N2S and N2SC Series Control Stations
|
|
- Lawrence Perry
- 5 years ago
- Views:
Transcription
1 NEMA, 4X, 7BCD (Div. 2), 2 Applications: N2S and N2SC pushbutton stations, selector switches and pilot lights are suitable for use: In Class I, Groups B, C, D; Division 2 hazardous areas where flammable vapors or gases may be present due to accidental or abnormal operation In damp, wet, or corrosive locations Indoors or outdoors in Division 2 areas of petroleum refineries, chemical plants and other process industry facilities where similar hazards exist N2S and N2SC pushbutton stations and selector switches are used: In conjunction with magnetic starters or contactors for remote control of motors N2S and N2SC pilot lights are used: To visually indicate at a remote location that the desired function is being performed Optional maintained stop pushbutton(s) are used: As emergency or normal stop button(s) in motor control circuits for positive shutdown. Features: Pushbutton stations, pilot lights, and selector switch devices are factory sealed. External seals are not required. Enclosures are made of Krydon fiberglass-reinforced polyester material having excellent corrosion resistance and stability to heat and sunlight. Optional maintained stop feature operates by depressing the mushroom head pushbutton. Pushbutton must be manually pulled before start button can be actuated. Lockout is standard on selector switch devices. Factory installed dead end (N2S) or through feed (N2SC) hubs /2", /4", and " sizes. Indicating plates are available with a choice of 40 standard markings. Grounding plate included with each hub. Certifications and Compliances: NEC: Class I, Division 2, Groups B, C & D NEMA:, 4X, 7BCD (Division 2) and 2 UL Standard: 20 CSA Standard: C22.2 Nos. 4 & 0 Electrical Rating Ranges: Pushbutton stations and selector switches heavy duty 600 VAC maximum Pilot lights 20 to 600 VAC Options: The following special options are available from factory by adding suffix to : Description Suffix Padlock attachments for all pushbuttons. For "" stations, only "STOP" button provided with lockout (lockout standard with STOP)... S708 Three position selector switches with modified operation: Momentary contact clockwise operation, spring return to center, maintained contact counterclockwise operation... S64 Momentary contact counterclockwise operation, spring return to center, maintained contact clockwise operation... S65 Control station with maintained stop pushbutton (requires NCD type enclosure): One maintained stop pushbutton... MSR Two maintained stop pushbuttons... MSR2 Maintained stop pushbuttons are installed at bottom position(s) of control station unless otherwise specified. LED pilot lights in place of standard incandescent pilot lamps... Dimensions In Inches: Maintained Stop Pushbutton Use dimension "e" for control station with " hub or maintained stop pushbutton. Dimensions are approximate, not for construction purposes. N2S(C) Body Outside Dims. (NCS)* (NCD)* Mounting Dims. /2" & /4" " Style I w d e ml mw a b a b or 2 devices 7 /4 /6 4 /8 5 /8 6 /8 2 5 /6 /8 /6 /4 5 /6 or 4 devices /4 /6 4 /8 5 /8 0 7 /8 2 5 /6 /8 /6 /4 5 /6 *NCS box is supplied with units using /2" and /4" hubs. NCD box is supplied with units using " hubs or MSR option. NCD 4 device box used with " hubs or MSR option. LED US: CAN: Copyright 20 Eaton s Crouse-Hinds Business
2 NEMA, 4X, 7BCD (Div. 2), 2 Ordering Information - With Pilot Lights * Enclosure with Pilot Lights /2" No. Units Diagram Volts 2 4 Feed Ordering Information - With Selector Switches Switch Position Style 2 Two-Position, Two-Circuit Two-Position, Four-Circuit /4" " Feed Feed 20 N2S ➀ N2SC ➀ N2S2 ➀ N2SC2 ➀ N2S ➀ N2SC ➀ 240 N2S2 ➀ N2SC2 ➀ N2S22 ➀ N2SC22 ➀ N2S2 ➀ N2SC2 ➀ 480 N2S4 ➀ N2SC4 ➀ N2S24 ➀ N2SC24 ➀ N2S4 ➀ N2SC4 ➀ 600 N2S5 ➀ N2SC5 ➀ N2S25 ➀ N2SC25 ➀ N2S5 ➀ N2SC5 ➀ 20 N2S2 ➀ N2SC2 ➀ N2S22 ➀ N2SC22 ➀ N2S2 ➀ N2SC2 ➀ 240 N2S22 ➀ N2SC22 ➀ N2S222 ➀ N2SC222 ➀ N2S22 ➀ N2SC22 ➀ 480 N2S24 ➀ N2SC24 ➀ N2S224 ➀ N2SC224 ➀ N2S24 ➀ N2SC24 ➀ 600 N2S25 ➀ N2SC25 ➀ N2S225 ➀ N2SC225 ➀ N2S25 ➀ N2SC25 ➀ 20 N2S ➀ N2SC ➀ N2S2 ➀ N2SC2 ➀ N2S ➀ N2SC ➀ 240 N2S2 ➀ N2SC2 ➀ N2S22 ➀ N2SC22 ➀ N2S2 ➀ N2SC2 ➀ 480 N2S4 ➀ N2SC4 ➀ N2S24 ➀ N2SC24 ➀ N2S4 ➀ N2SC4 ➀ 600 N2S5 ➀ N2SC5 ➀ N2S25 ➀ N2SC25 ➀ N2S5 ➀ N2SC5 ➀ 20 N2S4 ➀ N2SC4 ➀ N2S24 ➀ N2SC24 ➀ N2S4 ➀ N2SC4 ➀ 240 N2S42 ➀ N2SC42 ➀ N2S242 ➀ N2SC242 ➀ N2S42 ➀ N2SC42 ➀ 480 N2S44 ➀ N2SC44 ➀ N2S244 ➀ N2SC244 ➀ N2S44 ➀ N2SC44 ➀ 600 N2S45 ➀ N2SC45 ➀ N2S245 ➀ N2SC245 ➀ N2S45 ➀ N2SC45 ➀ Unless Otherwise Specified (or ) (or ) Enclosure With Selector Switch Hub Size Feed /2 N2S2 ➁ N2SC2 ➁ /4 N2S22 ➁ N2SC22 ➁ N2S2 ➁ N2SC2 ➁ /2 N2S22 ➁ N2SC22 ➁ /4 N2S222 ➁ N2SC222 ➁ N2S22 ➁ N2SC22 ➁ Three-Position, Two-Circuit Three-Position, Four-Circuit Three-Position, Four-Circuit /2 N2S2 ➁ N2SC2 ➁ /4 N2S22 ➁ N2SC22 ➁ N2S2 ➁ N2SC2 ➁ /2 N2S24 ➁ N2SC24 ➁ /4 N2S224 ➁ N2SC224 ➁ N2S24 ➁ N2SC24 ➁ /2 N2S25 ➁ N2SC25 ➁ /4 N2S225 ➁ N2SC225 ➁ N2S25 ➁ N2SC25 ➁ ➀ lens color for each pilot light. As an example, N2S2 with one red and one green would be ordered as N2S2-J-J. Color Symbol Color Symbol Red J Clear J0 Green J Blue J Amber J6 ➁ If desired, markings on indicating plates may be added to catalog number. Select from the list of standard markings below: Pushbuttons: REVERSE Selector Switches Two-Position: Selector Switches Three-Position: OPEN STOP CLOSE RUN-JOG RUN-OFF-JOG ON UP HAND-AUTO HAND-OFF-AUTO OFF DOWN FOR-REV FOR-OFF-REV RUN IN FAST-SLOW FAST-OFF-SLOW JOG OUT OPEN-CLOSE -OFF-2 TRIP RAISE UP-DOWN OPEN-OFF-CLOSE RESET LOWER ON-OFF UP-OFF-DOWN TEST IN-OUT LIGHT ON RAISE-LOWER HAND AUTOMATIC EMERGENCY FORWARD Pilot lights are transformer type except those rated 20 volts. Lamp type is 20MB, 20 volts, watts. * LED pilot lights are available. Add suffix LED after last color symbol. See Options Sections for more information. Suffixes S64 or S65 may be used on these catalog numbers. See explanation in Options section. US: CAN: Copyright 20 Eaton s Crouse-Hinds Business 545
3 NEMA, 4X, 7BCD (Div. 2), 2 Ordering Information - With Pushbuttons Momentary Contact No. Units 2 Contact Symbol Unless Otherwise Specified (or ) (or ) 4 Enclosure with Pushbuttons Hub Feed Size /2 N2S0 ➁ N2SC0 ➁ /4 N2S20 ➁ N2SC20 ➁ N2S0 ➁ N2SC0 ➁ /2 N2S20 ➁ N2SC20 ➁ /4 N2S220 ➁ N2SC220 ➁ N2S20 ➁ N2SC20 ➁ /2 N2S0 ➁ N2SC0 ➁ /4 N2S20 ➁ N2SC20 ➁ N2S0 ➁ N2SC0 ➁ /2 N2S40 ➁ N2SC40 ➁ /4 N2S240 ➁ N2SC240 ➁ N2S40 ➁ N2SC40 ➁ Ordering Information - Combination Pilot Lights* Pushbuttons Diagram s Enclosure With Pushbuttons and Pilot Lights Hub Size Volts Feed Volts Feed /2 N2S24 ➀➁ N2SC24 ➀➁ N2S244 ➀➁ N2SC244 ➀➁ /4 20 N2S224 ➀➁ N2SC224 ➀➁ 480 N2S2244 ➀➁ N2SC2244 ➀➁ N2S24 ➀➁ N2SC24 ➀➁ N2S244 ➀➁ N2SC244 ➀➁ /2 N2S242 ➀➁ N2SC242 ➀➁ N2S245 ➀➁ N2SC245 ➀➁ /4 240 N2S2242 ➀➁ N2SC2242 ➀➁ 600 N2S2245 ➀➁ N2SC2245 ➀➁ N2S242 ➀➁ N2SC242 ➀➁ N2S245 ➀➁ N2SC245 ➀➁ /2 N2S42 ➀➁ N2SC42 ➀➁ N2S424 ➀➁ N2SC424 ➀➁ /4 20 N2S242 ➀➁ N2SC242 ➀➁ 480 N2S2424 ➀➁ N2SC2424 ➀➁ N2S42 ➀➁ N2SC42 ➀➁ N2S424 ➀➁ N2SC424 ➀➁ /2 N2S422 ➀➁ N2SC422 ➀➁ N2S425 ➀➁ N2SC425 ➀➁ /4 240 N2S2422 ➀➁ N2SC2422 ➀➁ 600 N2S2425 ➀➁ N2SC2425 ➀➁ N2S422 ➀➁ N2SC422 ➀➁ N2S425 ➀➁ N2SC425 ➀➁ /2 N2S4 ➀➁ N2SC4 ➀➁ N2S44 ➀➁ N2SC44 ➀➁ /4 20 N2S24 ➀➁ N2SC24 ➀➁ 480 N2S244 ➀➁ N2SC244 ➀➁ N2S4 ➀➁ N2SC4 ➀➁ N2S44 ➀➁ N2SC44 ➀➁ /2 N2S42 ➀➁ N2SC42 ➀➁ N2S45 ➀➁ N2SC45 ➀➁ /4 240 N2S242 ➀➁ N2SC242 ➀➁ 600 N2S245 ➀➁ N2SC245 ➀➁ N2S42 ➀➁ N2SC42 ➀➁ N2S45 ➀➁ N2SC45 ➀➁ /2 N2S442 ➀➁ N2SC442 ➀➁ N2S4424 ➀➁ N2SC4424 ➀➁ /4 20 N2S2442 ➀➁ N2SC2442 ➀➁ 480 N2S24424 ➀➁ N2SC24424 ➀➁ N2S442 ➀➁ N2SC442 ➀➁ N2S4424 ➀➁ N2SC4424 ➀➁ /2 N2S4422 ➀➁ N2SC4422 ➀➁ N2S4425 ➀➁ N2SC4425 ➀➁ /4 240 N2S24422 ➀➁ N2SC24422 ➀➁ 600 N2S24425 ➀➁ N2SC24425 ➀➁ N2S4422 ➀➁ N2SC4422 ➀➁ N2S4425 ➀➁ N2SC4425 ➀➁ ➀ See pages ➁ See pages Pilot lights are transformer type except those rated 20 volts. Lamp type is 20MB, 20 volts, watts US: CAN: Copyright 20 Eaton s Crouse-Hinds Business
4 NEMA, 4X, 7BCD (Div. 2), 2 Ordering Information - Combination Selector Switches Position No. Pilot Push Lights* buttons 2 s 2 2-Pos, 2-Cct 2 -Pos, 2-Cct Enclosure With Pilot Light, Pushbuttons and Selector Switch Hub Size Volts Feed Volts Feed /2 N2S452 ➀➁ N2SC452 ➀➁ N2S4524 ➀➁ N2SC4524 ➀➁ /4 20 N2S2452 ➀➁ N2SC2452 ➀➁ 480 N2S24524 ➀➁ N2SC24524 ➀➁ N2S452 ➀➁ N2SC452 ➀➁ N2S4524 ➀➁ N2SC4524 ➀➁ /2 N2S4522 ➀➁ N2SC4522 ➀➁ N2S4525 ➀➁ N2SC4525 ➀➁ /4 240 N2S24522 ➀➁ N2SC24522 ➀➁ 600 N2S24525 ➀➁ N2SC24525 ➀➁ N2S4522 ➀➁ N2SC4522 ➀➁ N2S4525 ➀➁ N2SC4525 ➀➁ /2 N2S452 ➀➁ N2SC452 ➀➁ N2S4524 ➀➁ N2SC4524 ➀➁ /4 20 N2S2452 ➀➁ N2SC2452 ➀➁ 480 N2S24524 ➀➁ N2SC24524 ➀➁ N2S452 ➀➁ N2SC452 ➀➁ N2S4524 ➀➁ N2SC4524 ➀➁ /2 N2S4522 ➀➁ N2SC4522 ➀➁ N2S4525 ➀➁ N2SC4525 ➀➁ /4 240 N2S24522 ➀➁ N2SC24522 ➀➁ 600 N2S24525 ➀➁ N2SC24525 ➀➁ N2S4522 ➀➁ N2SC4522 ➀➁ N2S4525 ➀➁ N2SC4525 ➀➁ ➀ lens color for each pilot light. As an example, N2S2 with one red and one green would be ordered as N2S2-J-J. Color Symbol Color Symbol Red J Clear J0 Green J Blue J Amber J6 ➁ If desired, markings on indicating plates may