velocity kiosk 02 V-K-02 Dress up and add wow to your space with state-of-the-art multimedia kiosks. features and benefits: - Custom appearance - Easy to assemble - Bases available in four finishes - Aluminum construction: vertical extrusions 50 mm x 50 mm - Wings are double sided - Installation tool included dimensions: Hardware Assembled unit: 47.25 (w) x 96.85 (h) x 23.25 (d) approx. 1200mm(w) x 2460mm(h) x 609.6mm(d) Shipping Shipping dimensions - ships in one case WMC12x6 case: 52 (l) x 30 (w) x 15 (h) 1320.8mm(l) x 762mm(w) x 381mm(h) Approximate shipping weight: 130 lbs / 59 kgs - Hardware Kit includes: 1 WMC-12X6 case, blank rigid counter infills, blank rigid wings and monitor mount - Graphic Kit includes: custom printed canopy graphic, counter infill and wings - Easy step-by-step instructions - Lifetime hardware warranty against manufacturer defects Graphic Top wing graphic: Total Visible Area: 15 w x 47.25 h 381mm(w) x 1200mm(h) Bottom wing graphic: Total Visible Area: 15 w x 39.3125 h 381mm(w) x 998mm(h) Pillowcase canopy graphic: Total Visible Area: 47.25 w x 23.25 d 1200mm(w) x 590.6mm(d) Refer to related graphic template for more information additional information: Graphic materials: Dye-sublimated fabric & UV prints on 6mm sintra Base and angled support feet color options: Monitor mount holds max weight 50 lbs / 22 kgs Rigid panels can be upgraded to frosted plex silver black mahogany natural 2014 Nimlok Display and Exhibit Solutions Worldwide For questions contact your local Nimlok distributor velocity
Parts Included Part label Qty Part code VE-16 x3 PH-600-S-S VE-34 x1 PS2-2-L-L x4 PM2R8-1200-A-A VE-45 x2 PH4-300 VE-46 x2 PH4-75-L V-K-B-01 x1 V-K-B-01 V-K-B-02 x1 V-K-B-02 V-K-L-01-L x2 V-K-L-01-L V-K-L-01-R x2 V-K-L-01-R Graphic A (canopy) x1 - Graphic B x1 - Graphic C x1 - Monitor mount x1 MM-MB VE-64 x1 WME-1200 VE-65 x1 WME-450 Standoff x4 PANEL CLAMP Canopy x1 V-K-CAN-02 Joining bar x4 LN100 T-Handle x1 T-HANDLE 1.
Step 1. Place V-K-L-01s into slots on the V-K-B-01/02 bases using detail below. Lock holes should face inside. Step 2. Slide the s down between the V-K-L-01s and lock the panels using detail below. V-K-L-01-L V-K-L-01-R V-K-L-01-R V-K-L-01-L V-K-B-01 V-K-B-02 PANEL PANEL T HANDLE Slide the channel of the s over the lock panels and lock with t-handle 2.
Step 3. Insert VE-45 internal connectors into lower s. Attach joining bars to lower s. Slide upper s onto the joining bars and VE-45 internal connectors. Lock joining bars. Step 4. Attach VE-16s between uprights at specified heights using detail shown below. POST WITH STOP 1-2- WITH S T TOP ITH S T HANDLE T BOTTOM VE-16 TOP TOP HORIZONTAL BY USING T- HANDLE TOOL VE-45 VE-45 JOINING BAR Slide the JOINING BAR into the trac s of one. Then push the two s together. 1'-1 7/8" [352mm] 1'-2 7/8" [378mm] VE-16 VE-16 JOINING BAR 1'-4 5/8" [422mm] SET S RE After the s are pushed together tighten all four set screws on both sides to secure the JOINING BAR and s into place. 3.
Step 5. Attach monitor mount to s using detail below. Run cable through VE-64/VE-65 and snap into channel. MEDIUM MONITOR Step 6. Screw the PANEL CLAMP clockwise into the channel until it is tight. Loosen the THUMBSCREW, place rigid sintra panel graphic and tighten in place. VE-34 WIRE VE-64 MGMT 2 5/8" [67.1mm] GRAPHIC B WIRE VE-65 MGMT 3'-4 3/8" [1025.7mm] WITH S 6 1/8" [155.1mm] 5'-8 5/8" [1743mm] ITH S T HANDLE GRAPHIC C 3'-0 3/8" [923.4mm] HORIZONTAL BY USING T- HANDLE TOOL MEDIUM MONITOR MOUNT WITH S WITH S SQUARE HEAD BOLTS INTO CHANNEL 4.
Step 7. Assemble the canopy by connecting the pieces following the numbered labels. Clean the frame and place it on a clean surface. Carefully remove the graphic and place it around the bottom of the frame, slits on underside of graphic. Pull the cover carefully over the frame and close all zippers. When breaking system down, be sure to fold or roll the graphic neatly and place in bag. Step 8. Lock VE-46s to canopy through slits in graphic. Attach completed canopy by sliding the VE-46 into the vertical posts. GRAPHIC A 2 1 5 6 3 VE-46 S FACING UP VE-46 S FACING UP 4 5.
check out these related products: velocity kiosk 01 velocity kiosk 02 velocity kiosk 03 velocity kiosk 04 Redesign of this exhibit without approval by Nimlok may result in dangerous and unsafe structures. Nimlok disclaims any responsibility for redesigned exhibits it does not approve in writing. Parts and components such as panels and extrusions are manufactured to metric sizing. We continue to improve and modify our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications.