TECHNICAL GUIDE M LOEWEN MULTISLIDE

TECHNICAL GUIDE M LOEWEN MULTISLIDE

LOEWEN MULTISLIDE LOEWEN MULTISLIDE STANDARD FEATURES Standard panel heights up to feet Standard panel widths up to 5 feet; custom sizes available Natural Douglas Fir interior (no visible finger joints) Low E insulated tempered glazing 2 1/4" (58 mm) thick sliding panels Extruded aluminum cladding in 15 standard colors Standard bronze anodized sill with built in drainage system Metal clad jamb fillers and frame cladding match clad door panels GLASS & GLAZING A wide variety of glazing options available including triple glazed Heat-Smart Double, Heat-Smart Triple, and Tranquility. Exterior Simulated Divided Lites options available in Putty, Ogee and Square. Interior SDL and stops options include Ogee, Square and Putty M3 MULTISLIDE doors provide large dramatic openings for the transition from indoor and outdoor living spaces. With an easy, smooth and quiet operation, using stainless steel tracks, MultiSlide interlocking sliding panels provides secure and weatherproof options in large openings. A large selection of custom configurations and design options are available, including bi-parting and hidden pocketing. Loewen narrow stile and rail panels provide a contemporary look with a narrow stile 2 /8 face width. This width is narrower than many sliding door programs while still incorporating an available flush handle and multipoint locking mechanism. Also available in the wide 4 5/16 stile. The panel construction, using authentic Loewen door components, results in a cohesive aesthetic with other Loewen product lines. Our unique 2 ¼ thick panel adds superior thermal performance, as well as strength and durability. The high structural integrity and raised threshold options allow MultiSlide doors to be located in areas of moderate to high exposure where homeowners want a broad view with no visual interference mountain, hillside or lake-front vistas. Multi track thermally broken frame and sill is available in raised sill with no riser, 1 1/8 riser and 1 1/2 riser for best performance. Doors can be clad in a variety of colors from the extensive Loewen palette, and are available in Douglas Fir or in Mahogany interiors. HARDWARE Multipoint locking door handles are available in a variety of styles and finishes. See section A. Exterior pull HARDWARE SAMPLE CONFIGURATIONS STACKING POCKETED 0XX X 0XXX XX 0XXXX XXX 0XXXXXXX XXXXXXX 0X - X0 X - X 0XX - XX0 XX - XX 0XXX - XXX0 XXX - X = Operating Multipoint handle system 0=Fixed Multiple hardware type and finish choices are available. See section A. SIMULATED DIVIDED LITES (SDL) Ogee Profile. Putty Profile. Square Profile (interior only) TRACK ASSEMBLY P=Pocket Available in bronze anodized finish only. Multi track thermally broken frame and sill is available in raised sill with no riser, 1 1/8 riser and 1 1/2 riser. STANDARD FEATURES METAL CLAD COLOR SPECTRUM Stacking: 8 panels max (left or right in a single direction) Standard and Architectural Palette colors. Bi-Parting: 4 panels left, 4 panels right (8 in total) Pocket: max 8 panels stacking or bi-parting www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE M2 Flush handle

