Cytron 3A Motor Driver Shield SHIELD-3AMOTOR. User s Manual Rev 1.0 April 2017
|
|
- Adam Wade
- 5 years ago
- Views:
Transcription
1 Cytron 3A Motor Driver Shield SHIELD-3AMOTOR User s Manual Rev 1.0 April 2017 Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. No representation or warranty is given and no liability is assumed by Cytron Technologies Incorporated with respect to the accuracy or use of such information or infringement of patents or other intellectual property rights arising from such use or otherwise. Use of Cytron Technologies s products as critical components in life support system is not authorized except with express written approval by Cytron Technologies. No licenses are conveyed, implicitly or otherwise, under any intellectual property rights.
2 Back to INDEX 1
3 INDEX ROBOT.HEAD to TOE PAGES 1. INTRODUCTION 2. PACKING LIST 3. PRODUCT SPECIFICATIONS 4. BOARD LAYOUT 5. POWER SUPPLY 6. HARDWARE CONNECTION 6.1. Motor Controlled IO Pins 6.2. Auto_Calibrating Line Sensor IO Pins 7. WARRANTY Back to INDEX 2
4 1. INTRODUCTION Cytron 3A Motor Driver Shield ( Code: SHIELD-3AMOTOR ) is an Arduino shield for controlling dual DC motor up to 3A for each channel. This product is improvement from our previous Cytron 2A Motor Driver Shield. It is compatible with most of Arduino boards like Uno, Leonardo, Mega, Due, Zero, 101 and possibly other pin compatible main boards like CIKU, CT UNO and CT ARM. SHIELD-3AMOTOR uses DRV8871 SMD IC and support for both signed magnitude and locked anti-phase. Compare to previous shield, SHIELD-3AMOTOR can handle higher current up to 3A together with limit current protection. Some of the features for SHIELD-3AMOTOR are summarized as below: Bi-directional control for dual brushed DC motor. Support motor voltage from 7V to 30V*. Maximum current up to 3A peak and 1.2A continuously, each channel. Current limit protection. Support 3.3V and 5V logic level input. Stackable I/O header pin. Selectable DIP switch mode for Signed Magnitude and Locked Anti-Phase. Quick test switch for both channel. NO POLARITY PROTECTION FOR V MOTOR. *For voltage more than 12V, please refer to section 5. Power Supply. Back to INDEX 3
5 2. PACKING LIST Please check the parts and components according to the packing list. If there are any parts missing, please contact us at immediately. No ITEMS QUANTITY 1 Cytron 3A Motor Driver (Code: SHIELD-3AMOTOR ) 1 Back to INDEX 4
6 3. PRODUCT SPECIFICATIONS Dimension (unit in mm): Absolute Maximum Rating of SHIELD-3AMOTOR: No PARAMETERS Min Typ Max Unit 1 Input Voltage (Motor Supply Voltage) 7 30 V 2 I MAX (Max Continuous Motor Current) * 1.2 A 3 I PEAK (Peak Motor Current) ** 3 A 4 V IOH (Logic Input HIGH Level) V 5 V IOL (Logic Input LOW Level) V * Depends on the room temperature. **Must not exceed 1 second. NOTE For Input Voltage more than 12V, please refer to section 5. Power Supply. Back to INDEX 5
7 4. BOARD LAYOUT Top view Bottom view Back to INDEX 6
8 LABEL A B C D E F G H I J K L M N O P FUNCTION LSS05 CONNECTOR Connector for Auto-Calibrating Line Sensor (Code: LSS05 ). User can connect LSS05 directly to this shield and can be interfaced with Arduino. MOTOR 2 TERMINAL BLOCK Connect to DC motor. User can screw to lock the wire to the terminal block. MOTOR 1 TERMINAL BLOCK Connect to DC motor. User can screw to lock the wire to the terminal block. POWER SUPPLY TERMINAL BLOCK Connect to battery power source. User can screw to lock the wire to the terminal block. NO POLARITY PROTECTION, please double check the connection before power up. MOTOR 2 LED INDICATOR Indication for current flow and direction for motor LEFT. If LED M2A turns on, means current flows from output M2A to M2B. Vice versa. MOTOR 1 LED INDICATOR Indication for current flow and direction for motor LEFT. If LED M1A turns on, means current flows from output M1A to M1B. Vice versa. POWER LED INDICATOR Indication for board s power. RESET BUTTON Press this button will restart the system. ARDUINO STACKABLE HEADER PIN Other Arduino shield can be stacked on top of this shield. MODE SELECTION DIP SWITCH User can select either sign magnitude or locked anti-phasemode by setting the DIP switch. MOTOR 2 TEST BUTTON Fast test to check driver functionality for motor 2. If A is pressed, current flows from output M2A to M2B. Vice Versa. MOTOR 1 TEST BUTTON Fast test to check driver functionality for motor 1. If A is pressed, current flows from output M1A to M1B. Vice Versa. MOTOR CONNECTION PADS For ADVANCED user who want to change the motor control pins connection. DIP SWITCH SETTING EXAMPLE Example DIP switch setting for Sign Magnitude and Locked Anti-Phase. LSS05 CONNECTION PADS For ADVANCED user who want to change LSS05 connection. PWRIN VIN CONNECTION PAD In case want to supply more than 12V, please disconnect this pad. For more detail, please refer to section 5. Power Supply. Back to INDEX 7
9 5. POWER SUPPLY SHIELD-3AMOTOR supports battery with input voltage ranges from 7V to 30V. For voltage more than 12V, Vin and PWRIN must be supply with different source and this connection (please refer to the pictures below) must be cut. NOTE Left and right photos shows the PWRIN Vin connection before and after cut. PWRIN comes from SHIELD-3AMOTOR power connector, while Vin is from Arduino adapter. Arduino Uno recommendation input voltage is 12V (max) and this is the reason why PWRIN Vin must be disconnected (if user would like to supply more than 12V to SHIELD-3AMOTOR). WARNING THERE IS NO POLARITY PROTECTION ON SHIELD-3AMOTOR, PLEASE DOUBLE CHECK THE CONNECTION BEFORE CONNECTING TO POWER SOURCE. ONCE THE TRACE IS BEING CUT, WARRANTY IS VOID. Back to INDEX 8
10 6. HARDWARE CONNECTION This section shows the example of using SHIELD-3AMOTOR with Arduino Uno as the main controller to control dual brush DC motor. However, other Arduino main board controller can be used (Leonardo, Mega, Due). Arduino Uno with SHIELD-3AMOTOR Arduino Mega with SHIELD-3AMOTOR Back to INDEX 9
11 CIKU with SHIELD-3AMOTOR CT UNO with SHIELD-3AMOTOR Back to INDEX 10
12 Example of line following robot with SHIELD-3AMOTOR Back to INDEX 11
13 6.1 Motor Controlled IO Pins User can set mode on SHIELD-3AMOTOR to Signed Magnitude or Locked Anti-Phase mode by moving the 4 mini switches on DIP switch mode. By default, connection between SHIELD-3AMOTOR control pins and Arduino pins is shown as table below. SHIELD-3AMOTOR Control Pin Name Sign Magnitude Arduino Pins Locked Anti-Phase DIR1 4 5 EN1 5 4 EN2 6 7 DIR2 7 6 To set SHIELD-3AMOTOR to Sign Magnitude mode, move mini switch labeled 5, 6, 7, 8 to ON. While, for Locked Anti-Phase mode, set mini switch 1, 2, 3, 4 to ON. DIP Switch for Sign Magnitude DIP Switch for Locked Anti-Phase NOTE Please set either Sign Magnitude or Locked Anti-Phase at a time. Mix up the setting will cause to unexpected result. Back to INDEX 12
14 For ADVANCED user, If you would like to change the default connection for motor control pins, you can cut the connection (please refer the photo below) at the back of the board, solder a jumper and connect to any IO. WARNING ONCE THE TRACE IS BEING CUT, WARRANTY IS VOID. Back to INDEX 13
15 6.2 Auto-Calibrating Line Sensor IO Pins Auto-Calibrating Line Sensor (LSS05) can be connected directly to SHIELD-3AMOTOR and can be interfaced with Arduino. Below is a table showing the default connection between LSS05 and SHIELD-3AMOTOR Arduino pins. Auto-Calibrating Line Sensor Pins Arduino Pins O1 13 O2 12 O3 11 O4 10 O5 9 Calibrate 8 Back to INDEX 14
16 For ADVANCED user, If you would like to change the default connection for LSS05 pins, you can cut the connection (please refer the photo below) at the back of the board, solder a jumper and connect to any IO. WARNING ONCE THE TRACE IS CUT, WARRANTY IS VOID. Back to INDEX 15
17 7. WARRANTY Product warranty is valid for 12 months. Warranty only applies to manufacturing defect. Any damage caused by misuse is not covered under warranty. Warranty does not cover freight cost for both ways. Prepared by: Cytron Technologies Sdn Bhd No. 1, Lorong Industri Impian 1, Taman Industri Impian, Bukit Mertajam, Penang, Malaysia. Tel: Fax: Back to INDEX 16
SHIELD-MD10 Cytron 10A Motor Driver Shield
SHIELD-MD10 Cytron 10A Motor Driver Shield User's Manual V1.0 October 2012 Created by Cytron Technologies Sdn. Bhd. All Right Reserved 1 Index 1. Introduction 3 2. Packing List 4 3. Product Specification
More informationIFC-EB02 Interface Free Controller Extension Board
IFC-EB02 Interface Free Controller Extension Board User s Manual V1.1 Apr 2008 Information contained in this publication regarding device applications and the like is intended through suggestion only and
