epth Micrometer SERIES 329, 129, 229 Interchangeable Rod Type ø4mm interchangeable rods, with lapped measuring end, provide a wide measuring range in mm increments. Ratchet stop provides constant force. igital model 0-150mm 329-0- 1.6 x mm 6 0-300mm 329-1- 1.6 x mm 12 igit counter model 329-0- 0 - mm 229-1 63.5 x mm 1 0 - mm 229-2 1.6 x mm 1 0-50mm 229-9 63.5 x mm 2 0-50mm 229-113 1.6 x mm 2 Measuring rod lock. SPC output (Series 329). With digit counter (Series 229). 129-1 / igital model 0-6 329-350- 4 x.63 6 0-12 329-351- 4 x.63 12 igit counter model 0-4 229-12 2.5 x.63 4 0-4 229-131 4 x.63 4 0-6 229-128 2.5 x.63 6 0-6 229-132 4 x.63 6 Technical ata ccuracy: ±3µm/±.00015 for micrometer head feed (excluding quantizing error for digital models) ±(2+/5)µm for interchangeable rod, = Max. measuring length (mm) ±[.0001+.00005 (R/5)] R = Max. measuring length (inch) Fraction rounded up Resolution*: 0.001mm or.00005"/0.001mm (.0001 /0.001mm: 329-351-) Graduation**: 0.01mm or.001 Flatness of reference face: 1.3µm (.00005 ) for 63.5mm (2.5 ) width base, 2µm (.0001 ) for 1.6mm (4 ) width base Flatness of measuring rod face: 0.3µm Parallelism between reference face and measuring rod face: (4+/50)µm, = Max. measuring length (mm) [.000+.00004 (R/50)],R = Max. measuring length (inch) Fraction rounded up Measuring rod diameter: 4mm isplay*: C Battery*: SR44 (1 pc.), 938882 Battery life*: pprox. 1.2 years under normal use *igital models **nalog models Functions of igital Model 2-point Preset, Zero-setting, ata hold, utomatic power ON/OFF, ata output, Preset inch/mm conversion (inch/mm models) Function lock larm: ow voltage, Counting value composition error Optional ccessories for igital Model 05CZ662: SPC cable with data switch (1m) 05CZ663: SPC cable with data switch (2m) 02Z90B: SPC cable for U-WVE w/ data switch (0mm) 0 - mm 129-154 63.5 x mm 0 - mm 129-155 1.6 x mm 0-50mm 129-9 63.5 x mm 2 0-50mm 129-113 1.6 x mm 2 0-5mm 129-1 63.5 x mm 3 0-5mm 129-114 1.6 x mm 3 0 - mm 129-111 63.5 x mm 4 0 - mm 129-115 1.6 x mm 4 0-150mm 129-112 63.5 x mm 6 0-150mm 129-1 1.6 x mm 6 0-300mm 129-152 63.5 x mm 12 0-300mm 129-153 1.6 x mm 12 IMENSIONS 0-2 129-129 4 x.63 2 0-3 129-126 2.5 x.63 3 0-3 129-130 4 x.63 3 0-4 129-12 2.5 x.63 4 0-4 129-131 4 x.63 4 0-6 129-128 2.5 x.63 6 0-6 129-132 4 x.63 6 0-12 129-149 2.5 x.63 12 0-12 129-150 4 x.63 12 Range 18 3.5 4.2 2.3 3 60.9 Range 18 3 65.4 ø18.3 ø4 1.6 ø18.3 ø4 1.6 igital model nalog model -50
epth Micrometer SERIES 128 Technical ata ccuracy: ±3µm (±.00015 ) for micrometer head feed Graduation: 0.01mm or.001 Flatness of reference face: 1.3µm (.00005 ) for 63.5mm (2.5 ) width base, 2µm (.00008 ) for 1.6mm (4 ) width base Flatness of measuring rod face: 0.3µm ø4mm measuring rod. Measuring rod lock. Carbide-tipped measuring rod model is available. Ratchet stop provides constant force. 128-1 128-2 Range Order No. Base 0 - mm 128-1 63.5 x mm 0 - mm 128-3* 63.5 x mm 0 - mm 128-2 1.6 x mm 0 - mm 128-4* 1.6 x mm *with carbide-tipped measuring rod Range Order No. Base 0-1 128-5 2.5 x.63 0-1 128-6 4 x.63 epth Micro Checker SERIES 515 The epth Micro Checker is designed to check and help set the range-end points of a depth micrometer. Technical ata Block pitch accuracy: ±(1+/150)µm, = ength to check (mm) nvil block accuracy: ±0.5µm 515-5 515-51 Range Order No. Reference checking lengths available 0-150mm 515-5, 50, 5,, 1, 150mm 0-300mm 515-51, 50, 5,, 1, 150, 5, 0, 2, 0, 25, 300mm Range Order No. Reference checking lengths available 0-6 515-55 1, 2, 3, 4, 5, 6 IMENSIONS 515-51 5 50 515-5 9 345 300 25 0 2 0 5 150 1 180 150 1 5 50 9 2 92 92-51
BSOUTE igimatic epth Gage SERIES 51 The BSOUTE igimatic epth Gage keeps track of the origin point (once set) for the entire life of the battery. Base and measuring faces are hardened and micro-lapped. Optional wider extension bases are available. (up to 450mm range models) SPC data output. 51-1- 11400 Range Order No. Base (W x T) 0-150mm 51-1- / 51-1-* x 6mm 0-0mm 51-2- / 51-2-* x 6mm 0-300mm 51-3- / 51-3-* x 6 (6.3)mm 0-450mm 51-4- 0 x mm 0-600mm 51-5- 0 x mm 0-50mm 51-6- 0 x mm 0-0mm 51-- 0 x mm *IP6 Coolant Proof model IMENSIONS 5 2 (86.) 3.5 2- / 4-ø9 Over 300mm range models 33 (41.2) 0 5 8 65 Range Order No. Base (W x T) 0-6 51-211- / 51-261-* 3.93 x.23 0-8 51-212- / 51-262-* 3.93 x.23 0-12 51-213- / 51-263-* 3.93 x.23 0-18 51-214- 9.8 x.39 0-24 51-215- 9.8 x.39 0-30 51-2- 9.8 x.39 0-40 51-2- 9.8 x.39 *IP6 Coolant Proof model 51-3- 51-263- () (2.5) 65 13 Range Base thickness 0-150mm 23 6 0-0mm 28 6 0-300mm 403 (404) 6 (6.3) 0-450mm 635 0-600mm 85 0-50mm 935 0-0mm 10 ( ): Coolant Proof models 51-1- Technical ata ccuracy: ±0.02mm ( 0mm), ±0.03mm ( 300mm) ±0.05mm ( 600mm), ±0.06mm ( 50mm), ±0.0mm ( 0mm) (excluding quantizing error) Resolution: 0.01mm or.0005"/0.01mm Repeatability: 0.01mm isplay: C Scale type: BSOUTE electrostatic (electromagnetic)* type linear encoder Max. response speed: Unlimited Battery: SR44 (1 pc.), 938882 Battery life: pprox.,000 hours [3 years (1 year: 300mm / 12 models)]* under normal use ust/water protection level: IP6* *Coolant Proof models Functions Origin-set, Zero-setting, utomatic power on/off, ata output, inch/mm conversion (inch/mm models) larm: ow voltage, Counting value composition error Optional ccessories 959143: ata hold unit 959149: SPC cable with data switch (1m) 959150: SPC cable with data switch (2m) 02Z90C: SPC cable for U-WVE w/ data switch (0mm) 05CZ624: SPC cable with data switch (1m)* 05CZ6: SPC cable with data switch (2m)* 02Z90: SPC cable for U-WVE w/ data switch (0mm)* : Extension base (see page -55.) *For Coolant Proof models Measurement data output function is available with a water-resistant SPC cable. Up to 300mm range models ( ): Coolant Proof models 65 2.5-52
Vernier epth Gage SERIES 52 Base and measuring faces are hardened and micro-lapped. Made of hardened stainless steel. Optional wider extension bases are available. (up to 450mm range models) Technical ata Graduation: 0.05mm, 0.02mm or.001 52-1 Optional ccessories : Extension base (see page -55.) Fine adjustment 52-1 Range Order No. Vernier reading ccuracy Base (W x T) Remarks 0-150mm 52-1 0.05mm ±0.05mm x 6.5mm 0-150mm 52-121 0.02mm ±0.03mm x 6.5mm 0-150mm 52-1 0.02mm ±0.03mm x 6.5mm with fine adjustment 0-0mm 52-2 0.05mm ±0.05mm x 6.5mm 0-0mm 52-122 0.02mm ±0.03mm x 6.5mm 0-0mm 52-2 0.02mm ±0.03mm x 6.5mm with fine adjustment 0-300mm 52-3 0.05mm ±0.08mm x 6.5mm 0-300mm 52-123 0.02mm ±0.04mm x 6.5mm 0-300mm 52-3 0.02mm ±0.04mm x 6.5mm with fine adjustment 0-600mm 52-4 0.05mm ±0.mm 0 x mm 0-600mm 52-4 0.02mm ±0.05mm 0 x mm with fine adjustment 0-0mm 52-5 0.05mm ±0.15mm 0 x mm 0-0mm 52-5 0.02mm ±0.0mm 0 x mm with fine adjustment Range Order No. Vernier reading ccuracy Base (W x T) Remarks 0-6 52-111.001 ±.001 3.93 x. with fine adjustment 0-8 52-112.001 ±.001 3.93 x. with fine adjustment 0-12 52-113.001 ±.0015 9.8 x.39 with fine adjustment 0-24 52-114.001 ±.002 9.8 x.39 with fine adjustment 0-40 52-115.001 ±.003 9.8 x.39 with fine adjustment IMENSIONS 0 8 2.5 65 65 65 2.5 30 13 ø9 1 4 2- Over 300mm range models Up to 300mm range models 34.5 Range 0-150mm 260 0-0mm 3 0-300mm 4 0-600mm 800 0-0mm 10 11-53
26 (41.3) epth Gage SERIES 52, 51 Hook End Type The end of the main scale is hookshaped to allow depth and thickness measurements of a projected portion or lip in a hole, in addition to standard depth measurement. Fine-adjustment models are available. Optional wider extension bases are available. SPC output (Series 51). (Refer to the IX for details.) 52-401 igital model Range: 1 (2 and 3) Order No. Resolution ccuracy - 0mm (0-150mm) 51-4- 0.01mm ±0.03mm - 2mm (0-0mm) 51-5- 0.01mm ±0.03mm / igital model Range: 1 (2 and 3) Order No. Resolution ccuracy.4-6.4 (0-6 ) 51-264-.0005 / 0.01mm ±0.03mm.4-8.4 (0-8 ) 51-265-.0005 / 0.01mm ±0.03mm 51-4- 1= Reading on depth vernier 1 1= Reading on hook vernier 11400 Technical ata (excluding quantizing error for digital models) Resolution*: 0.01mm or.0005"/0.01mm Graduation**: 0.05mm or 0.02mm Repeatability*: 0.01mm isplay*: C Scale type*: BSOUTE electromagnetic linear encoder Max. response speed*: Unlimited Battery*: SR44 (1 pc.), 938882 Battery life*: pprox. 3 years under normal use ust/water protection level*: IP6 *igital models **nalog models Functions of igital Model Origin-set, Zero-setting, utomatic power on/off, ata output, inch/mm conversion (inch/mm models) larm: ow voltage, Counting value composition error Optional ccessories 05CZ624: SPC cable with data switch (1m)* 05CZ6: SPC cable with data switch (2m)* 02Z90: SPC cable for U-WVE w/ data switch (0mm)* : Extension base (see page -55.) *For digital models Range: 1 (2 and 3) Order No. Vernier reading ccuracy - 150mm (0-150mm) 52-401 0.05mm ±0.05mm - 0mm (0-0mm) 52-402 0.05mm ±0.05mm - 300mm (0-300mm) 52-403 0.05mm ±0.08mm with fine adjustment Range: 1 (2 and 3) Order No. Vernier reading ccuracy - 150mm (0-150mm) 52-411 0.02mm ±0.03mm - 0mm (0-0mm) 52-412 0.02mm ±0.03mm - 300mm (0-300mm) 52-413 0.02mm ±0.04mm 2 1= Reading on hook vernier Reading on depth vernier 3 IMENSIONS 2- (5.5) Range 0-150mm 24 0-0mm 29 2- Range 0-150mm 260 0-0mm 3 0-300mm 4 21 9.5 11-54
ial epth Gage SERIES 52 with Fine djustment Technical ata ial reading: 0.05mm or.001 Base size: x 6.5mm (W x T) Optional ccessory : Extension base Easy-to-read dial. Made of hardened stainless steel. Base and measuring faces are hardened and micro-lapped. Optional wider extension bases are available. 52-301-50 Range Order No. ial reading ccuracy 0-150mm 52-301-50 0.05mm ±0.05mm 0-0mm 52-302-50 0.05mm ±0.05mm 0-300mm 52-303-50 0.05mm ±0.08mm IMENSIONS 4 2-11 Range Order No. ial reading ccuracy 0-6 52-311-50.001 ±.001 0-8 52-312-50.001 ±.001 0-12 52-313-50.001 ±.0015 34.5 Range 0-150mm 260 0-0mm 3 0-300mm 4 Extension Bases Optional ccessories for epth Gage ttaches to the base (reference face) plate of a depth gage to extend its span. These extension bases cannot be attached to 0-600mm, 0-0mm, 0-24 and 0-40 range models. Extension base Size Order No. imensions a, b n 180mm 9003 mm, 55mm 2 260mm 90031 35mm, 60mm 5 3mm 90032 mm, 55mm 4 90032 Size Order No. imensions a, b n 90036 2.6, 2. 2 900368 1.38, 2.36 5 12 900369 2.6, 2. 4 ttaching the extension base ttach it to the depth gage base on a surface plate Extension base IMENSIONS b a a a b R5 R5 Mounting screw Washer epth gage base n-m4 P=0. No. 8-32UNC Order No. a b n 9003 180 55 2 90031 260 35 60 5 90032 3 55 4-55
BSOUTE igimatic/ial epth Gage SERIES 54, BSOUTE igimatic epth Gage keeps track of the origin point (once set) for the entire life of the battery (Series 54). Wide probing range is available with the supplied extension rod. Bottom surface of the base is hardened, ground and lapped for highest degree of flatness. 54-211 esigned with a back plunger type dial indicator for upward-facing reading. (231, 23, 238) SPC data output (Series 54). 211 231 214 Technical ata of igimatic Model (excluding quantizing error for digital models) Resolution: 0.01mm type 0.01mm 0.001mm type 0.001mm/0.001mm.0005 /0.01mm type.0005 /0.01mm.00005 /0.001mm type.0005 /.0001 /.00005 / 0.01mm/0.001mm Flatness of base face: 5µm or 2µm Contact point: Carbide-tipped ball point or needle Measuring force: 1.5N isplay: C Scale type: BSOUTE electrostatic linear encoder Max. response speed: Unlimited Battery: SR44 (1 pc.), 938882 Battery life: pprox.,000 hours under normal use Range Order No. Stroke ccuracy Extension rod Base (W x T, flatness) 0-0mm 54-211 12.mm ±µm 5 pcs. (,, 30, 30, mm) 63.5 x mm, 5µm 0-0mm 54-212 12.mm ±µm 5 pcs. (,, 30, 30, mm) 1.6 x mm, 5µm 0-0mm 54-1 12.mm ±5µm 5 pcs. (,, 30, 30, mm) 63.5 x mm, 2µm 0-0mm 54-2 12.mm ±5µm 5 pcs. (,, 30, 30, mm) 1.6 x mm, 2µm 0.01mm graduation / igital Type igital Type 0.001mm graduation Range Order No. Stroke ccuracy Extension rod Base (W x T, flatness) 0-8 54-2S.5 ±.001 4 pcs. (.5, 1, 2, 4 ) 2.5 x.63,.0002 0-8 54-218S.5 ±.001 4 pcs. (.5, 1, 2, 4 ) 4 x.63,.0002 0-8 54-S.5 ±.0002 4 pcs. (.5, 1, 2, 4 ) 2.5 x.63,.00008 0-8 54-8S.5 ±.0002 4 pcs. (.5, 1, 2, 4 ) 4 x.63,.00008 224 222 Technical ata of ial Model ial reading: 0.01mm or.001 Flatness of base face: 5µm or 2µm Contact point: Carbide-tipped ball point (needle point: 2, 222) Measuring force: 1.4N (2.5N: 213, 214, 2S, 218S) Functions of igital Model Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, Power ON/OFF, Simplified calculation, Function lock, ata hold, ata output, inch/mm conversion (inch/mm models) larm: ow voltage, Counting value composition error, Over-flow error, Tolerance limit setting error Optional