TECHNICAL GUIDE ACCLIMATE TM SERIES SPLIT-SYSTEM HEAT PUMPS 18 SEER R-410A 1 PHASE 2 THRU 5 NOMINAL TONS S: HL8B024 THRU 060 Due to continuous product improvement, specifications are subject to change without notice. Visit us on the web at www.upgnet.com and www.luxaire.com Additional rating information can be found at www.ahridirectory.org WARRANTY SUMMARY* Extended 10-Years limited parts warranty. Extended Lifetime limited compressor warranty. Extended parts and compressor warranties require online registration within 90 days of purchase for replacement or closing for new home construction. *Does not apply to R-22 models, 3-Phase models, or internet sales. See Limited Warranty certificate in User's Information Manual for details. DESCRIPTION The 18 SEER Series unit is the outdoor part of a versatile climate system. It is designed with a matching indoor coil component from Johnson Controls Unitary Products. Available for typical applications, this climate system is supported with accessories and documents to serve specific functions. FEATURES Superior Coil Protection - A stamped, decorative metal coil guard protects the tube-in-fin coil from debris and other damaging material. Protected Compressor - The compressor is safeguarded against abnormal pressures and temperatures by an internal pressure relief valve, an internal temperature sensor, and factory high and low pressure system controls. A factory installed liquid line filter-drier further protects the compressor against moisture and debris. Environmentally Friendly Refrigerant - The next generation refrigerant R-410A delivers environmentally friendly performance with zero ozone depletion. Durable Finish - An automotive quality finish provides the ultimate protection from harmful UV rays and rust creep, ensuring a long-lasting, high quality appearance. A powder-paint topcoat is applied over a baked-on primer using a galvanized, zinc coated steel base material. The result is a finish that has been proven in testing to provide 33% greater durability than conventional powder-coat finishes. Hot Heat Pump - An optional mode that slows the indoor fan for higher register air temperatures and premium comfort. SilentDrive TM System - Features combination of swept-wing fan, composite base pan, isolated compressor compartment, and two-stage compressor to reduce overall sound to a mere whisper. Low RPM ECM Fan Motor - Helps to reduce airflow noise. Swept Wing Fan - A fan design boasting technology adapted from aeronautic and defense engineering provides for whisperquiet operation by allowing air to flow smoothly and efficiently across the fan tips. Composite Base Pan - The strong and durable composite base pan provides added strength while resisting rust and corrosion, as well as reducing sound and vibration. Isolated Compressor Compartment - A molded composite bulkhead isolates the refrigeration components and the compressor from the rest of the unit, reducing sound and vibration. Lower Installed Cost - Designed to provide enhanced installability by featuring a slide-down control compartment that allows easy access to control components, along with angled service valves to reduce overall installation time and cost. Factory charged for a 15 foot lineset. Factory Installed Filter-Drier - A factory installed, solid core liquid line filter-drier removes harmful debris and moisture from the system. Easy Service Access - A full end, full service access panel with handle makes for easy entry to internal components. Communications Capable - Requiring only a simple 4-wire installation, the communicating capability enables the use of the Touch Screen Communicating Control, allowing real time visibility of system operation and the use of diagnostic features, while still maintaining the ability to function with a traditional thermostat. Complete System Control - These heat pumps utilize an unique microprocessor defrost control system to provide optimal comfort as well as monitor the overall system for reliable operation. In the event improper operating conditions occur (high temperature and/or high pressure), the system will automatically shut the system down to extend the life of the heat pump. The defrost control features an internal memory to aid the technician in troubleshooting, reducing service time and cost. Premium System Warranty - Limited lifetime compressor warranty when registered online within 90 days of installation. Agency Listed - Safety certified by CSA to UL 1995 / CSA 22.2. Performance certified to ANSI/AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program. FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
Physical and Electrical Data HL8B024F4C HL8B036F4C HL8B048F4C HL8B060F4C Unit Supply Voltage 208-230V, 1 60Hz Normal Voltage Range 1 187 to 252 Minimum Circuit Ampacity 17.5 21.8 29.2 36.9 Max. Overcurrent Device Amps 2 25 35 50 60 Min. Overcurrent Device Amps 3 20 25 30 40 Type 2-Stage Scroll 2-Stage Scroll 2-Stage Scroll 2-Stage Scroll Compressor Amps Rated Load 11.8 15.2 21.1 27.3 Locked Rotor 58 83 104 153 Crankcase Heater No No No No Factory External Discharge Muffler Yes Yes Yes Yes Factory External Check Valve No No No No HS Kit Required with TXV 4 No No No No Fan Diameter Inches 24 24 24 24 Rated HP 1/3 1/3 1/3 1/3 Fan Motor Rated Load Amps 2.8 2.8 2.8 2.8 Nominal RPM 685 685 685 685 Nominal CFM 2990 3345 3300 3460 Face Area Sq. Ft. 23.6 23.6 23.6 23.6 Coil Rows Deep 2 2 2 2 Fins / Inch 16 16 14 14 Liquid Line OD (in) (Field Installed) 3/8 3/8 3/8 3/8 Vapor Line OD (in) (Field Installed) 3/4 3/4 7/8 7/8 Unit Charge (Lbs. - Oz.) 5 14-15 11-8 13-1 14-4 Charge Per Foot, Oz. 0.62 0.62 0.67 0.67 Operating Weight Lbs. 295 295 320 325 1. Rated in accordance with AHRI Standard 110-2012, utilization range A. 2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection. 3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection. 4. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model. 5. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract the amount of refrigerant, using the difference in actual lineset length (not equivalent length) multiplied by the per foot value. Unit Model Dimensions (Inches) Refrigerant Connection Service Valve Size A B C Liquid Vapor A 24 40 42-1/4 34 36 40 42-1/4 34 48 40 42-1/4 34 60 40 42-1/4 34 3/8 3/4 7/8 All dimensions are in inches and are subject to change without notice. VAPOR LIQUID 2-3/8 3-1/8 6-1/2 C B Overall height is from bottom of base pan to top of fan guard. Overall length and width include screw heads. 2 Johnson Controls Unitary Products
