I6H Series (Pre-liminary)

Industrial Grade Half Slim SATA III MLC SSD I6H Series (Pre-liminary) RD-S302MMN-MXXX5 Ver:A1 Apr:2016 NOTE: RECADATA RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE. ALL PRODUCT SPECIFICATIONS ARE PROVIDED FOR REFERENCE ONLY. THIS DOCUMENT AND ALL INFORMATION DISCUSSED HEREIN REMAIN THE SOLE AND EXCLUSIVE PROPERTY OF RECADATA. NO LICENSE OF ANY PATENT, COPYRIGHT,MASK WORK,TRADEMARK OR ANY OTHER INTELLECTUAL PROPERTY RIGHT IS GRANTED BY ONE PARTY TO THE OTHER PARTY UNDER THIS DOCUMENT,BY IMPLICATION,ESTOPPELS OR OTHER-WISE.

I6H Series Industrial Grade Half Slim SATAIII MLC SSD 64GB to 512GB 1. Feature Summary Form Factor: Half Slim SATAIII SSD Size : 54x39x5mm Weight: 10 g Capacity(GB): 64GB to 512GB Flash Type: MLC Nand Flash Sequential Read/Write (MB/S) :530/450(Max) Random IOPS Read/Write @4KB: 71K/73K(Max) Support S.M.A.R.T, NCQ, Windows Trim Command Power Management Voltage : 5V±5% Power (Active/Idle) :4.5W/0.6W Environmental Vibration: 1500G/0.5ms Shock: 20G(10 ~2000 HZ) Humidity :5% ~ 95% (noncondensable) Working Temp.: -40 to +85 Storage Temp.: -55 to +95 Reliability MTBF: 2,000,000 Hours Data Retention: 5 Years TBW(512GB): 1180TB Key Features Large capacity with 512GB Half Slim SATAIII option Fast Secure Erase optional(sw/hw triggered ) Overvoltage and short-circuit protection Conformal Coating optional Power Fail Protection 2

2. Contents 1 Feature Summary... 2 2 Contents... 3 3 Order Information... 5 3.1 Part Number Decoder... 5 3.2 Current Standard Part Number... 6 3.3 Offered OEM Options... 7 4. Product Specification... 7 4.1Physical Dimensions... 8 4.2Interface... 9 4.3Capacity... 9 4.4Performance... 9 4.5Environmental Specification... 10 4.5.1 Temperature... 10 4.5.2 Shock... 10 4.5.3 Vibration... 10 4.5.4 Humidity... 11 4.6 Reliability... 11 4.6.1 MTBF... 11 4.6.2 ECC (Error Correction Code)... 11 4.6.3 Data Retention... 11 4.7 Endurance... 12 4.7.1 TBW (Total Bytes Written)... 12 4.7.2 Write Endurance... 12 4.7.3 Wear-leveling... 13 4.8 Secure Erase... 13 3

5. Electric Specification... 14 5.1 Pin Descriptions... 14 5.1.1 Pin Assignment... 14 5.2 Electrical Characteristics... 15 5.2.1 Absolute Maximum Rating... 15 5.2.2Power Supply Operation Conditions... 15 5.2.3 Power Consumption... 16 6. ATA Command Description... 16 6.1 ATA Command Set... 16 6.2 SMART Feature Set... 18 6.3 SMART Attributes... 19 7. Revision History... 20 4

3. Order Information 3.1 Part Number Decoder RD S3 18 M M N N 032 5 9. Sequential Read rate 8.Un-formatted capacity 7. Without SDRAM 6. Function Feature 5. Operation Temperature 4. Flash Type 3. Dimension 2. Interface 1. Manufacturer Number Character Description 1 RD RECADATA Storage Technology Co.,Ltd. S2 SATA II S3 SATA III P0 PATA 2 U2 USB 2.0 U3 USB 3.0 P2 PCI-e 2.0 P3 PCI-e 3.0 D0 SD 18 1.8inch 25 2.5inch 01 Micro SATA 02 MO297 (Half-slim) 3 03 CF Card 04 DOM 05 CFast 06 PCI-e 07 6U VPX 08 3U VPX 5