More informationShield - GPS53. User's Manual. Dec 2014 V1.0. ROBOT. HEAD to TOE Product User s Manual Shield-GPS53
Shield - GPS53 User's Manual V1.0 Dec 2014 Created by Cytron Technologies Sdn. Bhd. All Rights Reserved 1 Index 1. Introduction and Overview 3 2. Packing List 4 3. Dimension 5 4. Product Layout 6 5. Product
More informationRE08A Rotary Encoder Kit
RE08A Rotary Encoder Kit User s Manual V1.5 November 2011 Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded
More informationSK18A. 18 Pins PIC START-UP KIT. User s Manual V1.1. Dec 2007
SK18A 18 Pins PIC START-UP KIT User s Manual V1.1 Dec 2007 Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded
More informationCytron USB to UART Converter UC00A
Cytron USB to UART Converter UC00A User s Manual V1.1 August 2009 Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded
More informationCytron RFM LoRa Shield SHIELD-LORA-RFM
Cytron RFM LoRa Shield SHIELD-LORA-RFM User's Manual V1.0 March 2017 Created by Cytron Technologies Sdn. Bhd. All Right Reserved 1 Index 1. Introduction 3 2. Packing List 4 3. Board or Product Layout 5
More informationIFC-MD15A Interface Free Controller Brush Motor Card
IFC-MD15A Interface Free Controller Brush Motor Card User s Manual V1.0 Oct 2008 Information contained in this publication regarding device applications and the like is intended through suggestion only
More informationIFC-OC04 Interface Free Controller Output Card
IFC-OC04 Interface Free Controller Output Card User s Manual V1.1 Apr 2008 Information contained in this publication regarding device applications and the like is intended through suggestion only and may
More informationMaker Uno MAKER-UNO. User s Manual. Rev 1.0 Dec 2017
Maker Uno MAKER-UNO User s Manual Rev 1.0 Dec 2017 Informa on contained in this publica on regarding device applica ons and the like is intended through sugges on only and may be superseded by updates.
More informationEasyMP3 Shield SHIELD-EZMP3
EasyMP3 Shield SHIELD-EZMP3 User's Manual V1.0 Apr 2016 Created by Cytron Technologies Sdn. Bhd. All Right Reserved 1 Index 1. Introduction 3 2. Packing List 4 3. Board or Product Layout 5 4. Dimension
More informationESPWiFi Shield SHIELD ESP WIFI Rev2.0
ESPWiFi Shield SHIELD ESP WIFI Rev2.0 User's Manual V2.0 April 2016 Created by Cytron Technologies Sdn. Bhd. All Right Reserved 1 Index 1. Introduction 3 2. Packing List 4 3. Board or Product Layout 5
More informationBLD04A Brushless DC Motor Driver
BLD04A Brushless DC Motor Driver User s Manual V1.1 MAY 2011 Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded
More informationPS2 Controller Starter Kit SKPS
PS2 Controller Starter Kit SKPS User s Manual V1.0 Oct 2008 Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded
More information915MHz 8-channel LoRa Gateway Hat for Raspberry Pi HAT-LRGW-915
ROBOT. HEAD to TOE 915MHz 8-channel LoRa Gateway Hat for Raspberry Pi HAT-LRGW-915 User's Manual V1.0 Aug 2017 Created by Cytron Technologies Sdn. Bhd. All Right Reserved 1 Index 1. Introduction 3 2. Packing
More informationCYTRON USB PIC Programmer v2009 UP00B
CYTRON USB PIC Programmer v2009 UP00B User s Manual V1.0 Nov 2008 Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded
More informationRFID: Read and Display V2010. Version 1.1. Sept Cytron Technologies Sdn. Bhd.
PR8-B RFID: Read and Display V2010 Version 1.1 Sept 2010 Cytron Technologies Sdn. Bhd. Information contained in this publication regarding device applications and the like is intended through suggestion
More informationSD02C 2A Stepper Motor Driver. User s Manual V1.0
SD02C 2A Stepper Motor Driver User s Manual V1.0 APRIL 2016 Index ROBOT. HEAD to TOE 1. Introduction and Overview 3 1.0 Introduction of SD02C 3 1.1 System Overview 4 1.2 General Description 5 2. Packing
More informationIFC-MB00 Interface Free Controller Main Board
IFC-MB00 Interface Free Controller Main Board User s Manual V1.1 Apr 2008 Information contained in this publication regarding device applications and the like is intended through suggestion only and may
More informationGUIDE TO SP STARTER SHIELD (V3.0)
OVERVIEW: The SP Starter shield provides a complete learning platform for beginners and newbies. The board is equipped with loads of sensors and components like relays, user button, LED, IR Remote and
More informationDisplay Real Time Clock (RTC) On LCD. Version 1.2. Aug Cytron Technologies Sdn. Bhd.
