DISPLYS, DT LOGGERS ND SOFTWRE In times where energy conservation is a top priority for all progressive enterprises, the measurement of flow rates and consumption is becoming more and more important. However, measurement is just one step forward. In order having a complete picture of the gas and compressed air consumption in a factory a permanent monitoring, an graphical/statistical analyzes and a convenient reporting is required. HU CSM-2G Server TCP/IP from several remote units / gateway US/ converter from several remote units -41-
The universal display and data logger that can measure, display and record all relevant parameters (Flow, consumption, dew point, pressure, temperature, power consumption, compressor status etc.) in a compressed air system. Features High resolution 5 colour touch screen interface ll CS-iTEC s are connectable as well as third party types Up to 16 inputs 2 wall casings available: 4 cable glands 7 cable glands US interface for data transfer to data stick or PC (,CS-iTEC-us) and (Modbus/TCP, CS-iTEC-us) interface to factory automation system 10 W power supply (24 VDC) Data logger option: 100 million values larm monitoring with 2 relay outputs Integrated web server for remote monitoring Various options for system extension The S 330/331 from CS-iTEC is a very powerful yet cost effective new data logger and display solution. The high resolution 5 graphic display allows an easy operation where details are much sharper shown compared to many of the smaller low resolution displays. The US port works as a slave in combination with a PC, but also as a master when recorded data has to be transferred to a US stick. It s versatility in regards of inputs makes it a perfect solution for most measurement tasks. System overview 2 digital inputs: SDI Sensors (up to 2 SDI s) Modbus Sensors (up to 16 Modbus s) 2 larm relay outputs 2 analog inputs (option): 0... 20 m, 4... 20 m 0... 10 V Pulse,, US port Remark: CS-iTEC s are equipped with SDI and / or Modbus interface S 330/331 is available as panel version or with 2 different size wall mountable casings Hat rail option ack view with connection terminals -42-
Touch screen operation Up to 4 s can be viewed on one page and through page scrolling further s can be displayed. S 330/331 comes with a high resolution 5 colour touch screen interface making the operation as simple as possible. CS-iTEC intelligent s are detected automatically on power-up. With a few settings the data logger is ready for operations with virtually unlimited memory size. On-site graphic analyzes where channels can be selected as required help to identify certain problems immediately. For a detailed analyzes we recommend using our software CSM-S and / or CSM-2G. Technical data S 330/331 Casing Size: 120 x 173 x 67 mm Power supply : 100 240 VC, 15 W : 18 30 VDC, 15 W Interface US larm output Sensor inputs 2 relay, 230 VC, 3 2 x SDI inputs or 1 x SDI and 1 x Modbus input (Modbus input for up to 16 s) 2 x analog (option) Data logger 100 million values (option) ccuracy SDI, Modbus: see specs nalog: 0...20 m: 0.01 m 0...10 V: 0.01 V Pulse: ±1 digit Display size: 5 Resolution: 800 x 480 Operating temperature 0 ºC... +50 ºC Storage temperature -20 ºC... +70 ºC Protection: IP 65-43-
Sensors connectable to S 330/331 Inputs for CS-iTEC flow / dew point s (2 channels) Flow / Consumption s S 400 S 420 Dew point s Inputs for analog s (2 channels) CS-iTEC analog s S 450 S 452 S 430 S 220 S 201 S 212 / S 215 Remark: S 330/331 can power maximum 1 S 450/452. If more than one S 450/452 is connected a separate power supply has to be added. (see accessories for S 330/331) Please refer to the detailed data sheet for further information and options. Third party s Following third party s are connectable to S 330/331: Flow / consumption with m signal and / or pulse output 0...20m, 4... m, 0...1V, 0...10V signals Temperature s: Pt100, Pt1000: 3-wire, 4-wire Pressure Temperature with 4...20 m Temperature Pt100 Current clamp MiniFlex Modbus-Master input for s S 330/331 include digital inputs for CS-iTEC s or s. In order to connect the s properly on a bus system it s recommended to daisy-chain the s to one of the inputs. For this purpose we offer a splitter to simplify the connection. Through this method you can add up to 16 s to the master input. S 330 Modbus master input 1 2 16 splitter splitter splitter -44-
Order form Order No. Option 1 Power supply Casing Description 0500 0333 0500 0331 1662 1663 1664 1665 1666 1667 1668 1669 0554 3310 0554 0007 0554 0006 0554 3311 0554 3312 0554 3313 Further accessories C D E F S 330, panel version, 2 digital inputs,,, US S 331, panel version, 2 digital inputs,,, US, data logger None 2 analogue inputs 0...20 m + 2 pulse inputs Power supply 100 240 VC, 20 V, 2 relay outputs Power supply 18 30 VDC, 20 W, 2 relay outputs None Wall mountable casing with 4 cable glands Wall mountable casing with 7 cable glands Wall mountable casing with 3 cable glands + Wall mountable casing with 6 cable glands + Hat rail holder M12 (Modbus) splitter Power supply wall mountable Power supply for hat rail Line filter for EMC protection SDI / converter Order No. Description Cables 0554 0015 US cable for S 330/331 0553 0104 Sensor cable 5 m, with M12 conenctor, open wires 0553 0105 Sensor cable 10 m, with M12 conenctor, open wires 0553 0106 Power cable with mains plug, 1.8 m 0553 0120 cable 5 m, RJ45 plug at both ends 0553 0123 cable, 3 pole, WG 24 (per meter) Converters and gateways 0554 0010 / gateway 0554 0012 / Profibus gateway 0554 0013 / Modbus/TCP gateway 0554 0011 repeater 0054 0331 / US converter Please contact our customer service for further converter/gateway options Software 0599 7010 CSM-S data analyzes software for S 330/331. Supports US,,. Can communicate with 1 S 330/331 at a time 0599 2030 CSM-2G. data acquisition and analyzes software, supports Modbus/TCP, and CS-iTEC-us device protocols, Server version,windows based, client software hardware independent, 20 measuring channels 0599 2033 CSM-2G. data acquisition and analyzes software, supports Modbus/TCP, and CS-iTEC-us device protocols, Server version,windows based, client software hardware independent, unlimited measuring channels 1101 Consumption report generator for CSM-2G Others 0554 0007 0554 0006 0554 0030 0554 0031 0554 0032 Connection board for looping 4-20 m and pulse signals to PLC, mountable in wall casing 1666 + 1668 Power supply wall mountable, input: 85...264 VC, output: 24 VDC, 15W, without cable Power supply for hat rail Power meter S 110, hat rail mountable, Current meter, 0-20 m, 8 channels, Pulse meter, 7 channels, -45-