4 5 6 7 8 9 09 SD 50 m-sata 50mm M MLC S SLC T TLC D 3D M -40~85 I -20~70 C 0~70 E Customized N Normal Function (Standard Function) D Security Erase Function M External SDRAM N No external SDRAM 016 16GB 032 32GB 064 64GB 128 128GB 256 256GB 512 512GB 01T 1TB 02T 2TB 0 <100MB/s 1 100MB/s 2 200MB/s 3 300MB/s 4 400MB/s 5 500MB/s Table 1 Product numbering scheme 3.2 Current Standard Part Number The RECADATA I6H Series MLC SSD standard Part Numbers are listed below: Table2 Part Number List Capacity Part Number 64GB RD-S302MMN-M0645 128GB RD-S302MMN-M1285 256GB RD-S302MMN-M2565 6

512GB RD-S302MMN-M5125 3.3 Offered OEM Options Customer Specified Drive ID (Strings) Option Preload Services (also drive images with any file system) Option Fast Secure Erse By ATA Command or Jumper Option Physical Destruction Option AES256 Encryption Option 4. Product Specification The RECADATA Half-Slim SATA MO-297 SSD modules are ideal solutions for embedded applications requiring Solid State storage in smaller, removable form factor. It is specially designed for all industrial and High-end embedded applications requiring high data transfer and high reliability. The I6H Series uses the latest MLC generation flash technology with a powerful controller architecture which provides the best price/performance ratio. It can provide a much larger capacity up to 512GB and extreme SATA III Performance up to 530/450 MB/S(MAX) sequential read/write speed and 71,000/73,000(MAX)IOPS with 4KB random access. Additionally, it also provides Fast Secure Erase, AES256 Encryption and Physical Destruction methods as well as support for S.M.A.R.T to meet customized security applications needs. 7

4.1Physical Dimensions Table3 Physical Dimensions and Weight Parameter Value Length 54+0.2 mm width 39+0.2 mm height 5+0.2 mm Figure1 I6H Series Physical Dimensions 8

4.2Interface The interface of RECADATA I6H Series complies with the standard Serial ATA version 3.1: 1. Host Transfer Rate is 6.0Gb/s 2. PIO mode 0,1,2,3,4 3. DMA mode 0,1,2 4. UDMA mode 0,1,2,3,4,5,6 4.3Capacity Table 4 Capacity Specification Capacity Total Byte(User) Max LBA 64GB 63,350,767,616 123,731,968 128GB 126,701,535,232 247,463,936 256GB 253,403,070,464 494,927,872 512GB 506,806,140,928 989,855,744 4.4Performance Table 5 Maximum Transfer speed Data Transfer SSD Volume Max Read Max Write Unit 64GB 425 77 Sequential 128GB 530 200 Rate 256GB 520 320 MB/S 512GB 530 450 Notes: 1. Test Environments: Intel I5-3470 CPU Dual Core, B75 Motherboard, 4GB DDR3 RAM, Windows 7 Pro SP1 2. Benchmarking program: CrystalDiskMark V3.0.1 Table 6 Maximum Random IOPS Data Transfer SSD Volume Max Read Max Write 64GB 39K 19K IOPS 128GB 70K 49K Random Rate 256GB 70K 72K 512GB 68K 73K 9

Notes: 1. Test Environments: Intel I5-3470 CPU Dual Core, B75 Motherboard, 4GB DDR3 RAM, Windows 7 Pro SP1 2. Benchmarking program: CrystalDiskMark V3.0.1 4.5Environmental Specification 4.5.1 Temperature Table 7 Temperature Parameter Value Unit Operating -40 to 85 Non-operating -55 to 95 Notes: 1. Test environment: High/low Temperature testing chamber at Recadata. 2. Operating Test Duration: 4 hour at every temperature(-40,+85 ) 3. Test Items: Cold-start at -40 and Burn-in-test at +85 4.5.2 Shock Table 8 Shock Specifications Parameter Acceleration Force Unit Operating 1500 G Notes: 1. Test pluse shape: half sin 2. Test duration: 0.5ms 4.5.3 Vibration Table 9 Vibration Specifications Parameter Acceleration Force Unit Operating 20 peak G Notes: 1. 20~20 KHZ Vibration 10

4.5.4 Humidity Table 10 Humidity Specifications Parameter Acceleration Force Unit Operating 5 to 95 % Notes: 1. Test duration: 24hours 2. Test methods: Samples not all products are selected to be tested. 3. Test environments: at the third party 4.6 Reliability 4.6.1 MTBF Table 11 MTBF Specifications Parameter Value (Hours) MTBF 2,000,000 4.6.2 ECC (Error Correction Code) Table 12 ECC ECC BCH ECC Value (bits) 66 bits in 1024bytes 4.6.3 Data Retention Table 13 Data Retention Data Retention Data Retention @ 25 Value (years) 5 years 11

4.7 Endurance 4.7.1 TBW (Total Bytes Written) The RECADATA I6 Series MLC SSD is provided with 2 years warranty for common application except abuse data input. The lifetime also depends on the TBW based on SSD capacity. SSD capacity 0.92 Flash write cycle Endurance improvement ratio TBW= 1000 Risk ratio Note: (1) The Flash write cycles is referred as the flash datasheet and based on recycling mechanism or data protection mechanism; (2) The Endurance improvement ratio is referred as the write cycles improvement through ECC algorithm; (3) The Risk ratio is referred as the risk ratio the SSD manufacturer can accept within lifespan. Normally it is 2 in SSD industry standards; α: SSD total capacity β: Flash average writing times, RECADATA MLC NAND FLASH Write times is 5000. The details can be referred to in flash datasheet. γ: Data amplification ratio, the less it is, the more the lifespan of SSD is. Rana-M s ratio is 0.3. α * β lifespan γ * δ δ:the data input volume every day. Table 14 TBW Capacity TBW 64GB 88.5 128GB 295 256GB 590 512GB 1180 4.7.2 Write Endurance Table 15 Endurance Endurance Write Eudurance@100GB write/day Value (bits) 16 years (256GB) 12

Read Endurance unlimited 4.7.3 Wear-leveling RECADATA s SSD support both dynamic and static wear-leveling. These two algorithms guarantee all type of flash memory at same level of erase cycles to improve lifetime limitation of NAND based storage. 4.8 Secure Erase Generally, The RECADATA I6 Series Industrial Grade 2.5 SATA III MLC SSD provides two types of destruction methods: Fast Secure Erase (by software) and Physical Destruction (by hardware) Different users prefer different modes according to the applications requirements. 1. Fast Secure Erase 1) ATA Command Trigger: The Secure Erase function can also be trigger by Host ATA Command directly. 2) Jumper (2Pin short) Trigger: a) Connect the RECADATA SSD with power supply, the external LED light is OFF ; b) Press down the destruction button, the external LED light turns ON, the self-destruction function is triggered if the pressing LED time is longer than 3 seconds,but it will resume status a) if the pressing LED time is less than 3 seconds. c) When the self-destruction starts, The external LED light turns twinkling until the destruction process is completed, and it will execute destruction command continuously until the user data is totally destroyed if any power fail during the destruction period and the SSD is powered up again; d) Once the Fast Secure Erase process is totally completed, The External LED light turns OFF Note: 13

a) Power (supply) is the only key to trigger secure erase process; SATA Signal is not related in this Jumper trigger mode. b) Destroy the data stored on the Flash memory and all data in the SSD is erased, however the SSD can be used again after initialization. 3) Physical Destruction A momentary higher voltage is produced by the onboard circuit to destroy the flash storage medium.the SSD can t be used again if the hardware is destroyed; Note: 1:The higher voltage is required +28V while the Power Consumption is no less than 200W. 2:The SSD will become burned hot with smoke during the physical destruction period, please don t touch it. 5. Electric Specification 5.1 Pin Descriptions 5.1.1 Pin Assignment Figure2 Pin Locations Table 16H Half Slim SATA interface Pin assignment 14

Pin Name Description Pin Name Description S1 GND 2nd mate P5 GND 2nd mate S2 A+ Differential signal pair A S3 A- From physical layer P7 V5 5v power, pre-charge, 2nd electronics P6 GND 2nd mate mate S4 GND 2nd mate P8 V5 5v power S5 B- Differential signal pair B S6 S7 P1 P2 P9 V5 5v power B+ From physical layer P10 GND 2nd mate electronics GND 2nd mate P11 DAS Device activity signal (not V28 used) V28 Physical Destroy Voltage P13 SEO Security Erase Indicator Input P12 GND 1st mate Output P3 V28 P14 SEI Security Erase Trigger Input P4 GND 1st mate P15 V12 12v power (not used) 5.2 Electrical Characteristics 5.2.1 Absolute Maximum Rating Table 17 Absolute maximum rating Parameter Symbol Condition Min Max Unit Storage temperature TSGT -55 95 Input Power Voltage VIN -0.3 6.5 V 5.2.2Power Supply Operation Conditions Table 18 recommended power supply operation conditions Parameter Symbol Condition Min Max Unit Input Power Voltage VIN 4.75 5.25 V 15

5.2.3 Power Consumption Recommended DC operation voltage: 4.75~5.25V Table 19 power consumption Parameter Typical Unit Idle W Sequential read W 4KB sample data 512KB sample data Sequential write W Random read W Random write W Sequential read W Sequential write W Random read W Random write W Note: 1. the power consumption can differ depending on the disk capacity and the type of flash memory being used. 2. The test drive: I6H-M512 3. Supply voltage: 5V 6. ATA Command Description 6.1 ATA Command Set Table 21 ATA commands list Command Code(Hex) Protocol General Feature Set Execute Device Diagnostic 90h Execute device diagnostic Flush Cache E7h Non-data Identify Device ECh PIO data-in Initialize Drive Parameter 91h Non-data Read DMA C8h DMA Read Log Ext 2Fh PIO data-in Read Multiple C4h PIO data-in Read Sector(s) 20h PIO data-in 16

Read Verify Sector(s) 40h or 41h Non-data Set Feature Efh Non-data Set Multiple Mode C6h Non-data Write DMA Cah DMA Write Multiple C5h PIO data-in Write Sector(s) 30h PIO data-out NOP 00h Non-data Read Buffer E4h PIO data-in Writer Buffer E8h PIO data-out Power Management Feature Set Check Power Mode E5h or 98h Non-data Idle E3h or 97h Non-data Idle Immediate E1h or 95h Non-data Sleep E6h or 99h Non-data Standby E2h or 96h Non-data Standby Immediate E0h or 94h Non-data Security Mode Feature Set Security Set Password F1h PIO data-out Security Unlock F2h PIO data-out Security Erase Prepare F3h Non-data Security Erase Unit F4h PIO data-out Security Freeze Lock F5h Non-data Security Disable Password F6h PIO data-out SMART Feature Set SMART Disable Operations B0h Non-data SMART Enable/Disable Auto-save B0h Non-data SMART Enable Operations B0h Non-data SMART Execute OFF-LINE Immediate B0h Non-data SMART Read Log B0h PIO data-in SMART Read Threshold B0h PIO data-in SMART Read Data B0h PIO data-in SMART Return Status B0h Non-data SMART Save Attribute Values B0h Non-data SMART Write Log B0h PIO data-out Host Protected Area Feature Set Read Native Max Address F8h Non-data Set Max Address F9h Non-data Set Max Set Password F9h PIO data-out Set Max Lock F9h Non-data Set Max Freeze Lock F9h Non-data 17