Display Real Time Clock (RTC) On LCD PR12 Version 1.2 Aug 2008 Cytron Technologies Sdn. Bhd. Information contained in this publication regarding device applications and the like is intended through suggestion
More informationHUB-ee BMD-S Arduino Proto Shield V1.0
HUB-ee BMD-S Arduino Proto Shield V1.0 User guide and assembly instructions Document Version 1.0 Introduction 2 Schematic 3 Quick user guide 4 Assembly 5 1) DIP Switches 5 2) Micro-MaTch Connector Headers
More informationSK40C ENHANCED 40 PINS PIC START-UP KIT. User s Manual V1.3. March 2012
SK40C ENHANCED 40 PINS PIC START-UP KIT User s Manual V1.3 March 2012 Information contained in this publication regarding device applications and the like is intended through suggestion only and may be
More informationDual H-Bridge shield. Dual H-Bridge shield - board user manual. Shield for DC motor control with IFX9202. About this document.
- board user manual Dual H-Bridge shield About this document Scope and purpose This document details the functionality and the required steps for running the Dual H-Bridge shield. Included are instructions
More informationDK-PGM-01. User's Guide. IQRF Universal Development kit MICRORISC s.r.o. MNDKPGM01_ Page 1
IQRF Universal Development kit User's Guide 2010 MICRORISC s.r.o. www.iqrf.org MNDKPGM01_100114 Page 1 Description DK-PGM-01 is an IQRF universal development and debugging kit. It is primarily intended
More informationTC35 GSM Development Board
TC35 GSM Development Board User s Manual V1.1 Mar 2014 Created by Cytron Technologies Sdn. Bhd. All Rights Reserved 1 Created by Cytron Technologies Sdn. Bhd. All Rights Reserved 2 Index 1. Introduction
More informationUSB Stamp Adapter Board
User Manual Engineering» Design» Product Blue Wolf, Inc. 9179 W. State Street Garden City, ID 83714 Revision History Version # Release Date Revision/Release Comments 1.0 3/7/2011 Initial draft for release.
More informationTic-Tac-Toe with mtouch. Version 1.0. June Cytron Technologies Sdn. Bhd.
Tic-Tac-Toe with mtouch PR28 Version 1.0 June 2010 Cytron Technologies Sdn. Bhd. Information contained in this publication regarding device applications and the like is intended through suggestion only
More informationMEGATRONICS V3.0 QUICK START GUIDE
MEGATRONICS V3.0 QUICK START GUIDE Thank you for purchasing the Megatronics v3.0! This small guide will answer the basic questions on how to connect the board to your 3D printer. For more information visit
More informationUser s Manual. Rev. 1.0 MCI-MA StampDuino. StampDuino User s Manual Page 1 of 7
StampDuino User s Manual Page 1 of 7 User s Manual StampDuino Rev. 1.0 MCI-MA-0142 MCI Electronics. Luis Thayer Ojeda 0115. Oficina 402 Santiago, Chile Tel: +56 2 3339579 Fax: +56 2 3350589 MCI Electronics.
More informationHow-To #7: Assemble an H-bridge Circuit Board
How-To #7: Assemble an H-bridge Circuit Board Making a DC motor turn is relatively easy: simply connect the motor's terminals to a power supply. But what if the motor is to be controlled by an Arduino,
More informationPreliminary TK23H256 High Temperature ROM
Preliminary TK23H256 High Temperature ROM June 06, 2018 Product Proposal Features o 262,144 bit ROM o Up to 300 o C Operation o -100 ns Access Time (5V) o Fully Non-Volatile o 2.7V to 5.5V operation o
More informationDATASHEET 4D SYSTEMS. 4D Arduino Adaptor Shield TURNING TECHNOLOGY INTO ART. 4Display-Adaptor-Shield
TURNING TECHNOLOGY INTO ART DATASHEET 4Display-Adaptor-Shield Document Date: 20 th November 2012 Document Revision: 1.0 Uncontrolled Copy when printed or downloaded. Please refer to the 4D Systems website
More informationEPT-200TMP-TS-U2 TMP102 Temperature Sensor Docking Board Data Sheet
EPT-2TMP-TS-U2 TMP12 Temperature Sensor Docking Board Data Sheet This docking board is based on the TMP12 Temperature Sensor chip from Texas Instruments. It can measure the ambient temperature between
More informationHUB-ee BMD-S Arduino Proto Shield V1.1
HUB-ee BMD-S Arduino Proto Shield V1.1 User guide and assembly instructions Document Version 0.5 Introduction & Board Guide 2 Schematic 3 Quick User Guide 4 Assembly Guide 6 Kit Contents 7 1) Diodes and
More informationARDUINO MEGA 2560 REV3 Code: A000067
ARDUINO MEGA 2560 REV3 Code: A000067 The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D
