10GbE Converged Network Adapter NDIS Miniport Driver for Windows QLogic Corporation. All rights reserved. Table of Contents 1. Package Contents 2. OS Support 3. Supported Features 4. Using the Driver 4.1 Creating the Driver Disk 4.2 Installing the Driver 4.3 Removing the Driver 5. Limitations 6. Additional Notes 7. Contacting Support 1. Package Contents The QLogic 10GbE Converged Network Adapter NDIS Miniport Driver package contains the files listed in the following table. File Name Description qlge.inf qlge.sys qlge.cat Release.txt Readme.txt Driver installation file QLogic 10GbE Converged Network Adapter NDIS Miniport Driver Catalog file Release notes Installation instructions and other useful information (this file)
2. OS Support This release of the FCoE Adapter 10GbE NDIS Miniport driver works with Windows Server 2003 and Windows Server 2008 as shown in the following table. Miniport Driver Version Works With 32-bit NDIS 5.1/5.2 64-bit NDIS 5.1/5.2 32-bit NDIS 6.0/6.1 64-bit NDIS 6.0/6.1 Windows Server 2003 (x86) Windows Server 2003 (x64) Windows Server 2008 (x86) Windows Server 2008 Server Core (x86) Windows Server 2008 SP2 (x86) Windows Server 2008 (x64) Windows Server 2008 Server Core (x64) Windows Server 2008 SP2 (x64) Windows Server 2008 SP2 Server Core (x64) Windows Server 2008 R2 (x64) Windows Server 2008 R2 Server Core (x64) 3. Supported Features The 10GbE Converged Network Adapter NDIS Miniport Driver for Windows supports all NDIS 5.1/5.2/6.0/6.1 features. 4. Using the Driver This section provides procedures for using the QLogic 10GbE Converged Network Adapter NDIS Miniport Driver. 4.1 Creating the Driver Disk To create a driver disk: 1. Go to the QLogic Web site: http://driverdownloads.qlogic.com 2. Click the appropriate icon, either Fibre Channel Adapters or Converged Network Adapters. 3. In the selection list, select your adapter model in the second column, select your Windows platform in the third column, and then click the Go button. 4. Under Drivers, click the download link for the appropriate driver. 5. Read the license agreement, and then click Agree. 6. When prompted, select to save the driver to a temporary location on the hard drive or a blank disk. The disk should have the following file structure: qlge.inf Driver installation file qlge.sys QLogic 10GbE Converged Network Adapter NDIS Miniport Driver qlge.cat Catalog file Release.txt Release Notes
Readme.txt Installation instructions and other useful information (this file) 4.2 Installing the Driver The operating system manages and controls the driver installation process; the driver follows the process dictated by the operating system. The driver installation cannot deviate from this process. This section provides the most common ways of installing and upgrading the driver, as documented for each operating system. For other installation procedures, please consult the operating system manuals. This section contains procedures for the following: 4.2.1 Initial Installation of the Driver 4.2.2 Updating the Existing NDIS Miniport Driver 4.2.3 Updating the iscsi Function NULL Driver NOTE: The QLogic Converged Network Adapter is a multifunction device. When installed in a PNP system, the OS detects two functions for each adapter: Ethernet Controller and Fibre Channel Controller. The Ethernet Controller refers to the Ethernet (NDIS) function. 4.2.1 Initial Installation of the Driver Follow the appropriate procedure for your Windows operating system. To install the driver on Windows 2003: 1. Power down the system. 2. Insert the card into a proper PCI slot. 3. Power on the system. When the system boots up, the PNP subsystem opens a dialog box informing you that new hardware (Ethernet Controller) has been found and prompts you to install the driver. 4. If the driver is on a floppy disk, insert the disk into the floppy disk drive. 5. If the Hardware Update Wizard prompts you to connect to Windows Update to search for software, click No, and then click Next. 6. If installing from removable media, click Install the software automatically (recommended), and then click Next. The Update Wizard locates the driver and automatically completes the installation. 7. Or, if not installing from removable media, click Install from a list or specific location (Advanced), and then click Next. 8. Click Search for the best driver in these locations. 9. Select Include this location in the search and browse to the location of the driver, and then click Next. A warning message may appear regarding the Digital Signature for Windows Logo certification. 10. To continued installation, click Yes. 11. To complete installation, click Finish.
