Sage HRMS 2015 Installatin Guide Nvember 2014
Dcument versin: Nvember 19, 2014 This is a publicatin f Sage Sftware, Inc. Cpyright 2014 Sage Sftware, Inc. All rights reserved. Sage, the Sage lgs, and the Sage prduct and service names mentined herein are registered trademarks r trademarks f Sage Sftware, Inc. r its affiliated entities. All ther trademarks are the prperty f their respective wners. Windws and the Windws lg are either registered trademarks r trademarks f Micrsft Crpratin in the United States and/r in ther cuntries. The names f all ther prducts and services are prperty f their respective wners. Yur use f this dcument and the Sage prduct(s) described herein is gverned by the terms and cnditins f the Sage End User License Agreement ("EULA") r ther agreement that is prvided with r included in the Sage prduct. Nthing in this dcument supplements, mdifies r amends thse terms and cnditins. Except as expressly stated in thse terms and cnditins, the infrmatin in this dcument is prvided by Sage "AS IS" and Sage disclaims all express, implied r statutry warranties f any kind, including but nt limited t the warranties f merchantability, fitness fr a particular purpse r f nn-infringement. N implied license is granted t yu under any Sage intellectual prperty r trade secret right. Sage reserves the right t revise, supplement r remve infrmatin in this dcument at any time withut ntice t yu r thers. Sage End User License: http://na.sage.cm/us/legal/eula
Cntents Intrductin 5 Supprt and resurces 5 System requirements 5 Befre yu begin 5 Fr Sage HRMS Payrll installs and Sage 300 ERP integratin 6 Database Create credentials 6 Installing Sage HRMS 7 Step 1: Install Sage HRMS n the server 7 Step 2: Enable Server Prtcls and the SQL Brwser Service 9 Step 3: Install the Sage HRMS client 11 Step 4: Install SAP Crystal Reprts 12 Upgrading Sage HRMS 13 Step 1: Upgrade the server 13 Step 2: Upgrade the client 13 Step 3: Install SAP Crystal Reprts 2011 14 After upgrading 15 Cnverting frm Sage Abra Suite 16 T cnvert frm Sage Abra Suite versin 9.2 16 Upsizing FxPr database t SQL Server 17 Database structure changes 17 T run the Data Upsizing Wizard 18 Upsizing Sage Abra Suite custm reprts 19 Befre yu upsize reprts 19 Changing the data surce 19 Field name changes 20 Checking fr empty dates 21 Uninstalling Sage HRMS 2015 22 T uninstall Sage HRMS 22 Sage HRMS 2015 Installatin Guide - iii
Cntents Appendix 23 Verifying database cnnectins 23 Re-registering Sage HRMS t add a mdule r ptin 23 Sage HRMS 2015 Installatin Guide - 4
Intrductin Read all chapters in this guide befre yu install Sage HRMS.This guide prvides instructins fr installing Sage HRMS2015 fr the first time, upgrading Sage HRMS frm prir versins, and upgrading t Sage HRMS frm Sage Abra Suite. Supprt and resurces Sage strives t prvide yu with the best help and supprt in the industry. If yu have a questin, we're here t help! Help and dcumentatin. Many answers t cmmn questins can be fund in the help and dcumentatin included with Sage HRMS and Sage Emplyee Self Service. Custmer Supprt. Fr additinal articles and resurces, visit https://supprt.na.sage.cm r cntact Custmer Supprt at 800-829-0170 (U.S. and Canada). Please have yur Custmer ID handy when cntacting Custmer Supprt. Tax frms. Because all printed frms have variatins, Sage HRMS Payrll nly supprts frms printed by Sage Checks and Frms. Call Sage Checks and Frms at 800-617-3224 r rder nline at www.sagechecks.cm. System requirements The latest system requirements fr Sage HRMS2015 are available n the Knwledgebase (https://supprt.na.sage.cm) under Article ID 50163. Befre yu begin Make sure yu have the fllwing items befre yu begin a new installatin r an upgrade: Sage HRMS2015 installatin package SAP Crystal Reprts 2011 installatin package Sage HRMS2015 Installatin Guide (this dcument) Sage HRMS2015 release ntes (if yu are upgrading frm a prir versin) Nte: We recmmend that yu have Sage HRMS installed by a certified business partner r a member f the Sage Prfessinal Services Grup. Sage HRMS 2015 Installatin Guide - 5
Intrductin Fr Sage HRMS Payrll installs and Sage 300 ERP integratin If yu are installing Sage HRMS Payrll, be advised that Sage 300 ERP and Sage HRMS Payrll cannt reside n the same server. Befre yu start the installatin, make sure that Sage 300 ERP is nt n the server n which yu are installing Sage HRMS Payrll. Nte: When Sage HRMS 2015 is installed withut Sage HRMS Payrll, the prduct supprts integratin with Sage 300 ERP. The tl that facilitates this integratin is called AHLink. Database Create credentials Installatin requires Database Create credentials. Fr the installatin, the SQL accunt t be used during the installatin must have full DB Create (administrative) credentials, such as username SA (System Administratr) and the passwrd. If the Enterprise SQL DB Administratr will nt prvide an accunt with DB Create credentials, d the fllwing: Have the Enterprise SQL DB Administratr create a SQL accunt especially fr the Sage HRMS database and give that accunt name t the install team. After the install have the Enterprise SQL DB Administratr dwngrade this accunt t DB Owner credentials nly. Be advised that the accunt used during installatin is the same accunt and passwrd that will be used by the Sage HRMS applicatin. T test this accunt and passwrd cmbinatin, refer t the Database Cnnectin Tl instructins. Only alphanumeric characters are permitted n install screens: When yu enter text in fields n the installatin screens (such as cmpany name r server name), the text must cntain nly alpha r numeric characters (alphabetic characters a-z, A-Z and numeric characters 0-9). Yu must nt use any spaces r special characters, such as #, -, @ r punctuatin marks. Sage HRMS 2015 Installatin Guide - 6
Installing Sage HRMS This chapter prvides instructins t install Sage HRMS fr the first time. T familiarize yurself with the prcess, be sure t read all the steps befre yu start the installatin. If yu are upgrading frm a previus versin f Sage HRMS, skip t the apprpriate upgrade chapter f this guide. The installatin f Sage HRMS cnsists f tw separate installatins: installing n the server and installing n clients. Fllw the steps belw t first install Sage HRMS n a server, and then install a client either n the same server machine r n a separate machine. If yu will run Sage HRMS n a netwrk, the first user t lg n each machine must d a separate client install. Step 1: Install Sage HRMS n the server Nte: Yu must have administratr privileges t install this prduct. 1. At the server machine, pen the Sage HRMS installatin package. If yu are using Sage HRMS with Micrsft SQL Server 2008, SQL Server 2008 R2, SQL Server 2012 (Standard r Enterprise Editins), SQL Server 2012 R2, and the SQL Server is installed, prceed t number 6 belw. If yu yu d nt already have SQL Server Express Editin installed, prceed t number 2. Nte: SQL Server Express Editin is a free dwnlad frm Micrsft, but we recmmend yu have n mre than 500 emplyees if using this editin. The Prfiler feature is nt available in this editin. 2. Visit www.micrsft.cm and use the search t find SQL Server Express (a free dwnlad). 3. Once yu have the dwnlad file saved t yur server, access it lcally (nt frm the netwrk), right-click the SQLEXPR*.exe file, and select t Run as administratr. 4. Select Install SQL Server Express Editin and prceed with the installatin. The system checks fr, and if necessary, installs prerequisites fr installatin (such as Windws Installer,.NET Framewrk, and MDAC 2.8) befre it begins installing SQL Server Express editin. 5. When the SQL Server Express Editin installatin is cmplete, restart yur server. 6. Open the Sage HRMS installatin package frm Sage, right-click the setup.exe file, and chse Run as administratr. Sage HRMS 2015 Installatin Guide - 7
Installing Sage HRMS If yu receive a prmpt regarding which accunt t use t run the prgram, clear the check bx next t Run this prgram with restricted access and click OK. Imprtant! Yu must save this installatin package unzipped t a lcatin where it cannt be deleted. This is key fr yur quarterly and future prduct updates. 7. Click Next when the Sage HRMS Installer welcme windw pens. 8. Review the Sage End User License Agreement in the License Agreement windw, accept the terms, and click Next. 9. Enter yur User Name and Organizatin n the Custmer Infrmatin windw, and click Next. 10. Click Next t accept the default destinatin flder where the Sage HRMS Server will be installed; therwise click Change and select anther destinatin. 11. Enter the required infrmatin in the SQL Setup windw. As yu enter infrmatin, nte the fllwing: Server, User, Passwrd If yu are using SQL Server Express, enter <SQLServerName\Instance Name> fr the Server Name, then enter sa in the User Name field and the passwrd fr the sa accunt in the Passwrd field. If yu are using SQL Server, enter the <SQLServerName>, User Name, and Passwrd in the crrespnding fields. The SQL Server lgn must be included in the administratr grup. D nt use lcalhst fr the server name if yu plan t install remte clients. Databases Perids are nt permitted in database names. Database names cannt have mre than 14 characters. The databases displayed are the default SQL databases that are installed. SageHRMS_ Live and SageHRMS_System are bth required. Optinally, the sample databases can be installed. Sample data allws yu t practice in the system using data frm a simulated cmpany. It des nt affect yur live cmpany data. 12. Select the Install Sample Data check bx if yu want t include sample data with yur installatin. Three sets f sample data are installed: Sage HRMS 2015 Installatin Guide - 8
Installing Sage HRMS Sample Database is the sample HR database. Sample Payrll Database is the sample U.S. Payrll database. Sample Canadian Payrll Database is the sample Canadian Payrll database. Nte: When yu select the Install Sample Data check bx, the system installs all three sets f sample data, regardless f yur cnfiguratin. An advantage f having access t all three sets f sample data includes access t the Help fr each cnfiguratin. Yu can als practice cmplex prcesses in the sample data befre trying it ut n yur real data. 13. Click Next t establish a cnnectin with the server. If yu receive a message that the server name, user name, r passwrd are invalid, verify that yur entries are crrect. If yu are installing fr SQL Server Express and yu did nt restart yur system befre installing Sage HRMS, restart yur server, and begin the Sage HRMS installatin again. 14. Use the Ready t Install the Prgram windw t verify yur settings are crrect, then click Install. 15. When the server installatin is cmplete, click Finish n the Install Cmpleted windw. 16. If prmpted, restart yur system. 17. Frm Windws Explrer, g t the destinatin flder where yu installed the server (the default lcatin is C:\PrgramData\Sage\SageHRMSServer), and set yur sharing settings as fllws: a. Right-click the SageHRMSServer flder and select Prperties. b. Click the Sharing tab and Share the flder. Yu may be required t click the Advanced Sharing buttn t prceed depending n yur system. Set the Permissins fr users wh access Sage HRMS ver the netwrk n the shared flder t Allw Full Cntrl. c. Make sure the flder s Share Name des nt cntain a space. Fr example, use SageHRMSServer as a share name instead f Sage HRMS Server. 18. Click Apply and then OK t clse. Step 2: Enable Server Prtcls and the SQL Brwser Service Befre yu install a client, t ensure the SQL Server is prperly set up, yu must enable prper prtcls n the server and enable the SQL Brwser Service. Sage HRMS 2015 Installatin Guide - 9