More informationkeyestudio Keyestudio MEGA 2560 R3 Board
Keyestudio MEGA 2560 R3 Board Introduction: Keyestudio Mega 2560 R3 is a microcontroller board based on the ATMEGA2560-16AU, fully compatible with ARDUINO MEGA 2560 REV3. It has 54 digital input/output
More informationRS422/RS485 Shield. Application Note: Multiple RS485 busses. 1 Introduction
1 Introduction This application note will show you how to connect up to 3 independent RS485 busses to one Arduino. This can be useful if you want to create a gateway between these busses or if you want
More informationWeb Site: Forums: forums.parallax.com Sales: Technical:
Web Site: www.parallax.com Forums: forums.parallax.com Sales: sales@parallax.com Technical: support@parallax.com Office: (916) 624-8333 Fax: (916) 624-8003 Sales: (888) 512-1024 Tech Support: (888) 997-8267
More informationLight & Sound Control Module
Light & Sound Control Module Operation and Installation Manual G-Scale Graphics 5860 Crooked Stick Dr. Windsor, CO 80550 970-581-3567 GScaleGraphics@comcast.net www.gscalegraphics.net Revision 55: C: Updated
More informationHow-To #3: Make and Use a Motor Controller Shield
How-To #3: Make and Use a Motor Controller Shield The Arduino single-board computer can be used to control servos and motors. But sometimes more current is required than the Arduino can provide, either
More informationSD02B 2A Stepper Motor Driver
SD02B 2A Stepper Motor Driver User s Manual V1.2 July 2013 Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded
More informationGetting started with X-NUCLEO-IHM06A1 low voltage stepper motor driver expansion board based on STSPIN220 for STM32 Nucleo
User manual Getting started with X-NUCLEO-IHM06A1 low voltage stepper motor driver expansion board based on STSPIN220 for STM32 Nucleo Introduction The X-NUCLEO-IHM06A1 is a low voltage stepper motor driver
More informationLC1628-L High-Speed USB Flash Disk Controller Preliminary Data Sheet
LC1628-L High-Speed USB Flash Disk Controller Preliminary Data Sheet Rev. 1.1 Jan. 18, 2007 頁 1 / 12 Revision History Date Rev Owner Description Jan 09, 2007 1.0 Iris Chang Jan 18, 2007 1.1 Iris Chang
More informationBrewTroller Phoenix. Owners Manual. Updated - March 14, 2016 BREWTROLLER PHOENIX 1
BrewTroller Phoenix Owners Manual Updated - March 14, 2016 BREWTROLLER PHOENIX 1 2016 BrewTroller All Rights Reserved. Product warranty or service will not be extended if: (1) the product is repaired,
More informationUser Manual. UIM240XX Series Parallel Signal Control Miniature Integrated Stepper Motor Driver V1.2
User Manual UIM240XX Series Parallel Signal Control Miniature Integrated Stepper Motor Driver V1.2 UIM24002/04/08 Please pay attention to the following before using the UIROBOT products: UIROBOT products
More informationArduino Uno. Arduino Uno R3 Front. Arduino Uno R2 Front
Arduino Uno Arduino Uno R3 Front Arduino Uno R2 Front Arduino Uno SMD Arduino Uno R3 Back Arduino Uno Front Arduino Uno Back Overview The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet).
More informationUser Manual. UIM240XX Series Parallel Signal Control Miniature Integrated Stepper Motor Driver
User Manual UIM240XX Series Parallel Signal Control Miniature Integrated Stepper Motor Driver UIM24002/04/08 Please pay attention to the following before using the UIROBOT products: UIROBOT products meet
More informationBusBoard-2 - Zig-Zag Prototype Board, Size 2
BusBoard-2 - Zig-Zag Prototype Board, Size 2 Prototype circuit board for high connectivity IC and connector applications. Features The BusBoard-2 prototyping circuit board has the BusBoard zig-zag circuit
More informationxpico 110 Wired Device Server Module Evaluation Kit User Guide
xpico 110 Wired Device Server Module Evaluation Kit User Guide Part Number 900-788-R Revision A April 2017 Intellectual Property 2017 Lantronix, Inc. All rights reserved. No part of the contents of this
More informationP-NUCLEO-USB001. STM32 Nucleo pack for USB Type-C and Power Delivery. Features. Description
STM32 Nucleo pack for USB Type-C and Power Delivery Data brief Features Two DRP USB Type-C receptacles USB 2.0 full-speed data communication interface as peripheral V BUS load and discharge switches V
More informationSilvertel. Ag Features. 2. Description. Compliant with PoH and IEEE802.3at Type 1(af) & Type 2. Small SIL package size 50.
Silvertel V1.0 Aug 2012 Datasheet Pb 1. Features Compliant with PoH and IEEE802.3at Type 1(af) & Type 2 Small SIL package size 50.8mm (L) x 35mm (H) Low cost Output power up to 95W Minimal (low cost) external
More informationDual Serial Shield User Manual
Dual Serial Shield User Manual PN: 2050 Berkshire Products, Inc. Phone: 770-271-0088 http://www.bkp-store.com/ Rev: 1.00 Copyright 2013 Table of Contents 1 Introduction... 2 1.1 XB compatibility... 2 2
More informationUser Manual. UIM240XX Series Parallel Signal Control Miniature Integrated Stepper Motor Driver
User Manual UIM240XX Series Parallel Signal Control Miniature Integrated Stepper Motor Driver UIM24002/04/08 Please pay attention to the following before using the Mach Motion products: - Mach Motion products
More informationARDUINO MEGA ADK REV3 Code: A000069
ARDUINO MEGA ADK REV3 Code: A000069 OVERVIEW The Arduino MEGA ADK is a microcontroller board based on the ATmega2560. It has a USB host interface to connect with Android based phones, based on the MAX3421e
More informationRS-232 Adapter Board
User Manual Blue Wolf, Inc. 9179 W. State Street Garden City, ID 83714 Revision History Version # Release Date Revision/Release Comments 1.0 3/14/2011 Initial draft for release. The information contained
More informationRoboClaw 120A/160A/200A Dual Channel Motor Controller
RoboClaw 2x160A, 34VDC Dual Channel RoboClaw 2x120AHV, 60VDC Dual Channel RoboClaw 2x160AHV, 60VDC Dual Channel RoboClaw 2x200AHV, 60VDC Dual Channel Brushed DC Motor Controllers Version 2.1 (c) 2016 Ion
More informationIntroduction. This unit has a wide input range (6-34V) and it can provide a tightly regulated output ranging from 6 to 24V (default set to 12V).
Introduction The DCDC-USB is a small yet powerful DC-DC power supply designed to power a wide variety of devices. This DC-DC has a range of intelligent functions not found in any tradition USB converters.
More informationADVANCED MICRO SYSTEMS
Overview... 3 Included in the Box:... 3 Pinout... 4 Installation... 5 Power Supply... 6 Stepping Motors... 7 DIP Switch (JP1) Location... 8 Setting the Output Current (JP1)... 8 Microstep Resolution (JP1)...
More informationABB Drives. User s Manual. Digital I/O Extension Module RDIO-01
ABB Drives User s Manual Digital I/O Extension Module RDIO-01 Digital I/O Extension Module RDIO-01 User s Manual 3AFE 64485733 REV B EN EFFECTIVE: 10.2.2003 2003 ABB Oy. All Rights Reserved. Safety Instructions
More informationUSB-to-I2C Basic. Hardware User s Manual.
USB-to-I2C Basic Hardware User s Manual http://www.i2ctools.com/ Information provided in this document is solely for use with the USB-to-I2C product from SB Solutions, Inc. SB Solutions, Inc. reserves
More informationR325P Single Axis Driver
R325P Single Axis Driver User Manual And Commands Guide Version 1.3 Thank you for purchasing the R325P Single-Axis Step & Direction Driver. This product is warranted to be free of manufacturing defects
More informationCategories. Archive. Meta. POSTS NEWS HARDWARE APPLICATIONS DOWNLOADS FORUM LINKS ABOUT
Page 1 of 10 POSTS NEWS HARDWARE APPLICATIONS DOWNLOADS FORUM LINKS ABOUT Categories Posts (2) Archive July 2013 About the TOS-100 The TOS-100 is an Arduino compatible Shield capable of driving one stepper
More informationSendyne SFP102MOD Precision Current Measurement Module
Sendyne Sensing Products Family Sendyne SFP102MOD Precision Current Measurement Module Description The Sendyne SFP102MOD is a shunt-based precision current measurement module. The 100-μΩ shunt with molded
More informationModtronix Engineering Modular Electronic Solutions SBC28DC. Single board computer for 28 pin DIP PICs
Modtronix Engineering Modular Electronic Solutions Single board computer for 28 pin DIP PICs Table of Contents 1 Introduction...2 2 Features...4 3 Expansion Connectors...5 3.1 Daughter Board Connectors...5
More informationARDUINO GSM SHIELD 2 (ANTENNA CONNECTOR) Code: A000106
ARDUINO GSM SHIELD 2 (ANTENNA CONNECTOR) Code: A000106 The Arduino GSM Shield 2 allows your Arduino board to make phone calls, send SMS and connect to the Internet. The Arduino GSM Shield 2 allows an Arduino
More informationARDUINO UNO REV3 SMD Code: A The board everybody gets started with, based on the ATmega328 (SMD).
