mm Pitch Miniature Connector A A Series Product Specifications Rating Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted in the high density. The crimping case is structured in the mm pitch grid, so that connectors can be arranged for use.. Variation in Number of Contacts In addition to the dip type, SMT and crimping types are available with broad variations.. Stacking Variation When the connector is used for board to board, set mm between boards in conjunction with the pin header AB, or 5.1mm between boards in conjunction with the pin header AC. Item Specification Condition 1. Insulation Resistance. Withstanding voltage. Contact Resistance. Vibration 5. Humidity (Steady state) 00M min. No flashover or insulation breakdown. 15m max No electrical discontinuity of μs or more Insulation resistance : 00M min. 500V DC 50V AC/1 minute 0.1A Frequency : to 55Hz, single amplitude of 0.75mm, hours in each of the directions. 9 hours at temperature of 0ç and humidity of 90% to 95%. Humidity resistance ( 5ç : 0 minutes 15 to 5ç : 5 minutes max. No damage, cracks, or parts looseness. (Steady state) (15ç : 0 minutes 15 to 5ç : 5 minutes max.) 5 cycles 7. Operating Life Contact resistance : 0m max. 0 cycles. Resistance to Soldering heat Current rating 1A Operating Temperature Range 55 to +5ç (Note 1) Storage Temperature Range to +0ç (Note ) Voltage rating 00V AC Operating Moisture Range 0 to 0% Storage Humidity Range 0 to 70% (Note ) No deformation of components affecting performance. Solder bath : 0ç for seconds Manual soldering : DIP : 50ç for seconds SMT : 0ç for 5 seconds Note 1 : Includes temperature rise caused by current flow. Note : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Applications VTR, vehicle telephones, and other various kinds of electronic equipment Materials / Finish Part Material Finish Remarks Pin header (Through hole) Polyamid Receptacle (Through hole) PBT Black Insulator Pin header (SMT) UL9V-0 PPS (Note) Light brown Receptacle (SMT) Crimping socket Pin header PBT Brass Black Contact Receptacle Selective gold plated --- Phosphor bronze Crimping contact Note : Slight variations in color of the plastic compounds do not affect form,fit or function of the connector. C
A A Series mm Pitch Miniature Connector Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Pin Header (DIP type) AB - 1 P - DS 1 5 Receptacle (DIP type) A - D - DS 1 5 1 5 1 5 Series Name: AB : double row AB : single row AC : double row (low profile product) Number of contacts : Double row...,,,, 1, 1, 1, 1, 0,,,,, 0,,, 0, 50 ( and 50 contacts correspond to the right angle type only. Straight angle type corresponds to the AC type.) Single row...,,, 5,, 7,, 9,, 11, 1, 1, 1, 15, 1 P, PA: Pin header Contact pitch : mm Contact type DS : Right angle type DSA : Straight type Series Name : A : double row AC : double row AD : double row (for FFC, FFC) (Note) Number of contacts : :, 50 C, D :,,,, 1, 1, 1, 1, 0,,,, 