System Charge for Various Matched Systems Outdoor Unit HL8B024F4C HL8B036F4C HL8B048F4C HL8B060F4C Required TXV 1 4G1 4G1 4H1 4K1 Indoor Unit 2,3,4 TXV Kit 5 - Additional Charge, Oz AHE42D 17 AHE60D 13 23 AHV24B 0 AHV30B 0 AHV36C 0 0 AHV42D 17 AHV48D 18 0 AHV60D 13 23 FC/MC/PC37 0 0 FC/MC/PC43 0 0 FC/MC/PC48 24 17 10 FC/MC/PC60 33 18 0 0 FC/MC62 44 13 23 FC64 55 35 34 UC48 24 17 10 UC60 33 18 0 0 Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil only matches, please see the COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils table. FOOTNOTES: 1. For applications requiring a TXV use S1-1TVM*** series kit. 2. A TXV kit must be used with these indoor units to obtain system performance. 3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224. 4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications. 5. Refer to Cooling and Heating Performance Data tables for actual performance for specified system matches. PROCEDURES 1. Unit factory charge listed on the unit nameplate includes refrigerant for the outdoor unit, the smallest matched indoor unit, and 15 feet of interconnecting line tubing. 2. Verify the TXV and additional charge required for specific matched indoor unit in the system using the above table. 3. Add additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table. 4. For indoor matches requiring additional charge, the refrigerant needs to be weighed in for specific matched indoor unit and actual lineset length. 5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + charge adder for matched indoor unit + charge adder for actual lineset length. Johnson Controls Unitary Products 3
COOLING CAPACITY - With Air Handler Coils HL8B024F4C HL8B036F4C For notes, see Page 5. AIR HANDLER WIDTH STAGE AHV24B 17.5 AHV30B 17.5 AHV36C 21.0 MV12B 17.5 FC/MC43B MV12D 24.5 FC/MC48D MV12D 24.5 FC/MC60D AHE42D 24.5 AHV36C 21.0 AHV42D 24.5 AHV48D 24.5 MV12B 17.5 FC/MC43B MV12D 24.5 FC/MC48D MV12D 24.5 FC/MC60D MV12D 24.5 MV12D 24.5 MV16C 21.0 FC/MC43C MV16C 21.0 FC/MC48C MV20D 24.5 FC/MC48D MV20D 24.5 FC/MC60D MV20D 24.5 MV20D 24.5 MX12BN21 17.5 FC/MC43B MX12DN21 24.5 FC/MC48D MX12DN21 24.5 FC/MC60D MX12DN21 24.5 RATED CFM 18 SEER HP WITH AIR HANDLERS TOTAL COOLING NET MBH SENS. SEER EER 1 470 19.7 13.6 20.00 2 710 22.6 15.6 13.00 1 500 19.9 13.8 20.25 2 775 22.8 16.2 13.00 1 485 20.1 13.9 21.00 16.75 2 760 23.0 16.4 13.50 1 620 20.5 14.2 22.00 16.75 2 800 23.4 16.8 13.50 1 595 20.5 14.1 2 905 24.0 18.0 14.00 1 645 20.5 14.2 17.50 2 835 23.8 17.3 14.00 1 685 28.2 18.4 22.75 2 1180 35.4 25.5 13.75 1 785 29.0 19.5 23.25 17.75 2 1215 35.2 25.5 13.25 1 790 29.2 19.6 24.00 18.25 2 1180 35.4 25.5 13.75 1 835 29.6 20.0 24.25 18.50 2 1155 35.6 25.3 13.75 1 805 29.2 19.6 23.00 17.50 2 1225 35.4 25.7 13.25 1 785 29.2 19.5 23.50 18.00 2 1160 35.4 25.5 13.75 1 735 28.6 18.8 22.75 17.50 2 1135 35.2 24.9 13.50 1 770 29.0 19.4 23.50 18.00 2 1235 36.0 26.6 14.00 1 780 30.2 20.2 24.50 18.50 2 1155 36.6 26.7 14.25 1 775 28.8 19.2 2 1200 35.4 25.5 13.50 1 775 29.2 19.5 23.50 18.00 2 1200 35.2 25.3 13.50 1 860 29.6 20.4 23.50 18.00 2 1300 36.0 26.9 13.75 1 860 29.8 20.2 23.75 18.00 2 1300 36.2 26.7 13.75 1 860 29.6 20.4 23.50 18.00 2 1300 36.4 27.3 14.00 1 860 30.6 21.0 24.75 18.75 2 1300 37.3 28.1 14.25 1 740 28.8 19.2 2 1125 34.8 24.6 13.00 1 830 29.6 20.0 24.00 18.25 2 1125 35.2 25.1 13.75 1 845 29.6 20.0 24.00 18.25 2 1150 35.6 25.3 14.00 1 880 30.8 21.4 25.25 19.00 2 1175 36.8 26.7 14.25 4 Johnson Controls Unitary Products
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number. = Not applicable. MA Modular Air Handlers use Coil Only Ratings. 1109433-LTG-A-0714 COOLING CAPACITY - With Air Handler Coils (Continued) AIR HANDLER COOLING RATED NET MBH WIDTH STAGE SEER EER CFM TOTAL SENS. 18 SEER HP WITH AIR HANDLERS AHE60D 24.5 1 1160 39.5 27.3 16.75 2 1565 45.5 33.6 12.50 AHV48D 24.5 1 1010 39.0 25.5 22.75 16.75 2 1585 45.5 32.8 12.00 AHV60D 24.5 1 1000 38.5 25.7 16.75 2 1570 45.5 33.4 12.00 MV16C 21.0 FC/MC48C 1 1035 39.0 25.9 2 1625 45.5 33.2 12.00 MV16C 21.0 FC60C 1 1035 39.0 25.7 2 1625 45.5 33.2 12.00 HL8B048F4C MV20D 24.5 FC/MC48D 1 1025 39.0 25.9 2 1620 45.5 33.4 12.25 MV20D 24.5 FC/MC60D 1 1020 39.0 25.7 2 1600 45.5 33.2 12.00 MV20D 24.5 1 1085 39.0 26.5 23.00 17.00 2 1645 46.0 34.5 12.50 MV20D 24.5 1 1075 40.5 27.5 24.00 17.50 2 1630 47.0 35.2 12.50 MX16CN21 21.0 FC/MC48C 1 1015 39.0 25.9 2 1600 45.0 33.2 12.00 MX16CN21 21.0 FC60C 1 1020 39.0 25.7 2 1600 45.5 33.2 12.00 AHE60D 24.5 1 1160 46.5 29.5 21.00 15.25 2 1835 57.0 40.5 11.75 AHV60D 24.5 1 1090 46.0 28.9 21.00 15.25 2 1635 56.0 38.0 11.75 HL8B060F4C MV20D 24.5 FC/MC60D 1 1160 47.0 29.3 21.00 15.00 2 1845 56.5 39.0 11.75 MV20D 24.5 1 1185 47.0 30.1 21.50 15.50 2 1845 57.0 40.5 12.00 MV20D 24.5 1 1160 48.5 30.7 22.00 15.75 2 1855 58.0 41.5 11.75 Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240. Cooling MBH based on 80 F entering air temperature, 50% RH (Relative Humidity), and rated air flow. EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95 F (for high stage operation) or 67 F (for low stage operation) outdoor ambient divided by the total electric power in watt-hours at those conditions. SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power input in watt-hours during the same period. Johnson Controls Unitary Products 5
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings) COIL COOLING WIDTH CFM RANGE RATED NET MBH (MIN.-MAX.) STAGE CFM TOTAL SENS. SEER 1 EER 18 SEER HP COIL ONLY RATINGS HL8B024F4C FC/MC/PC48 21.0,24.5 550 650 1 600 19.7 13.6 21.00 650 950 2 800 22.8 16.3 11.75 HL8B036F4C FC/MC62 24.5 800 1000 1 900 29.2 20.0 19.50 15.50 1000 1400 2 1200 35.2 25.5 12.50 HL8B048F4C FC/MC62 24.5 1000 1400 1 1200 39.0 26.9 19.25 1400 1800 2 1600 45.0 33.2 11.50 HL8B060F4C FC/MC62 24.5 1150 1550 1 1350 47.0 30.9 18.50 13.75 1600 2000 2 1800 56.0 39.5 11.25 1. Requires a 2FD06700224 Blower Time Delay unless a standard furnace is equipped with one. MA Modular Air Handlers use Coil Only Ratings. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. COOLING CAPACITY - With High Efficiency Motor Furnaces FURNACE COOLING WIDTH RATED NET MBH STAGE CFM TOTAL SENS. 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 HL8B024F4C For notes, see Page 23. T*(8,L)V*A12 14.5 FC/MC/PC37A T*(8,L)V*B12 17.5 FC/MC/PC43B T*(8,L)V*C16 21.0 FC/MC/PC43C T*9V*A10 14.5 FC/MC/PC37A T*9V*B12 17.5 FC/MC/PC43B T*9V*C16 21.0 FC/MC/PC48C T*9V*C16 21.0 T*9V*C16 21.0 UC48C T*9V*C16 21.0 T*9V*C20 21.0 FC/MC/PC43C T*9V*C20 21.0 FC/MC/PC48C T*9V*C20 21.0 UC48C TM8X080C16MP11 21.0 FC/MC/PC43C TM8X080C16MP11 21.0 FC/MC/PC48C TM8X080C16MP11 21.0 TM8X080C16MP11 21.0 UC48C TM8X080C16MP11 21.0 SEER EER 1 585 20.5 14.1 21.75 16.75 2 765 23.0 16.4 13.25 1 515 20.1 13.9 21.00 16.00 2 790 23.2 16.7 13.50 1 645 20.7 14.3 17.00 2 770 23.2 16.6 13.50 1 570 20.1 14.0 21.25 16.00 2 790 23.0 16.4 12.50 1 550 20.3 14.1 21.50 16.75 2 800 23.2 16.7 13.25 1 635 20.7 14.3 22.75 2 890 23.8 17.7 13.50 1 635 20.5 14.2 17.50 2 890 24.0 17.8 13.75 1 635 21.1 14.6 23.75 16.75 2 890 23.8 17.8 13.50 1 635 20.5 14.2 17.50 2 890 24.0 17.8 13.75 1 630 20.7 14.3 2 890 23.8 17.8 13.50 1 630 20.7 14.3 22.75 2 890 23.8 17.7 13.50 1 630 21.1 14.6 23.75 16.75 2 890 23.8 17.8 13.50 1 630 20.5 14.2 22.00 16.75 2 800 23.2 16.6 12.75 1 630 20.5 14.2 16.75 2 800 23.2 16.6 12.75 1 630 20.5 14.2 17.50 2 800 23.4 17.0 12.75 1 630 20.9 14.4 23.25 2 800 23.0 16.6 12.75 1 630 20.5 14.2 17.50 2 800 23.4 17.0 12.75 6 Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B024F4C For notes, see Page 23. FURNACE WIDTH STAGE TM8X100C16MP11 21.0 FC/MC/PC43C TM8X100C16MP11 21.0 FC/MC/PC48C TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 UC48C TM8X100C16MP11 21.0 TMLX080C16MP11 21.0 FC/MC/PC43C TMLX080C16MP11 21.0 FC/MC/PC48C TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 UC48C TMLX080C16MP11 21.0 TMLX100C16MP11 21.0 FC/MC/PC43C TMLX100C16MP11 21.0 FC/MC/PC48C TMLX100C16MP11 21.0 TMLX100C16MP11 21.0 UC48C TMLX100C16MP11 21.0 L*LC*A12 14.5 FC/MC/PC37A L*LC*B12 17.5 FC/MC/PC43B L*LC*C16 21.0 FC/MC/PC43C L*9C*B12 17.5 FC/MC/PC43B L*9C*C16 21.0 FC/MC/PC48C L*9C*C16 21.0 L*9C*C16 21.0 UC48C L*9C*C16 21.0 L*9C*C20 21.0 FC/MC/PC43C L*9C*C20 21.0 FC/MC/PC48C L*9C*C20 21.0 UC48C RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 COOLING NET MBH 1109433-LTG-A-0714 1 630 20.5 14.2 22.00 16.75 2 800 23.2 16.6 12.75 1 630 20.5 14.2 16.75 2 800 23.2 16.6 12.75 1 630 20.5 14.2 17.50 2 800 23.4 17.0 12.75 1 630 20.9 14.4 23.25 2 800 23.0 16.6 12.75 1 630 20.5 14.2 17.50 2 800 23.4 17.0 12.75 1 630 20.5 14.2 22.00 16.75 2 800 23.2 16.6 12.75 1 630 20.5 14.2 16.75 2 800 23.2 16.6 12.75 1 630 20.5 14.2 17.50 2 800 23.4 17.0 12.75 1 630 20.9 14.4 23.25 2 800 23.0 16.6 12.75 1 630 20.5 14.2 17.50 2 800 23.4 17.0 12.75 1 630 20.5 14.2 22.00 16.75 2 800 23.2 16.6 12.75 1 630 20.5 14.2 16.75 2 800 23.2 16.6 12.75 1 630 20.5 14.2 17.50 2 800 23.4 17.0 12.75 1 630 20.9 14.4 23.25 2 800 23.0 16.6 12.75 1 630 20.5 14.2 17.50 2 800 23.4 17.0 12.75 1 585 20.5 14.1 21.75 16.75 2 765 23.0 16.4 13.25 1 515 20.1 13.9 21.00 16.00 2 790 23.2 16.7 13.50 1 645 20.7 14.3 17.00 2 770 23.2 16.6 13.50 1 550 20.3 14.1 21.50 16.75 2 800 23.2 16.7 13.25 1 635 20.7 14.3 22.75 2 890 23.8 17.7 13.50 1 635 20.5 14.2 17.50 2 890 24.0 17.8 13.75 1 635 21.1 14.6 23.75 16.75 2 890 23.8 17.8 13.50 1 635 20.5 14.2 17.50 2 890 24.0 17.8 13.75 1 630 20.7 14.3 2 890 23.8 17.8 13.50 1 630 20.7 14.3 22.75 2 890 23.8 17.7 13.50 1 630 21.1 14.6 23.75 16.75 2 890 23.8 17.8 13.50 Johnson Controls Unitary Products 7 TOTAL SENS. SEER EER
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B036F4C For notes, see Page 23. FURNACE WIDTH STAGE T*(8,L)V*A12 14.5 FC/MC/PC37A T*(8,L)V*B12 17.5 FC/MC/PC43B T*(8,L)V*C16 21.0 FC/MC/PC43C T*(8,L)V*C16 21.0 FC/MC/PC48C T*(8,L)V*C16 21.0 T*(8,L)V*C16 21.0 UC48C T*(8,L)V*C16 21.0 T*(8,L)V*C20 21.0 FC/MC/PC43C T*(8,L)V*C20 21.0 FC/MC/PC48C T*(8,L)V*C20 21.0 T*(8,L)V*C20 21.0 UC48C T*(8,L)V*C20 21.0 T*9V*B12 17.5 FC/MC/PC43B T*9V*C16 21.0 FC/MC/PC43C T*9V*C16 21.0 FC/MC/PC48C T*9V*C16 21.0 T*9V*C16 21.0 UC48C T*9V*C16 21.0 T*9V*C20 21.0 FC/MC/PC43C T*9V*C20 21.0 FC/MC/PC48C T*9V*C20 21.0 T*9V*C20 21.0 UC48C T*9V*C20 21.0 T*9V*D20 24.5 FC/MC/PC48D T*9V*D20 24.5 RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TOTAL COOLING NET MBH SENS. SEER EER 1 730 28.2 18.5 21.50 2 1150 34.6 24.5 12.50 1 860 29.4 20.0 17.00 2 1275 35.2 25.7 12.50 1 770 28.8 19.2 2 1190 35.2 25.3 13.25 1 725 28.4 18.6 17.00 2 1195 35.6 25.7 13.50 1 710 28.6 18.8 22.75 17.50 2 1185 35.4 25.1 13.50 1 810 28.8 19.4 17.50 2 1210 35.8 25.9 13.50 1 810 28.8 19.4 23.50 17.75 2 1195 35.2 25.3 13.50 1 740 28.6 18.8 2 1190 35.2 25.3 13.25 1 715 28.4 18.6 2 1150 35.2 25.1 13.50 1 800 29.2 19.6 23.00 17.75 2 1215 35.8 25.7 13.50 1 720 28.2 18.3 2 1155 35.6 25.3 13.75 1 800 28.8 19.4 23.50 17.75 2 1215 35.2 25.3 13.50 1 815 29.2 19.6 2 1200 34.8 25.1 12.75 1 815 29.2 19.6 2 1240 35.2 25.7 13.00 1 780 29.2 19.5 23.50 18.00 2 1195 35.0 25.1 13.25 1 810 29.4 19.6 22.75 17.50 2 1235 35.6 25.7 13.25 1 780 28.6 19.1 23.00 17.75 2 1195 35.4 25.1 13.25 1 810 29.0 19.4 2 1235 35.2 25.7 13.00 1 780 28.8 19.3 22.75 2 1200 35.2 25.3 13.25 1 745 28.8 18.9 2 1330 36.0 26.7 13.00 1 770 29.0 19.2 23.00 17.50 2 1330 36.2 26.7 13.25 1 755 28.4 18.7 22.00 2 1330 36.0 26.9 13.00 1 770 28.6 19.0 2 1330 35.8 26.5 13.00 1 830 29.4 19.8 23.00 17.75 2 1240 35.6 26.1 13.50 1 830 29.6 19.8 23.25 17.75 2 1225 35.8 25.9 13.50 8 Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B036F4C For notes, see Page 23. FURNACE WIDTH STAGE T*9V*D20 24.5 T*9V*D20 24.5 T*9V*D20 24.5 UC48D T*9V*D20 24.5 UC60D TM8X060A12MP11 14.5 FC/MC/PC37A TM8X080B12MP11 17.5 FC/MC/PC43B TM8X080C16MP11 21.0 FC/MC/PC43C TM8X080C16MP11 21.0 FC/MC/PC48C TM8X080C16MP11 21.0 FC/MC/PC48D TM8X080C16MP11 21.0 TM8X080C16MP11 21.0 TM8X080C16MP11 21.0 TM8X080C16MP11 21.0 TM8X080C16MP11 21.0 UC48C TM8X080C16MP11 21.0 UC48D TM8X080C16MP11 21.0 TM8X080C16MP11 21.0 UC60D TM8X100C16MP11 21.0 FC/MC/PC43C TM8X100C16MP11 21.0 FC/MC/PC48C TM8X100C16MP11 21.0 FC/MC/PC48D TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 UC48C RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TOTAL COOLING NET MBH SENS. 1109433-LTG-A-0714 SEER EER 1 835 29.4 20.0 23.00 17.75 2 1235 35.8 26.5 13.50 1 835 30.4 20.8 24.00 18.25 2 1235 36.8 27.1 13.75 1 830 29.0 19.5 17.50 2 1240 35.8 26.1 13.50 1 830 29.0 19.6 22.75 17.50 2 1225 35.4 25.7 13.25 1 770 28.8 19.2 2 1125 34.6 24.4 12.75 1 805 28.8 19.2 2 1175 34.6 24.4 12.75 1 775 28.8 19.2 2 1150 34.8 24.6 13.25 1 775 29.2 19.5 23.50 18.00 2 1150 35.2 25.3 13.50 1 805 29.2 19.5 23.50 18.00 2 1175 35.2 25.3 13.50 1 800 29.4 19.6 23.75 18.25 2 1175 35.4 25.3 13.50 1 785 29.2 19.6 23.50 18.00 2 1175 35.6 25.9 13.50 1 790 29.2 19.4 23.75 18.00 2 1175 35.4 25.3 13.50 1 795 30.2 20.2 24.50 18.50 2 1175 36.4 26.5 13.75 1 775 28.6 19.1 23.00 17.75 2 1150 35.4 25.3 13.50 1 805 28.6 19.1 23.00 17.75 2 1175 35.4 25.3 13.50 1 790 28.8 19.4 23.50 17.75 2 1175 35.2 25.3 13.25 1 800 28.8 19.4 23.50 17.75 2 1175 35.2 25.3 13.50 1 775 28.8 19.2 2 1150 34.8 24.6 13.25 1 775 29.2 19.5 23.50 18.00 2 1150 35.2 25.3 13.50 1 805 29.2 19.5 23.50 18.00 2 1175 35.2 25.3 13.50 1 800 29.4 19.6 23.75 18.25 2 1175 35.4 25.3 13.50 1 785 29.2 19.6 23.50 18.00 2 1175 35.6 25.9 13.50 1 790 29.2 19.4 23.75 18.00 2 1175 35.4 25.3 13.50 1 795 30.2 20.2 24.50 18.50 2 1175 36.4 26.5 13.75 1 775 28.6 19.1 23.00 17.75 2 1150 35.4 25.3 13.50 Johnson Controls Unitary Products 9
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B036F4C For notes, see Page 23. FURNACE WIDTH STAGE TM8X100C16MP11 21.0 UC48D TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 UC60D TMLX060A12MP11 14.5 FC/MC/PC37A TMLX080B12MP11 17.5 FC/MC/PC43B TMLX080C16MP11 21.0 FC/MC/PC43C TMLX080C16MP11 21.0 FC/MC/PC48C TMLX080C16MP11 21.0 FC/MC/PC48D TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 UC48C TMLX080C16MP11 21.0 UC48D TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 UC60D TMLX100C16MP11 21.0 FC/MC/PC43C TMLX100C16MP11 21.0 FC/MC/PC48C TMLX100C16MP11 21.0 FC/MC/PC48D TMLX100C16MP11 21.0 TMLX100C16MP11 21.0 TMLX100C16MP11 21.0 TMLX100C16MP11 21.0 TMLX100C16MP11 21.0 UC48C TMLX100C16MP11 21.0 UC48D RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TOTAL COOLING NET MBH SENS. SEER EER 1 805 28.6 19.1 23.00 17.75 2 1175 35.4 25.3 13.50 1 790 28.8 19.4 23.50 17.75 2 1175 35.2 25.3 13.25 1 800 28.8 19.4 23.50 17.75 2 1175 35.2 25.3 13.50 1 770 28.8 19.2 2 1125 34.6 24.4 12.75 1 805 28.8 19.2 2 1175 34.6 24.4 12.75 1 775 28.8 19.2 2 1150 34.8 24.6 13.25 1 775 29.2 19.5 23.50 18.00 2 1150 35.2 25.3 13.50 1 805 29.2 19.5 23.50 18.00 2 1175 35.2 25.3 13.50 1 800 29.4 19.6 23.75 18.25 2 1175 35.4 25.3 13.50 1 785 29.2 19.6 23.50 18.00 2 1175 35.6 25.9 13.50 1 790 29.2 19.4 23.75 18.00 2 1175 35.4 25.3 13.50 1 795 30.2 20.2 24.50 18.50 2 1175 36.4 26.5 13.75 1 775 28.6 19.1 23.00 17.75 2 1150 35.4 25.3 13.50 1 805 28.6 19.1 23.00 17.75 2 1175 35.4 25.3 13.50 1 790 28.8 19.4 23.50 17.75 2 1175 35.2 25.3 13.25 1 800 28.8 19.4 23.50 17.75 2 1175 35.2 25.3 13.50 1 775 28.8 19.2 2 1150 34.8 24.6 13.25 1 775 29.2 19.5 23.50 18.00 2 1150 35.2 25.3 13.50 1 805 29.2 19.5 23.50 18.00 2 1175 35.2 25.3 13.50 1 800 29.4 19.6 23.75 18.25 2 1175 35.4 25.3 13.50 1 785 29.2 19.6 23.50 18.00 2 1175 35.6 25.9 13.50 1 790 29.2 19.4 23.75 18.00 2 1175 35.4 25.3 13.50 1 795 30.2 20.2 24.50 18.50 2 1175 36.4 26.5 13.75 1 775 28.6 19.1 23.00 17.75 2 1150 35.4 25.3 13.50 1 805 28.6 19.1 23.00 17.75 2 1175 35.4 25.3 13.50 10 Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B036F4C For notes, see Page 23. FURNACE WIDTH STAGE TMLX100C16MP11 21.0 TMLX100C16MP11 21.0 UC60D TM9E060B12MP11 17.5 FC/MC/PC43B TM9E080B12MP11 17.5 FC/MC/PC43B TM9E080C16MP11 21.0 FC/MC/PC48D TM9E080C16MP11 21.0 TM9E080C16MP11 21.0 TM9E080C16MP11 21.0 UC48D TM9E100C16MP11 21.0 FC/MC/PC48D TM9E100C16MP11 21.0 TM9E100C16MP11 21.0 TM9E100C16MP11 21.0 UC48D TM9X060B12MP11 17.5 FC/MC/PC43B TM9X080B12MP11 17.5 FC/MC/PC43B TM9X080C16MP11 21.0 FC/MC/PC48D TM9X080C16MP11 21.0 TM9X080C16MP11 21.0 TM9X080C16MP11 21.0 UC48D TM9X100C16MP11 21.0 FC/MC/PC48D TM9X100C16MP11 21.0 TM9X100C16MP11 21.0 TM9X100C16MP11 21.0 UC48D L*LC*A12 14.5 FC/MC/PC37A L*LC*B12 17.5 FC/MC/PC43B L*LC*C16 21.0 FC/MC/PC43C RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TOTAL COOLING NET MBH SENS. 1109433-LTG-A-0714 SEER EER 1 790 28.8 19.4 23.50 17.75 2 1175 35.2 25.3 13.25 1 800 28.8 19.4 23.50 17.75 2 1175 35.2 25.3 13.50 1 730 28.4 18.7 2 1125 34.6 24.4 12.75 1 730 28.4 18.7 2 1125 34.6 24.4 12.75 1 775 29.2 19.5 23.50 18.00 2 1175 35.0 25.1 13.25 1 765 29.0 19.3 23.25 17.75 2 1175 35.4 25.7 13.25 1 775 30.2 20.2 24.50 18.50 2 1175 36.4 26.3 13.75 1 775 28.6 19.1 23.00 17.75 2 1175 35.4 25.1 13.25 1 775 29.2 19.5 23.50 18.00 2 1175 35.0 25.1 13.25 1 765 29.0 19.3 23.25 17.75 2 1175 35.4 25.7 13.25 1 775 30.2 20.2 24.50 18.50 2 1175 36.4 26.3 13.75 1 775 28.6 19.1 23.00 17.75 2 1175 35.4 25.1 13.25 1 730 28.4 18.7 2 1125 34.6 24.4 12.75 1 730 28.4 18.7 2 1125 34.6 24.4 12.75 1 775 29.2 19.5 23.50 18.00 2 1175 35.0 25.1 13.25 1 765 29.0 19.3 23.25 17.75 2 1175 35.4 25.7 13.25 1 775 30.2 20.2 24.50 18.50 2 1175 36.4 26.3 13.75 1 775 28.6 19.1 23.00 17.75 2 1175 35.4 25.1 13.25 1 775 29.2 19.5 23.50 18.00 2 1175 35.0 25.1 13.25 1 765 29.0 19.3 23.25 17.75 2 1175 35.4 25.7 13.25 1 775 30.2 20.2 24.50 18.50 2 1175 36.4 26.3 13.75 1 775 28.6 19.1 23.00 17.75 2 1175 35.4 25.1 13.25 1 730 28.2 18.5 21.50 2 1150 34.6 24.5 12.50 1 860 29.4 20.0 17.00 2 1275 35.2 25.7 12.50 1 770 28.8 19.2 2 1190 35.2 25.3 13.25 Johnson Controls Unitary Products 11
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B036F4C For notes, see Page 23. FURNACE WIDTH STAGE L*LC*C16 21.0 FC/MC/PC48C L*LC*C16 21.0 L*LC*C16 21.0 UC48C L*LC*C16 21.0 L*LC*C20 21.0 FC/MC/PC43C L*LC*C20 21.0 FC/MC/PC48C L*LC*C20 21.0 L*LC*C20 21.0 UC48C L*LC*C20 21.0 L*9C*B12 17.5 FC/MC/PC43B L*9C*C16 21.0 FC/MC/PC43C L*9C*C16 21.0 FC/MC/PC48C L*9C*C16 21.0 L*9C*C16 21.0 UC48C L*9C*C16 21.0 L*9C*C20 21.0 FC/MC/PC43C L*9C*C20 21.0 FC/MC/PC48C L*9C*C20 21.0 L*9C*C20 21.0 UC48C L*9C*C20 21.0 L*9C*D20 24.5 FC/MC/PC48D L*9C*D20 24.5 L*9C*D20 24.5 L*9C*D20 24.5 L*9C*D20 24.5 UC48D L*9C*D20 24.5 UC60D RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 COOLING NET MBH 1 725 28.4 18.6 17.00 2 1195 35.6 25.7 13.50 1 710 28.6 18.8 22.75 17.50 2 1185 35.4 25.1 13.50 1 810 28.8 19.4 17.50 2 1210 35.8 25.9 13.50 1 810 28.8 19.4 23.50 17.75 2 1195 35.2 25.3 13.50 1 740 28.6 18.8 2 1190 35.2 25.3 13.25 1 715 28.4 18.6 2 1150 35.2 25.1 13.50 1 800 29.2 19.6 23.00 17.75 2 1215 35.8 25.7 13.50 1 720 28.2 18.3 2 1155 35.6 25.3 13.75 1 800 28.8 19.4 23.50 17.75 2 1215 35.2 25.3 13.50 1 815 29.2 19.6 2 1200 34.8 25.1 12.75 1 815 29.2 19.6 2 1240 35.2 25.7 13.00 1 780 29.2 19.5 23.50 18.00 2 1195 35.0 25.1 13.25 1 810 29.4 19.6 22.75 17.50 2 1235 35.6 25.7 13.25 1 780 28.6 19.1 23.00 17.75 2 1195 35.4 25.1 13.25 1 810 29.0 19.4 2 1235 35.2 25.7 13.00 1 780 28.8 19.3 22.75 2 1200 35.2 25.3 13.25 1 745 28.8 18.9 2 1330 36.0 26.7 13.00 1 770 29.0 19.2 23.00 17.50 2 1330 36.2 26.7 13.25 1 755 28.4 18.7 22.00 2 1330 36.0 26.9 13.00 1 770 28.6 19.0 2 1330 35.8 26.5 13.00 1 830 29.4 19.8 23.00 17.75 2 1240 35.6 26.1 13.50 1 830 29.6 19.8 23.25 17.75 2 1225 35.8 25.9 13.50 1 835 29.4 20.0 23.00 17.75 2 1235 35.8 26.5 13.50 1 835 30.4 20.8 24.00 18.25 2 1235 36.8 27.1 13.75 1 830 29.0 19.5 17.50 2 1240 35.8 26.1 13.50 1 830 29.0 19.6 22.75 17.50 2 1225 35.4 25.7 13.25 12 Johnson Controls Unitary Products TOTAL SENS. SEER EER
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B048F4C For notes, see Page 23. FURNACE WIDTH STAGE T*(8,L)V*C16 21.0 FC/MC/PC48C T*(8,L)V*C16 21.0 FC/MC/PC48D T*(8,L)V*C16 21.0 T*(8,L)V*C16 21.0 T*(8,L)V*C16 21.0 T*(8,L)V*C16 21.0 T*(8,L)V*C16 21.0 UC48C T*(8,L)V*C16 21.0 T*(8,L)V*C20 21.0 FC/MC/PC48C T*(8,L)V*C20 21.0 FC/MC/PC48D T*(8,L)V*C20 21.0 T*(8,L)V*C20 21.0 T*(8,L)V*C20 21.0 T*(8,L)V*C20 21.0 T*(8,L)V*C20 21.0 UC48C T*(8,L)V*C20 21.0 T*9V*C16 21.0 FC/MC/PC48C T*9V*C16 21.0 FC/MC/PC48D T*9V*C16 21.0 T*9V*C16 21.0 T*9V*C16 21.0 T*9V*C16 21.0 T*9V*C16 21.0 UC48C T*9V*C16 21.0 T*9V*C20 21.0 FC/MC/PC48C RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TOTAL COOLING NET MBH SENS. 1109433-LTG-A-0714 SEER EER 1 1120 39.5 26.7 21.75 2 1565 44.5 32.2 11.25 1 1120 39.5 26.7 21.75 2 1565 44.5 32.2 11.25 1 1025 39.0 25.7 2 1600 45.0 33.0 11.50 1 1025 38.5 25.7 21.75 2 1635 45.5 34.0 11.75 1 1025 39.0 25.7 2 1600 45.0 33.0 11.50 1 1025 40.5 27.5 24.00 17.50 2 1635 46.5 35.0 12.00 1 1035 39.0 25.7 21.75 2 1615 45.0 33.0 11.50 1 1035 38.5 25.5 21.75 2 1625 45.0 32.8 11.75 1 1080 39.0 25.9 2 1640 45.0 33.0 11.50 1 1080 39.0 25.9 2 1640 45.0 33.0 11.50 1 1060 39.0 25.7 2 1625 45.5 33.0 11.75 1 1060 39.0 26.3 22.00 2 1620 45.5 33.8 12.00 1 1060 39.0 25.7 2 1625 45.5 33.0 11.75 1 1060 40.5 27.5 24.00 17.50 2 1630 47.0 35.0 12.25 1 1080 39.0 26.1 21.75 2 1640 45.5 33.2 11.50 1 1015 38.0 25.3 21.75 2 1605 45.0 32.8 12.00 1 1050 39.0 25.9 2 1590 45.0 33.0 11.50 1 1050 39.0 25.9 2 1590 45.0 33.0 11.50 1 1050 39.0 25.7 2 1590 45.0 33.0 11.50 1 1040 38.5 26.1 21.75 2 1590 45.5 33.4 11.75 1 1050 39.0 25.7 2 1590 45.0 33.0 11.50 1 1040 40.5 27.5 24.00 17.50 2 1590 46.5 34.8 12.00 1 1050 39.0 25.9 2 1590 44.5 32.0 11.50 1 1050 38.0 25.3 22.00 2 1590 44.5 31.6 11.50 1 1055 39.0 25.9 2 1655 45.0 33.0 11.50 Johnson Controls Unitary Products 13
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B048F4C For notes, see Page 23. FURNACE WIDTH STAGE T*9V*C20 21.0 FC/MC/PC48D T*9V*C20 21.0 T*9V*C20 21.0 T*9V*C20 21.0 T*9V*C20 21.0 T*9V*C20 21.0 UC48C T*9V*C20 21.0 T*9V*D20 24.5 FC/MC/PC48D T*9V*D20 24.5 T*9V*D20 24.5 T*9V*D20 24.5 T*9V*D20 24.5 UC48D T*9V*D20 24.5 UC60D TM8X080C16MP11 21.0 FC/MC/PC48C TM8X080C16MP11 21.0 FC/MC/PC48D TM8X080C16MP11 21.0 TM8X080C16MP11 21.0 TM8X080C16MP11 21.0 TM8X080C16MP11 21.0 TM8X080C16MP11 21.0 UC48C TM8X080C16MP11 21.0 UC48D TM8X080C16MP11 21.0 TM8X080C16MP11 21.0 UC60D TM8X100C16MP11 21.0 FC/MC/PC48C TM8X100C16MP11 21.0 FC/MC/PC48D RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TOTAL COOLING NET MBH SENS. SEER EER 1 1055 39.0 25.9 2 1655 45.0 33.0 11.50 1 1055 39.0 25.7 2 1655 45.0 33.0 11.50 1 1040 38.5 25.9 21.75 2 1655 45.5 33.8 11.50 1 1055 39.0 25.7 2 1655 45.0 33.0 11.50 1 1040 40.5 27.5 24.00 17.50 2 1655 46.5 34.8 11.75 1 1055 39.0 25.9 21.75 2 1655 45.5 33.2 11.50 1 1055 38.5 25.7 21.50 16.00 2 1655 45.0 33.0 11.50 1 1060 39.0 25.9 2 1645 45.0 33.0 11.50 1 1070 39.0 25.7 2 1615 45.0 33.0 11.75 1 1085 39.0 26.5 21.75 2 1630 45.5 33.8 11.75 1 1085 40.5 27.5 24.00 17.50 2 1630 46.5 34.8 12.00 1 1060 39.0 25.9 21.75 2 1645 45.5 33.2 11.50 1 1070 38.5 25.7 21.50 16.00 2 1615 45.0 32.6 11.50 1 1030 39.0 25.9 2 1525 44.5 32.0 11.50 1 1045 39.0 25.9 2 1550 45.0 33.0 11.75 1 1045 39.0 25.7 2 1550 45.5 33.0 11.75 1 1040 38.5 26.1 2 1550 45.5 33.0 11.75 1 1020 38.5 25.5 2 1525 44.5 32.0 11.50 1 1045 40.5 27.5 24.00 17.50 2 1550 46.5 34.8 12.00 1 1030 39.0 25.9 2 1525 45.0 32.0 11.50 1 1045 39.0 25.9 2 1550 45.0 32.0 11.50 1 1020 38.0 25.3 22.00 2 1525 44.5 31.8 11.50 1 1045 38.0 25.3 22.00 2 1550 44.5 31.8 11.50 1 1030 39.0 25.9 2 1525 44.5 32.0 11.50 1 1045 39.0 25.9 2 1550 45.0 33.0 11.75 14 Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B048F4C For notes, see Page 23. FURNACE WIDTH STAGE TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 UC48C TM8X100C16MP11 21.0 UC48D TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 UC60D TM8X100C20MP11 21.0 FC/MC/PC48C TM8X100C20MP11 21.0 FC/MC/PC48D TM8X100C20MP11 21.0 TM8X100C20MP11 21.0 TM8X100C20MP11 21.0 