be added to catalog number. Select from the list of standard markings below: Pushbuttons: REVERSE Selector Switches Two-Position: Selector Switches Three-Position: OPEN STOP CLOSE RUN-JOG RUN-OFF-JOG ON UP HAND-AUTO HAND-OFF-AUTO OFF DOWN FOR-REV FOR-OFF-REV RUN IN FAST-SLOW FAST-OFF-SLOW JOG OUT OPEN-CLOSE -OFF-2 TRIP RAISE UP-DOWN OPEN-OFF-CLOSE RESET LOWER ON-OFF UP-OFF-DOWN TEST IN-OUT LIGHT ON RAISE-LOWER HAND AUTOMATIC EMERGENCY FORWARD Pilot lights are transformer type except those rated 20 volts. Lamp type is 20MB, 20 volts, watts. * LED pilot lights are available. Add suffix LED after last color symbol. See Options Sections for more information. Suffixes S64 or S65 may be used on these catalog numbers. See explanation in Options section. US: CAN: Copyright 20 Eaton s Crouse-Hinds Business 547
5 NEMA, 4X, 7BCD (Div. 2), 2 Ordering Information - Custom-Built, Factory Assembled To order your custom-built factory assembled control station, select the enclosure required and add the desired devices from listings below. Custom-built factory assembled control stations may thus be ordered as follows: Requirements: -device control station on Krydon material enclosure with /4" through feed hubs, with pilot light with green jewel, rated at 20V; three position, two circuit selector switch marked HAND-OFF-AUTO; and green single circuit pushbutton marked. ORDER: NCDC2FA N2P0-J N2SW-HAND-OFF-AUTO N2PSG- Pilot light jewel symbol, pushbutton and selector switch plate markings are selected from footnote tables. Suffix FA indicates factory assembled. Note that order of assembly of control stations should be listed in desired mounting order, reading from top to bottom of enclosure. Enclosures (NCD or NCDC enclosures must be used with MSR or MSR2) No. of Devices Without Hub /2" Hub /2" Hub /4" Hub /4" Hub " Hub " NCD0 NCD NCDC NCD2 NCDC2 NCD NCDC 2 NCD02 NCD2 NCDC2 NCD22 NCDC22 NCD2 NCDC2 NCD0 NCD NCDC NCD2 NCDC2 NCD NCDC 4 NCD04 NCD4 NCDC4 NCD24 NCDC24 NCD4 NCDC4 No. of Devices Without Hub ( /4") Hub ( /4") Hub ( /2") Hub ( /2") NCS0 NCS2 NCSC2 NCS NCSC 2 NCS02 NCS22 NCSC22 NCS2 NCSC2 NCS0 NCS2 NCSC2 NCS NCSC 4 NCS04 NCS24 NCSC24 NCS4 NCSC4 Pilot Lights * Transformer Type Volts 20 N2PL0 ➀ 240 N2PL20 ➀ 480 N2PL40 ➀ 600 N2PL50 ➀ Pilot lights to be used in N2SU Series: Red N2PLU0 J LED Green N2PLU0 J LED Amber N2PLU0 J6 LED Clear N2PLU0 J0 LED Blue N2PLU0 J LED ➀ lens color for each pilot light using symbols below. Color Symbol Color Symbol Red J Clear J0 Green J Blue J Amber J6 Pilot lights are transformer type except those rated 20 volts. Lamp type is 20MB, 20 volts, watts. * LED pilot lights are available. Add suffix LED after last color symbol. See Options Sections for more information US: CAN: Copyright 20 Eaton s Crouse-Hinds Business
6 Pushbutton Stations Momentary Contact Color of Operator Circuit 2 Circuit Contact Symbol Universal Contact Symbol Universal NEMA, 4X, 7BCD (Div. 2), 2 Closure Plug Natural N2PS 2 N2PS2 2 Red N2PSR 2 N2PS2R 2 Green N2PSG 2 N2PS2G 2 Description Closure Plug NP2 Pushbutton Stations Maintained Contact Color of Operator Red Mushroom Head Circuit Contact Symbol Universal N2PM S 2 Selector Switches Style Position Position 2 Position Two Position Two Circuit N2SW2 2 Two Position Four Circuit N2SW222 2 Three Position Two Circuit N2SW 2 Three Position Four Circuit N2SW22 2 Three Position Four Circuit N2SW If desired, markings on indicating plates may be added to catalog number. Select from the list of standard markings below: Pushbuttons: REVERSE Selector Switches Selector Switches OPEN Two-Positions: Three-Position: STOP CLOSE RUN-JOG RUN-OFF-JOG ON UP HAND-AUTO HAND-OFF-AUTO OFF DOWN FOR-REV FOR-OFF-REV RUN IN FAST-SLOW FAST-OFF-SLOW JOG OUT OPEN-CLOSE -OFF-2 TRIP RAISE UP-DOWN OPEN-OFF-CLOSE RESET LOWER ON-OFF UP-OFF-DOWN TEST IN-OUT LIGHT ON RAISE-LOWER HAND AUTOMATIC EMERGENCY FORWARD Suffixes S64 or S65 may be used on these catalog numbers. See explanation in Options section. US: CAN: Copyright 205 Eaton s Crouse-Hinds Business
7 Dimensions In Inches: NEMA, 4X, 7BCD (Div. 2), 2 N2S For /2" and /4" hub sizes (for " hub and/or MSR option, see page 544). Mounting Outside Dimensions Dimensions NCS(C) Body Style l w d ml mw device 7 /4 /6 4 /8 6 /8 2 5 /6 2 devices 7 /4 /6 4 /8 6 /8 2 5 /6 devices 9 /2 /6 4 /8 8 5 /8 2 5 /6 4 devices /4 /6 4 /8 0 7 /8 2 5 / US: CAN: Copyright 20 Eaton s Crouse-Hinds Business
DS185 1G FS Box Switch Cover. Features. Description. Manufacturer Information EATON CROUSE-HINDS SERIES GTIN
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 DS185 1G FS Box Switch Cover Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category
More informationEJB Junction Boxes Dimensions Pg. 132
6F EJB Junction Boxes Dimensions Pg. 132 Application: EJB junction boxes are used in threaded rigid conduit systems in hazardous areas: As a junction or pull box To provide enclosures for splices and branch
More informationJanuary 2001 Vol. 2, Ref. No. [0880] 10250T/E34 Series, Assembled Devices Momentary Pushbutton Units
47 2in Cutler-Hammer Pushbuttons and Indicating Lights 30.5 mm Class I Division 2 Watertight/Oiltight Vol. 2, Ref. No. [0880] / Series, Assembled Devices Momentary Pushbutton Units Flush Button 706B Extended
More informationSeries Panel Mounted Control Devices
E_Master2012.qxd:NEW_E_Master_temp.qxd 1/27/12 4:28 PM Page 1 Series Features: Suitable for hazardous and corrosive locations. Installation is easy and precise. Devices fit into a standard 30.5mm, 1.2"
More informationPush Button & Selector Switch Components. Operator Protective Boots EXPLOSIONPROOF AUXILIARY DEVICES EXPLOSIONPRROOF AUXILIARY DEVICES
Push Button & Selector Switch Components XMB XHDPL Operator locking caps and actuator devices can be adapted to existing explosion proof operators. Simple installation requires removal of top cap and threading
More information37.3. Pushbuttons and Indicating Lights. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents. Product Description
.3 Pushbuttons and Indicating Lights Pushbutton Control Stations Contents Description Page Features.............................. V7-T-15 Product Selection M22 Assembled Control Stations........ V7-T-16
More informationELECTRICAL CONTROL SYSTEM COMPONENTS
Module - 2 ELECTRICAL CONTROL SYSTEM COMPONENTS Lecture - 1 MECHANICAL SWITCHES Shameer A Koya EEET 221 : Electrical Control Systems. Module 2 - Objectives State the functions of control system components
More informationApplications: Page 60. Chemical manufacturing / processing plants Paint manufacturing facilities Bulk truck terminals Refineries
CSA - Class I Div. 1 - Groups C & D CSA - Class I Div. 2 - Groups A, B, C & D CSA - Class II Div. 1 & 2 - Groups E, F & G CSA - Class III UL 844 - Class I Div. 1 - Groups C & D UL 844 - Class I Div. 2
More information800 T A 1 A. f (cont'd) d (cont'd) f (cont'd) Momentary Contact Push Button Devices, Non-Illuminated. Rockwell Automation Publication 800-TD009A-EN-P
NEM Push Button Specifications 800T/H 30.5 mm Push Buttons Momentary Contact Push Button Devices, Non-Illuminated Flush Head Unit Cat. No. 800T-1 Extended Head Unit Cat. No. 800T-B6 Booted Unit Cat. No.
More informationSwitch rated plugs and receptacles with NEMA 4X protection
DSN Features and Ratings p. 22 DSN20 p. 23 DSN30 p. 25 DSN60 p. 27 Spare parts p. 29 Dimensions p. 31 21 Switch rated plugs and receptacles with NEMA 4X protection DSN Series products are switch and hp
More informationContender LED Luminaires Enclosed and Gasketed Fixtures
Class I, Division, Groups A,B,C,D Class I, Zone, Group IIC Class II, Division, Groups E,F,G Zone and, Group IIIC Class II, Division, Groups F,G Type R, 4, 4X Applications Enclosed and gasketed fixtures
More informationEnclosed Non-Reversing Combination Controller, AC Operation - Type 1/12K/IP66 ➏➐ (KS7-C0C4R) Discount Schedule F-1
KWIKstarter/CX7 CX7 Non-Reversing Combination Controller, AC Enclosed Non-Reversing Combination Controller, AC Operation - Type 1/12K/IP66 ➏➐ ~ ~ ~ ~ 0.10 0.16 2.1 1 CX7-9-10- -AS0.16A-A10-PG 551 Q4 ~
More informationEnclosed Non-Reversing Combination Controller, AC Operation - Type 1/12K/IP66 ➏➐. Non-Metallic Type 1/12K/IP66 Enclosure (KS7-C0C4R)
KWIKstarter/CX7 CX7 Non-Reversing Combination Controller, AC Enclosed Non-Reversing Combination Controller, AC Operation - Type 1/12K/IP66 ➏➐ Catalog Number ➍➏➑➒ ~ ~ ~ ~ 0.10 0.16 2.1 1 CX7-9-10- -AS0.16A-A10-PG
More informationSpecial Purpose Plugs and Receptacles
Special Purpose Plugs and Receptacles Application Applications: Special purpose plugs and receptacles listed in this section are for use in nonhazardous areas, where environmental or application considerations
More information4XDOLW\ &RPPLWPHQW.
www.tier1automation.com Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced
More informationWastewater Solutions. Featuring Meltric s DECONTACTOR TM Series Switch-Rated Plugs, Receptacles and Electrical Connectors. meltric.
Wastewater Solutions Featuring Meltric s DECONTACTOR TM Series Switch-Rated Plugs, Receptacles and Electrical Connectors meltric.com Meltric DECONTACTOR TM Series Plugs & Receptacles Decontactors are a
More informationExplosionproof & Dust-Tight Push Buttons
AND DUST-TIGHT PUSH BUTTONS PUSH BUTTONS Explosionproof & Dust-Tight Push Buttons NEMA 3, 4, 7 & 9 All operators are die cast aluminum alloy. The barrels are all ¾ NPSM thread. Maximum installation thickness
More informationControls Enclosed Non-Combination Starters - PESW Series
NEMA 4/4X Non Metallic Enclosure Product Features WEG offers non-reversing and non-combination NEMA-4X magnetic starter up to 75HP at 460V. Featuring components that meet IEC design standards and UL horsepower
More information2-Position Cylinder Lock Operator Cat. No. 800T-H33A 800 T H31 A. Protection Rating Description T Metal, Type 4/13
2-Position Selector Switch Devices, Non-Illuminated (Bul. 800T only) 2-Position Cylinder Lock Operator Cat. No. 800T-H33A 800 T H31 A a b c d e a Protection Rating T Metal, Type 4/13 Blank C H31 H32 H33
More informationSwitch-Rated Electrical
Switch-Rated Electrical Plugs, Receptacles & Connectors for the Power Generation Industry meltric.com Benefit from Meltric s Decontactor TM Series Switch-Rated Plugs, Receptacles, and Electrical Connectors
More informationLetter Color. Background Color. Field Color. Split Field Color. Standard Plastic, NEMA 1 Only. White Black Black E22NSP77 E22NSP90 E22NSP11 E22NSP12
March 2008 E22 and EM22 Series, Legend Plates with Markings -79 Options Legend Plates Engraved Legend Plates with Markings 1/8" High Character Size legend plates installed with aluminum legend plates have
More informationTECHNICAL BROCHURE BCPNEMAST R0. NEMA Rated Three-Phase Starters BY EATON
TECHNICAL BROCHURE BCPNEMAST R0 NEMA Rated Three-Phase Starters BY EATON STANDARD FEATURES Series ECN - NEMA Rated Three-Phase Starters Adjustable Electronic Overloads C440 Series - Adjustable Class, Bi-metallic,
More informationLANDSCAPE TRANSFORMERS
LANDSCAPE TRANSFORMERS Precision Power. Perfect Light. Remote Transformers Linear Fluorescents Sign Ballasts Electronic HID LED Drivers Landscape Transformers Hatch Landscape Transformers have been designed
More informationVersaPro Non-Metallic Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 2 - Groups F & G CSA - Class III CSA - Type 3 R Enclosed & Gasketed Features: Non-Metallic Fluorescent
More informationE30 Series, Operators & Indicating Lights
March 2008 E30 Series, Operators & Indicating Lights -103 Square Multifunction Operators and Indicating Lights (Continued) Table -145. Single Button Operator with Indicating Light/without Button or Order
More informationProduct Description. Selector Switches
-100 F SS Vol. 2, Ref. No. [0770] Contents Description Page Product Description......... -100 Features................... -100 Standards and Certifications............. -100 Technical Data..............
More informationControl Buttons / Switches for Panel Mounting Series 8003
www.stahl.de > Different actuators pushbutton mushroom pushbutton mushroom stay-put button mushroom stay-put button with key lock key-operated button key-operated switch selector switch > 2 contact elements
More informationPush buttons and selectors
Accessories and spare parts 8 LM2T A130 8 LM2T A140 8 LM2T A185 8 LM2T AL... Order code Description Qty per Wt 8 LM2T A12❶ Coloured diffuser for 10 0.001 double touch buttons 8 LM2T A130 Threaded plug
More informationChamp VMV LED Series Luminaires Improve safety, reliability and energy efficiency
The Champ VMV LED Family VMV LED Series are designed to provide full-spectrum, crisp, white light with custom IES Type I, III and V distribution. Five versions of the Champ VMV LED are available, providing
More informationControls. Reduced Power Cost Extended Heater Life Less Maintenance Improved Process Products Stable Process Temperature. 4232/4233 Features
40 Series SCR-Zero Crossover Control 00 to 00 Amps Louvered, Fan Cooled Enclosures Main Disconnect Switch with Shunt Trip 08-600 Volt Control Power Transformer 4 NEMA or NEMA Leg, Phase MaxPac II DOT Fired
More informationMSR Level Control Relay Module Operating Instructions for Level Control Relay Module Model: MSR
Operating Instructions for Level Control Relay Module Model: MSR MSR Operation Instructions Rev. Apr 07 Page 1/8 1. Note Please read and take note of these operating instructions before unpacking and commissioning.
More informationCrane Control Class 9004
Catalog 17 CONTENTS Description.....................................................Page Pricing and Ordering Information...................................... 140 Dimensions and Weights............................................
More informationMOTION LABORATORIES CHAIN HOIST MOTOR CONTROL SYSTEMS MANUAL. Basic Outline of Operation for Distro Controllers
MOTION LABORATORIES CHAIN HOIST MOTOR CONTROL SYSTEMS MANUAL Forward The main body of text in this manual concerns four through eight channel portable chain hoist motor control systems with 208-230 VAC
More informationAllPro Hazardous/Corrosive Area Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 1 & 2 - Groups E, F & G CSA - 4X UL 844 - Class I Div. 2 - Groups A, B, C, & D UL 4X UL - Outdoor
More informationSECTION ELECTRICAL CONTROL DEVICES
ELECTRICAL CONTROL DEVICES PART 1 GENERAL 01 02 03 04 05 SCOPE The Contractor shall furnish and install, where indicated on the drawings, equipment with electrical control devices installed as specified
More information1. Introduction. 2. Design. Safety and Emergency Stop Circuit Design Standard. Safety and Emergency Stop Circuit Design Standard.
