CHARTSELECT and FISHSMART User Manual TABLE OF CONTENTS Overview............................................. 1 Preparation.......................................... 2 Using ChartSelect.................................... 4 FishSmart Overview.................................. 16 Using FishSmart..................................... 17 Marking Waypoints, Routes, and Tracks with FishSmart.. 28 Navigating with FishSmart........................... 38 Import/Export Navigation Data......................... 41 Contact Humminbird.................................. 42 532362-2_A
THANK YOU! Thank you for choosing Humminbird, the #1 name in marine electronics. Humminbird has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. We encourage you to read this manual carefully in order to get full benefit from all the features and applications of your Humminbird product. Contact Humminbird Customer Service at 1-800-633-1468 or visit our Web site at humminbird.com. WARNING! This device should not be used as a navigational aid to prevent collision, grounding, boat damage, or personal injury. When the boat is moving, water depth may change too quickly to allow time for you to react. Always operate the boat at very slow speeds if you suspect shallow water or submerged objects. WARNING! The electronic chart is an aid to navigation designed to facilitate the use of authorized government charts, not to replace them. Only official government charts and notices to mariners contain all of the current information needed for the safety of navigation, and the captain is responsible for their prudent use. WARNING! Do NOT delete or change the AC folder, LkMaster folder, or SI folder when saving an AutoChart ZeroLine region map to an SD or microsd card. WARNING! Humminbird is not responsible for the loss of data files (waypoints, routes, tracks, groups, snapshots, recordings, etc.) that may occur due to direct or indirect damage to the unit s hardware or software. It is important to back up your PC and control head data files periodically. Data files should also be saved to your PC before restoring the control head defaults or updating the software. See your Humminbird online account at humminbird.com for more information. NOTE: The illustrations in this manual may not look the same as your product, but your product will function in the same way. NOTE: To purchase accessories for your control head, visit our Web site at humminbird.com or contact Humminbird Customer Service at 1-800-633-1468. NOTE: The procedures and features described in this manual are subject to change without notice. This manual was written in English and may have been translated to another language. Humminbird is not responsible for incorrect translations or discrepancies between documents. NOTE: Product specifications and features are subject to change without notice. NOTE: FishSmart includes in-app purchases. Message and data rates may apply with your mobile device carrier. WARNING! This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Environmental Compliance Statement: It is the intention of Johnson Outdoors Marine Electronics, Inc. to be a responsible corporate citizen, operating in compliance with known and applicable environmental regulations, and a good neighbor in the communities where we make or sell our products. WEEE Directive: EU Directive 2002/96/EC Waste of Electrical and Electronic Equipment Directive (WEEE) impacts most distributors, sellers, and manufacturers of consumer electronics in the European Union. The WEEE Directive requires the producer of consumer electronics to take responsibility for the management of waste from their products to achieve environmentally responsible disposal during the product life cycle. ATTENTION INTERNATIONAL CUSTOMERS: Products sold in the U.S. are not intended for use in the international market. Humminbird international units provide international features and are designed to meet country and regional regulations. Languages, maps, time zones, units of measurement, and warranty are examples of features that are customized for Humminbird international units purchased through our authorized international distributors. To obtain a list of authorized international distributors, please visit our Web site at humminbird.com or contact Customer Service at (334) 687-6613. WEEE compliance may not be required in your location for electrical & electronic equipment (EEE), nor may it be required for EEE designed and intended as fixed or temporary installation in transportation vehicles such as automobiles, aircraft, and boats. In some European Union member states, these vehicles are considered outside of the scope of the Directive, and EEE for those applications can be considered excluded from the WEEE Directive requirement. This symbol (WEEE wheelie bin) on product indicates the product must not be disposed of with other household refuse. It must be disposed of and collected for recycling and recovery of waste EEE. Johnson Outdoors Marine Electronics, Inc. will mark all EEE products in accordance with the WEEE Directive. It is our goal to comply in the collection, treatment, recovery, and environmentally sound disposal of those products; however, these requirements do vary within European Union member states. For more information about where you should dispose of your waste equipment for recycling and recovery and/or your European Union member state requirements, please contact your dealer or distributor from which your product was purchased. ROHS Statement: Product designed and intended as a fixed installation or part of a system in a vessel may be considered beyond the scope of Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. AutoChart, AutoChart PRO, AutoChart ZeroLine Map Card, ChartSelect, FishSmart, Humminbird, HumminbirdPC, and LakeMaster are trademarked by or registered trademarks of Johnson Outdoors Marine Electronics, Inc. Adobe, Acrobat, Adobe PDF, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Android is a trademark of Google Inc. Apple, iphone, and Macintosh are registered trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Navionics is a registered trademark of Navionics S.p.A. Pentium is a trademark of Intel Corporation or its subsidiaries in the U.S. and/or other countries. 2016 Johnson Outdoors Marine Electronics, Inc. All rights reserved.
OVERVIEW The instructions in this manual describe how to purchase and download Humminbird lake charts and chart layers using the ChartSelect Web site and the FishSmart mobile application. Display your purchased charts on your Humminbird control head(s) or on a mobile device (smartphone, tablet computer, etc.). For information and instructions about using charts on your control head, see your control head operations manual. Operations manuals and accessory manuals for LakeMaster Map Cards, AutoChart, AutoChart ZeroLine Map Cards, and other Humminbird LakeMaster products are available for download on our Web site at humminbird.com. Humminbird ChartSelect Humminbird ChartSelect allows you to purchase Humminbird charts and chart layers that you can save to encrypted SD cards. You can also purchase AutoChart ZeroLine region maps and AutoChart software for your PC (personal computer). Humminbird FishSmart Humminbird FishSmart is a mobile application that you can download to a mobile device (smartphone, tablet computer, etc.). FishSmart allows you to purchase and display Humminbird LakeMaster charts. You can also create, save, and navigate waypoints, routes, and tracks. NOTE: Wi-Fi or cellular data must be enabled on your mobile device to download purchased charts and share navigation data. Location Services must also be enabled for GPS tracking. Overview 1
PREPARATION We recommend that you read this guide completely before making any purchases. Also, visit chartselect.humminbird.com to confirm control head and mobile device compatibility. Customer Service: If you have questions, contact Humminbird Customer Service by visiting our Web site at humminbird.com or by calling 1-800-633-1468. 1 Register your Humminbird Products Set up a humminbird.com account and register your Humminbird control head(s) and accessories so that you will receive the latest Humminbird news, including accessory compatibility and software update information. 1. Go to our Web site at humminbird.com. Select Support > Register your Product. If you already have a humminbird.com account, select My Humminbird. 2. Follow the on-screen prompts to create a new account and register your products. NOTE: With an AutoChart purchase, register the provided serial number for future updates. Humminbird LakeMaster charts do not need to be registered. 2 Set Up a Humminbird ChartSelect Account 1. Go to the ChartSelect Web site at chartselect.humminbird.com. Select Register. 2. Enter your information and follow the on-screen prompts to create a new account. 3. Confirm Account: A confirmation e-mail will be sent to the e-mail address saved to your ChartSelect account. Open the e-mail and follow the instructions provided to confirm your ChartSelect account. 2 Preparation
3 Update your Control Head Software to Display Purchased Charts To display LakeMaster and AutoChart charts, you will need the most up-to-date software on your Humminbird control head. See your control head operations manual for additional information about updating software. 1. Before the control head software is updated or restored to system defaults, export your navigation data and copy your screen snapshots to an SD card. See your control head operations manual for instructions. Inserting a microsd Card into the Adapter WARNING! Humminbird is not responsible for the loss of data files (waypoints, routes, tracks, groups, snapshots, recordings, etc.) that may occur due to direct or indirect damage to the unit s hardware or software. It is important to back up your PC and control head data files periodically. 2. SD Card: Install a blank SD card into the PC card slot. microsd Card: Install a formatted microsd card into the adapter, and insert it into the slot on your PC. 3. Go to humminbird.com, and select My Humminbird to sign in to your account. 4. Select the My Equipment tab. The available software updates are listed as Downloads under each registered product. Under Downloads, click the file name. Read the instructions in the dialog box and select Download. Follow the on-screen prompts to save the software file to the SD or microsd card. 5. Power on your Humminbird control head. Start Normal mode. 6. SD Card: Insert the SD card with the updated software file into the control head card slot. microsd Card: Remove the microsd card from the adapter and install the card into the control head card slot. 7. Follow the on-screen prompts to update the control head software. 8. When the software update is complete, remove the SD or microsd card from the control head card slot. Inserting a microsd Card into the Card Slot Inserting an SD Card into the Card Slot Preparation 3
USING CHARTSELECT Use the instructions in this section to purchase Humminbird LakeMaster charts and/or AutoChart PC software on the ChartSelect Web site. Before proceeding, visit chartselect.humminbird.com to confirm control head compatibility. Supplies In addition to your Humminbird control head, you will need a computer with high-speed Internet access and a blank 32 GB (gigabyte) SD or microsd card (depending on your control head model) that is formatted to the FAT32 file system. WARNING! Humminbird LakeMaster charts and AutoChart ZeroLine region maps cannot be saved to the same SD card. A separate 32 GB SD card is required for each AutoChart ZeroLine region map. Minimum PC Requirements Your computer should have the following minimum specifications: Microsoft Windows VISTA, 7, 8, or higher OR Mac OS X 10.6 or newer 1 GHz* Pentium 4 or Athlon CPU (*2 GHz is recommended) 512 MB* RAM (*1024 MB RAM is recommended) 10 GB free hard drive SD card reader and/or microsd card reader High-speed internet connection 1 Purchase Humminbird LakeMaster Charts and/or Chart Layers You can purchase a Humminbird LakeMaster chart with all available chart layers as a chart bundle or you can purchase individual chart layers for the selected lake. Before proceeding, review the following important information: Save LakeMaster Charts to One SD Card: You can save more than one downloaded LakeMaster chart to an SD or microsd card. A downloaded LakeMaster chart can only be saved to one SD or microsd card for the life of the product. In the event you delete, format, or overwrite the SD card, purchased charts will remain available for re-download (to the same SD or microsd card) for 1 year from the date of purchase. Do not save LakeMaster charts and AutoChart ZeroLine region maps to the same SD or microsd card. A separate 32 GB SD or microsd card is required for each AutoChart ZeroLine region map. SD Card Format: The SD Card or microsd card must be formatted to use the FAT32 file system. Confirm your SD or microsd card is formatted to FAT32 before saving charts to the card. Chart File Sizes: Chart files range in size, and future updates may require additional space on the SD card. Use a 32 GB SD or microsd card to ensure enough space for additional charts and/or future chart updates. WARNING! You must use a blank SD or microsd card that is formatted to FAT32. Do NOT use a chart or map card (e.g., LakeMaster, Navionics). NOTE: Do not use an SD or microsd card that is larger than 32 GB. 4 Using ChartSelect
