.AV Framewrk Sftware fr DMPS3 Operatins Guide Crestrn Electrnics, Inc.
Crestrn prduct develpment sftware is licensed t Crestrn dealers and Crestrn Service Prviders (CSPs) under a limited nn-exclusive, nn-transferable Sftware Develpment Tls License Agreement. Crestrn prduct perating system sftware is licensed t Crestrn dealers, CSPs, and end-users under a separate End-User License Agreement. Bth f these Agreements can be fund n the Crestrn website at www.crestrn.cm/legal/sftware-license-agreement. The prduct warranty can be fund at www.crestrn.cm/legal/sales-terms-cnditins-warranties. The specific patents that cver Crestrn prducts are listed at www.crestrn.cm/legal/patents. Certain Crestrn prducts cntain pen surce sftware. Fr specific infrmatin, visit www.crestrn.cm/legal/pen-surce-sftware. Crestrn, the Crestrn lg,.av Framewrk, AirMedia, Cresnet, Crestrn Cnnect It, Crestrn Cnnected, Crestrn Fusin, Crestrn Tlbx, D3 Pr, DigitalMedia, DM, RmView, and SystemBuilder are either trademarks r registered trademarks f Crestrn Electrnics, Inc. in the United States and/r ther cuntries. Macintsh and Safari are either trademarks r registered trademarks f Apple, Inc. in the United States and/r ther cuntries. Blu-ray, Blu-ray Disc, and the Blu-ray lg are either trademarks r registered trademarks f the Blu-ray Disc Assciatin (BDA) in the United States and/r ther cuntries. Chrme is either a trademark r a registered trademark f Ggle, Inc. in the United States and/r ther cuntries. HDMI is either a trademark r a registered trademark f HDMI Licensing LLC in the United States and/r ther cuntries. Internet Explrer, Micrsft Edge, and Windws are either trademarks r registered trademarks f Micrsft Crpratin in the United States and/r ther cuntries. Firefx is either a trademark r a registered trademark f the Mzilla Fundatin in the United States and/r ther cuntries. MultiSync and NEC are either trademarks r registered trademarks f NEC Display Slutins, Ltd, in the United States and/r ther cuntries. Panasnic is either a trademark r a registered trademark f Panasnic Crpratin in the United States and/r ther cuntries. Samsung is either a trademark r a registered trademark f Samsung Electrnics C., Ltd, in the United States and/r ther cuntries. Sharp is either a trademark r a registered trademark f Sharp Crpratin in the United States and/r ther cuntries. Sny is either a trademark r a registered trademark f Sny Crpratin in the United States and/r ther cuntries. Wi-Fi is either a trademark r a registered trademark f Wi-Fi Alliance in the United States and/r ther cuntries. Other trademarks, registered trademarks, and trade names may be used in this dcument t refer t either the entities claiming the marks and names r their prducts. Crestrn disclaims any prprietary interest in the marks and names f thers. Crestrn is nt respnsible fr errrs in typgraphy r phtgraphy. This dcument was written by the Technical Publicatins department at Crestrn. 2018 Crestrn Electrnics, Inc.
Cntents Intrductin 1 Cnfiguratin 2 Access the Cnfiguratin Utility... 3 Navigate the Cnfiguratin Utility... 5 Status Menu... 5 AV Framewrk Dashbard... 6 AVF Lg... 8 Cnfigure Menu... 9 System Setup... 10 Device Management... 19 Inputs/Outputs... 24 Manage Cnfiguratin... 27 Users Menu... 29 Operatin 30 Display Overview... 30 Hme Screen Overview... 31 Hme Screen (N Scheduling Calendar Cnnected)... 31 Hme Screen (Rm Available)... 32 Hme Screen (Rm Reserved)... 33 Reserving a Meeting frm the Hme Screen... 34 Accessing the System Inf Screen... 35 Present a Surce Screen Overview... 36 Present a Surce Screen - Single Display... 36 Present a Surce Screen - Dual Display... 37 Present a Surce Screen - Mre than Tw Displays... 38 Nw Presenting Screen - HDMI Surce... 39 Cnnect t AirMedia Screen... 40 Nw Presenting Screen - AirMedia Surce... 41 Nw Presenting Screen - Other Surce Devices... 41 System Ntificatins... 42 Appendix A: Interface Setup 43 TSW-752/TSW-1052/TSW-760/TSW-1060... 43 XPanel... 45 AM-100/AM-101... 46 TT-100/TT2-100... 47 MP-B10/MP-B20... 48 GLS-ODT-C-CN/GLS-OIR-C-CN... 51 Crestrn Fusin... 51 Operatins Guide DOC. 7887G Cntents i
Cnnecting t Crestrn Fusin... 51 Cntrlling and Mnitring with Crestrn Fusin... 55 Appendix B: Add New Device Additinal Fields 58 AirMedia... 58 Blu-ray Player... 58 Buttn Panel... 58 Cable Caddy... 59 Cable TV... 59 Crestrn IO... 60 Digital Graphics Engine... 60 DigitalMedia Receiver... 60 DigitalMedia Scaling Receiver... 61 DigitalMedia Transmitter... 63 Flat Panel Display... 64 Occupancy Sensr... 65 Prjectr... 66 Rm Availability Hallway Sign... 66 Tuch Screen... 67 Vide Server... 67 Appendix C: Advanced Ruting Behavir and Use Cases 68 Interactive Classrm (Fixed Ruting)... 68 Twn Hall Meeting Space (Fllws Ruting)... 69 Appendix D: Deleting the.av Framewrk Prgram 70 ii Cntents Operatins Guide DOC. 7887G
.AV Framewrk Sftware fr DMPS3 Intrductin The Crestrn DMPS3 Series f DigitalMedia presentatin systems cme with the built-in.av Framewrk prgram, which enables cmplete system cnfiguratin and cntrl. The latest versin f the prgram and all prjects are available n the DMPS3 series prduct web pages at www.crestrn.cm, as well as in the firmware upgrade.zip file. The zipped package file includes the fllwing: The.AV Framewrk prgram The tuch screen.av Framewrk prject The DM-DGE-200-C.AV Framewrk prject In additin t perating with a TSW-752, TSW-1052, TSW-760, r TSW-1060 tuch screen, a DM-DGE-200-C digital graphics engine, an MP-B10 r MP-B20 media presentatin buttn panel, r XPanel,.AV Framewrk ffers direct integratin with Crestrn Cnnect It cable caddies, such as the TT-100 and TT2-100 presentatin interfaces, and with the AirMedia presentatin gateway. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 1
Cnfiguratin Settings fr.av Framewrk may be cnfigured using the included web-based cnfiguratin utility. The cnfiguratin utility is accessible frm a web brwser if the IP address r hstname f the DMPS3 device is knwn. Use the cnfiguratin utility t cnfigure system settings, t add devices t the.av Framewrk, t cnfigure the inputs and utputs f the DMPS3 device, and t manage saved cnfiguratins. The cnfiguratin utility als prvides screens that display the status f the system and an activity lg, as well as screens fr adding and managing users. Prir t accessing the cnfiguratin utility, ensure that all hardware in the.av Framewrk system has been updated t the latest firmware versins. Additinally, lad the files that are included in the zipped package file as fllws: NOTE: The prgram and prject files must be used as a versin-matched set and may nt be edited r custmized. Lad the.av Framewrk prgram file (AVFPlugin.cpz) t Prgram 01 n the DMPS3 device. Lad the tuch screen.av Framewrk prject file (AVF_TSW.vtz) t the supprted tuch screen as a custm prject. Lad the DM-DGE-200-C.AV Framewrk prject file (AVF_DGE.vtz) t the DM-DGE-200-C as a custm prject. NOTE: Use Crestrn Tlbx sftware t access firmware updates and t mdify the Ethernet settings and the IP table f the DMPS3 device. Fr mre infrmatin, refer t the embedded Crestrn Tlbx help file. NOTE: If the firmware detects an lder versin f the.av Framewrk prgram in the Prgram 01 slt when the update is applied, it will update the prgram autmatically (fr.av Framewrk versins 4.x and abve nly). If n prgram is detected, r if a user prgram is detected, the prgram update is nt applied. 2.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Access the Cnfiguratin Utility T access the cnfiguratin utility frm a web brwser, perfrm the fllwing prcedure: 1. Open a supprted web brwser. Supprted web brwsers include the Firefx brwser, the Internet Explrer brwser, the Micrsft Edge brwser, the Safari brwser, and the Chrme brwser. 2. Enter the IP address r the hstname f the DMPS3 device in the brwser URL field, appending ":8008" t the IP address r hstname (e.g., "xxx.xxx.xxx.xxx:8008"). The.AV Framewrk lgin screen displays..av Framewrk Lgin Page 3. Enter the default username and passwrd ("admin") in the Username and Passwrd text fields. 4. Click Sign In. If the lgin is successful, the AV Framewrk Dashbard page (the utility's default page) displays. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 3
AV Framewrk Dashbard Page 4.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Navigate the Cnfiguratin Utility Use the drp-dwn menus n the tp left f the screen t navigate the cnfiguratin utility. The menus are always visible n the tp left f any f the cnfiguratin pages and prvide the fllwing selectins. Status Dashbard AVF Lg Cnfigure Users System Device Management DMPS Cnfiguratin Cnfiguratin Management Manage Drp-dwn Menus The AV Framewrk Dashbard page is the default page that displays upn lgging in, as shwn in the image n the preceding page. Click Sign Out n the tp right f any page t sign ut f the cnfiguratin utility. Status Menu The Status menu prvides selectins fr viewing the status f the netwrk, the DMPS3 device, and cnnected devices. The Status menu als prvides access t the activity lg. These menu selectins are described in the sectins that fllw. Navigatinal cntrls are als prvided n the bttm f each status page: Select Dashbard t display the AV Framewrk Dashbard page. Select AVF Lg t display the AVF Lg page. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 5
AV Framewrk Dashbard Navigate t Status > Dashbard t display the AV Framewrk Dashbard page. The AV Framewrk Dashbard page displays the fllwing infrmatin. Ethernet Infrmatin AV Framewrk Dashbard - Ethernet Infrmatin The Ethernet Infrmatin sectin displays the hst name, the IP address, the subnet mask address, and the default ruter address f the DMPS3 device. Fr mre infrmatin n cnfiguring Ethernet settings, refer t page 10. DMPS Infrmatin AV Framewrk Dashbard - DMPS Infrmatin The DMPS Infrmatin sectin displays the name and the mdel f the DMPS3 device, as well as the channel number, icn, name, cnnectin type, and status (Online, Offline, r N/A) f the DMPS3 device input and utput channels. Fr mre infrmatin n cnfiguring input and utput channels f the DMPS3 device, refer t page 24. 6.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
The status fr input and utput channels indicates the fllwing infrmatin: Online Offline Input: The surce is sending cntent. Output: The sync is receiving cntent. Input: The surce is nt sending cntent r is nt present. Output: The sync is nt receiving cntent r is nt present. N/A: The device status is nt reprted (shwn fr CEC-cntrlled displays, nn-cntrlled displays, IR-cntrlled devices, and fr devices cnnected t the DMPS3 device thrugh the AUX1, AUX2, and SPEAKER prts). Equipment AV Framewrk Dashbard - Equipment The Equipment sectin displays the name, mdel, and status (Online, Offline, r N/A) f any equipment cnnected t.av Framewrk, including the DMPS3 device. Fr mre infrmatin n cnnecting equipment t.av Framewrk, refer t page 19. NOTE: Tw tuch screen devices (TSW-760 and Webx) are added by default t new.av Framewrk cnfiguratins. These devices may be edited r deleted depending n the system cnfiguratin. NOTE: The Webx tuch screen device is used t display and test the tuch screen prject thrugh the.av Framewrk prgram's built-in web XPanel. Fr mre infrmatin, refer t "XPanel" n page 45. NOTE: Additinal devices are added by default t new.av Framewrk cnfiguratins fr certain DMPS3 devices. The status fr cnnected equipment indicates the fllwing infrmatin: Online: The device is detected and is prviding feedback t.av Framewrk. Offline: The device was nce detected, but it is n lnger detected by.av Framewrk. N/A: The device status is nt reprted (shwn fr CEC-cntrlled displays, nn-cntrlled displays, IR-cntrlled devices, and fr devices cnnected t the DMPS3 device thrugh the AUX1, AUX2, and SPEAKER prts). Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 7
AVF Lg Navigate t Status > AVF Lg t display the AVF Lg page. AVF Lg Page Use the AVF Lg page t display the event lg fr.av Framewrk. Event lgs are recrded at a set interval and may be viewed and dwnladed frm this page. Select Stp Scrlling t prevent the activity lg frm autmatically scrlling. Select Scrlling t resume scrlling if Stp Scrlling is selected. Select Dwnlad t dwnlad the activity lg t the hst cmputer as a text file. 8.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Cnfigure Menu The Cnfigure menu prvides selectins fr cnfiguring system settings, Crestrn Fusin service cnnectin settings, relay behavir settings, custm lgs, and device drivers. The Cnfigure menu als prvides selectins fr adding devices t.av Framewrk, fr cnfiguring the input and utput channels f the DMPS3 devices, and fr managing cnfiguratin settings. These menu selectins are described in the sectins that fllw. Navigatinal cntrls are als prvided n the bttm f each cnfiguratin page: Select System t display the System Setup page. Select Device Mgmt t display the Device Management page. Select DMPS Cnfig t display the Inputs/Outputs page. Select Cnfig Mgmt t display the Manage Cnfiguratin page. NOTE: If any changes are made t the.av Framewrk system settings, a warning message is displayed. Warning Message Click OK t cntinue t save the changes and Cancel t cancel changes. Once changes are saved, the green status bar n the tp f the page turns red and displays "The system is currently ffline, activate r revert cnfiguratin." System Offline Message This dialgue is nrmal, but the.av Framewrk cnfiguratin must be activated befre the system cmes back nline. Click Activate t activate any saved changes, r click Revert t revert the system back t the previus cnfiguratin. Fr mre infrmatin, refer t page 27. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 9
System Setup Navigate t Cnfigure > System t display the System Setup page. System Setup Page The system setup page prvides tabs fr cnfiguring the.av Framewrk system settings, Crestrn Fusin settings, relay cmmands, custm graphics, and device drivers. System Click the System tab t display the System settings. System Setup - System 10.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Use the System settings t cnfigure general settings fr AV Framewrk: Rm Name: Enter a name fr the rm assciated with the system. Language: Use the drp-dwn menu t select the language displayed by.av Framewrk. Time Frmat: Use the drp-dwn menu t select between 12 hur and 24 hur frmat fr displaying time. Date Frmat: Use the drp-dwn menu t select a frmat fr displaying the date. Enable SNTP: Tggle the switch t enable r disable using SNTP (Simple Netwrk Time Prtcl) t set the date and time. SNTP Server: If Enable SNTP is enabled, enter the URL f the SNTP server used t set the date and time. Time Zne: Use the drp-dwn menu t select a time zne. Date and Time: If Enable SNTP is disabled, use the pp-up windws t set the date and time manually. NOTE: Enable SNTP, SNTP Server, Date and Time, and Time Zne are hidden frm the System windw if the.av Framewrk system is cnnected t Crestrn Fusin, as.av Framewrk receives date and time settings frm Crestrn Fusin in this cnfiguratin. Enable DMPS Speaker and Prgram Output Vlume Cntrl: Tggle the switch t enable r disable the internal DMPS3 vlume cntrller. If enabled, the DMPS3 device cntrls the vlume n bth the internal amplifier (if the DMPS3 device is equipped with ne) and the prgram utput. Enable Micrphnes: If Enable DMPS Speaker and Prgram Output Vlume Cntrl is selected, tggle the switch t enable r disable the micrphnes n input devices (if applicable). Click Save t save the current settings. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 11
Crestrn Fusin Click the Crestrn Fusin tab t display the Crestrn Fusin settings. System Setup - Crestrn Fusin Use the Crestrn Fusin settings t set up a cnnectin between a Crestrn Fusin accunt and.av Framewrk: Crestrn Fusin Rm Name: Enter the name f the rm in Crestrn Fusin assciated with.av Framewrk. IPID: Enter the IP ID f the selected Crestrn Fusin rm. Enable Crestrn Fusin Scheduling: Use the drp-dwn menu t enable r disable Crestrn Fusin scheduling fr.av Framewrk. Crestrn Fusin Clud URL: Click Enable t display a field fr entering the URL f the Crestrn Fusin server. If the URL is enabled, click Disable t disable the URL. Shw Bradcast Message n Tuch Screen: Tggle the switch n r ff t enable r disable shwing bradcast messages frm Crestrn Fusin n the cnnected tuch screen. Emergency Message Timeut: Enter the time, in minutes, it takes fr an emergency bradcast frm the Crestrn Fusin server t time ut. Nn-Emergency Message Timeut: Enter the time, in minutes, it takes fr a nnemergency bradcast frm the Crestrn Fusin server t time ut. NOTE: Fr mre infrmatin abut cnnecting.av Framewrk t Crestrn Fusin, refer t page 51. NOTE: If.AV Framewrk is cnnected t a Crestrn Fusin n-premises server, cnnectins are made using either traditinal (utbund) r inbund cmmunicatins. Fr mre infrmatin, refer t the Crestrn Fusin 10 On-Premises Sftware Getting Started Guide (Dc. 7685) at www.crestrn.cm/manuals. Click Save t save the current settings. Click Enable t enable a cnnectin t Crestrn Fusin. Click Disable t disable the cnnectin. 12.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Relay Click the Relay tab t display the Relay settings. System Setup - Relay Use the Relay settings t select a relay behavir fr cnnected vide display surces, such as a prjectr: Relay Name: Enter a name fr the relay. Relay Device & Identifier: Use the drp-dwn menu t select a relay pair frm the available cnfigured devices. NOTE: A specific device relay pair may have nly ne saved cnfiguratin. Relay Behavir: Use the drp-dwn menu t select ne f the fllwing relay behavirs fr the chsen relay pair: Mmentary: The chsen vide surce is set (turned n) r reset (turned ff) by a relay cmmand, and remains in the selected state fr the duratin specified in the Timing field. Latching: The chsen vide surce is set (turned n) r reset (turned ff) by a relay cmmand, and remains in the selected state until an inverse relay cmmand is sent. Disable: Relay behavir is disabled fr the chsen vide surce. Timing: If Mmentary is selected fr Relay Behavir, enter the duratin in secnds that the vide surce remains in a specified state fllwing a relay cmmand. Click Save t save the current settings. Click Enable t enable the relay settings. Click Disable t disable the relay settings. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 13
Tuch Screen Custm Graphics Click the Tuch Screen Custm Graphics tab t display the Tuch Screen Custm Graphics panel. System Setup - Tuch Screen Custm Graphics Use the Tuch Screen Custm Graphics panel t enable r disable a custm lg graphic, t enable r disable a custm tuch screen screensaver, and t select custm screensaver backgrunds: Enable Custm Lg Graphic: Tggle the switch t enable r disable setting a custm lg graphic fr the tuch screen prject. NOTE: Custm lg graphics may be set nly if.av Framewrk is nt cnnected t Crestrn Fusin. Custm Lg Graphic URL: If Enable Custm Lg Graphic is selected, enter the URL f the desired custm lg graphic surce file. NOTE:.AV Framewrk allcates an area f 800 x 600 pixels fr the custm lg graphic. Custm graphics larger than 800 x 600 pixels are nt accepted and must be scaled dwn manually. Custm graphics smaller than 800 x 600 pixels are nt scaled up, s these graphics shuld be resized fr ptimal image quality. Supprted custm graphic file types are BMP, JPG, and PNG. 14.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Enable Tuch Screen Screensaver: Tggle the switch t enable r disable a tuch screen screensaver fr the tuch screen prject. Enable Start Buttn: If Enable Tuch Screen Screensaver is enabled and if.av Framewrk is nt cnnected t a scheduling calendar, tggle the switch t enable r disable adding a Start buttn t the tuch screen prject. NOTE: The Start buttn is used t switch t the system's default rute fr systems that are nt cnnected t a scheduling calendar. Fr mre infrmatin, refer t "Hme Screen Overview" n page 31. Start Buttn Text: If Enable Start Buttn is enabled, enter the text that is displayed n the Start buttn in the tuch screen prject. Enable Custm Screensaver Backgrunds: If Enable Tuch Screen Screensaver is selected, tggle the switch n r ff t enable r disable custm backgrund graphics fr the tuch screen screensaver. Add Custm Screensaver Backgrund URL: If Enable Custm Screensaver Backgrunds is selected, enter the URL f the desired custm backgrund image surce file. NOTE: Up t 15 custm backgrund URLs may be added. Select the plus (+) buttn next t a text field t add a new backgrund URL nce the URL has been entered. Select the minus (-) buttn next t an existing backgrund URL t delete the URL. At least ne backgrund is required if Enable Custm Screensaver Backgrunds is enabled. NOTE:.AV Framewrk allcates an area f 800 x 600 pixels fr the custm screensaver backgrund graphic. Custm graphics larger than 800 x 600 pixels are nt accepted and must be scaled dwn manually. Custm graphics smaller than 800 x 600 pixels are nt scaled up, s these graphics shuld be resized fr ptimal image quality. Supprted custm graphic file types are BMP, JPG, and PNG. Interval Between Backgrunds: Enter the duratin in secnds that a backgrund image displays n the screensaver befre switching t the next image. Tuch Screen Screensaver Sleep Time: Enter the time in secnds that the tuch screen must be idle befre the screensaver is activated. Tuch Screen Screensaver Start Time: Enter the time f day in 24-hur frmat when the screensaver becmes active. Tuch Screen Screensaver End Time: Enter the time f day in 24-hur frmat when the screensaver becmes inactive. Click Save t save the current settings. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 15
Drivers Click the Drivers tab t display the Drivers settings System Setup - Drivers Use the Drivers settings t manage and t add device drivers t.av Framewrk. The image abve shws examples f drivers fr NEC MultiSync displays, Panasnic displays, Samsung displays, and Sharp displays. Device drivers are displayed in table frmat, and the fllwing infrmatin is available fr each installed driver: Manufacturer: The manufacturer f the device Supprted Series: The mdel series supprted by the driver Device Type: The type f device (such as flat panel display r prjectr) Cmmunicatin: The cmmunicatin methd used by the device (such as IR, CEC, r serial) Driver Versin: The versin f the installed driver Each driver als has an Enable Driver switch that is used t enable r disable the driver in.av Framewrk. Navigate thrugh the available device drivers by clicking a page number n the bttm left f the windw. (Click the left r right carets [«r»] t mve frward r backward when there are mre than fur pages.) Additinally, click ne f the numbers n the bttm right f the windw (10, 25, 50, r 100) t display up t that number f drivers n a single page. 16.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Click the Search buttn t pen the Crestrn Certified Drivers web prtal (https://drivers.crestrn.i) in a new windw. After lgging in, use the Driver Search tab t lcate and dwnlad specific device drivers. NOTE: New users t the Crestrn Certified Drivers web prtal must create an accunt in rder t search fr and dwnlad device drivers. Imprting Device Drivers Additinal device drivers may be dwnladed frm the Crestrn Certified Drivers web prtal and laded int.av Framewrk. Use the fllwing prcedure t imprt device drivers int.av Framewrk with the web cnfiguratin utility: 1. Lg in t the Crestrn Certified Drivers web prtal. The Driver Search page displays. Crestrn Certified Drivers Prtal Driver Search Page 2. Use the fllwing ptins t navigate the Crestrn Certified Drivers web prtal: Type a manufacturer name, device type, cmmunicatin methd, r supprted mdel in the Glbal Filter text bx t filter drivers based n that search term. Type a search term in the text bx, r use the drp-dwn menu underneath a clumn heading t filter drivers by the driver infrmatin shwn in that clumn. Use the up and dwn arrws next t the clumn header t srt the infrmatin in that clumn in alphabetical r reverse alphabetical rder, respectively. Navigate thrugh the available device drivers by clicking a page number r by using the left and right arrws at the bttm f the page. NOTE: Click Mre next t a driver name t view additinal infrmatin abut that driver. Drivers may als be dwnladed individually frm this page. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 17
3. Select the device driver(s) by clicking the check bx t the left f a driver name. 4. Once all drivers have been selected, click Dwnlad Drivers t dwnlad the drivers t the hst cmputer. All selected drivers dwnlad as.pkg files within a single zipped file. 5. Navigate t System > Drivers in the.av Framewrk cnfiguratin utility. 6. Click Imprt at the tp right f the Drivers windw. 7. Select the.zip file cntaining the driver.pkg files, and click Open. If the driver(s) are upladed successfully, a ntificatin displays indicating that the installatin was successful. CAUTION: D nt activate the new cnfiguratin until the ntificatin displays indicating that the drivers were laded successfully. This ntificatin may take several minutes t display if a large number f drivers are upladed in the same.zip file. Driver Lad Success Windw After the uplad cmpletes, a System Ntificatin icn displays under the system status message bar. System Ntificatin Message Click the System Ntificatin icn t pen a windw that displays the driver manufacturer, mdel, type, and installatin status. The fllwing image shws the installatin status f a Sny XBR7 Series flat panel display. System Ntificatin Windw 18.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
If the driver uplad is successful, the Status clumn displays "Driver installed successfully." If the driver fails t uplad, the Status clumn displays "Driver failed t install." Ensure that the crrect file was selected and that the DMPS3 device is functining prperly. If the driver installatin cntinues t fail, cntact Crestrn custmer service fr assistance. Device Management Navigate t Cnfigure > Device Management t display the Device Management page. Device Management Page Use the Device Management page t add a device t.av Framewrk, t view infrmatin abut cnnected devices, and t edit r remve a device. Add a Device Click Add Device t add a device t.av Framewrk. The Add New Device windw pens. Add New Device Windw Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 19
Enter the fllwing infrmatin fr the chsen device. NOTE: Befre a device may be added t.av Framewrk, the chsen device must be cnnected t the DMPS3 cntrl system. Fr mre infrmatin, refer t "Appendix A: Interface Setup" n page 43. NOTE: Certain device types and mdels require additinal infrmatin t be entered (such as setting transprt cntrl details). Additinal drp-dwn menus and text fields are prvided when these device types and/r mdels are selected. Fr a cmplete list f these additinal fields, refer t "Appendix B: Add New Device Additinal Fields" n page 58. NOTE: Be sure t select the crrect device type and mdel when adding a device via an IP cnnectin, and cnfirm that the IP ID is assigned t the crrect IP device. If a device was previusly added t.av Framewrk with an IP ID that is assigned t a different device, that device registers even thugh it is n lnger cnnected. NOTE: Any endpints shuld be added t.av Framewrk prir t the additin f ther devices. Once an endpint is added t.av Framewrk, the endpint's cmmunicatin prts are available as additinal selectins fr device transprt and cntrl. Device Type: Use the drp-dwn menu t select the type f the chsen device frm the available ptins. Display Name: Enter a display name fr the device in the text field. Mdel: Use the drp-dwn menu t select the mdel f the chsen device frm the available ptins. Once the crrect device infrmatin is entered, click Save t add the device r click the x buttn t clse the windw and t discard any changes. NOTE: After a CEC-cntrlled device r a Crestrn Cnnected device is added, a ntice is displayed. The ntice fr CEC drivers is shwn as an example. Generic CEC Driver Ntice This ntice explains the Crestrn CEC and Crestrn Cnnected drivers are generic drivers that are designed t wrk with a wide variety f devices, and that device functinality using CEC r Crestrn Cnnected cntrl is limited t the level f functinality implemented by the device manufacturer. Click Acknwledge t return t the Device Management page. 20.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Certain flat panel displays and prjectrs require their drivers t be installed befre the devices are added t.av Framewrk. NOTE: The apprpriate device driver must be added t.av Framewrk befre the device may be selected and added t the system. Fr mre infrmatin n lading device drivers, refer t "Drivers," starting n page 16. NOTE: Certain device drivers require a username and passwrd t initiate cntrl cmmunicatins. Additinal User Name and Passwrd fields are prvided in the Add New Device widw fr these devices. These fields are set t ptinal r required depending n the device driver. After the apprpriate driver is added t.av Framewrk, use the drp-dwn menus in the Add New Device windw t select the device. Enter the required infrmatin fr the device, and then click Save. A windw shwing the status f the driver installatin displays. If the device driver requires a username and passwrd, the windw als shws the status f the driver authenticatin. Installing XBR7-1 Windw Click Back t return t the Add New Device windw. Click Cancel t cancel installing the device driver. Click Save t save the device and return t the Device Management page. Edit a Device After a device is added t.av Framewrk, it appears in the list f devices n the Device Management page. The display name, device type, device mdel, transprt details, and device status are prvided fr each device. Click the editing icn ( pens. ) next t a device t edit the device. The Edit Device windw Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 21
Devices Page - Edit Device Windw Use the Edit Device windw t edit the display name, transprt details, and any ther device settings prvided fr the chsen device. Click Save t save any changes r click the x buttn t clse the windw and t discard any changes. Fr flat panel displays and prjectrs with installed device drivers, a windw shwing the updated status f the device displays after changes are saved. Updating XBR7-1 Windw Click Back t return t the Edit Device windw. Click Save t save the device and return t the Device Management page. Click Test t display a windw fr sending test cmmands t the device. Fr mre infrmatin, refer t "Test a Device" n the fllwing page. 22.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Test a Device Fr flat panel displays and prjectrs with installed device drivers, click the test icn ( ) t send test cmmands t the device. A windw shwing the status f the driver test displays. Testing XBR7-1 Windw T send test cmmands t the device, select a cmmand frm the Send Cmmand drp-dwn menu, and then click Send..AV Framewrk attempts t send the chsen cmmand t the device. NOTE: The cnfiguratin utility des nt prvide feedback abut whether the cmmand was sent successfully. Verify that the cmmand was received n the device. Delete a Device Click the trash can icn ( ) next t a device t delete the device. A warning message is displayed. Click OK t delete the device r Cancel t cancel the deletin. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 23
