SCIENCE BUILDING D101 TECH SUPPORT Help Desk: x4357 For priority support, please use the classroom phone. NOTES At the end of class: Turn off the projector. Log off the teaching station. Turn off the room lights. PLEASE LEAVE THIS MANUAL ON THE COUNTERTOP OF THE INSTRUCTOR S STATION
Science Building D101 THIS ROOM IS EQUIPPED WITH: COMPUTER PC Laptop Connection Wireless Presenter EQUIPMENT OVERVIEW VIDEO Video Projector Document Camera VCR/DVD Player AUDIO Wall Speakers Stereo Receiver Wireless Microphone D101 AV SWITCH AMX Selector TURNING POINT Clicker Receiver VCR/DVD Combo AMX Components *The AMX Components have no user-adjustable functions. Please do not attempt to modify any existing settings. Power Conditioner AMX Controller 1
PROJECTOR Panasonic PT-D6000 Projector This room is equipped with a touch-sensitive AMX audio/video selector that allows users to quickly and easily switch between different sources. Simply follow the on-screen instructions to control the audio or video device of your choosing. Welcome Screen Main Menu 2 Projector Menu
AUDIO SYSTEM Built-In Stereo Receiver To adjust the audio settings, select the Volume Control on the AMX Selector and use the up/down arrows to reach the desired level. The audio source is always determined by the last device selected in the Matrix. Therefore, if the last selection was Computer, the sound will be generated by the Computer s audio until a new selection is made. Windows System Volume Volume Control Note: When the computer is used for audio, sound is also controlled via the Windows System Volume. This may also need to be adjusted to reach your desired volume. Wireless Microphone This room is equipped with a built-in wireless microphone that will be found in the computer cabinent. To use the microphone: 1.) Turn the microphone on by switching the ON/OFF switch to the ON position on the receiver attached to the microphone. 2.) After using the microphone, turn the device OFF by placing the ON/OFF switch into the off position. 3.) The volume of the microphone is controlled through the AMX system in the Volume Control. 3
DOCUMENT CAMERA Samsung SDP-860 Document Camera To use the document camera: 1.) Select DOCUMENT CAMERA from the AMX Selector s MATRIX Menu. (See page 2.) 2.) To view the document camera on the teaching station monitor, along with the projector, press the SOURCE button marked on the monitor. Source Zoom Control 4
VCR/DVD Toshiba SD-V296 VCR/DVD Combo To use the VCR/DVD Combo: 1.) Select VCR or DVD from the AMX Selector s MATRIX Menu. (See page 2.) 2.) To access the DVD Navigation screen, press the MENU PAGE button in the lower right corner on the DVD Playback Control page. Note: The DVD Navigation screen is used to navigate through a DVD s Menu. For example, accessing scene selection. DVD Playback Controls DVD Navigation Menu Page VCR Playback Controls 5
COMPUTER HP Computer To use the computer: 1.) LOGON to the computer using your UWSP username and password. 2.) To display the computer s screen on the video projector, select COMPUTER in the AMX Selector s Matrix Switcher. (See Page 2.) Unlocking a computer: If the PC s screen indicates that it has been locked by another user, you can unlock the system by restarting it. To restart a locked computer: 1.) Press and hold the POWER button on the computer until it shuts down (typically, you will need to hold the button for 5 to 10 seconds before the sequence will begin). 2.) Press the POWER button again to restart the PC. When the login screen appears, enter your UWSP username and password. NOTE: Please remember to logoff the computer when finished. After 60 minutes of inactivity, classroom computers will automatically lock, preventing subsequent users from logging on. 6
LAPTOP VGA Laptop Connection To connect a laptop computer: 1.) Plug the VGA cable into the VGA port on your laptop and, if audio is desired, plug the 1/8 stereo cable into your laptop s headphone jack. (If your laptop does not have a VGA port, contact Tech Support for further assistance. Also, some laptops require proper configuration to utilize an external display. To configure your laptop accordingly, please refer to the instructions provided by your manufacturer.) 2.) Select LAPTOP from the AMX Selector s MATRIX Menu. Connecting to the Internet: Many classrooms are equi pped with an Ethernet cable allowing for wired internet access. It is advisable to use a wired connection whenever possible. Wireless internet connections are also available in most classrooms. For instructions on configuring your laptop, contact Help Desk at x4375 or visit www.uwsp.edu/it/network/wireless. 7
LIGHTING Lighting System Preset Lighting Configuration A B C A All On B Projector C Lecture D E F D Cans High E Movie F Cans Low OFF OFF All Off A All On Turns all fluorescent lights on B Projector Turns the fluorescent lights on, dimmer in the front for projector screen viewing C Lecture Turns the fluorescent lights on, brighter in the front for demonstration and lecutre D Cans High Turns the canned lights on high,along with stair egress lighting E Movie Turns the canned lights on, adjusted for note-taking when viewing movies F Cans Low Turns the can lights on low,along with stair egress lighting Unused Unused OFF All Off Turns all the lights off 8
At the end of class: At the end of class: SCIENCE BUILDING D101 TECHNOLOGY PROBLEMS For issues related to technical services, please consult the technical support information found on the front cover. MAINTENANCE EMERGENCIES During the hours of 7 AM - 3:30 PM, issues related to building maintenance may be directed to Facility Services. During off-hours, maintenance emergencies may be reported to Protective Services. SEE FRONT x4219 FACILITY SERVICES SECURITY CONCERNS For issues related to building or campus security, please contact Campus Protective Services. POLICE/FIRE EMERGENCIES NOTE: There will be 7-12 seconds of silence before the phone rings. Please do not hang up. x3456 CAMPUS PROTECTIVE SERVICES 9-911 SPPD/SPFD D101 Lobby FIRST FLOOR