TM8X100C20MP11 21.0 UC48C TM8X100C20MP11 21.0 UC48D TM8X100C20MP11 21.0 TM8X100C20MP11 21.0 UC60D TM8X120C20MP11 21.0 FC/MC/PC48C TM8X120C20MP11 21.0 FC/MC/PC48D TM8X120C20MP11 21.0 TM8X120C20MP11 21.0 TM8X120C20MP11 21.0 TM8X120C20MP11 21.0 UC48C TM8X120C20MP11 21.0 UC48D TM8X120C20MP11 21.0 RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TOTAL COOLING NET MBH SENS. 1109433-LTG-A-0714 SEER EER 1 1045 39.0 25.7 2 1550 45.5 33.0 11.75 1 1040 38.5 26.1 2 1550 45.5 33.0 11.75 1 1020 38.5 25.5 2 1525 44.5 32.0 11.50 1 1045 40.5 27.5 24.00 17.50 2 1550 46.5 34.8 12.00 1 1030 39.0 25.9 2 1525 45.0 32.0 11.50 1 1045 39.0 25.9 2 1550 45.0 32.0 11.50 1 1020 38.0 25.3 22.00 2 1525 44.5 31.8 11.50 1 1045 38.0 25.3 22.00 2 1550 44.5 31.8 11.50 1 1090 39.0 26.5 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 16.75 2 1575 45.0 32.6 11.75 1 1105 39.5 26.5 16.75 2 1575 45.0 32.6 11.75 1 1100 39.5 26.9 16.75 2 1575 45.5 33.2 11.75 1 1085 39.0 25.7 2 1550 45.5 33.2 11.75 1 1090 39.0 26.3 16.75 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 16.75 2 1575 45.0 32.8 11.75 1 1085 38.5 26.1 22.00 2 1550 44.5 32.2 11.75 1 1105 39.0 26.3 2 1575 45.0 32.4 11.75 1 1090 39.0 26.5 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 16.75 2 1575 45.0 32.6 11.75 1 1105 39.5 26.5 16.75 2 1575 45.0 32.6 11.75 1 1100 39.5 26.9 16.75 2 1575 45.5 33.2 11.75 1 1085 39.0 25.7 2 1550 45.5 33.2 11.75 1 1090 39.0 26.3 16.75 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 16.75 2 1575 45.0 32.8 11.75 1 1085 38.5 26.1 22.00 2 1550 44.5 32.2 11.75 Johnson Controls Unitary Products 15
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B048F4C For notes, see Page 23. FURNACE WIDTH STAGE TM8X120C20MP11 21.0 UC60D TMLX080C16MP11 21.0 FC/MC/PC48C TMLX080C16MP11 21.0 FC/MC/PC48D TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 UC48C TMLX080C16MP11 21.0 UC48D TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 UC60D TMLX100C16MP11 21.0 FC/MC/PC48C TMLX100C16MP11 21.0 FC/MC/PC48D TMLX100C16MP11 21.0 TMLX100C16MP11 21.0 TMLX100C16MP11 21.0 TMLX100C16MP11 21.0 TMLX100C16MP11 21.0 UC48C TMLX100C16MP11 21.0 UC48D TMLX100C16MP11 21.0 TMLX100C16MP11 21.0 UC60D TMLX100C20MP11 21.0 FC/MC/PC48C TMLX100C20MP11 21.0 FC/MC/PC48D TMLX100C20MP11 21.0 TMLX100C20MP11 21.0 RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TOTAL COOLING NET MBH SENS. SEER EER 1 1105 39.0 26.3 2 1575 45.0 32.4 11.75 1 1030 39.0 25.9 2 1525 44.5 32.0 11.50 1 1045 39.0 25.9 2 1550 45.0 33.0 11.75 1 1045 39.0 25.7 2 1550 45.5 33.0 11.75 1 1040 38.5 26.1 2 1550 45.5 33.0 11.75 1 1020 38.5 25.5 2 1525 44.5 32.0 11.50 1 1045 40.5 27.5 24.00 17.50 2 1550 46.5 34.8 12.00 1 1030 39.0 25.9 2 1525 45.0 32.0 11.50 1 1045 39.0 25.9 2 1550 45.0 32.0 11.50 1 1020 38.0 25.3 22.00 2 1525 44.5 31.8 11.50 1 1045 38.0 25.3 22.00 2 1550 44.5 31.8 11.50 1 1030 39.0 25.9 2 1525 44.5 32.0 11.50 1 1045 39.0 25.9 2 1550 45.0 33.0 11.75 1 1045 39.0 25.7 2 1550 45.5 33.0 11.75 1 1040 38.5 26.1 2 1550 45.5 33.0 11.75 1 1020 38.5 25.5 2 1525 44.5 32.0 11.50 1 1045 40.5 27.5 24.00 17.50 2 1550 46.5 34.8 12.00 1 1030 39.0 25.9 2 1525 45.0 32.0 11.50 1 1045 39.0 25.9 2 1550 45.0 32.0 11.50 1 1020 38.0 25.3 22.00 2 1525 44.5 31.8 11.50 1 1045 38.0 25.3 22.00 2 1550 44.5 31.8 11.50 1 1090 39.0 26.5 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 16.75 2 1575 45.0 32.6 11.75 1 1105 39.5 26.5 16.75 2 1575 45.0 32.6 11.75 1 1100 39.5 26.9 16.75 2 1575 45.5 33.2 11.75 16 Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B048F4C For notes, see Page 23. FURNACE WIDTH STAGE TMLX100C20MP11 21.0 TMLX100C20MP11 21.0 UC48C TMLX100C20MP11 21.0 UC48D TMLX100C20MP11 21.0 TMLX100C20MP11 21.0 UC60D TMLX120C20MP11 21.0 FC/MC/PC48C TMLX120C20MP11 21.0 FC/MC/PC48D TMLX120C20MP11 21.0 TMLX120C20MP11 21.0 TMLX120C20MP11 21.0 TMLX120C20MP11 21.0 UC48C TMLX120C20MP11 21.0 UC48D TMLX120C20MP11 21.0 TMLX120C20MP11 21.0 UC60D TM9E100C20MP11 21.0 FC/MC/PC48C TM9E100C20MP11 21.0 FC/MC/PC48D TM9E100C20MP11 21.0 TM9E100C20MP11 21.0 TM9E100C20MP11 21.0 TM9E100C20MP11 21.0 UC48C TM9E100C20MP11 21.0 UC48D TM9E100C20MP11 21.0 UC60D TM9E120D20MP11 24.5 FC/MC/PC48D TM9E120D20MP11 24.5 TM9E120D20MP11 24.5 RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TOTAL COOLING NET MBH SENS. 1109433-LTG-A-0714 SEER EER 1 1085 39.0 25.7 2 1550 45.5 33.2 11.75 1 1090 39.0 26.3 16.75 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 16.75 2 1575 45.0 32.8 11.75 1 1085 38.5 26.1 22.00 2 1550 44.5 32.2 11.75 1 1105 39.0 26.3 2 1575 45.0 32.4 11.75 1 1090 39.0 26.5 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 16.75 2 1575 45.0 32.6 11.75 1 1105 39.5 26.5 16.75 2 1575 45.0 32.6 11.75 1 1100 39.5 26.9 16.75 2 1575 45.5 33.2 11.75 1 1085 39.0 25.7 2 1550 45.5 33.2 11.75 1 1090 39.0 26.3 16.75 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 16.75 2 1575 45.0 32.8 11.75 1 1085 38.5 26.1 22.00 2 1550 44.5 32.2 11.75 1 1105 39.0 26.3 2 1575 45.0 32.4 11.75 1 945 38.0 24.9 22.00 2 1500 44.5 31.6 11.50 1 960 38.5 24.9 2 1525 44.5 32.0 11.50 1 960 38.0 24.9 2 1525 44.5 32.0 11.50 1 985 38.0 25.3 2 1550 45.5 33.0 11.75 1 980 39.5 26.3 23.25 2 1550 46.0 33.8 12.00 1 945 38.0 24.9 22.00 2 1500 44.5 31.8 11.50 1 960 38.5 25.1 22.00 2 1525 45.0 32.0 11.50 1 960 38.0 24.7 21.75 2 1525 44.5 31.8 11.50 1 965 38.5 25.1 2 1525 44.5 32.0 11.50 1 980 38.5 25.1 2 1550 45.0 32.2 11.75 1 980 38.0 25.3 2 1550 45.5 33.0 11.75 Johnson Controls Unitary Products 17
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B048F4C For notes, see Page 23. FURNACE WIDTH STAGE TM9E120D20MP11 24.5 TM9E120D20MP11 24.5 UC48D TM9E120D20MP11 24.5 UC60D TM9X100C20MP11 21.0 FC/MC/PC48C TM9X100C20MP11 21.0 FC/MC/PC48D TM9X100C20MP11 21.0 TM9X100C20MP11 21.0 TM9X100C20MP11 21.0 TM9X100C20MP11 21.0 UC48C TM9X100C20MP11 21.0 UC48D TM9X100C20MP11 21.0 UC60D TM9X120D20MP11 24.5 FC/MC/PC48D TM9X120D20MP11 24.5 TM9X120D20MP11 24.5 TM9X120D20MP11 24.5 TM9X120D20MP11 24.5 UC48D TM9X120D20MP11 24.5 UC60D L*LC*C16 21.0 FC/MC/PC48C L*LC*C16 21.0 FC/MC/PC48D L*LC*C16 21.0 L*LC*C16 21.0 L*LC*C16 21.0 L*LC*C16 21.0 L*LC*C16 21.0 UC48C L*LC*C16 21.0 RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TOTAL COOLING NET MBH SENS. SEER EER 1 960 39.5 26.1 23.25 17.00 2 1525 46.0 33.8 12.00 1 965 38.5 25.1 2 1525 45.0 32.2 11.75 1 980 38.0 25.3 22.00 2 1550 44.5 31.8 11.75 1 945 38.0 24.9 22.00 2 1500 44.5 31.6 11.50 1 960 38.5 24.9 2 1525 44.5 32.0 11.50 1 960 38.0 24.9 2 1525 44.5 32.0 11.50 1 985 38.0 25.3 2 1550 45.5 33.0 11.75 1 980 39.5 26.3 23.25 2 1550 46.0 33.8 12.00 1 945 38.0 24.9 22.00 2 1500 44.5 31.8 11.50 1 960 38.5 25.1 22.00 2 1525 45.0 32.0 11.50 1 960 38.0 24.7 21.75 2 1525 44.5 31.8 11.50 1 965 38.5 25.1 2 1525 44.5 32.0 11.50 1 980 38.5 25.1 2 1550 45.0 32.2 11.75 1 980 38.0 25.3 2 1550 45.5 33.0 11.75 1 960 39.5 26.1 23.25 17.00 2 1525 46.0 33.8 12.00 1 965 38.5 25.1 2 1525 45.0 32.2 11.75 1 980 38.0 25.3 22.00 2 1550 44.5 31.8 11.75 1 1120 39.5 26.7 21.75 2 1565 44.5 32.2 11.25 1 1120 39.5 26.7 21.75 2 1565 44.5 32.2 11.25 1 1025 39.0 25.7 2 1600 45.0 33.0 11.50 1 1025 38.5 25.7 21.75 2 1635 45.5 34.0 11.75 1 1025 39.0 25.7 2 1600 45.0 33.0 11.50 1 1025 40.5 27.5 24.00 17.50 2 1635 46.5 35.0 12.00 1 1035 39.0 25.7 21.75 2 1615 45.0 33.0 11.50 1 1035 38.5 25.5 21.75 2 1625 45.0 32.8 11.75 18 Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B048F4C For notes, see Page 23. FURNACE WIDTH STAGE L*LC*C20 21.0 FC/MC/PC48C L*LC*C20 21.0 FC/MC/PC48D L*LC*C20 21.0 L*LC*C20 21.0 L*LC*C20 21.0 L*LC*C20 21.0 L*LC*C20 21.0 UC48C L*LC*C20 21.0 L*9C*C16 21.0 FC/MC/PC48C L*9C*C16 21.0 FC/MC/PC48D L*9C*C16 21.0 L*9C*C16 21.0 L*9C*C16 21.0 L*9C*C16 21.0 L*9C*C16 21.0 UC48C L*9C*C16 21.0 L*9C*C20 21.0 FC/MC/PC48C L*9C*C20 21.0 FC/MC/PC48D L*9C*C20 21.0 L*9C*C20 21.0 L*9C*C20 21.0 L*9C*C20 21.0 L*9C*C20 21.0 UC48C L*9C*C20 21.0 L*9C*D20 24.5 FC/MC/PC48D RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TOTAL COOLING NET MBH SENS. 1109433-LTG-A-0714 SEER EER 1 1080 39.0 25.9 2 1640 45.0 33.0 11.50 1 1080 39.0 25.9 2 1640 45.0 33.0 11.50 1 1060 39.0 25.7 2 1625 45.5 33.0 11.75 1 1060 39.0 26.3 22.00 2 1620 45.5 33.8 12.00 1 1060 39.0 25.7 2 1625 45.5 33.0 11.75 1 1060 40.5 27.5 24.00 17.50 2 1630 47.0 35.0 12.25 1 1080 39.0 26.1 21.75 2 1640 45.5 33.2 11.50 1 1015 38.0 25.3 21.75 2 1605 45.0 32.8 12.00 1 1050 39.0 25.9 2 1590 45.0 33.0 11.50 1 1050 39.0 25.9 2 1590 45.0 33.0 11.50 1 1050 39.0 25.7 2 1590 45.0 33.0 11.50 1 1040 38.5 26.1 21.75 2 1590 45.5 33.4 11.75 1 1050 39.0 25.7 2 1590 45.0 33.0 11.50 1 1040 40.5 27.5 24.00 17.50 2 1590 46.5 34.8 12.00 1 1050 39.0 25.9 2 1590 44.5 32.0 11.50 1 1050 38.0 25.3 22.00 2 1590 44.5 31.6 11.50 1 1055 39.0 25.9 2 1655 45.0 33.0 11.50 1 1055 39.0 25.9 2 1655 45.0 33.0 11.50 1 1055 39.0 25.7 2 1655 45.0 33.0 11.50 1 1040 38.5 25.9 21.75 2 1655 45.5 33.8 11.50 1 1055 39.0 25.7 2 1655 45.0 33.0 11.50 1 1040 40.5 27.5 24.00 17.50 2 1655 46.5 34.8 11.75 1 1055 39.0 25.9 21.75 2 1655 45.5 33.2 11.50 1 1055 38.5 25.7 21.50 16.00 2 1655 45.0 33.0 11.50 1 1060 39.0 25.9 2 1645 45.0 33.0 11.50 Johnson Controls Unitary Products 19
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B048F4C HL8B060F4C For notes, see Page 23. FURNACE WIDTH STAGE L*9C*D20 24.5 L*9C*D20 24.5 L*9C*D20 24.5 L*9C*D20 24.5 UC48D L*9C*D20 24.5 UC60D T*(8,L)V*C16 21.0 T*(8,L)V*C20 21.0 T*(8,L)V*C20 21.0 T*(8,L)V*C20 21.0 T*(8,L)V*C20 21.0 T*(8,L)V*C20 21.0 T*9V*C20 21.0 T*9V*C20 21.0 T*9V*C20 21.0 T*9V*C20 21.0 T*9V*C20 21.0 T*9V*D20 24.5 T*9V*D20 24.5 T*9V*D20 24.5 T*9V*D20 24.5 UC60D TM8X080C16MP11 21.0 TM8X080C16MP11 21.0 TM8X080C16MP11 21.0 TM8X080C16MP11 21.0 TM8X080C16MP11 21.0 RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TOTAL COOLING NET MBH SENS. SEER EER 1 1070 39.0 25.7 2 1615 45.0 33.0 11.75 1 1085 39.0 26.5 21.75 2 1630 45.5 33.8 11.75 1 1085 40.5 27.5 24.00 17.50 2 1630 46.5 34.8 12.00 1 1060 39.0 25.9 21.75 2 1645 45.5 33.2 11.50 1 1070 38.5 25.7 21.50 16.00 2 1615 45.0 32.6 11.50 1 1025 45.5 27.7 20.25 14.50 2 1600 55.0 36.6 11.25 1 1060 46.0 28.1 20.50 2 1600 55.0 36.8 11.50 1 1015 45.0 27.7 20.00 14.50 2 1600 55.5 37.6 11.50 1 1060 46.0 28.1 20.50 2 1600 55.0 36.8 11.50 1 1060 47.5 29.5 21.25 15.25 2 1855 58.0 41.0 11.50 1 1015 44.5 27.3 20.25 14.50 2 1605 55.0 36.8 11.50 1 1055 45.5 28.1 20.25 2 1655 55.5 37.2 11.50 1 1040 45.5 28.1 20.25 2 1655 56.0 38.0 11.50 1 1055 45.5 28.1 20.25 2 1655 55.5 37.2 11.50 1 1040 47.0 29.1 21.00 15.00 2 1655 57.0 39.0 11.50 1 1055 45.0 27.7 20.00 14.50 2 1655 55.0 37.0 11.25 1 1070 46.0 28.3 20.25 2 1615 55.0 36.8 11.25 1 1085 45.5 28.7 20.25 2 1630 55.5 38.0 11.50 1 1085 47.5 29.7 21.25 15.25 2 1630 57.0 39.0 11.75 1 1070 45.0 27.9 20.00 14.50 2 1615 55.0 36.8 11.25 1 1045 46.0 28.1 20.75 15.00 2 1550 55.0 36.2 11.25 1 1040 45.5 28.1 20.75 15.00 2 1550 55.0 37.2 11.50 1 1020 45.5 27.7 20.50 2 1525 54.5 35.8 11.25 1 1045 47.5 29.3 21.75 15.50 2 1550 56.5 38.0 11.75 1 1020 45.0 27.5 20.25 2 1525 54.0 35.8 11.25 20 Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B060F4C For notes, see Page 23. FURNACE WIDTH STAGE TM8X080C16MP11 21.0 UC60D TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 TM8X100C16MP11 21.0 UC60D TM8X100C20MP11 21.0 TM8X100C20MP11 21.0 TM8X100C20MP11 21.0 TM8X100C20MP11 21.0 TM8X100C20MP11 21.0 UC60D TM8X120C20MP11 21.0 TM8X120C20MP11 21.0 TM8X120C20MP11 21.0 TM8X120C20MP11 21.0 TM8X120C20MP11 21.0 UC60D TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 TMLX080C16MP11 21.0 UC60D TMLX100C16MP11 21.0 TMLX100C16MP11 21.0 RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TOTAL COOLING NET MBH SENS. 1109433-LTG-A-0714 SEER EER 1 1045 45.0 27.5 20.25 2 1550 54.0 35.8 11.25 1 1045 46.0 28.1 20.75 15.00 2 1550 55.0 36.2 11.25 1 1040 45.5 28.1 20.75 15.00 2 1550 55.0 37.2 11.50 1 1020 45.5 27.7 20.50 2 1525 54.5 35.8 11.25 1 1045 47.5 29.3 21.75 15.50 2 1550 56.5 38.0 11.75 1 1020 45.0 27.5 20.25 2 1525 54.0 35.8 11.25 1 1045 45.0 27.5 20.25 2 1550 54.0 35.8 11.25 1 1105 46.5 28.7 21.00 15.00 2 1575 55.0 36.6 11.50 1 1100 46.0 28.9 20.75 15.00 2 1575 55.5 37.6 11.50 1 1085 46.0 28.5 20.75 15.00 2 1550 55.0 36.4 11.50 1 1085 45.5 28.1 20.25 2 1550 54.5 36.2 11.25 1 1105 45.5 28.3 20.50 2 1575 54.5 36.4 11.50 1 1105 46.5 28.7 21.00 15.00 2 1575 55.0 36.6 11.50 1 1100 46.0 28.9 20.75 15.00 2 1575 55.5 37.6 11.50 1 1085 46.0 28.5 20.75 15.00 2 1550 55.0 36.4 11.50 1 1085 45.5 28.1 20.25 2 1550 54.5 36.2 11.25 1 1105 45.5 28.3 20.50 2 1575 54.5 36.4 11.50 1 1045 46.0 28.1 20.75 15.00 2 1550 55.0 36.2 11.25 1 1040 45.5 28.1 20.75 15.00 2 1550 55.0 37.2 11.50 1 1020 45.5 27.7 20.50 2 1525 54.5 35.8 11.25 1 1045 47.5 29.3 21.75 15.50 2 1550 56.5 38.0 11.75 1 1020 45.0 27.5 20.25 2 1525 54.0 35.8 11.25 1 1045 45.0 27.5 20.25 2 1550 54.0 35.8 11.25 1 1045 46.0 28.1 20.75 15.00 2 1550 55.0 36.2 11.25 1 1040 45.5 28.1 20.75 15.00 2 1550 55.0 37.2 11.50 Johnson Controls Unitary Products 21