Safety and Emergency Stop Circuit Design Standard The Safety and Emergency Stop Circuit Design Standard provide design criteria and specifications for safety and emergency stop circuits used in General
More informationPUSHBUTTONS. Easy Selection Guide CONTROL DEVICES. nhp-nz.com
PUSHBUTTONS Easy Selection Guide CONTROL DEVICES nhp-nz.com s Lens Legend Plates (optional) Contact Blocks & Coupling Plates (Plastic or Metal) Accessories & Enclosures page 3-4 page 5 page 6-7 page 8
More informationPlexPower Factory Sealed Panelboard Increased Safety
Applications The IEC PlexPower factory sealed panelboard provides indoor and outdoor protection and control of electrical circuits in hazardous environments such as: Petroleum plants Chemical plants Refineries
More informationEx-CELL Stainless Steel and Painted Steel Enclosures
Ex-CELL Stainless Steel and Eaton's Crouse-Hinds Ex-CELL Enclosures are manufactured to meet the most demanding industrial and hazardous area environmental applications. The Ex-CELL Series is a globally
More informationOVERLOAD RELAYS POWER & ACTUATION PROVEN. series
POWER & ACTUATION OVERLOAD RELAYS series Need reliable, accurate overload and phase-loss protection for your motors? c3controls Series Bimetallic Overload Relays provide unmatched protection and can be
More information22mm Non Illuminated Metal Operators
22mm 22mm Non Illuminated Metal Operators Altech Corp. can provide other push button and actuator options. If your requirement calls for a 22 mm operator which is not shown, please do not hesitate to call.
More information120 VAC 18x16x8 Inch Weatherproof Enclosure with Mounting Plate, Cooling Fans and Solid State Fan Controllers Model: NB FS
120 VAC 18x16x8 Inch Weatherproof Enclosure with Mounting Plate, Cooling Fans and Solid State Fan Controllers Model: NB181608-10FS Applications and Features Features: Molded Fiberglass Reinforced Polyester
More informationSECTION SOLID-STATE REDUCED VOLTAGE STARTERS
SECTION 26 29 13.16 PART 1 - GENERAL 1.1 THE REQUIREMENT A. General: The CONTRACTOR shall provide solid-state reduced voltage motor starters, complete and operable, in accordance with the Contract Documents.
More information1.2. Loadcenters and Circuit Breakers. Contents. Overview. Type BR Loadcenters and Circuit Breakers. Product Selection Guide.
.2 Overview Product Selection Guide BR Loadcenters Description Service Single-phase, three-wire, 20/240 Vac Short-Circuit Current Rating 0 kaic: All single- and three-phase loadcenters 70 225 A, 8 to 42
More information120 VAC 14x12x7 Inch Weatherproof Enclosure with Mounting Plate, Cooling Fan and Solid State Fan Controller Model: NB FS
120 VAC 14x12x7 Inch Weatherproof Enclosure with Mounting Plate, Cooling Fan and Solid State Fan Controller Model: NB141207-10FS Applications and Features Features: Molded Fiberglass Reinforced Polyester
More informationInstallation, Operation
Installation, Operation and RENEWAL PARTS IDENTIFICATION 4 (Supersedes PN400-2) MAY, 1986 Type RST and RSTO Unitary Electric Immersion Heaters RST PN400-3 161-049178-001 3 Schedule 40 Steel Pipe Immersed
More informationIndicator, round, raised, full face with plastic matt chrome bezel, 22.5 mm mounting, lamp block included. Yellow Green
22.5 mm 3.5 mm IP65 1 A 66 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales office. INDICATOR
More informationNPA Pendant Control Station
Tecno Elettrica Ravasi The NPA Pendant Station is a control device for all industrial machinery. It operates as an auxiliary controller of electrical motors through a power interface, such as a contactor
More information1. Summary. 2. Contacts. Safety Controls Guidelines. Table of Contents
The provide design criteria and specifications for safety circuit in compliance with ISO 13849-1 PL d Safety of machinery, used in General Mills manufacturing facilities. Table of Contents 1. Summary 2.
More information1.2. Loadcenters and Circuit Breakers. Contents. Overview. Type BR Loadcenters and Circuit Breakers. Product Selection Guide.
.2 Overview Product Selection Guide BR Loadcenters Description Service Single-phase, three-wire, 20/240 Vac Short-Circuit Current Rating 0 kaic: All single- and three-phase loadcenters 70 225A, 8 to 42
More informationPushbuttons and Indicating Lights. Protection Type IP66 NEMA 4X, 13
.5 Pushbuttons and Indicating Lights Product Description Eaton s M22 double pushbutton line is perfect for applications such as motor and pump starting, as well as anytime space is limited. In addition
More informationP Series PlexPower Distribution Panelboards Increased Safety
Applications The P Series PowerPlex panelboard provides indoor and outdoor protection and control of electrical circuits in hazardous environments such as: Petroleum plants Chemical plants Refineries Other
More informationApplications: Page 54. Waste treatment plants Marine loading terminals Pipeline pumping stations Solvent / cleaning areas
S - lass I Div. 1 - Groups & D S - lass I Div. 2 - Groups,, & D S - lass II Div. 1 & 2 - Groups E, F & G S - lass III UL 844 - lass I Div. 1 - Groups & D UL 844 - lass I Div. 2 - Groups,, & D UL 844 -
More informationWMS SUPPLEMENTARY PROTECTORS
WMS Supplementary Protectors Overview WMS SUPPLEMENTARY PROTECTORS Product Specification The WMS Supplementary Protector is a dual-rated product for both AC and DC supplies, in accordance with UL 1077
More informationPS-4100 POWER SUPPLY MANUAL
PS-4100 POWER SUPPLY MANUAL Manual Part Number 180-0573 December 7, 2006 TABLE OF CONTENTS TITLE PAGE Table of Contents... 2 List Of Figures... 3 1. Introduction... 4 1.0. General... 4 1.1. Features...
More information194E FA 32 E P11 P11 6
Bulletin E IEC Load Switches, A Product Selection/Catalog Number Explanation Bulletin E Enclosed Disconnect Load Switches with R Handles (with Defeater, suitable for padlocks) E-FA Painted Steel Enclosure
More information1510 MOTOR CONTROLLERS
SECTION 262913- MOTOR CONTROLLERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of contract, including general and supplementary conditions and Division 1 specification section,
More informationJunction Boxes & Enclosures JBEP and ECEP Series: Undrilled Fiberglass Reinforced Polyester Enclosures Increased Safety
CSPe Type Small Version CAe Type Non-Hinged Version CAe Type Hinged Versions Compliance Data: ATEX - IECEx: Zone 1 & 1 & ATEX II GD IECEx CE Ex e II T6 to T Ex td A1 T75 C to T95 C Ex ia IIC; Ex ib IIC
More informationSECTION WIRING DEVICES PART 1 - GENERAL. A. Drawings and Division 1 Specification Sections, apply to this Section.