1. Select a LakeMaster Chart 1. Log in to your chartselect.humminbird.com account. 2. Select Store > LakeMaster. 3. Search with the Map: Use the on-screen map to search for available lake charts. OR Search by Lake Name: Type the lake name into the search bar. 4. Review the search results. To view more information about a chart and the available chart layers, click Details. Searching for a Lake account login search bar map scroll through the search results list click on a blue or yellow marker to zoom in on available charts in that area click to see more information about the lake chart click on a red flag to view lake details Using ChartSelect 5
5. Purchase Chart Bundle: To purchase the LakeMaster chart with all available layers, click Add Bundle to Cart. OR Purchase Individual Chart Layers: To purchase individual chart layers, select the layer(s) under Available Layers. Click Add to Cart. Selecting a Lake Chart and/or Chart Layers search by lake name close lake details selected lake displayed on the map purchase selected lake chart and all available layers as a bundle select individual chart layers 6 Using ChartSelect
2. Confirm Control Head Compatibility and Add the Selected Item(s) to your Cart 1. After selecting Add to Cart, confirm the selected lake chart or chart layer is compatible with your control head model. 2. Click the plus (+) sign next to your control head model to add the selected chart to your cart. Confirming Control Head Compatibility Click the plus (+) sign to select your control head model. 3. Repeat: Repeat procedures 1 and 2 to purchase additional LakeMaster charts. 4. To complete your purchase, proceed to the section Complete your Chart Purchase. Using ChartSelect 7
2 Purchase AutoChart ZeroLine Region Maps and AutoChart PC Software You can purchase individual AutoChart ZeroLine region maps or you can purchase an AutoChart or AutoChart PRO bundle, which includes the map for the region you select and the AutoChart software for your PC. Before proceeding, review the following information: Save One ZeroLine Region Map to One SD Card: You can save one downloaded ZeroLine region map to one SD or microsd card. Do not save multiple maps to the same SD card. A downloaded ZeroLine map can only be saved to one SD or microsd card for the life of the product. In the event you delete, format, or overwrite the SD card, purchased charts will remain available for re-download (to the same SD or microsd card) for 1 year from the date of purchase. Do not save LakeMaster charts and AutoChart ZeroLine region to the same SD or microsd card. A separate 32 GB SD or microsd card is required for each AutoChart ZeroLine region map. SD Card Format: The SD Card or microsd card must be formatted to use the FAT32 file system. Confirm your SD or microsd card is formatted to FAT32 before saving charts to the card. Chart File Sizes: Chart files range in size, and future updates may require additional space on the SD card. Use a 32 GB SD or microsd card to ensure enough space for additional charts and/or future chart updates. WARNING! You must use a blank SD or microsd card that is formatted to FAT32. Do NOT use a chart or map card (e.g., LakeMaster, Navionics). NOTE: Do not use an SD or microsd card that is larger than 32 GB. 8 Using ChartSelect
1. Purchase an AutoChart or AutoChart PRO Software Bundle If you already own AutoChart or AutoChart PRO software, skip this section and proceed to Purchase Individual AutoChart ZeroLine Maps. 1. Log in to your chartselect.humminbird.com account. 2. Select Store > AutoChart. 3. Select an AutoChart software bundle. Click Add to Cart. 4. Select a ZeroLine region from the displayed menu and click Add to Cart. 5. To complete your purchase, proceed to Complete your Chart Purchase. 2. Purchase Individual AutoChart ZeroLine Maps Use the following instructions to select individual AutoChart ZeroLine maps for specific regions. 1. Log in to your chartselect.humminbird.com account. 2. Select Store > AutoChart. 3. Select a region from the list of ZeroLine region maps. To view the coverage of the selected region, click on the map thumbnail. 4. Click Add to Cart. Selecting a Lake Chart and/or Chart Layers Click on the map thumbnail to view the zeroline map coverage (red outline). Using ChartSelect 9
3 Complete your Chart Purchase 1. When you are ready to complete your purchase, click on the cart tab. 2. Review the items in your cart. To proceed with the chart purchase, click Checkout. To remove a chart from your cart, select Remove. To remove all charts from your cart, select Empty Cart. To change the quantity of a specific item in your cart, click plus (+) or minus (-) under Quantity. Completing your Chart Purchase cart tab 3. Enter your payment information. When you are ready to complete the purchase, click Checkout. 4. Keep the ChartSelect web page open and proceed to the next section. 10 Using ChartSelect
4 Download the Computer Applications For LakeMaster chart purchases, proceed to Install the ChartSelect Downloader Tool. For AutoChart purchases, proceed to Install AutoChart. Install the ChartSelect Downloader Tool (with LakeMaster and AutoChart purchases) The ChartSelect Downloader Tool is a computer application that allows you to manage your purchased charts and save them to encrypted SD or microsd cards. 1. Review the computer requirements in the section Using ChartSelect: Supplies. 2. Open the email invoice for your ChartSelect purchase. NOTE: If the email does not appear in your inbox, check your spam folder. 3. Locate the link to download the ChartSelect Downloader Tool. Click Mac Download or PC Download (depending on your operating system). 4. Once it is downloaded, double-click the file from your Downloads window or from the location on your computer where you saved the self-extracting setup file. Select Run. 5. Follow the on-screen prompts to complete the software installation. NOTE: For Windows 7 users, the 'Everyone' or 'Just Me' options will depend on the user permissions that are assigned to you on that computer. The installation may require the installer to have Administrator permissions to install the application for 'Everyone'. Downloading the ChartSelect Downloader Tool Follow the on-screen instructions to complete the software download. Using ChartSelect 11
