www.osram.us/flexlighting LINEARlight FLEX Accessories LED Modules Key Features & Benefits Easy assembly without soldering wires Assembly without tools Reduced assembly time Highly shock resistant These accessories simplify the installation process of the LINEARlight FLEX modules by eliminating the need to solder wires and provides an easy to use track system. Accessories Compatible with the following LINEARlight FLEX products: Indoor Outdoor LF1200 to LF4000 LFP1200 LF400 LFP400 LF800S Colormix Protect Colormix Application Information Applications Connect system for LINEARlight FLEX modules Technical Features Input Connector for connection of module to power supply Termination Cap for additional cutting possibilities Board to Board Connector for connection of one board to another with the total strip length up to 1 full reel Backside of Termination Cap is self-adhesive LED142R4 9-17
Ordering Information Track Accessories 72356 LAC-T/STS/7FT LF-LTS-2100 6.9' aluminium track 83 40 1 72357 LAC-M/STS/CLIP LF-LTS-MB Optional mounting bracket for track 1.1 280 35 72360 LAC-T/STS-COV/C/7FT LF-LTS-COVER-CLEAR 6.9' clear cover for track 83 40 1 72358 LAC-T/STS-COV/D/7FT LF-LTS-COVER-DIFFUSE 6.9' diffused cover for track 83 40 1 72359 LAC-S/STS/ENDCAP LF-LTS-ENDCAP End cap used only with 72358 0.8 160 20 72361 LAC-T/STS-COV/SP/7FT LF-LTS-COVER-SHORTPITCH 6.9' diffused cover specifically 83 40 1 designed for short pitch product 0.4 (9.7) 0.6 (14.7) 72356 68.9 (1750) 13.8 (350) 0.2(4.4) 0.04(1) 0.7(18.8) 72357 1.3(34) 0.4(10) 0.2 (5.3) 0.7 (17.7) 72360 0.9 (24) 72358 0.7 (17.7) 0.9 (23.2) 0.8 (20) 0.8 (20.2) 72359 0.4 (10.5) 0.7 (17.7) 72361
Ordering Information White Indoor Accessories 57101 FXSC08G2CT2PF0500 LF-2PIN Flex SC 2 pin input connector 20 280 20 57103 FXSC08G2CT4PJ LF-CONN FLEX SC Board to board connector piece 0.35 1250 20 71428 LAC-C/TP/TERMCAP LF-2TERM FLEX Termination cap 200 10 72947 LF-WIRE-30 FLEX SC LF-WIRE-30 FLEX SC 30mm connector wire 1.1 10,000 100 72948 LF-WIRE-150 FLEX SC LF-WIRE-150 FLEX SC 150mm connector wire 5.9 5000 50 0.2 (6) 0.16 (4.2) 57101 19.7 (500) 0.4 (9) 0.2 (6) 0.16 (4.2) 57103 0.6(16.1) 71428 0.5(13.5) 72947 5.9 (150) 72948
Ordering Information Colormix Indoor Accessories 72618 57102 FXSC08G2CT4PF0500 LF-4PIN FLEX SC 4 pin input connector 20 280 20 57103 LF-CONN FLEX SC LF-CONN FLEX SC Board to board connector piece 0.35 1250 20 72947 LF-WIRE-30 FLEX SC LF-WIRE-30 FLEX SC 30mm connector wire 1.1 10,000 100 72948 LF-WIRE-150 FLEX SC LF-WIRE-150 FLEX SC 150mm connector wire 5.9 5000 50 0.2 (6) 0.16 (4.2) 57102 19.7 (500) 0.4 (9) 0.2 (6) 0.16 (4.2) 57103 72947 5.9 (150) 72948
Ordering Information Colormix Protect Accessories 72362 LAC-C/IP67/ENDCAP LF-ENDCAP PROTECT Used to seal Protect product end when cut 100 10 72363 LF-CLIP-FIXTURE LAC-M/IP67/CLIP Optional flexible mounting bracket 500 50 72365* LAC-C/IP67/IC/4P/20IN LF-4PIN PROTECT IP67 Input connector 20 50 5 72366 LAC-C/IP67/BB/4P/7IN LF-4CONN PROTECT IP67 Board to board connector 7 50 5 *Every Protect module reel comes with one pre-wired input connector and install guide. 0.5 (13.6) 0.4 (9.5) 0.3 (8.4) 72362 0.6 (15.2) 72363 0.2 (5.7) 1.1 (27) 2 (6) 20 (506.5) 0.8 (19.8) 72365 18.8 (476.4) 4.7 (120) 0.5 (13.4) 0.7 (18.7) 72366 7.1 (179.8) 0.5 (12.7)
Ordering Information White Protect Accessories 72667 LF/ENDCAP/IP67/LP LF-ENDCAP IP67 LP Used to seal Protect product end when cut 100 10 72363 LF-CLIP-FIXTURE LAC-M/IP67/CLIP Optional flexible mounting bracket 500 50 72669* LF/2PIN/IP67/LP LF-2PIN IP67 LP Input connector 20 50 5 72668 LF/2CONN/IP67/LP LF-2CONN IP67 LP Board to board connector 7 50 5 *Every Protect module reel comes with one pre-wired input connector and install guide. 0.5 (13.6) 0.4 (9.5) 0.3 (8.4) 72667 0.6 (15.2) 0.2 (5.7) 1.1 (27) 2 (6) 72363 20 (506.5) 0.8 (19.8) 72669 18.8 (476.4) 4.7 (120) 0.5 (13.4) 0.7 (18.7) 72668 7.1 (179.8) 0.5 (12.7) Safety Information 1. All components of the Connect System must be assembled to avoid any stress on the wires and/or board connectors. The installer must ensure that there is adequate strain relief between the board connection and the wiring. 2. Installation of LED modules (with power supplies) shall be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. 3. The connector has no inverse polarity protection. There will be no electrical function if connector is not well positioned or if polarity is inversed. Several modules can be damaged. 4. The maximum operation current may not be exceeded. Assembly Information 1. Pay attention to the correct polarity between input connector and LED module: For the input connector, connect the black cable to the - pole and the red cable to the + pole of the module. 2. Particular attention is required when using the connector for board to board connection: The + pole of the first board has to be connected to the + pole of the second board. In case of wrong polarity no light will be emitted and the modules can be damaged. 3. The Termination Cap can be used at any section cut point intended for it. These points are marked on the module. OSRAM SYLVANIA Inc. 200 Ballardvale Street Wilmington, MA 01887 USA 877-636-5267 ds.info@osram.com www.osram.us/ds OSRAM and LINEARlight FLEX are registered trademarks of OSRAM GmbH. Specifications subject to change without notice. 2017 OSRAM SYLVANIA Inc.