ccessories for igital Model 905338: SPC cable (1m) 905409: SPC cable (2m) 02Z90F: SPC cable for U-WVE (0mm).0005 /0.01mm graduation.00005 /0.001mm/ graduation ial Type Range Order No. Stroke ccuracy Extension rod Base (W x T, flatness) 0 - mm 2* mm ±15µm 40 x mm, 5µm 0-0mm 211 mm ±15µm 5 pcs. (,, 30, 30, mm) 63.5 x mm, 5µm 0-0mm 212 mm ±15µm 5 pcs. (,, 30, 30, mm) 1.6 x mm, 5µm 0-2mm 213 30mm ±30µm 3 pcs. (30, 60, 90mm) 63.5 x mm, 5µm 0-2mm 214 30mm ±30µm 3 pcs. (30, 60, 90mm) 1.6 x mm, 5µm 0-0mm 2 mm ±15µm 5 pcs. (,, 30, 30, mm) x 18mm, 5µm 0-0mm 221 mm ±15µm 5 pcs. (,, 30, 30, mm) 150 x 18mm, 5µm 0 - mm 222* mm ±15µm 5 pcs. (,, 30, 30, mm) mm, 5µm 0 - mm 223 mm ±15µm 5 pcs. (,, 30, 30, mm) ømm, 5µm 0 - mm 224 mm ±15µm 5 pcs. (,, 30, 30, mm) ø40mm, 5µm 0-0mm 231 5mm ±15µm 5 pcs. (,, 30, 30, mm) 63.5 x mm, 5µm *with needle probe ial Type Range Order No. Stroke ccuracy Extension rod Base (W x T, flatness) 0-8 2S 1 ±.002 3 pcs. (1, 2, 4 ) 2.5 x.63,.0002 0-8 218S 1 ±.002 3 pcs. (1, 2, 4 ) 4 x.63,.0002 0-8 23.2 ±.002 4 pcs. (.5, 1, 2, 4 ) 2.5 x.63,.0002 0-8 238.2 ±.002 4 pcs. (.5, 1, 2, 4 ) 4 x.63,.0002-56
IMENSIONS () (114) 12 ø15.4 SR 0.2 ø40 12 35.5 114 () ø3 2 222 SR 0.2 35.5 65 (4) SR1.5 223 = ømm 224 = ø40mm 8 35.5 () () 211 = 63.5mm 212 = 1.6mm (11) (35) (30) (4) 14 (11) (35) ø6 ø6 ø6.5 ø11 SR1.5 213, 2S = 63.5mm 214, 218S = 1.6mm () () 2 (35.) 50 (18) ø39 () () (18) (35.) ø6.5 ø11 5 150 221 (64) (5) (35) (11) ø6 M2.5x0.45 231, 23 = 63.5mm 238 = 1.6mm 22 9 (6) () (35) (11) (5) ø6 SR1.5 54-211, 54-1, 54-2, 54- = 63.5mm 54-212, 54-2, 54-218, 54-8 = 1.6mm -5
Tire Tread epth Gage SERIES 51, 0 BSOUTE igimatic Tread epth Gage keeps track of the origin point (once set) for the entire life of the battery (Series 51). Range Order No. ccuracy 0 - mm 51-MOT- ±0.02mm 0 - mm 0-4 ±0.2mm IMENSIONS Specially designed to measure tire tread depth. Plastic construction for lightweight use (Series 0). With SPC data output (Series 51). 0-4 / Range Order No. ccuracy 0-1 51-0MOT- ±.0005 0-1 0-5 ±.008 Technical ata (excluding quantizing error Resolution: 0.01mm or.0005"/0.01mm (51 Series) 0.1mm or.001 /0.1mm (0 Series) isplay: C Battery: SR44 (1 pc.), 938882 Battery life: pprox. 2 years under normal use (approx. 00 hours: Series 51) Functions Origin-set*, Zero-setting, ata output* Power ON/OFF, inch/mm conversion (inch/mm models) larm: ow voltage, Counting value composition error * Series 51 Optional ccessories for Series 51 959143: ata hold unit 959149: SPC cable with data switch (1m) 959150: SPC cable with data switch (2m) 02Z90C: SPC cable for U-WVE w/ data switch (0mm) 8.2 113 83 0.8 (60) ø3 (3.5) 60 4.3 ø1.5 ø3 4 13 29 ø3 51-MOT- 0-4 epth Base ttachment Optional ccessory for Calipers For mm, 150mm, 0mm, 300mm, 4, 6, 8 and 12 vernier and dial calipers which have a depth measuring bar. Finely ground base surface and secure locking clamp. 050084- epth base attachment IMENSIONS e a b d Size a b c d e 5mm 5 24.5 9 mm 24.5 9 1mm 30 1 28.5 11.5 f: Base thickness c Size Order No. pplicable measuring range of caliper 5mm 050083- mm, 15mm, 0mm, 4, 6 and 8 mm 050084- mm, 15mm, 0mm, 4, 6 and 8 1mm 050085-300mm and 12-58