CNC 16iM mdels require CNC Executive versin B0F2/23 and FWLib versin 1.13.0.1. While nly mdels listed abve are fully tested and supprted, this mdule shuld wrk with mst Fanuc CNC hardware. Mdicn Cncept: Versin 2.6 Mdicn PrWORX: Mdicn PrWORXPLUS and Mdicn PrWORX NxT prjects, versin 2.20 SP6. Prcess Windws: Versin 2.x. Siemens 840D CNC: Siemens 840D CNC ARC files frm the archiving system in the CNC PCU (PC Unit). Siemens S5: Versin 7.2. Wnderware: Versin 9.0. 2017 General Electric Cmpany. *Indicates a trademark f the General Electric Cmpany r its subsidiaries