Datenblatt / Specifications ACR89 Handheld Smart Card Reader Technical Specifications idvation GmbH Otto-Hesse-Straße 19 / T5 Phone +49 6151 9926567 D-64293 Darmstadt Fax +49 6151 3689296 info@idvation.com www.idvation.com
Table of Contents ACR89 Technical Specifications 1. Introduction... 3 2. Features... 4 3. Supported Card Types... 5 3.1. MCU Cards... 5 3.2. Memory-based Smart Cards (Synchronous Interface)... 5 3.3. Contactless Cards... 5 4. Typical Applications... 6 5. Technical Specifications... 7
1. Introduction As smart card technology becomes widely accepted in the market, integration of different components such as keypad and fingerprint scanner becomes necessary. This allow for an optimization of security and offers convenience sought after in many applications. ACR89 is an electronic device designed primarily to operate under low energy consumption. It comes with a built-in keypad, LCD, rechargeable battery and large programmable memory features, which allow ACR89 to perform secure transaction between the user and the card both in PC-linked and stand-alone modes. ACR89 is a powerful tool that offers a low-power and high performance solution. It also supports Secure PIN Entry (SPE). We can securely input the sensitive data through the PIN pad of the device to the PC terminal. This successfully eliminates the possibility of a Virus/Trojan or USB Sniffer getting hold of the PIN, as PIN codes are never exposed to the vulnerable PC or workstation. Furthermore, ACR89 introduces user firmware upgrade via USB: users are allowed to upgrade the firmware, which can be easily loaded to the ACR89 platform through the USB. This capability makes ACR89 very accessible and ideal for many applications.
2. Features > 32-Bit RISC Processor running Embedded FreeRTOS > User Programmable by C Language > Dual Operation Modes (PC-Linked/Standalone) > 2 Full-Size Contact Card Slots > 3 SAM-Size Card Slots > Firmware Upgradeable by USB > Easy-to-Read, High Resolution Backlit LCD > Highly Durable Chemical Resistant Keypad > 4 LED Status Indicators > Monotone buzzer > Tamper Detection Switch to Protect Against Unauthorized Intrusion > Real-Time Clock (RTC) with Independent Backup Battery > Supports Secure PIN Entry (SPE) > Supports PPS (Protocol And Parameters Selection) with 115,200 344,086 Bps in Reading and Writing Smart Cards > Hand-held size and weight > (Optional) Contactless Version > (Optional) Fingerprint Version > (On Request) Detachable Printer Cradle > ISO 7816 > ISO 14443 > PC/SC > USB Full Speed > CE > FCC > EMV Level 1 > RoHS > Microsoft WHQL
3. Supported Card Types 3.1. MCU Cards The ACR89 operates with MCU cards that follow: > T=0 or T=1 protocol > ISO 7816 Compliant Class A, B, C (5V, 3V, 1.8V) 3.2. Memory-based Smart Cards (Synchronous Interface) The ACR89 supports the following memory cards: > Cards following the I2C bus protocol (free memory cards) such as: Atmel: AT24C01 / 02 / 04 / 08 / 16 > SLE4432/5542 intelligent 256 bytes EEPROM with write protect function: SLE4432, SLE5542 > SLE4418/5528 intelligent 1K bytes EEPROM with write-protect function: SLE4418, SLE5528 3.3. Contactless Cards The ACR89 supports the following memory cards: > ISO 14443 Compliant, Type A & B Standard, parts 1 to 4, > T=CL protocol > Mifare Classics > Felica Card
4. Typical Applications > Customer Loyalty > E-Purse/ E-Commerce > One-time password generator > Secure Home-banking > Computer System Logon > Healthcare application medical identification > E-government applications > Time and attendance applications > Computer /Network access control > Digital Signature & Identification > Online Gaming
5. Technical Specifications Processor 32-bit RISC processor Operating System Embedded FreeRTOS Device and User Programmable Memory Programmable Language C Complier Provided Yes RAM 20KB NOR Flash 512KB (default)/ 1MB (On Request) Serial Flash 448KB (User Programmable/for Multilingual Storage) EEPROM 256KB (default)/ 512KB (On Request) Temper protected memory... 240Byte (For Sensitive Data Storage with API provided) Power Operating voltage 3.7V Operation mode PC-Linked and Standalone PC-Linked mode automatically switch to USB bus power, always ON Standalone mode automatically switch Lithium rechargeable battery power, soft ON/OFF switch Standby Time 2 months Operation Time 20hours Power consumption TBC Backup battery... Independent Rechargeable backup battery for RTC Connectivity USB USB 1.1 Full Speed, 12 Mbps RS232... 3 lines RxD, TxD and GND (Vendor Cable on Request) Smart Card Interface Contact standard Standard. ISO-7816 Class A, B (5V, 3V), T=0 and T=1 Supply current max. 60mA Smart card read / write speed 1,743-250,000 bps (primary/secondary slot) CLK frequency TBC Card connector type Landing/ Contact (primary/secondary slot) Card insertion cycles TBC Short circuit protection +5V / GND on all pins Contact - SAM Card connector type Smart card read / write speed Contact 1,743-250,000 bps Contactless (Optional) Standard Protocol Smart card read / write speed Operating distance ISO-14443 A & B part 1-4, Felica Mifare Classics protocols, T=CL 106, 212, 424 kbps 40mm Operating Frequency... 13.56MHz Fingerprint Scanner Interface (Optional) Power consumption Active mode: 20mA @ 5V + 105mA @ 3.3V Active sensor size Array size Image resolution ESD tolerance Firmware Upgrade Interface Firmware Upgradeable Power Source Sleep mode: < 1mA @ 5V + 70μA @ 3.3V 12.8 x 18 mm 256 x 360 pixels 508 DPI +/- 15kV air discharge USB cable from USB (USB Power Adapter on Request) Lithium Rechargeable Battery
Human Interfaces Keypad LCD Display Buzzer LED Status indicators Tamper switch Detachable Printer Cradle Physical Specifications Dimensions Case Color Weight Operating Conditions 20 keys (4 Function keys, 4x4 Keypad) (1) Number keys 0 9 with character input support similar to mobile phone; (2) Direction keys Up, Down, Left, Right; (3) Clear and Enter keys; and (4) Function keys F1 F4 128 x 64 dot matrix black and white graphic LCD with backlighting Window size: 49mm x 29mm; Active area size: 46mm x 28mm Number of characters on LCD: user definable (Max: 21 characters x 8 rows) Monotone buzzer with software controlled ON/OFF 4 LEDs for indicating status internal anti-intrusion detection and protection (On Request) Device: 30.5.00mm (L) x 181.00mm (W) x 77.00mm (H) (TBC) Grey Device: 150g 190g (TBC) Temperature 0 C to 50 C Humidity 40% to 80%, non-condensing Certifcations/Compliances EMV Level 1, CE, FCC, RoHS Compliant, ISO-7816, ISO-14443, PC/SC Other Features Real Time Clock Device Driver Operating System Support Windows 2000, 2003, XP, Server 2003, Vista, Server 2008, 7, Windows CE, MAC and Linux