Connector series UIC 558 VE R115 4 52 F 0.en
UIC 558 VE series connector The connector complies with the requirements of UIC 558 VE (up to 1994: UIC 58 VE). It connects lines used for the: remote control of lights remote control of doors public address systems in passenger coaches and multiple units transmission of binary data We can also supply contact inserts for special applications. Rugged design T he receptacle features an emergency release that ensures, provided the receptacle is installed in the correct position, a non-destructive separation of plug and receptacle when two electrically not decoupled vehicles move apart. Material I ncreased corrosion resistance to chemicals, in particular to detergents containing acids or alkalis Shell Quick and easy to install Shell can be split, allowing wiring checks Simple to replace individual elements Seals can be replaced without disassembling the contacts Uses the same basic design for normal receptacles and dummy receptacles. The conversion of dummy r eceptacles into normal receptacles is done by fitting the appro priate contacts. Coding Keypositions for mating prevent connectors from mismating with connectors carrying different inserts 1 pole plug intermateable with 18 pole receptacle in accordance with UIC 558 VE W e supply on request receptacles and plugs assembled complete with cables or wires to suit the customer s specific requirements
Specifications UIC 558 VE series Series UIC E-1P, UIC E-1S UIC E-18P, UIC E-18S UIC E-22P+PE, UIC E-22S+PE Standard UIC 558 VE UIC 558 VE --- Max. number of contacts (prefer types*) (PE = protective earth contact) 1 pole 18 pole 22 pole + PE Contact arrangement Contact identification marked on insert: Pin insert: rear view Socket insert: front view Rated operating voltage without PE (IEC 008) Rated operating voltage with PE (IEC 008) 25 V 25 V 25 V 115 V~ 115 V~ 115 V~ Rated current 10 A 10 A 10 A Contact diameter mm mm mm Terminal type Wire gauges Crimp 0.75... 1.00 mm² (AWG 18... ) Crimp 0.75... 1.00 mm² (AWG 18... ) Crimp 0.75... 1.00 mm² (AWG 18... ) Contact resistance (IEC 05-2) 2 m 2 m 2 m Temperature range 0 C... +90 C 0 C... +90 C 0 C... +90 C Protection degree (EN 0529) IP54 IP54 IP54 Test standards (IEC 008-1) t min [ C] / t max [ C] / t testing time [days] -0 /90 /21-0 /90 /21-0 /90 /21 Mechanical life (IEC 05-5, Test 9a) 10,000 operating cycles 10,000 operating cycles 10,000 operating cycles Materials Shell, receptacle Aluminium die-cast GdAISi GdAISi GdAISi Shell, plug P olyamide with 0% fibre glass PA GF0 PA GF0 PA GF0 Contact inserts Polyamide. = halogen-free reinforced with 0% fibre glass PA. GF0 PA. GF0 PA. GF0 Seals Neoprene Neoprene Neoprene Contacts Wrought copper alloy, crimpable Wrought copper alloy, crimpable Wrought copper alloy, crimpable Contact plating Ni Ni Ni * We supply on request special contact arrangements, e. g. + 2 and 1 + 2HF (not standardized to UIC), as well as others to customer requirements.
UIC BD xx, UIC KD xx, UIC LD xx Receptacle Shell 52 28 R115 4 5. 4 8 5 Mounting, Ordering, Mounting position Mounting holes l Mounting, Schaltbau standard Ø.5 or M * * 9. Ø 5 l Mounting, Kheops compatible * 50 Ø.2 Ø 5 45 * 50 * 5 Diameter of fixing and mounting elements, e.g. bolt heads,.5 mm max. Dummy receptacle Description Shell with socket insert, but without contacts, for receiving the free plug cable at train end UIC BD 10 C0 Receptacle with insert for 1 socket contacts, colour RAL 705 UIC BD 180 CR UIC BD 220 C0 PE Coupling receptacle Receptacle with insert for 18 socket contacts, colour RAL 705, marking Receptacle with insert for 22+PE socket contacts, colour RAL 7 05 Complete receptacle consisting of shell, socket insert and all the contacts UIC KD 1S C0 Receptacle with insert + 1 socket contacts, colour RAL 705 UIC KD 18S CR UIC KD 18S DR UIC KD 22S C0 PE Empty receptacle UIC LD 10 C0 UIC LD 180 CR UIC LD 180 DR Correct mounting position Receptacle with insert + 18 socket contacts, colour RAL 705, marking Receptacle with insert + 18 socket contacts, colour RAL 020, marking Receptacle with insert + 22+PE socket contacts, colour RAL 7 05 Shell without insert and without socket contacts Receptacle without insert for 1/22+PE socket contacts, colour RAL 7 05 Receptacle without insert for 18 socket contacts, colour RAL 7 05, marking Receptacle without insert for 18 socket contacts, colour RAL 020, marking The recptacle features an emergency release that ensures a non-destructive separation of plug and receptacle. To this end the receptacle must be mounted upright onto the front end of the vehicle or carriage, so that the lid opens upwards.
UIC ST xx Plug Shell *) *) *) Colour markings in 18 pole version aprox.155 115 111 UIC ST 1P E0 D1 Description Plug with insert, 1 pins, and cable gland PG21 with antikink fitting for cable diameter.5 15.5 mm UIC ST 1P E0 D2 Plug with insert, 1 pins, and cable gland PG21 with antikink fitting for cable diameter 1.5 18.5 mm Ø 49.8 D1 or D2 UIC ST 18P ER D2 UIC ST 22P E0 D1 PE Plug with insert, 18 pins, and cable gland PG21 with antikink fitting for cable diameter 1.5 18.5 mm Plug with insert, 22+PE pins, and cable gland PG21 with antikink fitting for cable diameter.5 15.5 mm UIC ST 22P E0 D2 PE Plug with insert, 22+PE pins, and cable gland PG21 with antikink fitting for cable diameter 1.5 18.5 mm Ø UIC KK D1, UIC KK D2 Cable gland Accessories Mounting wall Ø 0 (Mounting hole) Pg 21 D1 or D2 UIC KK D1 UIC KK D2 Description Cable gland PG21 with antikink fitting for cable diameter.5 15.5 mm Cable gland PG21 with antikink fitting for cable diameter 1.5 18.5 mm 0... 8 24 9.5+1
UIC E-1P, UIC E-1S Contact insert in acc. with UIC 558 VE Contact inserts UIC E-1P pin insert 1 1: Pin, type SHC-1,00-Ni-0 UIC E-1S socket insert 1 1: Socket, type BHC-1,00-Ni-0 8 1 9 18 14 7 11 10 5 1 1 4 2 15 +0.15-0.50 Ø 52.8 1 8 14 9 18 11 7 10 1 1 5 2 15 4 22.2 +0.2 21.5 ±0.2 Ø 45. -0.2 22 ±0.2 1. -0.25 Ø 41.5 ± 0.15 Ø 59.9-0.50 Sealed contact cavities Sealed contact cavities UIC E-18P, UIC E-18S Contact insert in acc. with UIC 558 VE Contact inserts UIC E-18P pin insert 1 18: Pin, type SHC-1,00-Ni-0 UIC E-18S socket insert 1 18: Socket, type BHC-1,00-Ni-0 8 1 9 18 14 7 11 10 5 1 1 4 2 15 +0.15-0.50 Ø 52.8 1 8 14 9 18 11 7 10 1 1 5 2 15 4 22.2 +0.2 21.5±0.2 Ø 45. -0.2 22 ±0.2 1. -0.25 Ø 41.5 ±0.15 Ø 59.9-0.50
7 UIC E-22P+PE, UIC E-22S+PE Contact insert not in acc. with UIC 558 VE Contact inserts UIC E-22P+PE pin insert 1 22: Pin, type SHC-1,00-Ni-0 Pin, type SHC-1,00-Ni/U UIC E-22S+PE socket insert 1 22: Socket, type BHC-1,00-Ni-0 PE: Socket, type BHC-1,00-Ni-0 18 21 20 21 20 19 8 10 10 8 22 22 19 9 9 1 2 5 4 1 15 14 11 1 Ø 52.8-0.5 11 1 14 2 1 4 5 15 7 1 18 Ø 41.8 Ø 41.4 ±0.2 22.2 +0.2 21.5 ±0.2 Ø 45. -0.2 22 ±0.2 1. -0.25 Ø 59.9-0.2 SHC-1,00-xx-0, BHC-1,00-xx-0 Contacts (pin / socket) Contacts : Example: SHC-1,00-Ni-0 Type of contact S B Contact diameter H Connection C Pin Socket Ø mm Crimp Wire gauge 1,00 Leads, A 18... WG (0.75... 1.00 mm²) Nickel ( S pecial design UIC v ersion 0 C standard) Gold Silver ontact finish Ni Au Ag Pin contact Wire gauge Socket contact Wire gauge 5.5 Ø 5.15.8 Ø 5.15 Pin contact Socket contact Specification SHC-1.00-Ni-0 SHC-1.00-Au-0 SHC-1.00-Ag-0 Contact finish Nickel Gold Silver BHC-1.00-Ni-0 BHC-1.00-Au-0 BHC-1.00-Ag-0 Contact finish Nickel Gold Silver Wire gauge AWG 1 8... (0.75 mm²) 1.00 AWG 1 8... (0.75 mm²) 1.00 AWG 1 8... (0.75 mm²) 1.00 Rated current 10 A 10 A 10 A
CWZ-00 Crimp tool AWZ-B Extraction tool Tool Disassembly of contacts: Insert extraction tool into the contact hole as far as it will go. The contact (pin or socket) is ejected from the contact cavity by the force of the spring. Important: Never use force to remove the contacts from the contact cavity! Assembly l Assembly of receptacle Empty receptacle Socket insert Cover O-ring seal Socket Drawing of 1 / 18 pole receptacle l Assembly of plug Ring Pin insert O-ring seal Plug shell Sealing ring Strain relief fitting Pin Compression ring Clamping screw Contacts must be heard to engage in the contact insert. When assembling or disassembling the strain relief fitting, the clamping screw must be fully removed from the fitting.
UIC DK 1S 00 Lxxxx Connector cable, single ended, 1 pole wihte withe wihte 100 ±5 screen 11 11 x 11 = (1) 5 L 180 Number of contacts L UIC DK 1S 00 Lxxxx 1 xxxx mm Adapter cable with cable harness and socket insert for installation in empty receptacle; we supply assembled cable sets with the length you require. UIC DL 18S 00 Lxxxx Connector cable, single ended, 18 pole L Number of contacts L UIC DL 18S 00 Lxxxx 18 xxxx mm UIC DL 18S 00 L2000 * 18 2000 mm UIC DL 18S 00 L2800 * 18 2800 mm Adapter cable with cable harness and socket insert for installation in empty receptacle; we supply assembled cable sets with the length you require. UIC DL 18S 00 L5000 * 18 5000 mm * Prefer length
UIC SK 1P E0 Lxxxx Connector cable, single ended, 1 pole approx. 155 approx. 40 white white white screen 100±5 11 L 11 x 11 = (1) 180 5 Number of contacts L UIC SK 1P E0 Lxxxx 1 xxxx mm Adapter cable with cable harness and plug (plug without marking); we supply assembled cable sets with the length you require. UIC SK 1P E0 L450 * 1 450 mm * Prefer length UIC SL 18P ER Lxxxx Connector cable, single ended, 18 pole 115 approx. 40 L Number of contacts L UIC SL 18P ER Lxxxx 18 xxxx mm UIC SL 18P ER L2400 * 18 2400 mm UIC SL 18P ER L2800 * 18 2800 mm Adapter cable with cable harness and plug (plug with marking); we supply assembled cable sets with the length you require. UIC SL 18P ER L500 * 18 500 mm * Prefer length
UIC VK 1P E0 Lxxxx Connector cable, double ended, 1 pole approx. 155 approx. 40 L2 L1 Bestellbezeichnung Polzahl L2 L1 UIC VK 1P E0 Lxxxx 1 xxxx mm L2 + 20 mm Connecting cable with cable and plugs (plugs without marking); we supply ssembled cable sets with the length you require. UIC VK 1P E0 L280 * 1 2880 mm 2910 mm * Prefer length UIC VK 18P ER Lxxxx Connector cable, double ended, 18 pole approx. 155 approx. 40 L2 L1 Bestellbezeichnung Polzahl L2 L1 UIC VK 18P ER Lxxxx 18 xxxx mm L2 + 20 mm UIC VK 18P ER L00 18 00 mm 190 mm UIC VK 18P ER L2400 18 2400 mm 20 mm Connecting cable with cable and plugs (plugs without marking); we supply assembled cable sets with the length you require. * Prefer length