Inputs/Outputs Navigate t Cnfigure > DMPS Cnfiguratin t display the Input/Outputs page. Inputs/Outputs Page 24.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Use the Inputs/Outputs page t cnfigure the input and utput channels f the DMPS3 device. The fllwing infrmatin may be viewed and cnfigured fr each input and utput channel unless therwise nted. NOTE: Input 9 n the DMPS3-4K-350-C and Input 8 n the DMPS3-4K-250-C are reserved fr the device's internal AirMedia presentatin gateway, and these channels display nly if an AirMedia license has been purchased and activated fr the device. The "Device" and "Endpint" fields are nt cnfigurable fr the internal AirMedia input. Fr mre infrmatin n activating a purchased AirMedia license, refer t the DMPS3-4K-250-C/DMPS3-4K-350-C DO Guide (Dc. 8215) at www.crestrn.cm/manuals. Channel: This clumn displays the number f the input r utput channel n the DMPS3 device and the chsen icn fr that channel. Type: This clumn displays the type f input r utput channel (such as HDMI input, DM input, r Audi). Icn: Use the drp-dwn menu t select an icn fr the channel. Enabled: Use the drp-dwn menu t enable r disable the channel n the.av Framewrk system. Display Name: Enter the display name f the device cnnected t the channel. Rank (Inputs Only): Use the drp-dwn menu t select a number (1 8) t determine the rder that the input displays appear when selecting a surce t present frm the tuch screen. Device: Use the drp-dwn menu t select the device cnnected t the channel. (Fr mre infrmatin n adding devices t.av Framewrk, refer t page 19.) Endpint (DM Channels Only): Use the drp-dwn menu t select a cnnected DM endpint fr the channel. Additinally, each HDMI r DM utput channel has a gear icn ( ) at the far right f its respective clumn in the Outputs windw. Click the gear icn t pen the Advanced Rute Settings windw. Advanced Rute Settings Windw Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 25
The fllwing settings may be cnfigured using the Advanced Rute Settings windw. NOTE: Fr mre infrmatin regarding advanced ruting behavir and t view advanced ruting use cases, refer t "Appendix C: Advanced Ruting Behavir and Use Cases" n page 68. Audi Fllw: Select ne f the fllwing ptins t set the audi fllw behavir fr the selected utput channel: Yes: Audi is ruted t the utput channel. Yes with Vlume Cntrl: Audi is ruted t the utput channel, and vlume may be cntrlled by the tuch screen (if Enable DMPS Speaker and Prgram Output Vlume Cntrl is selected n the System Setup page.) N: Audi is nt ruted t the utput channel. Vide Ruting Mde: Select ne f the fllwing ptins t set the vide ruting behavir fr the selected utput channel: NOTE: Output 1 supprts nly user-selected rutes. Fixed rutes and fllw rutes are supprted nly n ther vide utput channels. User Selected: The vide surce selected manually by the user is ruted t the utput channel. Fixed: Vide is ruted t the utput channel frm a fixed input channel after the first manual rute is created n the system. Fllw: Vide is ruted t the utput channel frm anther utput channel cnfigured fr manual ruting. (Fr example, if a user manually rutes Input 1 t Output 1 and Output 2 is set t fllw Output 1, Input 1 is als shwn n Output 2.) Fixed Rute: If Vide Ruting Mde is set t Fixed, select the input channel t be ruted t the selected utput channel. Fllws Rute: If Vide Ruting Mde is set t Fllw, select the utput channel t be ruted t the selected utput channel. Reslutin (HDMI Outputs Only): Use the drp-dwn menu t select the vide utput reslutin. Click Save t save any changes r click the x buttn t clse the windw and t discard any changes. Once all changes t the input and utput channels have been made, click Save at the bttm f the Inputs/Outputs page. NOTE: The DMPS3-200-C, DMPS3-300-C, and DMPS3-300-C-AEC switchers use autswitching behavir fr prt cnfiguratin and audi/vide ruting, which verrides any input r utput cnfiguratins set in.av Framewrk. 26.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Manage Cnfiguratin Navigate t Cnfigure > Cnfiguratin Management t display the Manage Cnfiguratins page. Manage Cnfiguratins Page Use the Manage Cnfiguratins page t activate new cnfiguratin settings r t revert t a prir cnfiguratin. The Manage Cnfiguratins page als prvides cntrls t dwnlad and uplad cnfiguratin files. If saved changes have been made t the cnfiguratin, click Activate Cnfiguratin t activate the new cnfiguratin settings r click Revert Cnfiguratin t revert t the previus cnfiguratin. The user interface prject displays a cnfiguratin in prgress message. Cnfiguratin in Prgress Screen Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 27
NOTE: If any changes are saved while cnfiguring.av Framewrk, the green status bar n the tp f the screen turns red and displays "The system is currently ffline, activate r revert cnfiguratin." Once this message is displayed, any cnnected devices g ffline and may nt be used, and changes must be activated fr the devices t g back nline. Once the cnfiguratin is activated, the status bar turns green and displays "The system is currently nline." Click Dwnlad Cnfiguratin t dwnlad the current cnfiguratin settings as a.zip file. The dwnladed.zip file includes XML files that cntain the current cnfiguratin settings and any device driver files that are laded in.av Framewrk. Click Uplad Cnfiguratin t uplad saved cnfiguratin files t the cnfiguratin utility. Saved cnfiguratin files may be used t cnfigure similar rms by uplading the cnfiguratin files t the crrespnding.av Framewrk systems. 28.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Users Menu The Users menu prvides a selectin fr adding, editing, and deleting users in the.av Framewrk system. Navigate t Users > Manage t display the Manage Users page. Manage Users Page Use the Manage Users page t manage, add, and edit.av Framewrk users. The fllwing infrmatin is prvided fr each user: Username: The username created fr the user NOTE: The administrative accunt fr.av Framewrk is specified by the username "admin." This username may nt be changed. Surname: The user's last name Given Name: The user's first name Passwrd: A string f asterisks indicating that a passwrd has been entered An actin buttn ( ) is als prvided fr each user in the Actin clumn f the user table. Click this buttn t edit the username, surname, given name, and passwrd fr a user. T create a new user, click Create User at the bttm right f the windw. A new rw appears in the users table. Enter the apprpriate infrmatin fr that user in the varius text fields, and then click the check ( ) buttn in the Actin clumn. (Click the x buttn at any time during this prcess t cancel creating a new user.) T delete a user, click the trash can icn ( ) in the Actin clumn fr that user. A warning message appears. Click OK t delete the user r Cancel t cancel the deletin. NOTE: The "admin" accunt may nt be deleted. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 29
Operatin The.AV Framewrk tuch screen prject prvides a cllectin f rm scheduling and BYOD (bring yur wn device) presentatin capabilities. The varius screens that cmprise the user interface are described in the sectins that fllw. Display Overview Each screen in the.av Framewrk tuch screen prject has a status bar that prvides the rm name and the time and date (set using the web-based cnfiguratin utility). The status bar als has a square status icn next t the rm name that turns red when the rm is reserved and blue if the rm is available. Each screen als has a fter bar that prvides buttns fr navigating and cntrlling the system vlume (when DMPS3 vlume cntrl is activated). The fllwing image shws a typical hme screen (the prject's default page) with the status bar and fter bar. Hme Screen (Rm Available) - Status and Fter Bars The fter bar prvides the same buttns regardless f which screen is selected. Refer t the fllwing tables fr mre infrmatin n fter buttn functinality. Navigatin Buttns The hme buttn navigates t the hme screen. The present buttn navigates t the present screen Vlume Cntrl Buttns The mic mute buttn mutes r unmutes the device micrphne. The vlume mute buttn mutes r unmutes the device vlume. The vlume lwer buttn incrementally lwers the device vlume. The vlume raise buttn incrementally raises the device vlume. 30.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
NOTE: The vlume cntrl buttns and the vlume bar are visible nly if DMPS3 speaker and vlume utput cntrls are enabled n the DMPS3 device (set using the web-based cnfiguratin utility) and if the device driver supprts vlume cntrl. Fr mre infrmatin, refer t "System" n page 10. Hme Screen Overview The hme screen is the default screen f the tuch screen prject. The hme screen indicates whether the assciated rm is either available r reserved fr meetings if.av Framewrk is cnnected t a scheduling calendar. If the rm is available, the hme screen allws an ad hc meeting t be reserved frm the tuch screen. If the rm is reserved, the hme screen displays current meeting infrmatin and the time remaining in the meeting. If.AV Framewrk is nt cnnected t a scheduling calendar, the hme screen displays a custm lg (if enabled) r the date and time, and prvides a buttn is used t switch t the system's default rute. The hme screen may be accessed at any time by tuching the hme ( fter bar. Hme Screen (N Scheduling Calendar Cnnected) ) buttn n the If.AV Framewrk is nt cnnected t a scheduling calendar, the hme screen displays the fllwing infrmatin: A custm lg (if enabled thrugh the cnfiguratin utility) The time and date (if n custm lg is enabled) A START buttn that switches t the system's default rute autmatically NOTE: The START buttn text may be custmized by using the cnfiguratin utility. Fr mre infrmatin, refer t "Tuch Screen Custm Graphics" n page 14. NOTE: Fr mre infrmatin n setting the system's default rute, refer t "Inputs/Outputs" n page 24. A Help buttn that prvides mre infrmatin n the functins and cntrls f this screen The image n the fllwing page shws a typical hme screen when.av Framewrk is nt cnnected t a scheduling calendar. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 31
Hme Screen (N Scheduling Calendar Cnnected) Hme Screen (Rm Available) If.AV Framewrk is cnnected t a scheduling calendar and the rm is available, the hme screen displays the fllwing infrmatin: The time remaining (in minutes) until the next scheduled meeting ccurs The name, rganizer, and duratin f the next scheduled meeting A RESERVE NOW > buttn that allws an ad hc meeting t be scheduled thrugh the tuch screen A Help buttn that prvides mre infrmatin n the functins f this screen The fllwing image shws a typical hme screen when the rm is available. Hme Screen (Rm Available) 32.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
If the rm is available fr the rest f the day, the hme screen displays the fllwing infrmatin: A RESERVE NOW > buttn that allws an ad hc meeting t be scheduled thrugh the tuch screen A Help buttn that prvides mre infrmatin n the functins f this screen The fllwing image shws a typical hme screen when the rm is available fr the rest f the day. Hme Screen (Rm Available fr the Rest f the Day) Hme Screen (Rm Reserved) If the rm is nt available, the hme screen displays the fllwing infrmatin: The time remaining (in minutes) until the current meeting ends The name, rganizer, and duratin f the current meeting The duratin and name f the next scheduled meeting A Help buttn that prvides mre infrmatin n the functins f this screen The image n the fllwing page shws a typical hme screen when the rm is reserved. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 33
Hme Screen (Rm Reserved) Reserving a Meeting frm the Hme Screen Use the fllwing prcedure t reserve an ad hc meeting frm the hme screen when the rm is available: 1. Tuch RESERVE NOW > n the hme screen. The new meeting screen displays. New Meeting Screen 34.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
2. Tuch ne f the available meeting end times t set the duratin f the meeting. The rm may be reserved fr up t three lengths: Until the current half hur interval ends (If the current time is 10:17AM, the end time fr this ptin is 10:30AM.) Until the current half hur interval ends plus 30 minutes (If the current time is 10:17AM, the end time fr this ptin is 11:00AM.) Until the current half hur interval ends plus 60 minutes (If the current time is 10:17AM, the end time fr this ptin is 11:30AM.) NOTE: These ptins are available nly if a meeting is nt already scheduled during that timeframe. 3. Tuch RESERVE NOW t reserve the meeting. T discard the reservatin, tuch the x buttn n the tp right f the screen. Accessing the System Inf Screen T access the System Inf screen, tuch and hld the Help buttn n the hme screen fr 20 secnds. The System Inf screen displays the device IP address, the device hstname, the Crestrn Fusin server cnnectin status, the Crestrn Fusin rm name, and the device MAC address. System Inf Screen T exit the System Inf screen and return t the hme screen, tuch the x buttn n the tp right f the screen. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 35
Present a Surce Screen Overview The present screen allws cntent t be ruted frm a cnnected device t the main display in the rm via.av Framewrk. Select ne f the available presentatin ptins n the present screen t rute that surce t the main display. The present screen prvides different ptins depending n the number f display utputs supprted by the DMPS3 device. Present a Surce Screen - Single Display If the DMPS3 device supprts a single display, the present screen appears as shwn in the fllwing image. Present a Surce Screen (Single Display) Select ne f the available presentatin ptins t rute the selected surce t the main display. The surce is cntrlled directly thrugh the tuch screen prject. Each available surce has a green r red icn in the tp right crner f the selectable bx. A green icn indicates that vide signal is present fr that surce, while a red icn indicates that vide signal is nt present. NOTE: If a surce is active, the surce's backgrund tile turns blue and a Stp buttn is shwn. Press the Stp buttn t stp ruting the surce t the display. NOTE: If ne surce is enabled fr presentatin, the cntrl page fr that surce lads autmatically when the present screen is accessed. 36.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Present a Surce Screen - Dual Display If the DMPS3 device supprts dual-display presenting, the present screen appears as shwn in the fllwing image: Present a Surce Screen (Dual Display) The present screen fr dual-display presenting cntains tw clumns (ne fr each display). Select ne f the available presentatin ptins in the apprpriate clumn t rute the selected surce t the desired display. Once a surce is chsen, the fllwing cntrls are available: Press Cntrl t display the cntrl settings fr the chsen surce. Press Stp t stp presenting the chsen surce. Press the speaker icn t the right f the chsen surce name t adjust the vlume settings fr the surce. Each available surce has a green r red icn n the right side f the surce's clumn. A green icn indicates that vide signal is present fr that surce, while a red icn indicates that vide signal is nt present. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 37
Present a Surce Screen - Mre than Tw Displays In a system with mre than tw displays, the present screen divides the displays acrss multiple pages as shwn in the fllwing image. Present a Surce Screen (Mre than Tw Displays) The present screen fr tw r mre displays is functinally similar t the present screen fr dual display. Hwever, additinal displays may be accessed by tuching the arrw icn (>) n the far right f the screen. Present a Surce Screen (Mre than Tw Displays) - Secnd Page Use the arrws n the far left and far right f the screens t navigate thrugh the available display screens. (Tw displays are shwn per screen.) Each screen cntains page indicatr dts t shw the ttal number f display screens and t indicate the screen that is currently selected (represented by an dark gray dt). 38.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Nw Presenting Screen - HDMI Surce When a surce cnnected by HDMI (such as a Laptp) is selected, the fllwing screen is displayed. Present Screen - HDMI Surce The Nw Presenting screen fr HDMI displays the input name and cnnectin type. The circle icn in the center f the screen turns green if the surce is cnnected and turns red if the surce is discnnected. Press Stp n the tp right f the screen t discnnect frm the HDMI surce. Press < BACK t return t the Present a Surce screen. (Pressing < BACK des nt discnnect the surce.) Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 39
Cnnect t AirMedia Screen When an AirMedia surce is selected and the wireless cnnectin has nt already been established, the fllwing screen is displayed. Cnnect t AirMedia Screen The Cnnect t AirMedia screen displays instructins fr cnnecting t the AirMedia device ver a wireless netwrk. Once this cnnectin has been established, AirMedia may be selected as a presentatin surce. If the cnnectin cde has been disabled, a versin f the Cnnect t AirMedia screen displays that mits this step. Fr mre infrmatin n disabling the cnnectin cde, refer t the AirMedia device's dcumentatin at www.crestrn.cm/manuals. Cnnect t AirMedia Screen - Cnnectin Cde Disabled Press < BACK t return t the Present a Surce screen. 40.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Nw Presenting Screen - AirMedia Surce When an AirMedia surce is selected (nce a wireless cnnectin has been established), the fllwing screen is displayed. Present Screen - AirMedia Surce The Nw Presenting screen fr AirMedia displays that the surce is cnnected wirelessly ver AirMedia. The circle icn in the center f the screen turns green if the surce is cnnected and turns red if the surce is discnnected. Press Stp n the tp right f the screen t discnnect frm the AirMedia surce. Press < BACK t return t the Present a Surce screen. (Pressing < BACK des nt discnnect the surce.) Nw Presenting Screen - Other Surce Devices The tuch screen prject prvides custm Nw Presenting screens fr certain surce devices, such as cable TV receivers and vide servers, which include cntrls that are specific t the device. T view mre examples f Nw Presenting screens fr ther surce devices, refer t the.av Framewrk DMPS UI Guide at www.crestrn.cm/manuals. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 41
System Ntificatins When system turn ff is triggered (fr example, by pressing the pwer hard buttn n the tuch panel), the fllwing screen displays. System Turn Off Message Screen This screen shws the number f secnds until.av Framewrk pwers ff. Tuch the Shut Dwn buttn t shut the system dwn nw, r tuch the Cntinue Use t cancel system shutdwn. 42.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Appendix A: Interface Setup This sectin prvides infrmatin n hw t cnnect varius supprted interfaces t the cntrl system. TSW-752/TSW-1052/TSW-760/TSW-1060 T cnnect a Crestrn TSW-752, TSW-1052, TSW-760, r TSW-1060 t.av Framewrk: NOTE: The.AV Framewrk tuch screen prject must be laded n the tuch screen prir t use. NOTE: The.AV Framewrk prgram defaults t IP ID 03 fr the tuch screen. NOTE: Ethernet setup screens fr the TSW-760 and TSW-1060 are shwn. Similar Ethernet setup screens are used t cnnect the TSW-752 and TSW-1052. 1. On the Setup screen, tap IP Table Setup t display the Ethernet Setup - IP Table screen. The Ethernet Setup - IP Table screen displays up t fur IP table settings. Ethernet Setup - IP Table Screen 2. T add r edit an entry, tap the crrespnding Add/Edit buttn. The Ethernet Setup - Edit IP Table Entry screen is displayed. Ethernet Setup - Edit IP Table Screen Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 43
3. Tap the text field belw CIP ID t display the n-screen hex keypad. Edit CIP ID Screen 4. Use the keypad t enter the CIP ID f the DMPS3 device running the.av Framewrk prgram. Tap the clear buttn ( ) in the text field t clear any previus entry. Tap the delete buttn ( ) t delete the last digit. Tap SAVE t save a new entry r tap < CANCEL t discard any changes. 5. Tap the text field belw IP Address / Hstname t display the n-screen keybard. Edit IP/Hst Screen 6. Use the keybard t enter the IP address r hstname f the DMPS3 device running the.av Framewrk prgram. Tap the clear buttn ( ) in the text field t clear any previus entry. Tap the delete buttn ( ) t delete the last digit. Tap SAVE t save a new entry r tap < CANCEL t discard any changes. The display returns t the Ethernet Setup - IP Table screen. 44.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
7. Tap the text field belw Prt t display the n-screen numeric keypad (nt shwn), and use the keypad t enter the prt number f the DMPS3 device running the.av Framewrk prgram (if necessary). 8. On the Ethernet Setup - IP Table screen, tap SAVE t save the current entry r DELETE t clear it. XPanel T cnfigure a virtual tuch screen prject with XPanel: NOTE: Add and cnfigure the XPanel tuch screen prject as an additinal tuch screen device in the.av Framewrk cnfiguratin utility. 1. Install XPanel by running Crestrn XPanel installer.air (fr Macintsh systems) r Crestrn XPanel installer.exe (fr Windws systems). 2. Lad the tuch screen prject.vtz file in XPanel. 3. Access the cnfiguratin screen by selecting Optins > Hst Settings. 4. Enter the IP address f the DMPS3 device running the.av Framewrk prgram. 5. Enter a unique IP ID. 6. Click Cnnect. Cnfiguratin Screen The tuch screen prject may als be displayed and tested using the.av Framewrk prgram's built-in web XPanel interface. NOTE: Prir t accessing the web XPanel interface, cnfirm that a tuch screen device has been added t the.av Framewrk system with IP ID 04. NOTE: A tuch screen device (Webx) with IP ID 04 is added by default t new.av Framewrk cnfiguratins. Fr existing.av Framewrk cnfiguratins, add a new tuch screen device t the system with IP ID 04 prir t accessing the web XPanel interface. Enter the IP address r the hstname f the DMPS3 device in the brwser URL field, appending "/avf" t the IP address r hstname (e.g., "xxx.xxx.xxx.xxx/avf"). The web XPanel interface displays. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 45
Web XPanel Interface All tuch screen prject functins and screens may be tested thrugh the web XPanel interface. Additinally, the virtual tuch screen hard buttns (with the exceptin f the center lightbulb buttn) prvide the same functinality as a physical tuch screen. AM-100/AM-101 T cnnect with a Crestrn AM-100 r an AM-101: 1. Use a web brwser t cnnect t the AirMedia device's IP address. 2. Click Device Administratin t display the lgin page, then lg in t the cnfiguratin utility. The default passwrd is "admin." 3. Select Crestrn Services Setup frm the clumn n the left side f the page. 46.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Device Administratin - Crestrn Services Setup 4. Enter the IP address f the DMPS3 in the Crestrn Cntrl System sectin. 5. Set an IP ID. 6. Set the Prt t 41794. 7. Click Apply. TT-100/TT2-100 Each Crestrn TT-100 and TT2-100 cable caddy cnnects t a USB input n the DMPS3 device. A cable caddy may be cnfigured n any USB prt ruting any input device. NOTE: Cnfiguratin is accmplished using the web-based setup screens described in the Devices sectin n page 19. NOTE: If the DMPS3 device des nt have a USB input, the cable caddy device may be cnnected t the DMPS3 device via the Cresnet netwrk, r it may be cnnected t a DigitalMedia transmitter with USB inputs that has been added t.av Framewrk. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 47
MP-B10/MP-B20 A Crestrn MP-B10 r MP-B20 media presentatin buttn panel may be cnnected t.av Framewrk in place f a tuch screen fr device ruting and surce cntrl. A buttn panel may als be cnnected directly t the DMPS3 device via Cresnet. NOTE: N mre than tw buttn panels may be added t the same cnfiguratin. A tuch screen and a buttn panel may als nt be added t the same cnfiguratin. NOTE: The buttn panels cntrl inputs ruted t display utput 1. Fr DMPS3 devices with multiple utputs, paired utputs may be cnfigured. Fr mre infrmatin, refer t "Appendix C: Advanced Ruting Behavir and Use Cases" n page 68. NOTE: If.AV Framewrk is pwered ff frm the buttn panel, pwer n functinality is disabled until after a 30-secnd perid has elapsed. NOTE: If.AV Framewrk is cntrlled using a buttn panel and a cnnected display device requires a warm-up r cl-dwn perid, buttn panel functins are disabled until the warm-up r cl-dwn perid has cmpleted. System Cnfiguratin Screen Shwing DMPS3-4K-150-C Inputs 48.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
MP-B10 Buttns with DMPS3-4K-150-C The scrll wheel n the MP-B10 adjusts vlume level. The.AV Framewrk cnfiguratin utility als prvides screens that may be used t cnfigure each buttn individually. Edit Device Windw - MP-B20 When adding r editing a buttn panel, click Cnfigure Buttns t display the Cnfigure Buttns windw. The MP-B20 Cnfigure Buttns windw is shwn n the fllwing page. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 49
Cnfigure Buttns Windw - MP-B20 Each buttn n the buttn panel may be cnfigured by clicking its respecitve buttn in the Cnfigure Buttns windw. A drp-dwn menu displays when a buttn is clicked. Select ne f the DMPS3 device's input channels frm the drp-dwn menu t map that input t the buttn, r select ne f the functins belw t map that functin t the buttn: NOTE: T view illustratins shwing buttn lcatins n the MP-B10 and MP-B20, refer t the MP-B10/MP-B20 DO Guide (Dc. 7934) at www.crestrn.cm/manuals. NOTE: The default input names fr the DMPS3 device may be custmized in the cnfiguratin utility. Fr mre infrmatin, refer t "Inputs/Outputs" n page 24. Disabled: Disables the buttn (default setting) Pwer On: Turns system pwer n Pwer Off: Turns system pwer ff Pwer Tggle: Tggles between turning system pwer n and ff Mute On: Turns speaker mute n Mute Off: Turns speaker mute ff Mute Tggle: Tggles between turning speaker mute n and ff Vide Mute: Tggles between turning vide mute n the utput(s) n and ff Vl Up: Raises the system vlume Vl Dwn: Lwers the system vlume Play: Activates the play functin fr supprted surce devices Pause: Activates the pause functin fr supprted surce devices Rewind: Activates the rewind functin fr supprted surce devices Fast Frward: Activates the fast frward functin fr supprted surce devices Menu: Activates the menu functin fr supprted surce devices Click Dne t save any changes and t exit the Cnfigure Buttns windw. 50.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
NOTE: When an MP-B20 is used t cntrl.av Framewrk, the device's 5-way navigatin pad is nly functinal when an apprpriate surce device input, such as a Blu-ray Disc player r a media server, is selected. Each buttn n the navigatin pad is mapped t the apprpriate functin n the selected device's menu. GLS-ODT-C-CN/GLS-OIR-C-CN The Crestrn GLS-ODT-C-CN and CLS-OIR-C-CN ccupancy sensrs cnnect t.av Framewrk ver Cresnet. NOTE: Cnfiguratin is accmplished with the web-based setup screens described in the Devices sectin n page 19. Crestrn Fusin Cnnecting t Crestrn Fusin T cnnect with Crestrn Fusin, use the fllwing prcedure: 1. Lg in t the Crestrn Fusin server. 2. Frm the Crestrn Fusin header tab, click Open. Crestrn Fusin Clud Header Tab 3. Frm the pull-dwn tab, click Setup. Pull-Dwn Tab 4. Click the + symbl next t Rt nde t expand the tree. Click the Rms nde t select the nde. Rt Nde 5. Click Add. Frm the drp-dwn list, click Add Rm. Add Drp-Dwn List Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 51
The Add - Rm windw pens. Add - Rm Windw 6. Frm the drp-dwn list, make a selectin and then click OK. The Add Rm t Rms windw pens with the Rm Details tab selected. Rm Details Tab 7. Enter infrmatin int the required fields as indicated by the red asterisks. Enter ptinal infrmatin as desired. 8. Click the Scheduling Details tab. Scheduling Details Tab 52.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
9. In the Server Access field, select the RmView scheduling applicatin frm the drp-dwn list. NOTE: The user may change t anther scheduling calendar at a later time. 10. Click the Prcessrs tab, and then click Add. Prcessrs Tab The Add Prcessr t Rm dialg bx pens. Add Prcessr t Rm Dialg Bx 11. Enter the prcessr infrmatin int the required fields as indicated by the red asterisks. Enter ptinal infrmatin as desired. 12. Click the Discver Symbls check bx. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 53
NOTE: If the Discver Symbls check bx is selected in the Add Prcessr t Rm dialg bx and the cntrl prgram symbl being used is versin 7.2 r higher, the Symbl Discver feature autmatically imprts the symbl infrmatin int the Crestrn Fusin database. 13. Click the Use SSL check bx if Discver Symbls was selected and if the prcessr is cnfigured fr Secure CTP Tlbx cnnectins nly. NOTE: In the Crestrn SystemBuilder and D3 Pr platfrms, the Symbl Discver feature is nt supprted n symbls belw versin 7.2. 14. Click Save & Clse. NOTE: Steps 15 thrugh 21 are nt necessary if the Discver Symbls check bx is selected in the Add Prcessr t Rm dialg bx. 15. Click the + symbl next t the prcessr name t add, edit, r delete a symbl. Add, Edit, r Delete Symbl 16. Click Add. The Add Symbl t New Prcessr windw pens with the Symbl Details tab selected. Symbl Details Tab 17. In the Symbl Name field, enter a name. Enter ptinal infrmatin as desired. 18. Set the Versin and the IPID t match the Crestrn Fusin symbl in the prgram. NOTE: The versin 8 symbl is the same as the Crestrn Fusin Rm symbl in Crestrn SIMPL. If using SystemBuilder r D3 Pr, select the versin 6 symbl. 19. Click the Use SSL check bx if the prcessr is cnfigured fr Secure CIP cnnectins nly. 20. Click Save & Clse t save the symbl, and then click Save & Clse again t save the rm. NOTE: T assciate the rm with a nde ther than the selected Rms nde, click and drag the new rm t that nde. The rm is nt assciated with the new nde. 54.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Cntrlling and Mnitring with Crestrn Fusin Rm mnitring and cntrl in Crestrn Fusin use the fllwing attributes. System Mnitrs (Read Only) TYPE Serial Serial Serial FUNCTION Fusin Errr Message Fusin Lg Text Fusin Device Usage Cntrller (Read Only) TYPE Serial Serial Serial Serial Serial Digital FUNCTION Name Hst Name IP Address Subnet Mask Default Ruter Cnnected Envirnment (Read Only) TYPE Analg System Vlume FUNCTION Envirnment (Read/Write) TYPE Digital Digital System Pwer System Mute FUNCTION Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 55
Switch (Read Only) TYPE Serial Serial Serial Serial Serial Serial Serial Serial Serial Serial Serial Serial Serial Serial Serial Serial Serial Digital FUNCTION Display Name Mdel Input Channels Enabled Output Channels Enabled Input 1 Name Input 2 Name Input 3 Name Input 4 Name Input 5 Name Input 6 Name Input 7 Name Input 8 Name Input 9 Name Input 10 Name Output 1 Name Output 2 Name Output 3 Name Cnnected Mnitr the assets cnnected t the system using the fllwing attributes: DM Transmitter (Read Only) TYPE Digital Cnnected FUNCTION DM Receiver (Read Only) TYPE Digital Cnnected FUNCTION TSW-752/TSW-1052 (Read Only) TYPE Digital Cnnected FUNCTION TSW-760/TSW-1060 (Read Only) TYPE Digital Cnnected FUNCTION Display (Read Only) TYPE Digital Cnnected FUNCTION 56.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Blu-ray Disc Player (Read Only) TYPE Digital Cnnected FUNCTION AM-100/AM-101 (Read Only) TYPE Digital Cnnected FUNCTION MP-B10 (Read Only) TYPE Digital Cnnected FUNCTION TT-100 (Read Only) TYPE Digital Cnnected FUNCTION Fusin Occupancy Sensr (Read Only) TYPE Analg Digital Analg Serial Digital Digital FUNCTION Online Status OccSensrEnabled OccSensrTimeut Rm Occupancy Infrmatin Rm Occupied Rm Unccupied Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 57
Appendix B: Add New Device Additinal Fields Refer t the belw tables fr infrmatin abut the varius fields assciated with each device class when adding a device t.av Framewrk. AirMedia Add New Device Fields - AirMedia FIELD DESCRIPTION SUPPORTED VALUES Display Name Mdel Cntrl IP ID The user-defined display name f the AirMedia device The mdel name f the supprted AirMedia device The transprt methd used fr device cntrl The IP ID f the AirMedia device. AM-100, AM-101 IP ID Blu-ray Player Add New Device Fields - Blu-ray Player FIELD DESCRIPTION SUPPORTED VALUES Display Name Mdel Cntrl Cmmunicatins Prt The user-defined display name f the Blu-ray Disc player The mdel name f the supprted Blu-ray Disc player The transprt methd used fr device cntrl The device prt used t cntrl the Blu-ray Disc player [Any supprted Blu-ray Disc player] IR [Any unused IR prt n the.av Framewrk system] Buttn Panel Add New Device Fields - Buttn Panel FIELD DESCRIPTION SUPPORTED VALUES Display Name Mdel Cntrl Cresnet ID 1 IP ID 2 The user-defined display name f the buttn panel device The mdel name f the supprted buttn panel device The transprt methd used fr device cntrl The Cresnet ID f the buttn panel device The IP ID f the buttn panel device MP-B10 Cresnet, MP-B10 IPID, MP-B20 Cresnet, MP-B20 IPID Cresnet (fr MP-B10 Cresnet and MP-B20 Cresnet), IP ID (fr MP-B10 IPID and MP-B20 IPID) 1. This field is prvided when MP-B10 Cresnet r MP-B20 Cresnet is selected fr Mdel. 2. This field is prvided when MP-B10 IPID r MP-B20 IPID is selected fr Mdel. 58.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
NOTE: The Add New Device windw als prvides a Cnfigure Buttns selectin when Buttn Panel is selected as the device type, which may be used t cnfigure individual buttns n the buttn panel. Fr mre infrmatin, refer t "MP-B10/MP-B20" n page 48. Cable Caddy Add New Device Fields - Cable Caddy FIELD DESCRIPTION SUPPORTED VALUES Display Name Mdel Cntrl Default Surce 1 Secndary Surce 1 Cresnet ID 2 Cmmunicatins Prt 3 The user-defined display name f the cable caddy device The mdel name f the supprted cable caddy device The transprt methd used fr device cntrl The default DMPS3 device input channel used by the cable caddy device The secndary DMPS3 device input channel used by the cable caddy device The Cresnet ID f the cable caddy device The device prt used t cntrl the cable caddy device TT-100 Cresnet, TT-100 USB, TT2-100 Cresnet, TT2-100 USB Cresnet (fr TT-100 Cresnet and TT2-100 Cresnet), USB (fr TT-100 USB and TT2-100 USB) [Any unused DMPS3 device input channel] [Any unused DMPS3 device input channel] [Any unused USB input n the.av Framewrk system] 4 1. The TT-100 and TT2-100 first attempt t create a rute frm the default surce. If the TT-100 and TT2-100 cannt create a rute frm the default surce, they autmatically switch t the secndary surce. 2. This field is prvided when TT-100 Cresnet r TT2-100 Cresnet is selected fr Mdel. 3. This field is prvided when TT-100 USB r TT2-100 USB is selected fr Mdel. 4. The DMPS3 device must supprt USB ruting fr the DMPS3 device prt t appear n this list. If a DMPS3-4K-200-C r DMPS3-4K-300-C is used, a device that supprts USB ruting (such as the DM-TX-401-C) must be added t.av Framewrk. Cable TV Add New Device Fields - Cable TV FIELD DESCRIPTION SUPPORTED VALUES Display Name Mdel Cntrl Cmmunicatins Prt 1 IP 2 The user-defined display name f the cable TV receiver The mdel name f the supprted cable TV receiver The transprt methd used fr device cntrl The device IR prt used t cntrl the cable TV receiver The IP address f the cable TV receiver 1. This field is prvided when an IR-cntrlled cable TV receiver is selected fr Mdel. 2. This field is prvided when an IP-cntrlled cable TV receiver is selected fr Mdel. [Any supprted cable TV receiver] IR, IP [Any unused IR prt n the.av Framewrk system] Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 59
Crestrn IO Add New Device Fields - Crestrn IO FIELD DESCRIPTION SUPPORTED VALUES Display Name Mdel Cntrl Cresnet ID The user-defined display name f the Crestrn IO device The mdel name f the supprted Crestrn IO device The transprt methd used fr device cntrl The Cresnet ID f the Crestrn IO device C2N-IO Cresnet Digital Graphics Engine Add New Device Fields - Digital Graphics Engine FIELD DESCRIPTION SUPPORTED VALUES Display Name Mdel Cntrl IP ID The user-defined display name f the digital graphics engine The mdel name f the supprted digital graphics engine The transprt methd used fr device cntrl The IP ID f the digital graphics engine DM-DGE-200C IP ID DigitalMedia Receiver Add New Device Fields - DigitalMedia Receiver FIELD DESCRIPTION SUPPORTED VALUES Display Name Mdel Cntrl 1 Digital Media IP ID 1 The user-defined display name f the DigitalMedia receiver The mdel name f the supprted DigitalMedia receiver The transprt methd used fr device cntrl Sets whether the DigitalMedia receiver is cnnected t the DMPS3 device via a DM cnnectin The IP ID f the DigitalMedia receiver 1. These fields are prvided when N is selected fr Digital Media. DM-RMC-4K-100-C, DM-RMC-4K-100-C-1G IP ID Yes, N 60.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
DigitalMedia Scaling Receiver Add New Device Fields - DigitalMedia Scaling Receiver FIELD DESCRIPTION SUPPORTED VALUES Display Name Mdel Cntrl 1 Digital Media IP ID 1 (Cntinued n fllwing page) The user-defined display name f the DigitalMedia scaling receiver The mdel name f the supprted DigitalMedia scaling receiver The transprt methd used fr device cntrl Sets whether the DigitalMedia scaling receiver is cnnected t the DMPS3 device via a DM cnnectin The IP ID f the DigitalMedia scaling receiver DM-RMC-200-C, DM-RMC-4K-SCALER-C, DM-RMC-SCALER-C IP ID Yes, N Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 61
Add New Device Fields - DigitalMedia Scaling Receiver (cntinued) Reslutin FIELD DESCRIPTION SUPPORTED VALUES (Cntinued n fllwing page) The desired scaling reslutin utput f the DigitalMedia scaling receiver EDID Preferred, 640x480 60Hz PC, 720x480p 60Hz NTSC, 720x576i 25Hz PAL, 720x576p 50Hz PAL, 800x600 60Hz PC, 848x480 60Hz PC, 1024x768 60Hz PC, 1280x720p 50Hz PAL, 1280x720p 60Hz NTSC, 1280x768 60Hz PC, 1280x768 60Hz PC RB, 1280x800 60Hz PC, 1280x800 60Hz PC RB, 1280x960 60Hz PC, 1280x1024 60Hz PC, 1360x768 60Hz PC, 1366x768 60Hz PC, 1366x768 60Hz PC RB, 1400x1050 60Hz PC, 1400x1050 60Hz PC RB, 1440x900 60Hz PC, 1440x900 60Hz PC RB, 1600x900 60Hz PC RB, 1600x1200 60Hz PC, 1680x1050 60Hz PC, 1680x1050 60Hz PC RB, 1920x1080i 25Hz PAL, 1920x1080i 30Hz NTSC, 1920x1080p 50Hz PAL, 1920x1080p 60Hz NTSC, 1920x1200 60Hz PC RB, 2048x1152 60Hz PC RB, 2048x1080 At 60Hz 2, 1792x1344 PC 2, 1856x1392 PC 2, 1920x1440 PC 2, 2048x1536 PC 2, 2560x1080 PC 2, 2560x1440 PC 2, 2560x1600 PC RB 2, 3840x2160p At 24Hz 2, 3840x2160p At 25Hz 2, 3840x2160p At 30Hz 2, 4096x2160p At 24Hz 2, 4096x2160p At 25Hz 2, 4096x2160p At 30Hz 2, 3840x2160p At 50Hz 2, 3840x2160p At 60Hz 2, 4096x2160p At 50Hz 2, 4096x2160p At 60Hz 2, 62.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Add New Device Fields - DigitalMedia Scaling Receiver (cntinued) Reslutin (cntinued) FIELD DESCRIPTION SUPPORTED VALUES Display Mde The desired scaling reslutin utput f the DigitalMedia scaling receiver The desired display mde f the DigitalMedia scaling receiver 4096x2160p At 60Hz PC VESA RB V2 2, 1680x720 At 24Hz 2, 1680x720 At 25Hz 2, 1680x720 At 30Hz 2, 1680x720 At 50Hz 2, 1680x720 At 60Hz 2, 2560x1080 At 24Hz 2, 2560x1080 At 25Hz 2, 2560x1080 At 30Hz 2, 2560x1080 At 50Hz 2, 2560x1080 At 60Hz 2, Maintain, Stretch, Zm 1. These fields are prvided when N is selected fr Digital Media. 2. These utput reslutins are available nly when the DM-RMC-4K-SCALER-C is used. DigitalMedia Transmitter Add New Device Fields - DigitalMedia Transmitter FIELD DESCRIPTION SUPPORTED VALUES Display Name Mdel Cntrl 1 Digital Media IP ID 1 The user-defined display name f the DigitalMedia transmitter The mdel name f the supprted DigitalMedia transmitter The transprt methd used fr device cntrl Sets whether the DigitalMedia transmitter is cnnected t the DMPS3 device via a DM cnnectin The IP ID f the DigitalMedia transmitter 1. These fields are prvided when N is selected fr Digital Media. DM-TX-200-C-2G, DM-TX-201-C, DM-TX-401-C, DM-TX-4K-100-C-1G, DM-TX-4K-202-C, DM-TX-4K-302-C IP ID Yes, N Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 63