Install AutoChart PC (included with AutoChart purchases only) Use the following instructions to download AutoChart PC or AutoChart PRO to your PC. 1. Review the computer requirements in the section Using ChartSelect: Supplies. 2. Open the email invoice for your AutoChart purchase. NOTE: If the email does not appear in your inbox, check your spam folder. 3. Locate the link to download the AutoChart software. Click Mac Download or PC Download (depending on your operating system). 4. Once it is downloaded, click on the file from your Downloads window or from the location on your computer where you saved the extracted file. Select Run. 5. Follow the on-screen prompts to complete the software installation. When prompted, enter the AutoChart license (or serial) number. It is provided on the invoice page and in the invoice email. NOTE: It is important to save your AutoChart serial number. You will need it any time you wish to install the software. Register your AutoChart Serial Number (with AutoChart downloads only) It is important to register your AutoChart serial number so that you will receive the latest Humminbird news, including accessory compatibility and software update information. 1. Go to our Web site at humminbird.com and select My Humminbird. 2. Log in to your Humminbird account. 3. Select My Product Support > Register a Product. 4. Follow the on-screen prompts to register your AutoChart serial number. 12 Using ChartSelect
5 Encrypt the SD or MicroSD Card(s) To save a LakeMaster chart or AutoChart region map to an SD or microsd card, the card must be encrypted. Use the following instructions to encrypt the SD card or microsd card using your Humminbird control head. WARNING! You must use a blank SD or microsd card that is formatted to FAT32. Do NOT use a chart or map card (e.g., LakeMaster, Navionics, etc.). 1. Power On the Control Head 1. Press the POWER key. 2. Start Normal mode. 2. Install the SD or MicroSD Card 1. Unlock the SD Card*: Hold the card with the label facing up and locate the lock switch on the left side of the card. Slide the switch up (unlocked position). (*SD cards only. MicroSD cards do not have a lock switch.) 2. Install the card into the control head card slot. Unlocking and Installing the SD Card switch in unlocked position 3. Encrypt the SD Card Locate the instructions below for your control head model. ONIX and ION Series 1. Press the HOME key. 2. Select the Files tool. 3. Under Encrypt, select Encrypt SD Card 1 or Encrypt SD Card 2. Tap, or press the ENTER key, to select. 4. Follow the on-screen prompts. 5. Repeat: To encrypt additional SD or microsd cards, install a new SD or microsd card and repeat steps 3 and 4. Insert the SD card into the control head card slot. 800, 900, 1100, and HELIX Series 1. Press the MENU key twice to open the Main Menu. 2. Press the RIGHT or LEFT Cursor key to select the Setup Menu tab. 3. Select Encrypt SD Card. If you have two SD cards installed, select Left SD Card or Right SD Card. 4. Press the RIGHT Cursor key. 5. Follow the on-screen prompts. 6. Repeat: To encrypt additional SD or microsd cards, install a new SD or microsd card and repeat steps 1 through 5. Using ChartSelect 13
6 Save Purchased Charts to the SD or MicroSD Card Use the following instructions to save your purchased charts to an SD or microsd card. WARNING! You must use a blank SD or microsd card that is formatted to FAT32. Do NOT use a chart or map card (LakeMaster, Navionics, etc.). NOTE: In the event you delete, format, or overwrite the SD card, purchased charts will remain available for re-download (to the same SD or microsd card) for 1 year from the date of purchase. Save LakeMaster Charts or an AutoChart ZeroLine Region Map to the SD or microsd Card 1. Insert the unlocked, encrypted SD or microsd card (with adapter) into the card slot on your computer. 2. Open the ChartSelect Downloader tool. PC: Start > All Programs > Humminbird ChartSelect Mac: Applications > Humminbird ChartSelect 3. Log in to your ChartSelect account. 4. Select your Control Head Model: Use the drop-down menu to select your control head model. Log in to your ChartSelect account using your e-mail address and password. Opening the ChartSelect Downloader Tool select your control head model 14 Using ChartSelect
5. Select LakeMaster Chart(s): Select the LakeMaster chart(s) you want to save to the SD or microsd card. Click inside the checkbox to select. OR Select One AutoChart ZeroLine Map: Select the AutoChart ZeroLine region map you want to save to the SD or microsd card. Click inside the checkbox to select. WARNING! Do not save LakeMaster charts and AutoChart ZeroLine maps to the same SD or microsd card. A separate 32 GB SD or microsd card is required for each AutoChart ZeroLine region map. 6. Click Browse. Under Computer, select the SD or microsd card (commonly displayed as Removable Disk) and click Open to select. 7. Click Download. A status bar will display to indicate the download progress. 8. A confirmation box will display when the download is complete. Click OK. Saving a Lake Chart to an SD or MicroSD Card link to ChartSelect store ChartSelect Help purchased charts and chart layers currently selected chart Click Browse to select the installed SD card. The download status bar shows the download progress and file size of currently selected chart(s). Click Download to download the selected chart(s) to the SD card. 9. Remove the SD or microsd card from your PC card slot. The SD or microsd Card is now ready for operation. To Display a Lake on the Control Head: Insert the SD or microsd card into the control head card slot. When you install an SD card, the map source is changed automatically to match the SD card map source. If you install more than one SD map card, you can choose which chart source you want to use. Depending on your control head model, the map source menu will be under the Chart Menu Tab (800, 900, 1100, and HELIX Series) or under Settings > Chart (ONIX and ION Series). See your control head operations manual for further details about selecting chart sources. NOTE: Once the SD or microsd card is installed on the control head, AutoChart and LakeMaster menu options are automatically added to the menu system. See your control head operations manual for more information. Using ChartSelect 15
FISHSMART OVERVIEW Humminbird FishSmart is a mobile application that allows you to perform the following functions on your mobile device (smartphone, tablet computer, etc.): Purchase and Display Lake Charts: Use the mobile device s built-in map as a foundation for your purchased LakeMaster charts to see more detail on the chart display. Link your ChartSelect account to make additional chart purchases using FishSmart. Wi-Fi or cellular data must be enabled to download purchased charts to the mobile device. Mark Waypoints, Create Routes, and Navigate Tracks: Waypoints, routes, and tracks can be managed on-screen so you can save your favorites, edit names, and easily return to your favorite destinations. Location Services must be enabled for GPS tracking and navigation. Share Saved Navigation Data: Import and export saved waypoints, routes, and tracks, so that you can save them to an SD or microsd card and display them on your Humminbird control head. Wi-Fi or cellular data must be enabled to share navigation data. NOTE: FishSmart includes in-app purchases. Message and data rates may apply with your mobile device carrier. WARNING! Do not rely on Wi-Fi or cellular data for navigation as cellular network coverage is not guaranteed off-shore. The electronic chart is an aid to navigation designed to facilitate the use of authorized government charts, not to replace them. Only official government charts and notices to mariners contain all of the current information needed for the safety of navigation, and the captain is responsible for their prudent use. Preparation In addition to the instructions in this section, confirm your mobile device has Location Services enabled for GPS tracking and a Wi-Fi or cellular data connection for downloading charts. NOTE: Some of the information and instructions may not apply to all mobile devices. Refer to the instructions included with your mobile device. 1. Confirm Compatibility 1. Visit our Web site at chartselect.humminbird.com to confirm mobile device compatibility and the required software version. Apple ios Google Android Required Software Version 7.1 or newer 4.0 or newer (API level 14) 2. Set Up a Humminbird ChartSelect Account See the section Preparation: Set Up a Humminbird ChartSelect Account. 3. Download the FishSmart Mobile App 1. Apple ios: Open the App Store. Google Android: Open the Play Store. 2. Log in to your app store account. 3. Search the app store for FishSmart. 4. Download the FishSmart app to your device. 5. Follow the on-screen instructions to complete the app download. 16 FishSmart Overview
USING FISHSMART Confirm you have read the setup instructions in the previous section FishSmart Overview. Use the following sections to get started using FishSmart. Refer to the instructions for your mobile device operating system: Apple ios or Google Android. NOTE: Wi-Fi or cellular data must be enabled on your mobile device to download purchased charts and share navigation data. Location Services must also be enabled for GPS tracking. What s on the Display The FishSmart app opens to display a topographical map of the area surrounding your current location. Opening FishSmart (Apple ios Tablet) compass map scale base map GPS & chart orientation indicator FishSmart menus Using FishSmart 17
Opening FishSmart (Google Android Tablet) FishSmart main menu North-Up indicator compass base map GPS & chart orientation indicator map scale What s on the Display Description Compass Displays the current heading. This feature can be set to display or hide. Map Scale Base Map Chart Overlay Transparency GPS & Chart Orientation Indicator Menus The ratio of measurement comparing the actual distance between locations identified on the map. Zoom in and out of the display to adjust the map scale. This feature can be set to display or hide. Shows background reference information for your current location. Change the map type within the FishSmart menu (satellite, hybrid, terrain, etc.). This feature can be set to display or hide. When you display a LakeMaster chart, the chart overlay transparency setting will be displayed on-screen. Use the slider bar to adjust the transparency of the chart overlay. See Download and Display Purchased Charts on your Mobile Device. Tap the GPS & Chart Orientation Indicator to display your current location. Tap the Chart Orientation Indicator repeatedly to change the chart orientation (Head-up, North-up, or Center Vessel). See Set the Chart Orientation. On Apple ios devices, the menus are located at the bottom of the display. On Google Android devices, the menus are organized under the FishSmart main menu. Waypoints: Manage (edit, delete, export, etc.) and navigate marked waypoints. Routes: Manage (edit, delete, export, etc.) and navigate routes. Tracks: Manage (edit, delete, export, etc.) and navigate tracks. Maps: Download and display purchased charts. Settings: Adjust the chart display by selecting depth highlights, display or hide the compass, change the base map type, etc. 18 Using FishSmart
Touch Screen Overview A summary of the mobile device touch screen actions are shown here. NOTE: Some of the information and instructions may not apply to all mobile devices. Refer to the instructions included with your mobile device. Tap or Press and Hold Select a Menu or Icon: Tap the selection once. Mark a Waypoint or Start a Route: Press and hold a position on the view to mark a waypoint or start a new route. Zoom In: Tap the screen twice with one finger. Zoom Out: Tap the screen twice with two fingers. Share or Delete a Saved Item (Google Android only): Press and hold a saved waypoint, route, track, or chart to select the item to export or delete. Pinch In/Out Zoom In: Touch the screen with two fingers and move them apart. Zoom Out: Touch the screen with two fingers and move them closer together. Swipe Side to Side Pan: Drag one or two fingers across the screen to see more of the chart that is displayed off-screen. One Finger Swipe (Up or Down) Browse Menus: Swipe with one finger to scroll through a menu list (up or down). One Finger Swipe (Left or Right) Select a Slider Bar Setting: Press and hold on the slider bar circle and drag it left or right to adjust the setting. Pan: Drag one or two fingers across the screen to see more of the chart that is displayed off-screen. Delete a Saved Item (Apple ios only): Select a waypoint, route, track, or saved chart in the menu system and swipe left. Tap Delete. Using FishSmart 19
1 Log in to your ChartSelect Account Log in to your ChartSelect Account to access purchased charts and make in-app purchases. 1. Apple ios: Tap the Settings menu icon. Google Android: Tap the FishSmart main menu. 2. Select ChartSelect Account. 3. Use the on-screen keyboard to type in your account username and password. Tap Login. Logging in to your ChartSelect Account (Apple ios Tablet) Type in your username and password. arrows to go back or forward deletes a single character starts a new line uppercase uppercase numbers and symbols space bar underscore dash minimize keyboard Tap to Select a Character 20 Using FishSmart
2 Download and Display Purchased Charts on your Mobile Device Your purchased LakeMaster charts are listed under the Maps menu. To display a purchased chart on your mobile device, you must download the lake chart to the device. Use the instructions in this section to download purchased charts. A Wi-Fi or cellular data connection is required. NOTE: Visit our Web site at humminbird.chartselect.com to purchase lake charts. 1. Apple ios: Tap the Maps menu icon. Google Android: Tap the FishSmart main menu. Select Maps. 2. Download a Chart: Tap the download symbol next to the lake chart name (see the illustration Downloading Purchased Charts). A check mark will display when the download is complete. 3. Repeat: Repeat steps 1 and 2 to download additional purchased charts. 4. Display a Chart: Open the Maps menu and tap the lake chart name. Opening the Maps Menu (Google Android Tablet) maps menu Tap to Select Using FishSmart 21
Downloading Purchased Charts (Apple ios Tablet) search tabs Tap the download symbol to save the chart to the device. maps menu icon Tap to Select 22 Using FishSmart
3 Set Up the Chart Display Use the following instructions to customize the chart display by adjusting the LakeMaster settings. See the Humminbird LakeMaster Accessory Manual for additional information about these features. 1. Apple ios: Tap the Settings menu icon. Select Map Options. Google Android: Tap the FishSmart main menu. Select Map Options. 2. Select a menu option. Press and drag the slider, or tap the plus (+) or minus (-) signs, to adjust the setting. Menu Setting Depth Highlight Highlight Range Water Level Offset Shallow Water Highlight Description Turn on Depth Highlight to highlight a depth setting. The depth you set will be highlighted in green. Use Depth Highlight with Highlight Range. When a Depth Highlight is active, use Highlight Range to highlight a range on each side of the highlighted depth. For example, if you know a certain fish is holding at 18 to 20 feet, you can set the Depth Highlight at 19 feet, and the Highlight Range at +/ 1 foot. The view will show a green band from 18 to 20 feet. Adjust the setting to change the water level displayed on the chart. For example, if you know the lake is down 5 feet, set the Water Level Offset setting to -5. The displayed numbers on the Contour Lines will adjust from the Water Level Offset setting, and the water level offset will be highlighted in brown to extend the land visually on the display. Turn on Shallow Water and adjust the slider. When the depth is equal to or less than the amount set, it will be highlighted in red. For example, if your boat has a draft of 3 feet, set the Shallow Water menu to 3 feet, and the display will draw a red band from 0 to 3 feet. Base Map Select the type of base map to display (satellite, hybrid, terrain, etc.). Depth Unit Select the unit of measure for all depth-related readouts. Coordinate Format Select the format of the latitude and longitude position display. Compass Card Display or hide the digital compass. Depths & Contours Display or hide depths and/or contours on the chart display. Scale Bar Display or hide the map scale. Show Lake Map Markers Display or hide Lake Map Markers, which indicate areas where Humminbird lake charts are available. (See the illustration Setting the Chart Orientation). Using FishSmart 23
Adjusting the Map Display Settings (Apple ios Tablet) shallow water highlight (red) depth highlight & depth highlight range (green) display depth and/or contour data depth colors depth colors LakeMaster settings settings menu icon Tap to Select OR Adjust Settings Drag Slider to Adjust Settings 24 Using FishSmart
4 Set the Chart Orientation The default chart orientation is North-Up. Use the following instructions to change the chart orientation to Head-Up or Center Vessel. North-Up: The chart is oriented with North up on the display, and the boat rotates according to its heading or COG (Course Over Ground). Head-Up: The boat s current heading points up, and the chart rotates around the boat icon so that it always points up on the display. The heading is provided by the mobile device's internal compass. Center Vessel: The chart is oriented with North up on the display, and the chart rotates around the boat icon so that the boat is always in the center of the screen. Set the Chart Orientation 1. Apple ios: Tap the chart orientation indicator until the display is set to either Head-Up, North Up, or Center Vessel. Google Android: Tap the chart orientation indicator until the display is set to either Head-Up or Center Vessel. To return to North-Up, tap the North-Up Indicator, which displays under the FishSmart main menu. Setting the Chart Orientation (Google Android Tablet) compass North-Up indicator lake map marker chart orientation indicator (currently set to North-Up) Tap to Change the Setting Using FishSmart 25
Setting the Chart Orientation (Apple ios Tablet) lake map marker GPS & chart orientation indicator (currently set to North-Up) Tap to Change the Setting 26 Using FishSmart
5 Adjust the Chart Transparency Adjust the transparency of the displayed LakeMaster chart to see more or less detail. 1. Press and drag the orange slider bar left or right to adjust the setting. Adjusting the Chart Transparency (Google Android Tablet) transparency slider bar Drag Slider to Adjust Settings Using FishSmart 27
MARKING WAYPOINTS, ROUTES, AND TRACKS WITH FISHSMART Use the instructions in the following section to create waypoints, routes, and tracks using FishSmart on your mobile device. You can export saved navigation data as.gpx files that can be saved to SD or microsd cards to use on your Humminbird control head. NOTE: Wi-Fi or cellular data must be enabled on your mobile device to download purchased charts and share navigation data. Location Services must also be enabled for GPS tracking. NOTE: Refer to your control head operations manual for more information about waypoints, routes, and tracks. Marking Waypoints, Routes, and Tracks (Apple iphone) waypoint icon (blue dot) saved route (black line) 28 Using FishSmart
Mark Waypoints Waypoints are saved latitude/longitude positions. They mark a position of interest such as your favorite fishing area, structure, or marker buoy. Display a LakeMaster chart on your mobile device and use the following instructions to mark waypoints on the chart. You can edit the waypoint name, coordinates, and add notes in the Waypoints menu. NOTE: For navigation information, see Navigating with FishSmart. Mark a Waypoint See the illustration Marking a Waypoint. 1. With a chart displayed on-screen, press and hold the location on the map where you want to mark the waypoint. 2. From the displayed menu, select Add Waypoint. Move a Waypoint 1. With the chart displayed on-screen, tap the waypoint icon. 2. Press and hold the waypoint icon, then drag the waypoint to a new location on the chart. Delete a Saved Waypoint See the illustration Deleting a Saved Waypoint. 1. Apple ios: Tap the Waypoints menu icon. Swipe left on the waypoint name using one finger. Tap Delete. Google Android: Tap the FishSmart main menu. Select Waypoints. Press and hold a waypoint until it is highlighted, and tap the Trash icon. Edit a Saved Waypoint 1. Apple ios: Tap the Waypoints menu icon. Google Android: Tap the FishSmart main menu. Select Waypoints. 2. Apple ios: Select the waypoint. Tap Edit. Google Android: Tap the waypoint name to select it. 3. Use the Edit menu to change the name, coordinates, add notes, etc. 4. Apple ios: Tap Save. Google Android: Edits are automatically saved. Display/Hide a Saved Waypoint Use the following instructions to display or hide a saved waypoint from the chart display. 1. Apple ios: Tap the Waypoints menu icon. Google Android: Tap the FishSmart main menu. Select Waypoints. 2. Apple ios: Select the waypoint. Tap Show/Hide. Google Android: Select a waypoint. Tap the vertical dots to open the submenu and tap Show/Hide. Using FishSmart 29
Marking a Waypoint (Apple ios Tablet) marked waypoint delete marked waypoint see more information about the marked waypoint and start navigation Edit the waypoint name. Change the latitude/longitude coordinates. Add notes about the waypoint. Tap to Select 30 Using FishSmart
trash icon Deleting a Saved Waypoint (Google Android Tablet) selected waypoint Press and Hold to Select Using FishSmart 31
Create Routes Routes link two or more waypoints together to create a path for navigation. A route represents your intended navigation and shows the shortest path from each data point to the next. The distance between each waypoint is a route leg. Display a LakeMaster chart on your mobile device and use the following instructions to create routes on the chart. You can edit the route name, coordinates, and add notes in the Routes menu. WARNING! You should always be aware of your surroundings and watch for any potential obstacles. NOTE: For navigation information, see Navigating with FishSmart. Create a New Route See the illustration Creating a Route. 1. With a chart displayed on-screen, press and hold the location on the map where you want to mark the start or end point. 2. From the displayed menu, select New Route. 3. Tap a location on the map to add a new waypoint. 4. Repeat: Repeat step 3 to add more waypoints to the route. 5. Save: Press and hold a position on the map. From the displayed menu, tap Save Route. Add New Waypoints to a Route Use the chart display to add new waypoints to a route. 1. Apple ios: Tap the Routes menu icon. Google Android: Tap the FishSmart main menu. Select Routes. 2. Apple ios: Select a route. Tap Add Waypoints. Google Android: Select a route. Tap the vertical dots to open the submenu and tap Add Waypoints. 3. Tap a location on the map to add a new waypoint. 4. Repeat: Repeat step 3 to add more waypoints to the route. 5. Save: Press and hold a position on the map. From the displayed menu, tap Save Route. Add Saved Waypoints to a Route You can add saved waypoints to a route from the Routes menu or the Waypoints menu. 1. Apple ios: Tap the Waypoints menu icon. Google Android: Tap the FishSmart main menu. Select Waypoints. 2. Apple ios: Select a waypoint. Tap Add to Route. Google Android: Select a waypoint. Tap the vertical dots to open the submenu and tap Add to Route. 3. Select a route. Edit a Saved Route 1. Apple ios: Tap the Routes menu icon. Google Android: Tap the FishSmart main menu. Select Routes. 2. Apple ios: Select the route. Tap Edit. Google Android: Tap the route name. 32 Using FishSmart
3. Use the Edit menu to change the name, add notes, etc. 4. Apple ios: Tap Save. Google Android: Edits are automatically saved. Delete a Route 1. Apple ios: Tap the Routes menu icon. Swipe left on the route name using one finger. Tap Delete. Google Android: Tap the FishSmart main menu. Select Routes. Press and hold a route until it is highlighted, and tap the Trash icon. Display/Hide a Saved Route Use the following instructions to display or hide a saved route from the chart display. 1. Apple ios: Tap the Routes menu icon. Google Android: Tap the FishSmart main menu. Select Routes. 2. Apple ios: Select a route. Tap Show/Hide. Google Android: Select a route. Tap the vertical dots to open the submenu and select Show/Hide. Using FishSmart 33
Creating a New Route (Apple ios Tablet) route (black line) Tap a position to add a waypoint to the route. Tap to save the new route. Tap to Add Waypoints Press and Hold to Display Save Route Menu 34 Using FishSmart
Adding a Saved Waypoint to a Route (Google Android Tablet) Tap the three vertical dots to open the submenu and select Add to Route. Tap to Select Using FishSmart 35
Create New Tracks A track is a collection of track points that contains the boat s detailed position history at set intervals. You can clear the Current Track or save it at any time. You can also edit saved track names and add notes in the Tracks menu. WARNING! You should always be aware of your surroundings and watch for any potential obstacles. Create a Track Use the following instructions to start a new track. 1. Apple ios: Tap the Tracks menu icon. Google Android: Tap the FishSmart main menu. Select Tracks. 2. Tap the plus (+) sign to start a new track. The track will begin recording immediately at the present boat position. NOTE: It is important to end the track before closing FishSmart or powering off the mobile device. Pause/Resume Track Recording You can pause and resume a live track while it is recording. 1. Apple ios: Tap the Tracks menu icon. Google Android: Tap the FishSmart main menu. Select Tracks. 2. Apple ios: Select the track. Tap Pause/Resume. Google Android: Select the track. Tap the vertical dots to open the submenu and tap Pause/Resume. Stop Track Recording Ending the track recording will automatically save the track. 1. Apple ios: Tap the Tracks menu icon. Google Android: Tap the FishSmart main menu. Select Tracks. 2. Apple ios: Select the track. Tap End Recording. Google Android: Select the track. Tap the vertical dots to open the submenu. Tap End Recording. Edit a Saved Track You can change the track name and add notes. 1. Apple ios: Tap the Tracks menu icon. Google Android: Tap the FishSmart main menu. Select Tracks. 2. Apple ios: Select the track. Tap Edit. Google Android: Tap the track name. 3. Use the Edit menu to change the name, add notes, etc. 4. Apple ios: Tap Save. Google Android: Edits are automatically saved. 36 Using FishSmart