50 DA : Receptacle Contact pitch : mm Contact type DS : Right angle type DSA : Straight type (lead length : mm) DSC : Straight type (lead length : mm) DSE : Straight type (lead length : 1.7mm) Note : A standoff has been added to the center portion of the connector to provide stable mounting. Crimping Socket AB - D - C 1 5 1 5 Series Name : AB : double row AB : single row Number of contacts : Double row...,,,, 1, 1, 1, 0,,,, Single row...,,, 5,, 7,, 9,, 1, 15, 1, 1 Contact alignment : D : double row S : single row Contact pitch : mm Connection type : C : crimping C11
A A Series mm Pitch Miniature Connector Crimping Contact A B - 0 SCFC 1 1 Series Name : A Series No. : B Applicable cable size 0 : to 0 AWG : to AWG Packaging type SCFC : Reel SCC : Bag Pin Header (SMT type) A A - P A - SV 1 5 7 Receptacle (SMT type) A A - D A - SV 1 5 7 1 5 7 1 5 7 Series Name : A Series No. : Positioning Boss : A : With boss No symbol : Without boss Number of contacts :,,,, 1, 1, 1, 1, 0,,, 0,,, 0, 50 P : Pin header A : Selective gold plating Contact pitch : mm Contact type SV : Board virtical type Series Name : A Series No. : Positioning Boss : A : With boss No symbol : Without boss Number of contacts :,,,, 1, 1, 1, 1, 0,,, 0, D : Receptacle A : Selective gold plating Contact pitch : mm Contact type SV : Virtical type C1
A A Series mm Pitch Miniature Connector Pin Header AB Straight Type No. of Contacts A B RoHS AB-0PA-DSA(51) AB-0PA-DSA(51) AB-0PA-DSA(51) AB-PA-DSA(51) AB-1PA-DSA(51) AB-1PA-DSA(51) AB-1PA-DSA(51) AB-1PA-DSA(51) AB-0PA-DSA(51) AB-PA-DSA(51) AB-PA-DSA(51) AB-PA-DSA(51) AB-PA-DSA(51) AB-0PA-DSA(51) AB-PA-DSA(51) 1-001-1 51 1-00- 51 1-00-7 51 1-00-0 51 1-005- 51 1-00-5 51 1-007- 51 1-00-0 51 1-009- 51 1-0- 51 1-011-5 51 1-01- 51 1-01-0 51 1-01- 51 1-015- 51 1 1 1 1 0 0 1.0 1.0 1.0.0.0.0.0 1.0 1.0 1.0.0.0.0 Note : Please, order the product per 0 pcs. AB Right Angle Type AB-0PA-DS(51) AB-0PA-DS(51) AB-0PA-DS(51) AB-PA-DS(51) AB-1PA-DS(51) AB-1PA-DS(51) AB-1PA-DS(51) AB-1PA-DS(51) AB-0PA-DS(51) AB-PA-DS(51) AB-PA-DS(51) AB-PA-DS(51) AB-PA-DS(51) AB-0PA-DS(51) AB-PA-DS(51) AB-PA-DS(51) AB-50PA-DS(51) 1-051-5 51 1-05- 51 1-05-0 51 1-05- 51 1-055- 51 1-05-9 51 1-057-1 51 1-05- 51 1-059-7 51 1-00- 51 1-01-9 51 1-0-1 51 1-0- 51 1-0-7 51 1-05-0 51 1-077-9 51 1-0-1 51 No. of Contacts A B 1 1 1 1 0 0 50 1.0 1.0 1.0.0.0.0.0.0 50.0 1.0 1.0 1.0.0.0.0.0.0 Note 1 : Please order the product per 0 pcs. Note : Diameter of or more contacts is Ø0.95±0.0. Kink Positions RoHS 1 or alternately alternately or alternately alternately or alternately alternately or 5 alternately 5 alternately 5 or alternately alternately or 7 alternately 7 alternately 7 or alternately alternately 11 alternately 1 or 1 alternately ±0.05 B±0.1 ±0.05 Ø0. +0.1 _0 ±0.05 B±0.1 ±0.05 Note Ø0.9±0.0 C1
A A Series mm Pitch Miniature Connector AB Straight Type AB-0PA-DSA(51) AB-0PA-DSA(51) AB-0PA-DSA(51) AB-05PA-DSA(51) AB-0PA-DSA(51) AB-07PA-DSA(51) AB-0PA-DSA(51) AB-09PA-DSA(51) AB-PA-DSA(51) AB-1PA-DSA(51) AB-1PA-DSA(51) AB-1PA-DSA(51) AB-15PA-DSA(51) AB-1PA-DSA(51) -001-51 -00-0 51-00- 51-00- 51-005-9 51-00-1 51-007- 51-00-7 51-009-0 51-011-1 51-01- 51-01-7 51-01-0 51-015- 51 Note : Please order the product per 0 pcs. AB Right Angle Type No. of Contacts A B RoHS 5 7 1.0 1.0 1.0 9 1.0 1.0 1 1 1 15 1.0.0.0 1.0.0.0.0 B±0.1 ±0.05 Ø0. +0.1 0 AB-0PA-DS(51) AB-0PA-DS(51) AB-0PA-DS(51) AB-05PA-DS(51) AB-0PA-DS(51) AB-07PA-DS(51) AB-0PA-DS(51) AB-09PA-DS(51) AB-PA-DS(51) AB-11PA-DS(51) AB-1PA-DS(51) AB-1PA-DS(51) AB-1PA-DS(51) AB-15PA-DS(51) AB-1PA-DS(51) -051-1 51-05- 51-05-7 51-05-0 51-055- 51-05-5 51-057- 51-05-0 51-059- 51-00- 51-01-5 51-0- 51-0-0 51-0- 51-05- 51 No. of Contacts A B 5 7 9 11 1 1 1 15 1 1.0 1.0 1.0.0.0.0.0 1.0 1.0 1.0.0.0.0 Note 1 : Please order the product per 0 pcs. Note : Dinmeter is 0.95±0.0 for 1pos, or more. Kink Positions RoHS 1 or alternately alternately or alternately alternately or alternately alternately or 5 alternately 5 alternately 5 or alternately alternately or 7 alternately 7 alternately 7 or alternately alternately B±0.1 ±0.05 Note Ø0.9±0.0 C1
A A Series mm Pitch Miniature Connector Pin Header AC-0P-DSA(0) 1-001-0 0 AC-0P-DSA(0) 1-00- 0 AC-0P-DSA(0) 1-00- 0 AC-0P-DSA(0) 1-00-9 0 AC-P-DSA(0) 1-005-1 0 AC-1P-DSA(0) 1-00- 0 AC-1P-DSA(0) 1-007-7 0 AC-1P-DSA(0) 1-00-0 0 AC-1P-DSA(0) 1-009- 0 AC-0P-DSA(0) 1-0-1 0 AC-P-DSA(0) 1-011- 0 AC-P-DSA(0) 1-01-7 0 AC-P-DSA(0) 1-01-0 0 AC-P-DSA(0) 1-01- 0 AC-P-DSA(0) 1-015-5 0 AC-P-DSA(0) 1-0-0 0 AC-P-DSA(0) 1-05-9 0 AC-50P-DSA(0) 1-0-7 0 Note : Please order the product per 0 pcs. Unit : mm No. of Contacts A B RoHS ---- 1 1 1.0 1 1.0 1.0 1 1.0 1.0 0 1.0.0.0.0.0.0.0.0.0.0.0.0 50 50.0.0 C15
A A Series mm Pitch Miniature Connector Receptacle A Right Angle Type A-DA-DS(71) 1-0711-9 71 A-50DA-DS(71) 1-071-7 71 Note : Please order the product per 0 pcs. Unit : mm A B RoHS 50 C1
A A Series mm Pitch Miniature Connector Receptacle KAC Type AC-0DA-DSA(71) AC-0DA-DSC(71) AC-0DA-DSA(71) AC-0DA-DSC(71) AC-0DA-DSA(71) AC-0DA-DSC(71) AC-DA-DSA(71) AC-DA-DSC(71) AC-1DA-DSA(71) AC-1DA-DSC(71) AC-1DA-DSA(71) AC-1DA-DSC(71) AC-1DA-DSA(71) AC-1DA-DSC(71) AC-1DA-DSA(71) AC-1DA-DSC(71) No. of Contacts A B 1-0501- 71 1-051-7 71 1-050-9 71 1-05-0 71 1-050-1 71 1-05- 71 1-050- 71 1-05-5 71 1-0505-7 71 1-055- 71 1-050-0 71 1-05-0 71 1-0507- 71 1-057- 71 1-050-5 71 1-05- 71 1 1 1 1 1.0 1.0 1.0 1.0 1.0 C.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 RoHS AC-0DA-DSA(71) AC-0DA-DSC(71) AC-DA-DSA(71) AC-DA-DSC(71) AC-DA-DSE(71) AC-DA-DSA(71) AC-DA-DSC(71) AC-DA-DSA(71) AC-DA-DSC(71) AC-DA-DSE(71) AC-50DA-DSA(71) AC-50DA-DSC(71) AC-50DA-DSE(71) 1-0509- 71 1-059-9 71 1-0511-0 71 1-051-0 71 1-0571-1 71 1-051-5 71 1-05- 71 1-0515-0 71 1-055-1 71 1-0575- 71 1-05-1 71 1-055- 71 1-05- 71 Unit : mm No. of Contacts A B C RoHS 0.00 1.0.00.00.0.0.00 1.7.00.0.00.00.0.00 1.7.00 50 50.0.0.00 1.7 C17
A A Series mm Pitch Miniature Connector AD Type AD-0DA-DSE(71) 1-0751- 71 AD-0DA-DSE(71) 1-075- 71 AD-0DA-DSE(71) 1-075-9 71 AD-DA-DSE(71) 1-075-1 71 AD-1DA-DSE(71) 1-0755- 71 AD-1DA-DSE(71) 1-075-7 71 AD-1DA-DSE(71) 1-0757-0 71 AD-1DA-DSE(71) 1-075- 71 AD-0DA-DSE(71) 1-0759-5 71 AD-DA-DSE(71) 1-07- 71 AD-DA-DSE(71) 1-07-0 71 Unit : mm No. of Contacts A B RoHS 1 1 1.0 1 1.0 1.0 1 1.0 1.0 0 1.0.0.0.0 C1
A A Series mm Pitch Miniature Connector Crimping Socket AB-*D-C AB-0D-C AB-0D-C AB-0D-C AB-D-C AB-1D-C AB-1D-C AB-1D-C AB-0D-C AB-D-C AB-D-C AB-D-C AB-*S-C 1-005- 1-00-0 1-007- 1-00- 1-009-9 1-0- 1-011-0 1-01- 1-01- 1-01-9 1-00-5 No. of Contacts A B RoHS 1 1 1 0 1.0 1.0.0.0 1.0 1.0.0.0.0 Note 1 : * indicates the number of contacts. Note : Please order the product per 0 pcs. Note : Use other contacts in combination. (Example : 50 contacts = contacts + contacts) AB-0S-C AB-0S-C AB-0S-C AB-05S-C AB-0S-C AB-0S-C AB-S-C AB-1S-C AB-15S-C AB-1S-C AB-1S-C -001- -00- -00-9 -00-1 -005- -00-7 -007-0 -00- -011-7 -0- -009-5 No. of Contacts A B RoHS 5 1 15 1 1 1.0.0.0.0 1.0 1.0.0.0 Note 1 : * indicates the number of contacts. Note : Please, order the product per 0 pcs. C19
A A Series mm Pitch Miniature Connector Crimping Contact SCC contact SCFC contact AB-0SCFC AB-0SCC AB-SCFC BCrimping Tool Manual crimping tool AB-TA0HC Note 1 : The plating specification is shown as follows: Automatic crimping machine CM-5C (Contact area) : Gold plating (Others) : Nickel plating Applicable Cable Type Quantity Crimping Tool RoHS 1-001-7 1-00-0 1-00- to 0 AWG to 0 AWG to AWG Reel Bag Reel 000 0 000 Automatic crimper CM-5C AP5-AB-0S AB-TA0HC Automatic crimper CM-5C AP5-AB-S Features Note : "0" is stamped on AB-0SCFC(SCC), and "" is stamped on AB-SCFC(SCC). Specification (CM-5 type) This tool is a new model to meet many user needs, and finely designed to enhance operativity and expand the application range for setup adjustment and various applicator installations. The easy to handle semi-automatic crimping machine can be used for crimping connection of various strip contacts. Power supply Gross weight Machining range Remarks Specification 0V AC, single phase 00W 75kg 000 to 000 contacts/hour Crimping of various contacts by replacing the applicator Type Item Applicable Contact Applicable Cable Manual Manual crimping tool AB-TA0HC 550-000-7 AB-0SCC to 0 AWG Automatic crimping machine CM-5C 901-0001-0 --- --- Automatic Applicator AP5-AB-0S AP5-AB-S 901-01- 901-017-5 AB-0SCFC AB-SCFC to 0 AWG to AWG C0
A A Series mm Pitch Miniature Connector BShort Pin Please, order the product per 00 pcs. A-SP(A) 1-0- B Polarizing Key A-GPIN(A) Material Housing PBT Contact Phosphor bronze Finish Black (UL9V-0) Selective gold plating RoHS Note : This product is provided in a set of pieces in conjunction with a runner. The unit for sale consists of sets, which are included in one pack. Material RoHS A-GPIN(A) 1-017- Poly acetal (white) C1
A A Series mm Pitch Miniature Connector Pin Header AA-0PA-SV(71) AA-0PA-SV(71) AA-0PA-SV(71) AA-0PA-SV(71) AA-0PA-SV(71) AA-0PA-SV(71) AA-PA-SV(71) AA-PA-SV(71) AA-1PA-SV(71) AA-1PA-SV(71) AA-1PA-SV(71) AA-1PA-SV(71) AA-1PA-SV(71) AA-1PA-SV(71) AA-0PA-SV(71) AA-0PA-SV(71) AA-PA-SV(71) AA-PA-SV(71) AA-PA-SV(71) AA-PA-SV(71) AA-PA-SV(71) AA-PA-SV(71) AA-PA-SV(71) AA-PA-SV(71) AA-50PA-SV(71) AA-50PA-SV(71) 1-00- 71 1-0-0 71 1-01-9 71 1-1- 71 1-0-1 71 1-- 71 1-0- 71 1--9 71 1-0-7 71 1--1 71 1-05-0 71 1-5- 71 1-0- 71 1--7 71 1-0- 71 1-- 71 1--0 71 1-50- 71 1-1-5 71 1-5-0 71 1-1-0 71 1-5-5 71 1-15- 71 1-55- 71 1-1- 71 1-5-0 71 (Note) (Note) PCB mounting pattern for pos. +0.1 Note : For automatic board placement, recommended boss dia. is 1. - 0. Unit : mm No. of Contacts A B C RoHS 1 1 1 0 50 1.0 1.0.0.0.0 50.0 1.0 1.0.0.0.0.0 1.0.0 0.0.0 C
A A Series mm Pitch Miniature Connector Receptacle AA-0DA-SV(71) AA-0DA-SV(71) AA-0DA-SV(71) AA-0DA-SV(71) AA-0DA-SV(71) AA-0DA-SV(71) AA-DA-SV(71) AA-DA-SV(71) AA-1DA-SV(71) AA-1DA-SV(71) AA-1DA-SV(71) AA-1DA-SV(71) AA-1DA-SV(71) AA-1DA-SV(71) AA-0DA-SV(71) AA-0DA-SV(71) AA-DA-SV(71) AA-DA-SV(71) AA-DA-SV(71) AA-DA-SV(71) AA-DA-SV(71) AA-DA-SV(71) 1-10-0 71 1-1-5 71 1-11- 71 1-111- 71 1-1- 71 1-11-0 71 1-1-9 71 1-11- 71 1-1-1 71 1-11- 71 1-15- 71 1-115-9 71 1-1-7 71 1-11-1 71 1-1- 71 1-11-7 71 1-11- 71 1-1150-9 71 1-111-0 71 1-115- 71 1-111-5 71 1-115-0 71 (Note) (Note) PCB mounting pattern for pos. Unit : mm No. of Contacts A B C RoHS 1 1 1 0 +0.1 Note : For automatic board placement, recommended boss dia. is 1. - 0. 1.0 1.0.0.0 1.0 1.0.0.0 1.0.0 C
A A Series mm Pitch Miniature Connector BRecommended Temperature Profile Temperature (ç) 0 0 0 00 0 150ç 00ç BFunctional Block Chart Receptacle and Socket Side A (A)-*DA-SV Straight SMT Type A (A)-*DA-DSA(DSC, DSE) Straight Through hole Type MAX50ç 90 to sec. MAX 0 sec. Preheating(150 to 00ç) Soldering (0ç min) 0ç Time (sec.) HRS test conditions Test boardglass epoxy 5mm 0mm 1.mm thick Solder method : Reflow Solder composition : Paste, 9.5%Sn/%Ag/0.5%Cu Metal mask : 0.mm thick Reflow cycles : cycles The temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. Pin Header Side A (A)-*PA-SV Straight SMT Type AC-*P-DSA Straight Through hole (low profile) Type AB-*D-C Cable crimping type AB-*PA-DSA Straight Through hole Type AB-*PA-DS Right Angle Through hole Type C
Powered by TCPDF (www.tcpdf.org) A A Series mm Pitch Miniature Connector BApplication Pattern (A series) A(A)-*DA-SV AC-*DA-DSA AB-*D-C A(A)-*PA-SV AC-*DA-DSA AC-*P-DSA A(A)-*DA-SV AB-*PA-DSA A(A)-*PA-SV AB-*D-C AC-*P-DSA AC-*DA-DSA AB-*PA-DSA A(A)-*PA-SV A(A)-*DA-SV AC-*P-DSA AB-*D-C AB-*PA-DSA A(A)-*DA-SV AC-*DA-DSA AB-*D-C AB-*PA-DS AB-*PA-DS AB-*PA-DS Note : When the connector is mounted on the board surface, the mounting height is a size designed in single connector. Solder paste used for installation will slightly change according to solder thickness. C5