LOEWEN MULTISLIDE: NARROW STILE - STACKING Easy glide low resistant movement 48 3/16 [12] 69 3/8 [162] 2 1/8 [1859] 5 1/4 [264] 8 /16 [351] 11 9/16 [4358] 204 3/4 [5201] 23 /8 [42] 21 [68] 3/16 [3052] 1 5/16 [4504] 234 1/2 [595] " [341] 4 3/16 [1199] 68 3/8 [] 1 1/8 [180] 4 1/4 [2649] /16 [3492] 9/16 [4333] 203 3/4 [516] 2 /8 [1] 20 [6859] 119 3/16 [302] 16 5/16 [449] 233 1/2 [5932] [315] Panel 59 /16 [15] MultiSlide raised sill track 19 3/8 [492] 22 3/8 [569] 25 3/8 [645] X X XX XX XXX XXX XXXX XXXX XXXXX XXXXX X X XX XX [14] X X XX XX XXX XXX XXXX XXXX XXXXX XXXXX X X XX XX 8 3/16 [38] X X X X XX XX XX XX XXX XXX XXX XXX XXXX XXXX XXXX XXXX XXXXX XXXXX XXXXX XXXXX X X X X XX XX XX XX SPECIFICATIONS [243] X X XX XX XXX XXX XXXX XXXX XXXXX XXXXX X X XX XX M4 www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE STANDARDS Most units have been tested by an independent laboratory for air and water infiltration, structural performance and thermal performance. PANEL Manufactured from Coastal Douglas Fir kiln-dried lumber. The entire Loewen product line is also available in optional Mahogany or optional chain of custody certified Douglas Fir (SCS-COC-005141). PRESERVATIVE TREATED All wood parts are dipped in approved low VOC preservative. DOOR PANELS Opening panel is equipped with two sets of adjustable ball bearing tandem rollers. Sash is 2 1/4" (58 mm) thick for extra strength and durability. GLAZING With countless glazing configurations and Low E coating options, we ensure that you can choose the perfect blend of protection and comfort. INSULATING GLASS Double or triple insulating tempered glass configuration, with 1/2" ( mm) airspace. HEAT-SMART SYSTEMS Heat-Smart best describes the benefits of the product that incorporates Low E coating and argon gas. Heat-Smart systems help reduce heating and cooling costs, providing superior energy efficiency. SIMULATED DIVIDED LITES (SDL) Standard SDL complete with airspace grilles. Grille bars are permanently applied to the interior and exterior. METAL CLADDING Heavy duty exterior metal cladding comprised of extruded aluminum is available in a variety of Standard and Architectural Palette colors. Interior of door can be natural wood, unfinished or primed. Metal clad units are supplied ready-to-install complete with optional metal nailing flange. SILL TRACK Extruded metal sill with stainless steel cap over operating track for ease of operation and long-lasting performance. An internal weep system with drainage holes keeps water out of the interior trough. HARDWARE Multi-point locking hardware, in patio and flush handle styles. The locking hardware is also available in several optional finishes. Stainless steel roller assemblies are optional. Maximum Width - ' X X XX XX XXX XXX XXXX XXXX XXXXX XXXXX X X XX XX M5 www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE

LOEWEN MULTISLIDE: WIDE STILE - STACKING LOEWEN MULTISLIDE: STACKING - DOOR DETAIL HEAD & SILL DETAIL OPTIONAL RISERS 46 5/8 [11] 66 1/4 [1683] 0 5/8 [194] 2 1/4 [259] 3 /8 [3401] 165 1/2 [4204] 19 3/16 [5008] 228 3/4 [5811] 2 /16 [6614] 118 5/8 [30] 14 1/4 [4426] 229 /8 [5839] 285 1/2 [252] 45 5/8 [1159] 65 1/4 [1658] 69 5/8 [169] 1 1/4 [252] 2 /8 [335] 164 1/2 [419] 1 3/16 [4982] 22 3/4 [586] 259 /16 [6589] 11 5/8 [2988] 1/4 [4401] 228 /8 [5814] 2 1/2 [22] Panel 19 3/8 [492] 22 3/8 [569] 25 3/8 [645] [14] [981 [1591 X X X X XX XX XX XX XXX XXX XXX XXX XXXX XXXX XXXX XXXX XXXXX XXXXX XXXXX XXXXX X X X X XX XX XX XX PLAN VIEW METAL CLAD - NARROW STILE () METAL CLAD - WIDE STILE () GLAZING STOP PROFILES 8 3/16 [2201 [2505 [38] X X X X XX XX XX XX XXX XXX XXX XXX XXXX XXXX XXXX XXXX XXXXX XXXXX XXXXX XXXXX X X X X XX XX XX XX DOUBLE [28 [243] X X XX XX XXX XXX XXXX XXXX XXXXX XXXXX X X XX XX M6 X X XX XX XXX XXX XXXX XXXX XXXXX XXXXX X X XX XX M www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE Maximum Width - ' METAL CLAD - NARROW STILE () METAL CLAD - WIDE STILE () TRIPLE www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE Note: Drawings shown are typical details. The preparation of the rough opening for large openings such as those required by, but Additional sizes and configurations available. not limited to, LiftSlide, Bifold and MultiSlide doors have unique requirements. Structural Screen options may be available depending on size and configuration. headers that allow for deflection no greater than 1/8 along the unsupported length once All dimensions to have +/- 1/16" (2 mm) tolerance. O = Fixed the header is fully loaded are required. Special care needs to be taken when installing any unit including transoms above such large Loewen is not responsible for site measurements or the determination of structural and architectural requirements for the installation of large opening products such as but not limited to, Liftslide, Bifold and MultiSlide doors. Site specifications are the responsibility of