Delete a Track 1. Apple ios: Tap the Tracks menu icon. Swipe left on the track name using one finger. Tap Delete. Google Android: Tap the FishSmart main menu. Select Tracks. Press and hold a track until it is highlighted, and tap the Trash icon. Display/Hide a Saved Track Use the following instructions to display or hide a saved track from the chart display. 1. Apple ios: Tap the Tracks menu icon. Google Android: Tap the FishSmart main menu. Select Tracks. 2. Apple ios: Select the track. Tap Show/Hide. Google Android: Select a track. Tap the vertical dots to open the submenu and tap Show/Hide. Using FishSmart 37
NAVIGATING WITH FISHSMART Location Services must be enabled on your mobile device for GPS tracking and navigation. WARNING! This device should not be used as a navigational aid to prevent collision, grounding, boat damage, or personal injury. When the boat is moving, water depth may change too quickly to allow time for you to react. Always operate the boat at very slow speeds if you suspect shallow water or submerged objects. WARNING! The electronic chart is an aid to navigation designed to facilitate the use of authorized government charts, not to replace them. Only official government charts and notices to mariners contain all of the current information needed for the safety of navigation, and the captain is responsible for their prudent use. WARNING! You should always be aware of your surroundings and watch for any potential obstacles. What s on the Navigation Display When you start navigation, the chart orientation icon displays the current setting (North-Up, Head-Up, or Center Vessel) and the following digital readouts display on the screen: Label Name Description DTN Distance to Next The distance between the boat position and the next waypoint on the route. TTN Time to Next The estimated time required to reach the next waypoint on the route. DTE Distance to Next The distance between the boat position and the last waypoint on the route. TTE Time to End The estimated time required to reach the last waypoint on the route. CTS Course to Steer The estimated course that the boat should steer in order to arrive at a waypoint. XTE Cross Track Error The straight-line distance of the boat from the intended route. XTE measures how far the boat is off course. 38 Using FishSmart
Start Navigation Use the following instructions to begin navigating a saved waypoint, route, or track. To start navigating a new track, see the section Create New Tracks. Navigate a Saved Waypoint, Route, or Track 1. Apple ios: Tap the Waypoints, Routes, or Tracks menu icon. Google Android: Tap the FishSmart main menu. Select Waypoints, Routes, or Tracks. 2. Apple ios: Select the saved waypoint, route, or track. Select Navigate. Google Android: Tap the vertical dots to open the submenu and select Navigate. Starting Navigation to a Saved Route (Apple ios Tablet) Tap to start navigation. Using FishSmart 39
End Navigation Use the following instructions to stop navigating. 1. Apple ios: Tap the Waypoints, Routes, or Tracks menu icon. Google Android: Tap the FishSmart main menu. Select Waypoints, Routes, or Tracks. 2. Apple ios: Select the waypoint, route, or track you are navigating. Select End Navigation. Google Android: Tap the vertical dots next to the waypoint, route, or track you are navigating, and select End Navigation. 40 Using FishSmart
IMPORT/EXPORT NAVIGATION DATA Use the following instructions to import and export navigation data (waypoints, routes, and tracks) using FishSmart. Navigation data is saved as.gpx files. You can export these files via e-mail, save to your cloud storage, or use an application that is compatible with.gpx files. Use HumminbirdPC to manage your Humminbird navigation data. Save navigation data to SD or microsd cards to display on your Humminbird control head(s). NOTE: Wi-Fi or cellular data must be enabled on your mobile device to download purchased charts and share navigation data. Location Services must also be enabled for GPS tracking. Export Navigation Data 1. Apple ios: Tap the Waypoints, Routes, or Tracks menu icon. Google Android: Tap the FishSmart main menu. Select Waypoints, Routes, or Tracks. 2. Apple ios: Tap the selected item. Select Export. Google Android: Press and hold the selected item until it is highlighted. Tap the Share icon (next to the Trash icon). 3. Tap the application you want to use to export the selected file. 4. Follow the on-screen prompts to export the file. Import Navigation Data Apple ios 1. Select the method (e-mail, cloud storage, etc.) you want to use to send the selected.gpx file to your mobile device. Attach the.gpx file. 2. Open the application on your mobile device. Download the attached.gpx file. 3. Tap, or press and hold, the.gpx file. From the displayed menu, select Import with FishSmart. 4. Follow the on-screen prompts to import the file. Google Android 1. Select the method (e-mail, cloud storage, etc.) you want to use to send the selected.gpx file to your mobile device. Attach the.gpx file. 2. Open the application on your mobile device. Tap the.gpx file. 3. Follow the on-screen prompts to import the file. OR 1. Manually copy the.gpx file to a folder on your mobile device. 2. Tap the.gpx file. 3. Follow the on-screen prompts to import the file. Import/Export Navigation Data 41
CONTACT HUMMINBIRD Contact Humminbird Customer Service in any of the following ways: Web site: humminbird.com E-mail: service@humminbird.com Telephone: 1-800-633-1468 Direct Shipping: Humminbird Service Department 678 Humminbird Lane Eufaula, AL 36027 USA Hours of Operation: Monday - Friday 8:00 a.m. to 4:30 p.m. (Central Standard Time) Social Media Resources: Facebook.com/HumminbirdElectronics Twitter.com (@humminbirdfish) YouTube.com/humminbirdtv 42 Contact Humminbird