ARDUINO UNO REV3 SMD Code: A000073 The board everybody gets started with, based on the ATmega328 (SMD). The Arduino Uno SMD R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output
More informationL298N Dual H-Bridge Motor Driver
Handson Technology User Guide L298N Dual H-Bridge Motor Driver This dua l bidirectional motor driver, is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow
More informationPMEG2010EH; PMEG2010EJ; PMEG2010ET
PMEG200EH; PMEG200EJ; PMEG200ET Rev. 04 20 March 2007 Product data sheet. Product profile. General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifiers with an integrated
More informationGrove - Mini I2C Motor Driver v1.0
Grove - Mini I2C Motor Driver v1.0 Introduction 3.3V 5.0V I2C This Grove - MIni I2C motor driver includes two DRV8830. The DRV8830 provides an integrated motor driver solution for battery-powered toys,
More informationRoboClaw 2x30A Dual Channel Motor Controller
RoboClaw 2x30A, 34VDC Dual Channel Brushed DC Motor Controller Version 2.2 (c) 2016 Ion Motion Control. All Rights Reserved. Feature Overview: 60 Amps Peak Per Channel Channel Bridging Supported Dual Quadrature
More informationClockaudio ARM-C Control Box Instructions
Clockaudio ARM-C Control Box Instructions www.clockaudio.com email: info@clockaudio.co.uk Clockaudio Ltd 22 Arnside Road Waterlooville Hampshire PO7 7UP England 1 Product Guarantee Thank you for purchasing
More informationTB6600 Stepper Motor Driver
TB6600 Stepper Motor Driver V1.0 07 2018 Open Source Mechatronics LTD 2018 Safety Statement The author of this document is not liable or responsible for any accidents, injuries, equipment damage, property
More informationUser Manual. for the. KT-PCIe-DVI KT-PCIe-DVI
KTD-00766-A Public User Manual Date: 2009-03-19 Page 1 of 11 User Manual for the 820957 KT-PCIe--HDMI 820959 KT-PCIe- Designed primarily for KT690 and KT780 motherboards 820957 KT-PCIe--HDMI 820959 KT-PCIe-
More informationIntegrated Stepper Drive & Motor
SMD23 Integrated Stepper Drive & Motor Manual #: 940-0S050 User Manual AMCI Motion Control Products Important User Information The products and application data described in this manual are useful in a
More informationM4-ATX-HV 6-34V Intelligent ATX Power Supply
M4-ATX-HV 6-34V Intelligent ATX Power Supply Installation Guide Version 1.0e P/N M4-ATX-HV-01 Before you start Please take a moment and read this manual before you install the M4-ATX-HV in your vehicle.
More informationP-NUCLEO-USB001. STM32 Nucleo pack for USB Type-C and Power Delivery Data brief. Features. Description
STM32 Nucleo pack for USB Type-C and Power Delivery Data brief Features Two DRP USB Type-C receptacles USB 2.0 FS data communication interface as peripheral V BUS load and discharge switches V CONN switches
More informationMIC1832. General Description. Features. Applications. Typical Application
3.3V Voltage Supervisor with Manual Reset, Watchdog Timer and Dual Reset Outputs General Description The is a low-current microprocessor supervisor for monitoring 3.3V and 3V systems. The device features
More informationGeneral Description. Figure 1. FIPSD2M Driver Board
FARES Industrial Products Bipolar Stepper Driver General Description Driving stepper motor is common necessity in most robotic projects. A stepper motor is a brushless, synchronous electric motor that
More information5B Series 16 Channel Backplane 5B01 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
5B Series 16 Channel Backplane 5B01 FEATURES Mix and Match 5B Series I/O Module Capability Factory Mutual (FM) Approved Approved for Use in Class I, Division2, Groups A, B, C, and D Locations. CE Certified:
More informationEVAL6235PD. L6235 three-phase brushless DC motor driver demonstration board. Features. Description
L6235 three-phase brushless DC motor driver demonstration board Features Operating supply voltage from 8 V to 52 V 5.6 A output peak current (2.8 A RMS ) Operating frequency up to 100 khz Non-dissipative
More informationPMEG3015EH; PMEG3015EJ
Rev. 03 13 January 2010 Product data sheet 1. Product profile 1.1 General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifiers with an integrated guard ring for
More informationBIPOLAR ANALOG INTEGRATED CIRCUIT
DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT µ PC16 2.5 V HIGH PRECISION REFEREE VOLTAGE CIRCUIT DESCRIPTION The µ PC16 are high accuracy and low drift voltage references of 2.5 V output voltage. This
More informationXNUCLEO-F030R8, Improved STM32 NUCLEO Board
XNUCLEO-F030R8, Improved STM32 NUCLEO Board STM32 Development Board, Supports Arduino, Compatible with NUCLEO-F030R8 XNUCLEO-F030R8 Features Compatible with NUCLEO-F030R8, onboard Cortex-M0 microcontroller
More informationArduino ADK Rev.3 Board A000069
Arduino ADK Rev.3 Board A000069 Overview The Arduino ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, based on the MAX3421e
More informationI2CMux Grove Board 0057-GRV4I2CMux-DSBT/ SF
Features and Benefits: The is an easy to use 4 Channel I2C Multiplexer. The I2C Mux Breakout Board is a quad bidirectional translating switch controlled via the I2C bus. The SCL/SDA controlling fans out
More informationSierra Dual 24 Volt Brushless DC Motor Controller Product Specification. Assembly 025F0348
Sierra Dual 24 Volt Brushless DC Motor Controller Product Specification Assembly Revision History ECN # Date Rev Description By EC77363 03/15/17 A Initial Release K. Jones EC81620 11/15/17 B Added Agency
More informationIn data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
More informationIDUINO for maker s life. User Manual. For IDUINO Mega2560 Board(ST1026)
User Manual For IDUINO Mega2560 Board(ST1026) 1.Overview 1.1 what is Arduino? Arduino is an open-source prototyping platform based on easy-to-use hardware and software. Arduino boards are able to read
More informationDual back-to-back Zener diode
Rev. 01 28 January 2008 Product data sheet 1. Product profile 1.1 General description in a SOD323 (SC-76) very small Surface-Mounted Device (SMD) plastic package. 1.2 Features Non-repetitive peak reverse
More informationABB Drives. User s Manual. Analogue I/O Extension Module RAIO-01
ABB Drives User s Manual Analogue I/O Extension Module RAIO-01 Analogue I/O Extension Module RAIO-01 User s Manual 3AFE 64484567 REV A EN EFFECTIVE: 1.2.2002 2002 ABB Oy. All Rights Reserved. Safety
More informationThis shield connects to Arduino with long-wire headers, which keeps the pin layout intact and allows another shield to be stacked on top.
Description SLD-000012 SIM900 GPRS/GSM shield for Arduino With the help of this shield and an SIM card, your Arduino could join your local mobile service provider s cell phone network. This shield allows
More informationPMEG1030EH; PMEG1030EJ
Rev. 04 15 January 2010 Product data sheet 1. Product profile 1.1 General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifiers with an integrated guard ring for
More informationRN-174. WiFly GSX Super Module. Features. Description. Applications. rn-174-ds v1.1 4/20/2011
www.rovingnetworks.com rn-174-ds v1.1 4/20/2011 WiFly GSX Super Module Features Development board containing the RN-171 module, status LEDs, power regulator Supports chip antenna (-C), PCB Trace antenna
More informationInstallation Manual. Flow Max 110
Installation Manual Flow Max 110 OPERATION Turn on Console by depressing ON. NOTE: This Console is equipped with a Power Down feature. The Power Down feature turns OFF the Console if no flow is sensed
More informationUser's Guide for the BAM Shield with DICE boards. User Manual. BAM-Shield with DICE-Boards. Author: Konrad Meyer. Page 1 / 13
User's Guide for the BAM Shield with DICE boards User Manual BAM-Shield with DICE-Boards Version:.en Author: Konrad Meyer Date: Page / 3 Index Important notes...3. Warning notices...3.2 General precautions...4.3
More informationMINITRONICS v1.0 DATASHEET
MINITRONICS v. DATASHEET Author Bart Meijer Date 2th of April 23 Document version. ReprapWorld.com PRODUCT OVERVIEW Minitronics is the latest development of ReprapWorld.com. It's designed to be an easy
More informationABB Drives. User s Manual. Modbus Adapter Module RMBA-01
ABB Drives User s Manual Modbus Adapter Module RMBA-01 Modbus Adapter Module RMBA-01 User s Manual 3AFE 64498851 REV A EN EFFECTIVE: 1.3.2002 2002 ABB Oy. All Rights Reserved. Safety instructions Overview
More informationMODEL USB-DA12-8E Eight Channel Digital to Analog Converter USER MANUAL
10623 Roselle Street, San Diego, CA 92121 (858) 550-9559 FAX (858) 550-7322 contactus@accesio.com www.accesio.com MODEL USB-DA12-8E Eight Channel Digital to Analog Converter USER MANUAL FILE: MUSB-DA12-8E.B1h
More informationDIY Line Tracking Smart Car with AT89C2051
DIY Line Tracking Smart Car with AT89C2051 1. Introduction: A DIY Smart Car design involves mechanical structure, electronic based sensor principle, automatic control, and even knowledge of microcontroller
More information