Set Max Unlock F9h PIO data-out 48-bit Address Feature Set Flush Cache Ext Eah Non-data Read Sector(s) Ext 24h PIO data-in Read DMA Ext 25h DMA Read Multiple 29h PIO data-in Read Native Max Address Ext 27h Non-data Read Verity Sector(s) Ext 42h Non-data Set Max Address Ext 37h Non-data Write DMA Ext 35h DMA Write Multiple Ext 39h PIO data-out Write Sector(s) Ext 34h PIO data-out NCQ Feature Set Read FPDMA Queued 60h DMA Queued Write FPDMA Queued 61h DMA Queued Others Data Set Management 06h DMA Seek 70h Non-data 6.2 SMART Feature Set The SSD controller supports the SMART command set and defines some vendor-specific data to report spare/bad block numbers in each memory management unit. Table 22: SMART Feature Register Values Value Command Value Command D0h Read Data D5h Read Log D1h Read Attribute Threshold D6h Write Log D2h Enable/Disable Autosave D8h Enable SMART Operations D3h Save Attribute Values D9h Disable SMART Operations D4h Execute OFF-LINE Immediate DAh Return Status If the reserved size is below the threshold, the status can be read from the Cylinder Register using the Return Status command (DAh). The following 512bytes make up the SMART data structure. Users can obtain the data using the Read Data command (D0h). Table 23 SMART data structure Byte F / V Description 0-1 X Revision code 2-361 X Vendor specific 18

362 V Off-line data collection status 363 X Self-test execution status byte 364-365 V Total time in seconds to complete off-line data collection activity 366 X Vendor specific 367 F Off-line data collection capability 368-369 F SMART capability 370 F Error logging capability 7-1 Reserved 371 X Vendor specific 0 1=Device error logging supported 372 F Short self-test routine recommended polling time(in minutes) 373 F Extended self-test routine recommended polling time (in minutes) 374 F Conveyance Self-test routine recommended polling time (in minutes) 375-385 R Reserved 386-395 F Firmware version / data code 396-399 F Vendor specific 400-408 F Reserved 409-415 X Vendor specific 416-417 F Reserved 418-419 V Number of spare block 420 F Reserved 421-422 V Average erase count 423 F Reserved 424-425 V Max erase count 426 F Reserved 427-428 V Min erase count 429-510 X Vendor specific 511 V Data structure checksum Notes: 1. F=content (byte) is fixed and does not change. 2. V=content (byte) is variable and may change depending on the state of the device or the commands executed by the device. 3. X=contents (byte) is vendor specific ad may be fixed or variable. 4. R=content (byte) is reserved and shall be zero. 6.3 SMART Attributes The following table defines the vendor specific data in byte 2 to 381 of the 512-byte 19

Attribute ID(hex) I6H Series SMART data. Table 24SMART Attribute Raw Attribute Value 01 MSB 00 00 00 00 00 Read error rate Attribute Name 05 LSB MSB 00 00 00 00 Reallocated sectors count 09 LSB MSB 00 00 Reserved 0C LSB MSB 00 00 Power cycle count A0 LSB MSB 00 00 Uncorrectable sector count when read/write A1 LSB MSB 00 00 00 00 Number of valid spare block A2 LSB MSB 00 00 00 00 Number of cache data block A3 LSB MSB 00 00 00 00 Number of initial invalid block A4 LSB MSB 00 00 Total erase count A5 LSB MSB 00 00 Maximum erase count A6 LSB MSB 00 00 Minimum erase count A7 LSB MSB 00 00 Average erase count C0 LSB MSB 00 00 Power-off retract count C2 MSB 00 00 00 00 00 Controller temperature C3 LSB MSB 00 00 Hardware ECC recovered C4 LSB MSB 00 00 Reallocation event count C7 LSB MSB 00 00 00 00 Ultra DMA CRC error count F1 LSB MSB 00 00 Total LBAs written (each write unit = 32MB) F2 LSB MSB 00 00 Total LBAs Read (each read unit = 32MB) 7. Revision History Table24 Document Revision History Date Revision Description Dec.,2014 A0 Official Release Apr.,2016 A1 Update Format 20