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B060F4C For notes, see Page 23. FURNACE WIDTH STAGE TMLX100C16MP11 21.0 TMLX100C16MP11 21.0 TMLX100C16MP11 21.0 TMLX100C16MP11 21.0 UC60D TMLX100C20MP11 21.0 TMLX100C20MP11 21.0 TMLX100C20MP11 21.0 TMLX100C20MP11 21.0 TMLX100C20MP11 21.0 UC60D TMLX120C20MP11 21.0 TMLX120C20MP11 21.0 TMLX120C20MP11 21.0 TMLX120C20MP11 21.0 TMLX120C20MP11 21.0 UC60D TM9E100C20MP11 21.0 TM9E100C20MP11 21.0 TM9E100C20MP11 21.0 TM9E100C20MP11 21.0 UC60D TM9E120D20MP11 24.5 TM9E120D20MP11 24.5 TM9E120D20MP11 24.5 TM9E120D20MP11 24.5 UC60D TM9X100C20MP11 21.0 TM9X100C20MP11 21.0 TM9X100C20MP11 21.0 RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TOTAL COOLING NET MBH SENS. SEER EER 1 1020 45.5 27.7 20.50 2 1525 54.5 35.8 11.25 1 1045 47.5 29.3 21.75 15.50 2 1550 56.5 38.0 11.75 1 1020 45.0 27.5 20.25 2 1525 54.0 35.8 11.25 1 1045 45.0 27.5 20.25 2 1550 54.0 35.8 11.25 1 1105 46.5 28.7 21.00 15.00 2 1575 55.0 36.6 11.50 1 1100 46.0 28.9 20.75 15.00 2 1575 55.5 37.6 11.50 1 1085 46.0 28.5 20.75 15.00 2 1550 55.0 36.4 11.50 1 1085 45.5 28.1 20.25 2 1550 54.5 36.2 11.25 1 1105 45.5 28.3 20.50 2 1575 54.5 36.4 11.50 1 1105 46.5 28.7 21.00 15.00 2 1575 55.0 36.6 11.50 1 1100 46.0 28.9 20.75 15.00 2 1575 55.5 37.6 11.50 1 1085 46.0 28.5 20.75 15.00 2 1550 55.0 36.4 11.50 1 1085 45.5 28.1 20.25 2 1550 54.5 36.2 11.25 1 1105 45.5 28.3 20.50 2 1575 54.5 36.4 11.50 1 960 45.0 27.1 20.50 2 1525 54.5 35.8 11.25 1 985 45.0 27.5 20.50 2 1550 55.0 37.2 11.50 1 980 46.5 28.5 21.50 15.25 2 1550 56.5 38.0 11.75 1 960 44.0 26.7 20.00 14.50 2 1525 54.0 35.8 11.25 1 980 45.0 27.5 20.75 2 1550 55.0 36.2 11.50 1 980 45.0 27.5 20.50 2 1550 55.5 37.2 11.50 1 960 46.5 28.3 21.25 15.25 2 1525 56.5 37.8 11.75 1 980 45.0 27.5 20.25 2 1550 54.5 35.8 11.25 1 960 45.0 27.1 20.50 2 1525 54.5 35.8 11.25 1 985 45.0 27.5 20.50 2 1550 55.0 37.2 11.50 1 980 46.5 28.5 21.50 15.25 2 1550 56.5 38.0 11.75 22 Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) HL8B060F4C FURNACE WIDTH STAGE TM9X100C20MP11 21.0 UC60D TM9X120D20MP11 24.5 TM9X120D20MP11 24.5 TM9X120D20MP11 24.5 TM9X120D20MP11 24.5 UC60D L*LC*C16 21.0 L*LC*C20 21.0 L*LC*C20 21.0 L*LC*C20 21.0 L*LC*C20 21.0 L*LC*C20 21.0 L*9C*C20 21.0 L*9C*C20 21.0 L*9C*C20 21.0 L*9C*C20 21.0 L*9C*C20 21.0 L*9C*D20 24.5 L*9C*D20 24.5 L*9C*D20 24.5 L*9C*D20 24.5 UC60D 1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number. 2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. RATED CFM 18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TOTAL COOLING NET MBH SENS. 1109433-LTG-A-0714 SEER EER 1 960 44.0 26.7 20.00 14.50 2 1525 54.0 35.8 11.25 1 980 45.0 27.5 20.75 2 1550 55.0 36.2 11.50 1 980 45.0 27.5 20.50 2 1550 55.5 37.2 11.50 1 960 46.5 28.3 21.25 15.25 2 1525 56.5 37.8 11.75 1 980 45.0 27.5 20.25 2 1550 54.5 35.8 11.25 1 1025 45.5 27.7 20.25 14.50 2 1600 55.0 36.6 11.25 1 1060 46.0 28.1 20.50 2 1600 55.0 36.8 11.50 1 1015 45.0 27.7 20.00 14.50 2 1600 55.5 37.6 11.50 1 1060 46.0 28.1 20.50 2 1600 55.0 36.8 11.50 1 1060 47.5 29.5 21.25 15.25 2 1855 58.0 41.0 11.50 1 1015 44.5 27.3 20.25 14.50 2 1605 55.0 36.8 11.50 1 1055 45.5 28.1 20.25 2 1655 55.5 37.2 11.50 1 1040 45.5 28.1 20.25 2 1655 56.0 38.0 11.50 1 1055 45.5 28.1 20.25 2 1655 55.5 37.2 11.50 1 1040 47.0 29.1 21.00 15.00 2 1655 57.0 39.0 11.50 1 1055 45.0 27.7 20.00 14.50 2 1655 55.0 37.0 11.25 1 1070 46.0 28.3 20.25 2 1615 55.0 36.8 11.25 1 1085 45.5 28.7 20.25 2 1630 55.5 38.0 11.50 1 1085 47.5 29.7 21.25 15.25 2 1630 57.0 39.0 11.75 1 1070 45.0 27.9 20.00 14.50 2 1615 55.0 36.8 11.25 Johnson Controls Unitary Products 23
HEATING CAPACITY - With Air Handler AIR HANDLER STAGE RATED CFM HEATING 2 NET MBH 47 F OD 17 F OD HSPF COP @ 47 F 18 SEER HP WITH AIR HANDLERS 1 470 18.3 3.14 AHV24B 2 710 23.4 16.9 9.40 3.52 2* 470 24.2 15.1 8.70 2.86 1 500 18.8 3.20 AHV30B 2 775 23.8 17.0 9.45 3.62 2* 500 24.6 15.2 8.70 2.94 1 485 18.9 3.24 AHV36C 2 760 23.8 16.9 9.65 3.74 HL8B024F4C 2* 485 25.2 15.1 8.85 2.98 1 620 19.2 3.48 MV12B FC/MC43B 2 800 24.0 16.9 9.60 3.78 2* 620 25.4 15.2 9.35 3.28 1 595 19.0 3.50 MV12D FC/MC48D 2 905 24.0 16.8 9.80 4.00 2* 595 25.0 15.0 9.60 3.30 1 645 19.2 3.62 MV12D FC/MC60D 2 835 23.8 16.6 9.90 3.92 2* 645 25.4 14.9 9.80 3.42 1 685 25.5 3.28 AHE42D 2 1180 35.6 24.4 9.95 4.08 2* 685 35.4 23.8 9.95 2.92 1 785 25.3 3.46 AHV36C 2 1215 36.0 24.8 9.65 3.98 2* 785 35.8 23.6 8.90 3.10 1 790 25.7 3.52 AHV42D 2 1180 35.8 24.4 9.90 4.06 2* 790 34.4 23.6 9.75 3.22 1 835 25.9 3.60 AHV48D 2 1155 35.4 24.2 9.95 4.04 2* 835 35.6 23.2 9.30 3.24 1 805 25.9 3.46 MV12B FC/MC43B 2 1225 36.0 24.8 9.70 4.00 2* 805 36.0 23.8 8.95 3.10 1 785 25.7 3.50 MV12D FC/MC48D 2 1160 35.6 24.4 10.05 4.08 HL8B036F4C 2* 785 35.8 23.6 9.20 3.14 1 735 25.7 3.40 MV12D FC/MC60D 2 1135 35.6 24.2 9.75 3.96 2* 735 35.6 23.4 8.90 2.98 1 770 25.5 3.50 MV12D 2 1235 36.0 24.0 10.00 4.20 2* 770 35.0 23.0 9.80 3.24 1 780 26.3 3.68 MV12D 2 1155 36.0 24.2 10.20 4.28 2* 780 36.4 23.4 9.35 3.32 1 775 25.3 3.38 MV16C FC/MC43C 2 1200 35.8 24.6 9.80 4.02 2* 775 35.4 23.8 9.40 3.08 1 775 25.7 3.44 MV16C FC/MC48C 2 1200 35.6 24.6 9.85 4.02 2* 775 36.0 23.6 9.70 3.12 1 860 26.3 3.60 MV20D FC/MC48D 2 1300 36.0 24.8 9.95 4.20 2* 860 36.4 24.0 9.20 3.28 For notes, see Page 26. 24 Johnson Controls Unitary Products