To install the driver on Windows 2008: 1. Power down the system. 2. Insert the card into a proper PCI slot. 3. Power on the system. When the system boots up, the PNP subsystem displays a dialog box informing you that new hardware (Ethernet Controller) has been found and prompts you to install the driver. 4. If the driver is in a removable media, follow these steps: a. Insert the media. b. Click Locate and install driver software (recommended). c. If the Hardware Update Wizard prompts you to search online, click Don't search online. d. Click Next. The Update wizard locates the driver and automatically completes the installation. 5. Or, if not installing from removable media, follow these steps: a. Click I don't have the disc. Show me other options. b. Click Browse my computer for driver software (advanced). c. Browse to the location of the driver, and then click Next. A warning message may appear regarding the Digital Signature for Windows Logo certification. 6. To continue installation, click Yes. 4.2.2 Updating the Existing NDIS Miniport Driver Follow the appropriate procedure for your Windows operating system. To update the driver on Windows 2003: 1. Launch the Device Manager by right-clicking My Computer, and then clicking Manage. 2. In the Computer Management dialog box, double-click Device Manager, and then click Network Adapters. 3. Right-click the Qlogic 10GbE PCI Ethernet Adapter to update, and then click Update Driver. 4. If the Hardware Update Wizard prompts you to connect to Windows Update to search for software, click No, and then click Next. 5. If installing from removable media, click Install the software automatically (recommended), and then click Next. The Update Wizard locates the driver and automatically completes the installation. 6. Or, if not installing from removable media, follow these steps: a. Cc lick Install from a list or specific location (Advanced), and then click Next. b. Click Search for the best driver in these locations. c. Click Include this location in the search, browse to the location of the driver, and then
click Next. A warning message may appear regarding the Digital Signature for Windows Logo certification. d. To continue installation, click Yes. To update the driver on Windows 2008: 1. To open the Device Manager: a. Right-click My Computer, and then click Manage. b. In the Computer Management dialog box, double-click Device Manager in the left pane. 2. In the right pane, double-click Network Adapters. 3. Right-click the QLogic 10GbE PCI Ethernet Adapter, and then click Update Driver. 4. If installing from removable media, follow these steps: a. Click Search automatically for updated driver software. b. If the Hardware Update Wizard prompts you to search online, click Don't search online. The Update Wizard locates the driver, and then automatically completes the installation. 5. If not installing from removable media, follow these steps: a. Click Browse my computer for driver software. b. Click I don't have the disk. Show me other options. c. Click Browse my computer for driver software (advanced). d. Browse to the location of the driver, and then click Next. A warning message may appear regarding the Digital Signature for Windows Logo Certification. 6. To continue with the installation, click Yes. 4.3 Removing the Driver To remove the driver in a Windows environment, uninstall it as a Plug and Play device as follows: 1. Turn off your computer. 2. Remove the device from your computer according to the manufacturer s instructions. NOTE: Generally, you do not have to use the Device Manager or the Hardware wizard to uninstall a Plug and Play device. After you remove the device from your computer and restart your computer, Windows recognizes that it has been removed. 5. Limitations No known limitations.
6. Additional Notes The following additional notes apply: When the driver is updated on one port of the adapter, the second adapter port may show the incorrect driver version. Both ports of the adapter should be updated with the new driver when the update is performed. To configure the jumbo frame for IPv6, issue following command at the command prompt after enabling the jumbo frame using QLogic Adapter properties: netsh int ipv6 set <index> mtu = 9014 Where <index> is the interface index number for the QLogic Adapter. 7. Contacting Support Please feel free to contact your QLogic approved reseller or QLogic Technical Support at any phase of integration for assistance. QLogic Technical Support can be reached by the following methods: Web: http://support.qlogic.com E-mail: support@qlogic.com Go to Top Copyright 2009. All rights reserved worldwide. QLogic, the QLogic logo, and the Powered by QLogic logo are registered trademarks of QLogic Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners.