Type BR NEED Product Description The primary function of a circuit breaker is to protect the wire from overheating (referred to as an overload) and fault currents (referred to as short circuits). Circuit breakers replaced fuses because they can be reset. Features, Functions and Benefits Operated by toggle-type handle and multi-pole circuit breakers have an internal common trip mechanism. Handle position provides visual trip position. Type BR: 0 to 0 amperes -, 2- and 3-pole - and 2-pole /2 V 3-pole 2 V 0, 22 and 42 kaic (2 poles only) Type BR breakers carry listing for HCAR application. Meet UL 489, CSA, NEMA standards, Federal Spec Classification W-C 375 b/gen. -inch (25.4 mm) wide (per pole). ing System TABLE -9. CATALOG NUMBERING SYSTEM BR CS Type BR Poles = -Pole 2 = 2-Pole 3 = 3-Pole Amperes 0 = 0 = = 25 = 25 = 35 = 35 = 45 = 45 = 60 = 60 70 = 70 80 = 80 90 = 90 00 = 00 0 = 0 25 = 25 0 = 0 Packaging CS = Clamshell Note: For arc fault and ground fault breakers, please see applicable sections. EATON CORPORATION Cutler-Hammer Retail Solutions Book -877-932-9322 Copyright 05-5
Data Tables TABLE -0. TYPE BR BREAKERS, -INCH (25.4 MM) PER POLE /2, 0, 22 AND 42 kaic 0 25 35 45 Wire Size Range Cu/Al 60 C or 75 C -Pole /2 Requires One -Inch (25.4 mm) Space 2-Pole /2 Requires Two -Inch (25.4 mm) Spaces 0 per Shelf Carton 5 per Shelf Carton 0 kaic 22 kaic 0 kaic 22 kaic 42 kaic #4 4 BR0 BR BR BR25 BR #4 4 BR35 BR BR0 7866763609 7866763654 78667636208 7866763623 7866763627 7824378 786676362252 7866763626 BRH BRH BRH25 BRH BRH35 BRH BRH45 BRH0 78667637 78667637304 7866763739 7866763733 782437228 786676373258 782437235 7866763732 BR20 BR2 BR2 BR225 BR2 BR235 BR2 BR245 BR2 -pole, -inch (25.4 mm) per pole circuit breakers are available with high magnetic setting for switching large tungsten lamp loads. Add Suffix H to catalog number. Switching duty rated. For use as a branch circuit breaker in 0 and 600 ampere panels only. 786676362757 78667636280 786676362856 786676362900 786676362955 786676374354 7866763606 786676374453 786676365 BRH2 BRH2 BRH225 BRH2 BRH235 BRH2 BRH245 BRH2 786676373456 7866763730 786676373555 786676373609 78243729 786676373654 782437266 786676373708 55 #4 3 BR0 7866763626 BRH5 782437242 BR255 7824372 BRH255 782437273 60 70 80 90 00 0 25 0 #4 /0 BR60 BR70 #4 2/0 78667636235 7866763625 BRH60 BRH70 786676373357 786676373 BR260 BR270 BR280 BR290 BR200 BR20 BR225 BR20 78667636305 78667636 78667636374 7866763634 786676363259 786676384278 786676367059 78667609 BRH260 BRH270 BRH280 BRH290 BRH200 BRH20 BRH225 786676373753 786676373807 782437280 786676373852 786676373906 786676374248 78667637395 BRHH260 BRHH270 BRHH280 BRHH290 BRHH200 BRHH20 BRHH225 78667638260 786676382700 786676382809 786676382908 786676376952 7866760029 786676377003 Note: All Type BR -, 2- and 3-pole circuit breakers carry listing for HACR application. TABLE -. TYPE BR BREAKERS, -INCH (25.4 MM) PER POLE /2, 0, 22 AND 42 kaic CLAMSHELLS 60 70 80 90 00 0 25 35 0 Wire Size Range Cu/Al 60 C or 75 C -Pole /2 Requires One -Inch (25.4 mm) Space 2-Pole /2 Requires Two -Inch (25.4 mm) Spaces 6 per Shelf Carton 3 per Shelf Carton 0 kaic 22 kaic 0 kaic 22 kaic 42 kaic #4 4 BRCS BRCS BRCS BRCS #4 /0 BR0CS BR60CS BR70CS #4 /0 BR00CS #4 /0 7824752708 78247527 7824752722 78266370 78266387 78266394 782660 7826647 BR2CS BR2CS BR2CS BR2CS BR2CS BR260CS BR270CS BR280CS BR290CS BR200CS BR20CS BR225CS BR235CS BR20CS -pole, -inch (25.4 mm) per pole circuit breakers are available with high magnetic setting for switching large tungsten lamp loads. Add Suffix H to catalog number. Switching duty rated. Note: All Type BR -, 2- and 3-pole circuit breakers carry listing for HACR application. 78266486 7824752746 7824752753 7824752760 7824752777 7824752784 78266493 782669 7826656 78266523 782665 78266547 78266554 7826656-6 EATON CORPORATION Cutler-Hammer Retail Solutions Book -877-932-9322 Effective August 05
Data Tables TABLE -2. TYPE BR BREAKERS, -INCH (25.4 MM) PER POLE 2 VAC, 0,000 AND 22,000 kaic Ampere Rating 0 25 35 45 Wire Size Range Cu/Al 60 C or 75 C #4 4 BR30 BR3 BR3 BR325 BR3 #4 4 BR335 BR3 BR345 BR3 3-Pole 2 Requires Three -Inch (25.4 mm) Spaces 5 per Shelf Carton 0 kaic 22 kaic 78667609 786676367707 786676367752 786676000093 786676367806 78667600009 78667636785 7866760006 786676367905 BRH3 BRH3 BRH325 BRH3 BRH335 BRH3 BRH345 BRH3 7866763723 786676372558 786676002707 786676372602 78667600274 786676372657 78667600272 78667637270 55 #4 3 BR355 782437567 BRH355 786676002738 60 70 80 90 00 #4 /0 BR360 BR370 BR380 BR390 BR300 7866763679 78667636800 7824098 786676368056 786676368094 BRH360 BRH370 BRH380 BRH390 BRH300 786676372756 786676372800 786676002745 786676372855 786676372909 One pole, -inch (25.4 mm) per pole circuit breakers are available with high magnetic setting for switching large tungsten lamp loads. Add suffix H to catalog number. Note: All Type BR -, 2- and 3-pole circuit breakers carry listing for HACR application. EATON CORPORATION Cutler-Hammer Retail Solutions Book -877-932-9322 Copyright 05-7
Accessories TABLE -3. FIELD INSTALLATION KITS AND PARTS Description Handle Ties Handle tie bar for physically joining the handles of two adjacent -pole Type BR. (Metal Cylinder Pin Type) Handle tie bar for physically joining the handles of two adjacent -pole Type BR. (Metal Cylinder Pin Type w/ Clamshell) Handle tie bar for joining two independent outside poles of Types BQ and BQC Quadplex and outside poles of two Type BD Duplex. Handle tie bar for joining two independent outside poles of Types BQ and BQC Quadplex and outside poles of two Type BD Duplex (w/ Clamshell). Handle tie bar for joining two adjacent outside poles of Types BQ and BQC Quadplex and outside poles of two Type BD Duplex. Handle tie bar for joining two adjacent outside poles of Types BQ and BQC Quadplex and outside poles of two Type BD Duplex (w/ Clamshell). BHT 7866763757 0 BHTCS 782479307 THOW 7866760936 0 THOWCS 7824793435 THS 7866760943 0 THSCS 7824793442 Minimum Order Quantity Handle Lockoffs Padlockable device for locking the handle of -, 2- or 3-pole Type BR and -pole of a Type BD Duplex or one independent outside pole of a Type BQ or BQC Quadplex. (Escutcheon Mounted) or one independent outside pole of a Type BQ or BQC Quadplex. (Escutcheon Mounted w/ Clamshell) BRLW BRLWCS Handle Ties: Typically used to join two similar independent single-pole breakers to form a 2-pole noncommon trip breaker. Handle Lockoffs: Devices that use a padlock to lock the circuit breaker s handle in the ON or OFF position. Escutcheon Mounted: Device mounted semipermanently to the face of the circuit breaker and secured by the loadcenter deadfront. Handle Mounted: Device mounted directly to the handle by the use of a set screw. Screw Mounted: Device permanently mounted to the face of the circuit breaker by the use of a non-removable screw. 786676000499 782479338 Padlockable device for locking the handle of a -pole Type BR Circuit Breaker. (Handle Mounted) BRLW 786676376228 0 Padlockable device for locking the handle of a -pole Type BR Circuit Breaker. BRLWCS 782479345 (Handle Mounted w/ Clamshell) Padlockable device for locking the handle of a 2- and 3-pole Type BR Circuit Breaker. BRLW2 786676376259 0 (Handle Mounted) Padlockable device for locking the handle of a 2- and 3-pole Type BR Circuit Breaker. BRLW2CS 78247932 (Handle Mounted w/ Clamshell) Padlockable device for locking the handle of a -pole Type BD Duplex, BQ or BQC Quadplex BRDL 78667637629 0 Breaker. (Handle Mounted) Padlockable device for locking the handle of the two center poles and the two outer poles of a BRQLW 7866763763 0 2-pole Types BQ and BQC Quadplex. (Escutcheon Mounted) Padlockable device for locking the handle of main circuit breaker Types CC and CHH into the ON CCPL 782994 or OFF position. (Screw Mounted) Padlockable device for locking the handle of main breaker Types BW and BWH into the ON or OFF position. (Escutcheon Mounted) MCBPL 782999 0-8 EATON CORPORATION Cutler-Hammer Retail Solutions Book -877-932-9322 Effective August 05
Accessories TABLE -3. FIELD INSTALLATION KITS AND PARTS (CONTINUED) Description Handle Lockdogs Device used to secure handle in ON or OFF position for -, 2-, or 3-pole Type BR Circuit Breakers and -pole of Type BD Duplex and one independent outside pole of Type BQ or BQC Quadplex. (Escutcheon Mounted) Device used to secure handle in ON or OFF position for -pole Type BR. (Handle Mounted) Device used to secure handle in ON or OFF position for 2- and 3-pole Type BR. (Handle Mounted) Device used to secure handle in ON or OFF position for -pole Type GFCB Ground Fault Circuit Breakers. (Handle Mounted) Device used to secure handle in ON or OFF position for one independent outside pole of Types BQ and BQC Quadplex or -pole Type BD Duplex. (Handle Mounted) BHLW 786676000482 0 BHLW 786676375658 0 BHLW2 786676375689 0 BHGW 7824797358 0 HLW 7866763754 0 Minimum Order Quantity Hold-Down Kits Hold-down retainer kit for 3-pole Type BR in S300 and 300R Loadcenters only. Hold-down screw kit for 2-pole Type BR in single-phase MLO Loadcenters through 25 amperes. Hold-down screw kit for 2-pole Type BR in MLO Loadcenters 0 through 225 amperes (single-phase only). Hold-down screw kit for 2-pole Types BJ and BJH in MLO Loadcenters 25 through 225 amperes. Hold-down screw kit for 3-pole Types BJ and BJH in MLO Loadcenters 25 through 225 amperes. Mechanical Interlocks Types BR for 2-, 3- and 4-pole breakers Types BR for 2-, 3- and 4-pole breakers (w/ Clamshell) Sub-Feed Blocks 25 A 2-pole sub-feed block #6 2/0 wire size 25 A 2-pole sub-feed block #6 2/0 wire size (w/ clamshell) Surge Breaker Plug-on surge protector Plug-on surge protector (w/ clamshell) BRHDB 7866763762 BREQS25 786676449557 BRHDK25 7866764492 BJHDS 786676376709 BJHDS3P 786676376754 BRML BRMLCS BRSF25 BRSF25CS BRSURGE BRSURGECS Handle Lockdogs: Devices that are used to secure a circuit breaker s handle in the ON or OFF position. Handle Lockdogs are not padlockable devices. Escutcheon Mounted: Device mounted semipermanently to the face of the circuit breaker and secured by the loadcenter deadfront. Handle Mounted: Device mounted directly to the handle by the use of a set screw. Hold-Down Kits: Devices used to secure the circuit breaker to the loadcenter for back-feed main application. See NEC Article 384-6(g). 7824383926 782479369 78667600762 782479376 7866764493 78247534 0 EATON CORPORATION Cutler-Hammer Retail Solutions Book -877-932-9322 Copyright 05-9
Related Products DUPLEX AND INDEPENDENT TRIP QUADPLEX BREAKERS TABLE -4. CLASS CTL, -INCH (25.4 MM) PER POLE 0 kaic ALL CIRCUIT BREAKERS HAVE REJECTION TAB FEATURE Type BD Duplex (UL Type BRD) -Pole Requires One -Inch (25.4 mm) Space Type BQ Quadplex (UL Type BRD) 2-Pole and -Pole Requires Two -Inch (25.4 mm) Spaces Type BQ Quadplex (UL Type BRD) 2-Pole Requires Two -Inch (25.4 mm) Spaces 0 per Shelf Carton 5 per Shelf Carton 5 per Shelf Carton 0 kaic 0 kaic 0 kaic /2 /2 /2 /2 /2 Ampere Rating 0 0 25 25 BD00 BD BDCS BD BD BD BD BDCS BD BD2525 BD BD BD BD BD BD BD 78667600900 786676369053 78266462 78667636907 7866763692 7866763696 78667636925 78266479 7866763695 7866763693 7866763694 786676369459 7866763693 786676369534 786676369558 786676369602 786676004282 Wire Size Range Cu/Al 65 C or 75 C Outer Left -Pole #4 4 Center 2-Poles Outer Right -Pole All Type BD Duplex and BQ Quadplex circuit breakers carry listing for HACR applications. All and ampere single poles are switch-duty rated. BQ22 BQ22 BQ22 BQ22 BQ22 BQ22 BQ22 BQ22 Note: Type BD Duplex, BQ and BQC Quadplex (CTL) circuit breakers conform to Section 384- of the latest National Electrical. Install breaker only in panel positions that have notched bus stabs. 78667637353 786676378 7866763706 786676375 78667637605 786676376 78667637704 78667637759 Outer 2-Poles 25 Center 2-Poles 25 BQ22 BQ22 BQ22 BQ22 BQ22 BQ22 BQ22 BQ22 BQ22 BQ225225 BQ22 BQ22 BQ22 BQ22 BQ22 BQ22 786676370707 78667600438 7866760044 7866760044 786676004435 786676370752 786676370806 78667637085 786676370905 7866763709 7866763700 78667637056 7866763700 786676375 786676379 78667637254 Notched Bus Stab Unnotched Bus Stab Type BR or Type BD Duplex, (CTL), Type BQ and BQC Quadplex Type BR Notched Stab Non-CTL Non-Circuit Limiting CTL Circuit Limiting Feature Type BR Type BD Duplex Rejection Tab FIGURE -. CTL AND NON-CTL BREAKERS -0 EATON CORPORATION Cutler-Hammer Retail Solutions Book -877-932-9322 Effective August 05
Data Tables TABLE -. CLASS NON-CTL, -INCH (25.4 MM) PER POLE 0 kaic BREAKERS DO NOT HAVE REJECTION TAB FEATURE Type BR Duplex Type Brand BRD Quadplex /2 -Pole /2 2-Pole 2-Pole Requires One -Inch (25.4 mm) Space Requires Two -Inch (25.4 mm) Spaces Type BRD Quadplex center and Outer Poles Requires Two -Inch (25.4 mm) Spaces 0 per Shelf Carton 3 per Shelf Carton 3 per Shelf Carton 0 kaic 0 kaic 0 kaic /2 /2 /2 /2 /2 Ampere Rating BR BRCS BR BR BR BRCS BR 786676370059 782475279 78667637003 7866763702 786676370257 7824752807 786676370 Wire Size Range Cu/Al 65 C or 75 C #4 4 Outer 2-Poles Center 2-Poles BR4 BR4 BR4 BRD22 BRD22 BRD22 Non-CTL 0 kaic for replacement purposes only. For replacement in enclosures manufactured prior to 968 with unnotched stabs. Circuit breakers do not have rejection tab. Clamshell. 78667637207 7866763722 7866763726 78667637223 78667637225 7866763725 Outer 2-Poles Center 2-Poles BRDC22 BRDC22 BRDC22 BRDC22 78667637232 786676372329 786676372336 786676372343 EATON CORPORATION Cutler-Hammer Retail Solutions Book -877-932-9322 Copyright 05 -
Cross-Reference TABLE -6. CIRCUIT BREAKERS -Inch Breakers (25.4 mm) Cutler-Hammer BR Breakers Siemens GE Square D HOMELINE BR BR BR BR200 BR225 BR2 BR2 BR225 BR2 BR2 BR2 BR260 BR270 BR280 BR300 BR3 BR3 BR3 BR3 BR360 BR BR BD BD BD BQ22 BQ22 BD Q Q Q Q200 Q225 Q2 Q2 Q225 Q2 Q2 Q2 Q260 Q270 Q280 Q300 Q3 Q3 Q3 Q3 Q360 Q Q Q Q Q2 Q2 Q THQL THQL THQL THQL20 THQL225 THQL2 THQL2 THQL225 THQL2 THQL2 THQL20 THQL260 THQL270 THQL280 THQL3200 THQL3 THQL3 THQL3 THQL3 THQL360 TQ TQ2 HOM HOM HOM200 HOM225 HOM2 HOM2 HOM225 HOM2 HOM2 HOM2 HOM260 HOM270 HOMT HOMT HOMT Note: These products are by no means equivalent but functionally similar. This is a cross-reference tool not an interchangeability chart. -2 EATON CORPORATION Cutler-Hammer Retail Solutions Book -877-932-9322 Effective August 05