LOEWEN MULTISLIDE: NARROW STILE - STACKING with POCKET LOEWEN MULTISLIDE: WIDE STILE - STACKING with POCKET 52 15/16 [44] 4 1/8 [1883] 6 /8 [1953] 1 [295] 143 3/16 [] 16 5/16 [448] 209 /16 [5320] 2 5/8 [6162] 25 3/4 [004] [341] 1 /8 [312] 182 1/16 [4625] 239 1/4 [6] [341] 52 15/16 [44] 2 9/16 [14] 6 /8 [1953] 1/2 [256] 140 1/8 [35] 16 5/16 [448] 203 3/8 [5166] 235 1/16 [590] 266 11/16 [64] [341] 1 /8 [312] 180 9/16 [4586] 2 3/16 [00] [341] 51 15/16 [19] 1 9/16 [1818] 5 /8 [192] 9 [269] 142 3/16 [11] 15 5/16 [4533] 208 /16 [5295] 1 5/8 [6] 24 3/4 [699] [215] 123 /8 [314] 181 1/16 [4599] 238 1/4 [51] [315] 51 15/16 [19] 1 9/16 [1818] 5 /8 [192] 1/2 [230] 1 [3534] 15 5/16 [4533] 202 3/8 [5141] 234 1/16 [5945] 265 11/16 [648] " [315] 123 /8 [314] 19 9/16 [45] 235 3/16 [594] [315] Framed Rough Opening 2 /8" [09] 49 1/8 [1] 39 /8 [] 3 1/16 [1855] 6 3/16 [269] 9 5/16 [3539] 12 1/2 [4381] 205 5/8 [5223] 238 3/4 [65] 254 1/4 [645] 63 /8 [1623] 121 1/16 [305] 18 1/4 [452] 229 1/2 [5829] Framed Rough Opening 2 /8 [09] 4 9/16 [8] 39 /8 [] 1 1/2 [1816] 3 1/8 [2620] 9 1/16 [3539] 166 3/8 [4226] 198 1/16 [5030] 229 11/16 [5834] 253 [645] 63 /8 [1623] 119 1/2 [30] 15 3/16 [4450] 228 9/16 [5805] Panel 33 3/4 [858] 58 1/2 [148] Panel 3 [858] 59 /16 [15] Pocket 16 [406] 19 [483] 22 [559] 25 [635] Pocket 16 [406] 19 [483] 22 [559] 25 [635] [18] 19 3/8 [492] 22 3/8 [569] 25 3/8 [645] [18] [18] 19 3/8 [492] 22 3/8 [569] 25 3/8 [645] [18] [14] X X X X X X XX XX XX XX XXX XXX XXXX X XXXX X XXXXX XXXXX XXXXXXX XX XX XXXX XXXXX XXXXX XXXXXXX XX XX XXXX X X X X XX XX XX XX XXX XXX [14] X X X X X X X X XX XX XX XX XXX XXX XXXX X XXXX X XXXXX XXXXXX XXXXXXX XX XXX XXXX XXXXX XXXXXX XXXXXXX XX XXX XXXX X X X X XX XX XX XX XXX XXX 8 3/16 XX XX XXX XXXX X XXXXX XXXXX XXXXXXX XX XX XXXX X X XX XX XXX 8 3/16 X X XX XX XXX XXXX X XXXXX XXXXXX XXXXXXX XX XXX XXXX X X XX XX XXX M8 [38] XX XX XXX XXXX X XXXXX XXXXX XXXXXXX XX XX XXXX X X XX XX XXX [38] X X XX XX XXX XXXX X XXXXX XXXXXX XXXXXXX XX XXX XXXX X X XX XX XXX M9 www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE [243] Maximum Width - ' XX XX XX XX XXX XXX XXXX X XXXX X XXXXX XXXXX XXXXXXX XX XX XXXX XXXXX XXXXX XXXXXXX XX XX XXXX X X X X XX XX XX XX XXX XXX [243] Maximum Width - ' X X X X XX XX XX XX XXX XXX XXXX X XXXX X XXXXX XXXXXX XXXXXXX XX XXX XXXX XXXXX XXXXXX XXXXXXX XX XXX XXXX X X XX XX XX XX XXX XXX XXXX X www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE

LOEWEN MULTISLIDE: STACKING with POCKET - DOOR DETAIL HEAD & SILL DETAIL LOEWEN MULTISLIDE: NARROW STILE - BI-PARTING 93 /8 [23] 1 3/16 [3459] 141 3/4 [00] 208 [5283] 24 5/16 [6] 23 /16 [40] [341] 92 /8 [2359] 5 3/16 [3434] 140 3/4 [355] 20 [5258] 23 5/16 [6942] 2 /16 [15] [315] Panel 49 1/2 METAL CLAD - NARROW STILE (XXX) METAL CLAD - WIDE STILE () PLAN VIEW - - - - X-X - - [14] - - - - X-X - - 8 3/16 [38] - - X-X - - - - X-X - - M [243] - - X-X - - - - X-X - - M11 www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE METAL CLAD - WIDE STILE () METAL CLAD - NARROW STILE (XXX) GLAZING STOP OPTIONS Maximum Width - ' www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE Note: Drawings shown are typical details. The preparation of the rough opening for large openings such as those required by, but Additional sizes and configurations available. not limited to, LiftSlide, Bifold and MultiSlide doors have unique requirements. Structural Screen options may be available depending on size and configuration. headers that allow for deflection no greater than 1/8 along the unsupported length once All dimensions to have +/- 1/16" (2 mm) tolerance. O = Fixed the header is fully loaded are required. Special care needs to be taken when installing any unit including transoms above such large Loewen is not responsible for site measurements or the determination of structural and architectural requirements for the installation of large opening products such as but not limited to, Liftslide, Bifold and MultiSlide doors. Site specifications are the responsibility of

LOEWEN MULTISLIDE: WIDE STILE - BI-PARTING LOEWEN MULTISLIDE: BI-PARTING - DOOR DETAIL HEAD & SILL DETAIL OPTIONAL RISERS 90 /16 [230] 129 15/16 [3301] 8 11/16 [3523] 201 15/16 [5129] 264 3/16 [6] 234 3/4 [53] [341] 89 /16 [2281] 128 15/16 [3434] 11/16 [349] 200 15/16 [54] 263 3/16 [611] 233 3/4 [593] [315] Panel 50 1/2 [1283] " - - - - X-X - - METAL CLAD - NARROW STILE (-) METAL CLAD - WIDE STILE (-) [14] - - - - X-X - - PLAN VIEW 8 3/16 [38] - - X-X - - - - X-X - - [243] - - X-X - - M12 - - X-X - - M www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE Maximum Width - ' METAL CLAD - WIDE STILE (-) METAL CLAD - NARROW STILE (-) GLAZING STOP PROFILES www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE Note: Drawings shown are typical details. The preparation of the rough opening for large openings such as those required by, but Additional sizes and configurations available. not limited to, LiftSlide, Bifold and MultiSlide doors have unique requirements. Structural Screen options may be available depending on size and configuration. headers that allow for deflection no greater than 1/8 along the unsupported length once All dimensions to have +/- 1/16" (2 mm) tolerance. O = Fixed the header is fully loaded are required. Special care needs to be taken when installing any unit including transoms above such large Loewen is not responsible for site measurements or the determination of structural and architectural requirements for the installation of large opening products such as but not limited to, Liftslide, Bifold and MultiSlide doors. Site specifications are the responsibility of

LOEWEN MULTISLIDE: NARROW STILE - BI-PARTING with POCKET LOEWEN MULTISLIDE: WIDE STILE - BI-PARTING with POCKET 3 1/4 [2623] 145 5/8 [99] 151 1/8 [3839] 21 /16 [5523] 283 3/4 [20] [341] 3/16 [629] [341] 3 1/4 [2623] 142 9/16 [99] 151 1/8 [3839] 21 [5445] 2 3/16 [041] [341] 3/16 [629] [341] 2 1/4 [259] 144 5/8 [3] 150 1/8 [38] 216 /16 [549] 282 3/4 [182] [315] 6 3/16 [6253] [315] 2 1/4 [259] 141 9/16 [3595] 150 1/8 [38] 2 [5419] 26 3/16 [015] [315] 6 3/16 [6253] [315] Framed Rough Opening 53 1/4 [52] 95 9/16 [28] 3/16 [19] 143 /16 [44] 209 3/4 [5328] 22 1/4 [52] 125 3/16 [3180] 191 3/16 [4856] Framed Rough Opening 53 1/4 [52] 91 3/4 [2330] 3/16 [19] 9 5/8 [3546] 203 1/4 [5162] 225 3/8 [525] 125 3/16 [3180] 189 /8 [48] Panel [6 29 /8 [59] 4 15/16 [121] Panel 30 3/16 [82] 48 /16 [1230] Pocket ] Pocket - X-X - X-X XX-XX XXX- - X-X - X-X - X-X XX-XX XXX- - X-X [14] - X-X - X-X XX-XX XXX- - X-X [14] - X-X - X-X XX-XX XXX- - X-X 8 3/16 [38] - X-X XX-XX - X-X XX-XX XXX- XXX- - - X-X X-X 8 3/16 [38] - X-X XX-XX XXX- - X-X - X-X XX-XX XXX- - X-X M14 [243] - X-X XX-XX XXX- - X-X [243] - X-X XX-XX XXX- - X-X M15 www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE Maximum Width - ' - X-X XX-XX XXX- - X-X Maximum Width - ' - X-X XX-XX XXX- - X-X www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE

LOEWEN MULTISLIDE: BI-PARTING with POCKET - DOOR DETAIL HEAD AND SILL DETAIL GLAZING STOP PROFILES DOUBLE NOTES TRIPLE METAL CLAD - NARROW STILE (-) METAL CLAD - WIDE STILE (X-X) PLAN VIEW M16 M1 www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE METAL CLAD - NARROW STILE (-) METAL CLAD - WIDE STILE (X-X) www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE Note: Drawings shown are typical details. Additional sizes and configurations available. Screen options may be available depending on size and configuration. All dimensions to have +/- 1/16" (2 mm) tolerance. O = Fixed The preparation of the rough opening for large openings such as those required by, but not limited to, LiftSlide, Bifold and MultiSlide doors have unique requirements. Structural headers that allow for deflection no greater than 1/8 along the unsupported length once the header is fully loaded are required. Special care needs to be taken when installing any unit including transoms above such large Loewen is not responsible for site measurements or the determination of structural and architectural requirements for the installation of large opening products such as but not limited to, Liftslide, Bifold and MultiSlide doors. Site specifications are the responsibility of

M19 TO FIND YOUR NEAREST LOEWEN DEALER GO TO WWW.LOEWEN.COM Information subject to change without notice. www.loewen.com 1.800.563.9 LOEWEN MULTISLIDE Distributed by Loewen Inc. in the USA and C.P. Loewen Enterprises Ltd. in Canada and internationally. Trade Marks owned by C.P. Loewen Enterprises Ltd. Used under license. C.P. Loewen Enterprises Ltd. All rights reserved. Recycled Paper Printed in Canada 122015