Flat Panel Display Add New Device Fields - Flat Panel Display FIELD DESCRIPTION SUPPORTED VALUES Display Name Mdel Cntrl Default Input 1 Cmmunicatins 2, 5, 6 Prt IP ID 3 IP 4 Prt 4 Channel 4, 5 User Name 7 Passwrd 7 The user-defined display name f the flat panel display The mdel name f the supprted flat panel display The transprt methd used fr device cntrl The default HDMI input f the flat panel display The device prt used t cntrl the flat panel display The IP ID f the flat panel display The IP address f the flat panel display The prt number f the flat panel display The Wi-Fi netwrk channel f the flat panel display A username (required r ptinal) fr initiating device cntrl cmmunicatins A passwrd (required r ptinal) fr initiating device cntrl cmmunicatins [Any supprted flat panel display] CEC, IP ID, IP, Serial, IR HDMI1, HDMI2, HDMI3, HDMI4 Switcher_1_CEC, Switcher_2_CEC, Cntrller_1_IR, Cntrller_2_IR, Cntrller_3_IR, Cntrller_4_IR, Cntrller_1_Serial, Cntrller_2_Serial 1. This field is prvided when a flat panel display that uses a transprt methd fr device cntrl is selected. 2. This field is prvided when a CEC cntrlled flat panel display is selected fr Mdel. 3. This field is prvided when a Crestrn Cnnected cntrlled flat panel display is selected fr Mdel. 4. Sme r all f these fields are prvided when an IP cntrlled flat panel display is selected fr Mdel and IP is selected fr Cntrl. 5. Sme r all f these fields are prvided when a serially cntrlled flat panel display is selected fr Mdel and Serial is selected fr Cntrl. 6. Sme r all f these fields are prvided when an IR cntrlled flat panel display is selected fr Mdel and IR is selected fr Cntrl. 7. These fields are prvided when a device driver fr a flat panel display requires a username and passwrd t initiate cntrl cmmunicatins. 64.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Occupancy Sensr Add New Device Fields - Occupancy Sensr FIELD DESCRIPTION SUPPORTED VALUES Display Name Mdel Cntrl Cresnet ID Use Sensr Timeut The user-defined display name f the ccupancy sensr device The mdel name f the supprted ccupancy sensr device The transprt methd used fr device cntrl The Cresnet ID f the ccupancy sensr device Sets whether system timeut is determined by the ccupancy sensr device (Fr example, if Yes is selected, the system times ut if n ccupancy is detected in a rm) Timeut Minutes 1 The number f minutes that it takes fr the system t time ut if sensr timeut is nt used Turn System On Turn System Off Rute Default Vide Sets whether the.av Framewrk system turns n if mtin is detected by the ccupancy sensr device Sets whether the.av Framewrk system turns ff if n ccupancy is detected by the ccupancy sensr device Sets whether default vide is ruted when the.av Framewrk system is turned n by the ccupancy sensr. 1. This field is prvided when N is selected fr Use Sensr Timeut. GLS-ODT-C-CN, GLS-OIR-C-CN Cresnet Yes, N Yes, N Yes, N Yes, N Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 65
Prjectr Add New Device Fields - Prjectr FIELD DESCRIPTION SUPPORTED VALUES Display Name The user-defined display name f the prjectr Mdel The mdel name f the supprted prjectr [Any supprted prjectr] Cntrl The transprt methd used fr device cntrl IP, Serial Default Input The default HDMI input f the prjectr HDMI1, HDMI2, HDMI3, HDMI4 IP 1 Prt 1 Cmmunicatins Prt 2 The IP address f the prjectr The prt number f the prjectr The device prt used t cntrl the prjectr Warm Up Time 3, 4 The duratin that a "warming up" message is displayed n the.av Framewrk user interface after the prjectr is turned n, in secnds Cl Dwn Time 3, 4 User Name 5 Passwrd 5 The duratin that a "cling dwn" message is displayed n the.av Framewrk user interface after the prjectr is turned ff, in secnds A username (required r ptinal) fr initiating device cntrl cmmunicatins A passwrd (required r ptinal) fr initiating device cntrl cmmunicatins [Any unused Serial prt n the.av Framewrk system] [Minimum value is the default defined by the driver; maximum value is 300 secnds] [Minimum value is the default defined by the driver; maximum value is 300 secnds] 1. These fields are prvided when IP is selected fr Cntrl. 2. This field is prvided when Serial is selected fr Cntrl. 3. All cntrls n the user interface are temprarily lcked ut until the message times ut. 4. These fields are prvided nly if the prjectr driver supprts this functinality. 5. These fields are prvided when a device driver fr a prjectr requires a username and passwrd t initiate cntrl cmmunicatins. NOTE: If the selected prjectr driver supprts vide mute, a blank prjectr screen is utputted t the prjectr when vide mute is enabled. Rm Availability Hallway Sign Add New Device Fields - Rm Availability Hallway Sign FIELD DESCRIPTION SUPPORTED VALUES Display Name Mdel Cntrl Cresnet ID The user-defined display name f the rm hallway sign The mdel name f the supprted rm hallway sign The transprt methd used fr device cntrl The Cresnet ID f the rm hallway sign SSW/SSC Cresnet 66.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Tuch Screen Add New Device Fields - Tuch Screen FIELD DESCRIPTION SUPPORTED VALUES Display Name Mdel Cntrl IP ID The user-defined display name f the tuch screen device The mdel name f the supprted tuch screen device The transprt methd used fr device cntrl The IP ID f the tuch screen device TSW-1052, TSW-1060, TSW-752, TSW-760, Webx IP ID NOTE: Select Webx using the Mdel drp-dwn menu when cnfiguring a virtual tuch screen prject with the.av Framewrk prgram's built-in web XPanel interface. Fr mre infrmatin, refer t "XPanel" n page 45. Vide Server Add New Device Fields - Vide Server FIELD DESCRIPTION SUPPORTED VALUES Display Name Mdel Cntrl IP ID Cmmunicatins Prt 1 IP 2 The user-defined display name f the vide server device The mdel name f the supprted vide server device The transprt methd used fr device cntrl The IP ID f the tuch screen device The device prt used t cntrl the vide server device The IP address f the vide server device 1. This field is prvided when IR is selected fr Cntrl. 2. This field is prvided when IP is selected fr Cntrl. [Any supprted vide server device] IR, IP [Any unused IR prt n the.av Framewrk system] Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 67
Appendix C: Advanced Ruting Behavir and Use Cases.AV Framewrk allws fr advanced ruting t be cnfigured n the DMPS3 device t supprt a wide variety f cmmercial and educatin applicatins. This appendix explains the different advanced ruting behavirs and prvides sample use cases t shw hw these advanced rutes functin within different.av Framewrk systems. NOTE: Fr mre infrmatin n cnfiguring advanced ruting behavir using the web interface cnfiguratin utility, refer t page 24. NOTE: Output 1 supprts manual rutes nly. Fixed rutes and fllws rutes are nly supprted n ther vide utput channels. Interactive Classrm (Fixed Ruting) When Fixed vide ruting is selected fr a DMPS3 utput channel, the utput channel receives a vide surce frm a chsen input channel nly after the first manual rute is created n the system. Fr example, if Output 2 is cnfigured t receive a fixed vide rute frm Input 6, this rute remains cnstant regardless f any manual rutes that are created n the system. The fllwing use case describes an interactive classrm that uses fixed ruting behavir. System cmpnents: DMPS3 Device: DMPS3-4K-300-C Device inputs Input 1: Instructr PC Input 2: Laptp Input 3: Dcument camera Input 4: AM-101 AirMedia device Input 5: Blu-ray Disc player Device utputs Output 1: Nt used Output 2: Display mnitr (cnfigured fr fixed ruting t Input 1) Output 3: Prjectr (cnfigured fr manual ruting) LAN cnnectin TSW-1060 tuch screen Cresnet cnnectin GLS-ODT-C-CN ccupancy sensr In this use case, the classrm display mnitr (Output 2) is cnfigured t have a fixed rute t the instructr PC (Input 1). This fixed rute remains cnstant even if ne f the ther inputs, such as the Laptp (Input 2), is manually ruted t the prjectr (Output 3) thrugh the.av Framewrk tuch screen prject. 68.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
Twn Hall Meeting Space (Fllws Ruting) When Fllws vide ruting is selected fr a DMPS3 utput channel, the utput channel receives a vide surce frm anther chsen utput channel that is cnfigured fr manual ruting. Fr example, if a user manually rutes vide frm Input 1 t Output 1, and Output 2 is set t fllw Output 1, vide frm Input 1 is als shwn n Output 2. The fllwing use case describes a twn hall meeting space that uses fllws ruting behavir. System cmpnents: DMPS3 Device: DMPS3-4K-200-C Device inputs Input 1: DM-TX-100-C-1G DigitalMedia transmitter Input 2: AM-101 AirMedia device Input 3: Blu-ray Disc player Input 4: Digital signage player Device utputs Output 1: Display mnitr fr speaker (manual ruting) Output 3: DM-RMC-4K-SCALER-C cnnected t large display mnitr fr audience (cnfigured fr fllws ruting t utput 1) LAN cnnectin TSW-1060 tuch screen In this use case, the large display mnitr fr the audience (Output 3) is cnfigured t fllw any manual rute created between an input and the speaker's display mnitr (Output 1) thrugh the tuch screen prject. Fr example, if a manual rute is created between a laptp that is presenting wirelessly via AirMedia (Input 2) and the speaker's display mnitr (Output 1), the vide surce ruted frm the laptp is als ruted t the large display mnitr (Output 3). Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 69
Appendix D: Deleting the.av Framewrk Prgram If necessary, the.av Framewrk prgram may be deleted frm the DMPS3 device. Use the fllwing prcedure t delete the.av Framewrk prgram: 1. Open Crestrn Tlbx, and then cnnect t the DMPS3 device. 2. Select View > System Inf. The System Inf windw lads. 3. Lcate the Prgram sectin n the tp right f the System Inf windw, and then click the buttn. A new dialg bx pens. 4. Select the.av Framewrk prgram, and then click Erase. (.AV Framewrk is lcated in Prgram 01 by default.) 5. In the new dialg bx, click Erase All Prgram Files. 6. When the cnfirmatin dialg bx pens, click Yes. The.AV Framewrk prgram may als be verwritten by a custm user prgram. 70.AV Framewrk Sftware fr DMPS3 Operatins Guide DOC. 7887G
This page is intentinally left blank. Operatins Guide DOC. 7887G.AV Framewrk Sftware fr DMPS3 71
Crestrn Electrnics, Inc. Operatins Guide DOC. 7887G 15 Vlv Drive, Rckleigh, NJ 07647 (2046217) Tel: 888.CRESTRON 03.18 Fax: 201.767.7576 Specificatins subject t www.crestrn.cm change withut ntice.