SECTION 16140 WIRING DEVICES 1.01 RELATED DOCUMENTS PART 1 - GENERAL A. Drawings and Division 1 Specification Sections, apply to this Section. 1.02 SUMMARY A. This Section includes receptacles, connectors,
More informationPushbutton and selector switch series Quality touch!
Pushbutton and selector switch series Quality touch! For Info: sales@switchesunlimited.com www.switchesunlimited.com Phone: 00-1-07 Fax: 71-7-70 Pushbuttons and selector switches Ømm Quality touch! mm
More informationDUCT-O-WIRE. Enclosed Pendant Push Button Stations CAUTION
DUCT-O-WIRE Enclosed Pendant Push Button Stations Switches and Accessories Cables and Cable Assemblies has the most complete line of pendant stations in the industry. We offer a variety of pendants ranging
More informationPENDANT PUSHBUTTON STATIONS
SBP2 PENDANT PUSH STATIONS SBP2 PENDANT PUSH STATIONS THE LIGHTWEIGHT PENDANT STATION FOR HEAVYWEIGHT APPLICATIONS COMPLETE PENDANT STATIONS 2, 4, 6, 8, 10, or 12 button configurations 1, 2, or 3 speed
More information1.2. Loadcenters and Circuit Breakers. Contents. Overview. Type BR Loadcenters and Circuit Breakers. Product Selection Guide.
.2 Loadcenters and Circuit Breakers Overview Product Selection Guide BR Loadcenters Description Service Single-phase, three-wire, 20/240 Vac Short-Circuit Current Rating 0 kaic: All single- and three-phase
More informationProgram B3 318 Ø 22,5mm. Push Buttons 319 EMERGENCY STOP Buttons 320 Key Operated Rotary Switches 320
Push Buttons Index Page Program B3 318 Ø 22,5mm Push Buttons 319 EMERGENCY STOP Buttons 320 Key Operated Rotary Switches 320 Rotary Knobs and Swing Knobs 321 Illuminated Rotary Knobs and Swing Knobs 321
More informationPanelView Plus/VersaView CE Terminals and Display Modules
Installation Instructions PanelView Plus/VersaView CE Terminals and Display Modules (Catalog Numbers 2711P-xxxxxx, 6182H-xxxxxx) English Inside: Overview...2 For More Information...2 Modular Components...3
More information2.) Cabinet setup and preset data shall, as standard, be fully user programmable on a per cabinet or system wide basis.
A21 DIMMER CABINET SPECIFICATION. GENERAL. A.) Overview. 1.) The dimmer cabinets shall be fully digital, designed specifically for architectural and entertainment lighting applications, and shall consist
More informationEMERGENCY BATTERY SYSTEM INTRODUCTION
KILLARK H A Z LO C EMERGENCY BATTERY SYSTEM INTRODUCTION EBS Battery Unit Only Class I, Div. 1&2, Groups B,C,D Class I, Zone 1&2, Groups llb+h2, lla Class II, Div. 1&2, Groups EFG Class III Enclosure Type
More informationQCPort Cover Control Trouble Shooting Guide
QCPort Cover Control Trouble Shooting Guide Technical Document Feb. 2006 Page 1 of 14 QCPort Cover Control Description Door Defeater Address/Options Bucket Latch Breaker Actuator Hasp Lock Keypad Overlay
More informationLoad Disconnect Switches and Motor Switches
Load Disconnect Switches and Motor Switches 594 Load Disconnect Switches and Motor Switches Contents Load Disconnect Switches and Motor Switches Safety Switches made of Resin 10, 12/16, 16, 20, 25, 40,
More informationSeries F75 Fail-Safe Module Installation, Operation and Maintenance Instructions
WCAIM2029 (Part 16022) Series F75 Fail-Safe Module Installation, Operation and Maintenance Instructions CAUTION: Flowserve recommends that all products that must be stored prior to installation be stored
More informationSMARTSTART MOTOR STARTERS
SMARTSTART MOTOR STARTERS MCG WWW.MCG-USA.COM 1 AT A GLANCE Covers all line voltages from 200-600V AC, single or three phase Transformer supplies a 24V AC coil voltage, no matter the line voltage 12V AC/DC
More informationZC Series Zone Monitoring Controllers
ZC Series Zone Monitoring Controllers Installation Instructions MANUAL Reset Controllers Model Description Part Number ZC-1 1 Zone Controller 0421 ZC-2 2 Zone Controller 0422 ZC-3 3 Zone Controller 0423
More informationJuliet - PK. Joystick station. business partner. Features. Design. Materials. Industrial lifting. Construction lifting.
Juliet - PK Joystick station Juliet-PK joystick stations are control devices for all industrial machinery. They operate as auxiliary controllers of electrical motors through a power interface, such as
More informationProducts :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Miniature Hydraulic/Magnetic Circuit Breaker M-Series M-Series PDF elibrary The M-Series miniature hydraulic/magnetic circuit breakers
More informationM C. Ex d M-0... control, monitoring and signalling devices
Ex d M-0... control, monitoring and signalling devices M-0 M-0 series control, monitoring and signalling devices are installed as external accessories on Cortem 'Ex d' enclosures used in any industrial
More informationATX MRE Series 16 and 32 Amp Multiple Socket Outlets Stationary and Portable. Increased Safety
Applications Plugs and sockets are used with portable or stationary electrical equipment such as: Lighting systems Conveyors Heaters Motor generators Air conditioning equipment Compressors Pumps For use
More informationPush Buttons and Operator Interface New Product Catalog XAL Control Stations
Push Buttons and Operator Interface New Product Catalog XAL Control Stations CONTENTS Description.................................................... Page General Information................................................104
More informationMaximum Reliability & Excellent Value. Features. UL Listed Withstand & Close-On Ratings. Series 300 Power Transfer Switches
Series 300 Power Transfer Switches Maximum Reliability & Excellent Value With a Series 300 Transfer Switch, you get a product backed by ASCO Power Technologies, the industry leader responsible for virtually
More informationIPS INTELLIGENT PUMP STARTER
IPS INTELLIGENT PUMP STARTER The IPS Intelligent Pump Starter features SMARTSTART motor protection, integrated electronic pump protection overload, and power metering and data logging options. Ø & Ø, 0/60
More informationMercmaster LED Low Profile Luminaires Enclosed and Gasketed Fixtures
Class I, Division, Groups A,B,C,D Class I, Zone, Group IIC Class II, Division, Groups E,F,G Zone and, Group IIIC Class II, Division, Groups F,G Type R, 4, 4X /IP67 Zone and - II D II GD Zone and - Applications
More informationEx e Command, Control and Signalling Operators SERIES M-0603, M-0604, M-0605, M-0612
TECHNICAL DATA SHEET NEW PRODUCT Rev. 6-03/2013 Ex e Command, Control and Signalling Operators SERIES M-0603, M-0604, M-0605, M-0612 Ex de Contact blocks SERIES M-0530, M-0531 1 - New Product Technical
More informationPushbutton Switches, 16mm, Illuminated
Pushbutton Switches, 16mm, lluminated lluminated Pushbuttons are instrument-grade switches having snap-acting double break contacts, silver clad and gold plated to satisfy the requirements of logic level
More informationIndustrial Plugs & Receptacles
Industrial Connectivity CEAG Products Industrial Plugs & Receptacles Products & solutions For heavy duty applications Plug in with IEC 60309 Industrial plugs and receptacles for harsh environments Eaton's
More informationJULIET-PK. Joystick station
Joystick station JULIET-PK Handy and compact joystick station. Juliet PK is a user-friendly, ergonomic product, whose size and shape are the result of careful analysis of the aspects linked to daily use
More informationDescription Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA
Delivery program Contactor relay, 3N/O+1N/C, DC current Part no. DILA-31(24VDC) Catalog No. 276379 Eaton Catalog No. XTRE10B31TD EL-Nummer 4130206 (Norway) Product range DILA relays Application Contactor
More informationINTEGRATED AUTOMATION ACTUATORS AND OPERATORS
25 34 13.13 - PART 1 - GENERAL 1.1 THE REQUIREMENT A. The CONTRACTOR shall provide complete Valve Actuators and Operators as shown on the drawings, control diagrams, herein, or in other Sections of the
More informationOiltight Switches & Pilot Devices
ø22mm - TW Series Accessories TW Series Accessories Appearance Description/Usage Part Number Lamp Removal Tool Rubber tool used to install or remove LED s and incandescent lamps OR-55 Contact Block Remover
More informationPCL451. Manual Preset Indexer. User s Guide E Landon Drive, Anaheim, CA
PCL451 Manual Preset Indexer User s Guide A N A H E I M A U T O M A T I O N 4985 E Landon Drive, Anaheim, CA 92807 e-mail: info@anaheimautomation.com (714) 992-6990 fax: (714) 992-0471 website: www.anaheimautomation.com
More informationControl Units Ex e in Stainless Steel LCS*.*
Features Assembly Stainless steel enclosures Suitable for operation in Zones 1, 2, 21 and 22 Certified Ex de and Ex tb Up to 4 operators per control unit, base-mounted contact blocks Wide choice of operators,
More informationAlpha. Alpha Pendant Control Station
Alpha The is a control device for all industrial machinery. It operates as an auxiliary controller of electrical motors through a power interface, such as a contactor or PLC. Designed for heavy duty, Alpha
More informationLevel-Lance Model 5400A
Sales Manual Section 100 PRODUCT SPECIFICATION 5400A GENERAL DESCRIPTION The ROBERTSHAW Level-Lance Model 5400A is a microprocessor based, multi-point On-Off capacitance type level detection system. Utilizing
More information29 $ Manual Motor Starters FREESHIPPING. MOTOR CONTROLS 25. Features: MMS-32H Frame. MMS-63H Frame.
www.factorymation.com/motorcontrols MOTOR CONTROLS 25 Manual Motor Starters High interrupt capacity Din rail and surface mounting Lockable handle (OFF position) IP20 finger safe terminals Class 10 thermal
More informationViamaster LED Series Luminaires For NEC and CEC Governed Hazardous Locations
Class I, Division, Groups A, B, C, D Class I, Zone, Group IIC Class II, Division, Groups F, G Zone, Group IIIB Type R,, X Applications For use in locations where: Flammable gases, vapors and dusts are
More informationMetering Devices, Protective Relays, Software and Connectivity. Pre-Wired Control Power, Voltage and CT Inputs
.3 Features and Benefits Saves installation time and cost One part number to order; no need to worry that any part has been left out Pick the meter or meters you need as it is designed to fit various Eaton
More informationAutomation Products. Pilot devices The complete range
Automation Products Pilot devices The complete range Pilot devices Contents Presentation of the complete range 2 The whole range 4 Modular range, 22 mm General description 7 Pushbuttons, type MP, MPD 10
More informationIndustrial Baymaster HL LED Luminaire High Bay for Ordinary Locations
Applications Powerful, efficient weatherproof lighting for applications such as: Warehouses Waste water treatment facilities Production facilities Processing plants Storage areas Locations requiring, Type
More informationQuick Start Guide TS A
Quick Start Guide TS 930 125-630A DANGER HAZARD OF ELECTRICAL SHOCK, EXPLOSION, OR ARC FLASH Read and understand this quick start guide before installing and operating the transfer switch The installer
More informationOiltight Switches & Pilot Devices
LED and Incandescent ilot Lights (Sub-Assembled) Removable Terminal* + Operator + Lamp + Lens = Completed Unit * Removable terminals are applicable for CB terminated types only. art Numbers: ilot Light
More informationCompact plugs and receptacles standard or high temperature rated
PN Features and Ratings p. 118 PN20 p. 119 PN20 High Temp p. 121 Spare parts p. 123 Dimensions p. 125 Compact plugs and receptacles standard or high temperature rated PN Series plugs and receptacles offer
More information1.4. Pushbuttons and Indicating Lights. Product Overview
Contents Product Overview Product Description The RMQ-6 pushbutton line offers a wide array of functional and attractively designed illuminated and non-illuminated pushbuttons, selector switches, emergency
More information