Makeblock Robot Starter Electronic Kit ID: 4050 Colors/Variants: Suggested Retail Price (USD): 69.99 Package Weight: 5-0 -20 2-50 5+ 5 20 25 30 59.49 55.99 52.49 48.99 controller is compatiable with Arduino, each Me-modules come with a Arduino library for This starter kit is design for building some basic robot application, such as IR remote control robot or line finder robot. With super easy-to-use RJ connectors and color tags, wiring is so easy even for users without any electronic knowledge. We also provide libraies and example codes for all the modules, The Me base shield can plug in a Arduino compatiable board, provides 8 RJ ports, with a TB662 motor driver IC on it, can drive 2 motors. The IR receiver is special design to guarantee the real-time response, since there is special decoder IC in the receiver. The line finder includes two sensors in one board, can be easily attached on Makeblock mechanical parts. Cables, acrylic box and battary holder included
PartstList No Spec Qty Meduino UNO 2 Me Baseshield 3 Me IR Receiver 4 IR remote controller 5 Me Line finder 6 battary holder 7 Acrylic box 8 USB cables 9 RJ cables 3
Makeblock Robot Advanced Electronic Kit ID: 4060 Colors/Variants: Suggested Retail Price (USD): 09.99 Package Weight: 5-0 -20 2-50 5+ 5 20 25 30 93.49 87.99 82.49 76.99
controller is compatiable with Arduino, each Me-modules come with a Arduino library for easy programming. This Advanced kit includes all modules in the starter kit, ie. Meduino UNO, Me base shield, Me IR receiver, IR remote controller, Me linefinder. besides, there are additional modules : one Me motor driver, one Me servo driver. With super easy-to-use RJ connectors and color tags, wiring is so easy even for users without any electronic knowledge. We also provide libraies and example codes for all the modules. The Me base shield can plug in a Arduino compatiable board, provides 8 RJ ports, with a TB662 motor driver IC on it, can drive 2 motors. The Me motor driver can drive one DC motor,with a RJ port which contains power lines and signal lines, wiring is simpified. The Me servo driver can drive two servos, with high efficiency DC-DC converter converts the input voltage into suitable voltage for servos, wchich is 6V. The IR receiver is special design to guarantee the real-time response, since there is special decoder IC in the receiver. The line finder includes two sensors in one board, can be easily attached on Makeblock mechanical parts. Cables, acrylic box and battary holder included PartstList No Spec Qty Meduino UNO 2 Me Baseshield 3 Me IR Receiver 4 IR remote controller 5 Me Line finder 6 Me Bluetooth modules 7 Me motor driver 8 Me servo driver 9 battary holder 0 Acrylic box USB cables 2 RJ cables 6
Makeblock Me base shield ID: 980503 Colors/Variants: Suggested Retail Price (USD): 9.99 Package Weight: 5-0 -20 2-50 5+ 5 20 25 30 6.99 5.99 4.99 3.99 The Me base shield can plug in a Arduino compatiable board, provides 8 RJ ports, all Me series modules can be connected to these ports. with a TB662 motor driver IC on board, it can drive 2 DC motors. Besides the 8 RJ port, there are 2.54mm pin pad on the board, all I/O pins on the bottom Arduino board are conected to these pads.
Makeblock Me Motor driver ID: 28003 Colors/Variants: Suggested Retail Price (USD):.99 Package Weight: 5-0 -20 2-50 5+ 5 20 25 30 0.9 9.59 8.99 8.39 The Me motor driver can drive one DC motor,with a RJ port which contains power lines and signal lines, wiring is simpified. The motor driver IC on the board is TB662, which is a high efficiency MOSFET driver, with low heat disipation. Over current protection included to stop the driver IC burned out. Input voltage: 4.5-3.5V Output current: 2A (6A peak)
Makeblock Me Servo driver ID: 280203 Colors/Variants: Suggested Retail Price (USD): 2.99 Package Weight: 5-0 -20 2-50 5+ 5 20 25 30.04 0.39 9.74 9.09 The Me motor driver can drive two servos, with a RJ0 port which contains power lines and signal lines, wiring is simpified. With high efficiency DC-DC converter converts the input voltage into suitable voltage for servos, wchich is 6V, no need to find special power supply for servos.
Makeblock IR Receiver ID: 300203 Colors/Variants: Suggested Retail Price (USD): 9.99 Package Weight: 5-0 -20 2-50 5+ 5 20 25 30 8.49 7.99 7.49 6.99 This IR receiver includes a special decoder IC on board, for decoding the IR signal, this extremly save the chip resources of the main control board, brings real-time response to the IR controller. In other cases, the main controller(such as an Arduino Leonardo board) is in charge of decoding the IR signal, this will cause non-response to the controller, especially there are other calculation need to be done by the chip.
Makeblock Line Finder ID: 240203 Colors/Variants: Suggested Retail Price (USD): 9.99 Package Weight: 5-0 -20 2-50 5+ 5 20 25 30 8.49 7.99 7.49 6.99 This line finder contains two sensors on board, one board is enough to build a line finder robot.
Makeblock Ultrasonic Ranger ID: 24003 Colors/Variants: Suggested Retail Price (USD): 9.99 Package Weight: 5-0 -20 2-50 5+ 5 20 25 30 6.99 5.99 4.99 3.99 This ultrosonic sensor can be used to messure distance, from 4mm to 5000mm.
Makeblock Limit Switch ID: LS23002 Colors/Variants: Suggested Retail Price (USD): 4.99 Package Weight: 5-0 -20 2-50 5+ 5 20 25 30 4.24 3.99 3.74 3.49 The limit switch on this board is high quility switch from Omron
Makeblock Bluetooth module ID: 30003 Colors/Variants: Suggested Retail Price (USD): 9.99 Package Weight: 5-0 -20 2-50 5+ 5 20 25 30 6.99 5.99 4.99 3.99 This is bluetooth 2.0 modules, can be slave and master mode.