Installing Sage HRMS T enable Server Prtcls 1. Open the SQL Server Cnfiguratin Manager. Depending n yur Micrsft SQL Server versin (2008, r 2012), this may be frm the Start menu > All Prgrams > Micrsft SQL Server > Cnfiguratin Tls > SQL Server Cnfiguratin Manager. 2. Frm the left panel, expand SQL Server Netwrk Cnfiguratin and SQL Native Client Cnfiguratin. 3. Click Prtcls/Client Prtcals. 4. Set the Shared Memry, TCP/IP, and Named Pipes prtcls t Enabled. Fr the purpse f client installs, the status f the VIA prtcl des nt matter. T enable the SQL Brwser Service 1. Frm the SQL Server Cnfiguratin Manager, select SQL Server Services. 2. Frm the left panel, highlight SQL Server Service. 3. Verify the Service name SQL Server (MSSQLSERVER) Startup type field is set t Autmatic and that Service status field is Running. If it is nt running, yu must Start the service. 4. Select All Prgrams > Administrative Tls>Services. 5. Highlight SQL Server Brwser. 6. Change the Startup type frm Disabled t Autmatic and click Apply. 7. Under SQL Server Services, select and Start the SQLBrwser service. 8. Click OK t clse the windw. 9. G t All Prgrams > Administrative Tls > Cmputer Management t pen the Cmputer Management windw. 10. Frm the Services and Applicatins sectin, select Services and scrll t the SQL Server entries. 11. Verify that bth the SQL Server and SQL Server Brwser services are set t Started and Autmatic. 12. Clse the Cmputer Management windw. Sage HRMS 2015 Installatin Guide - 10
Installing Sage HRMS Step 3: Install the Sage HRMS client If yu are perating Sage HRMS n the server machine, yu must als install a client n that server machine. Additinally, client installs nly need t be dne fr the first install f Sage HRMS client. Befre installing the client Administratr privileges are required t install these cmpnents. If yu are nt a member f the administratrs grup and yu are installing n Windws 7, Windws 8, Windws Server 2008, r Windws Server 2012, yu will be required t enter an administratr user accunt and passwrd befre yu can cntinue. T install the Sage HRMS client 1. If yu are installing a client n the server machine, yu can start the client installatin using the shrtcut Sage HRMS Client Install placed n the desktp frm the server installatin. Or, at the client machine, g t the shared flder n the server (either by using a UNC path r by creating a mapped drive). Frm the Client flder, right-click the setup.exe file, and select t Run as administratr. 2. The Windws Installer and client installatin begins. If a required cmpnent is nt fund n yur machine, a windw lists the missing required cmpnents. Imprtant! If yu have nt already installed Micrsft.NET Framewrk 3.5, yu will be prmpted t d s befre yu can prceed with the client installatin. 3. Click Install t start installing the required cmpnents. 4. If prmpted t restart yur cmputer, restart immediately and nt later. 5. After restarting, the Sage HRMS Client Install Welcme windw pens. Click Next t cntinue with the client installatin. 6. If yu are using Sage HRMS Payrll (U.S., Canadian, r bth), fllw the prmpts t install the payrll mdules and restart Sage HRMS when finished. Nte: The payrll mdule requires administratr privileges t install. 7. When prmpted, select the Launch Sage HRMS Client check bx and click Finish. Sage HRMS 2015 Installatin Guide - 11
Installing Sage HRMS 8. When prmpted, register yur sftware and enter the Serial Number and Installatin Cde prvided by Sage when yu purchased the prduct. Registratin is required nly n the first client installatin. 9. If yu want t add the Sage 100 Standard ERP Link, Sage 100 Advanced ERP G/L Link, Sage 500 ERP G/L Link, r Sage ERP X3 G/L Interface, select the assciated check bxes and click OK. 10. Click OK t update yur files and restart again if prmpted. The Sage HRMS Lgn windw appears when the file update and restart are cmplete. Step 4: Install SAP Crystal Reprts SAP Crystal Reprts Designer SAP Crystal Reprts 2011 Designer is prvided as a cmpnent f Sage HRMS2015. The Designer versin prvides the ptin t create, mdify, and use custm and ad hc reprts in Sage HRMS. Withut installing this additinal cmpnent, yu can still view and print standard reprts in Sage HRMS but yu cannt mdify them. Installing SAP Crystal Reprts 2011 T install SAP Crystal Reprts, visit the Knwledgebase (https://supprt.na.sage.cm) and search fr Article ID 50162. Fllw the steps in the article t dwnlad and install the prgram. Sage HRMS 2015 Installatin Guide - 12
Upgrading Sage HRMS This chapter walks yu thrugh upgrading yur Sage HRMS 2014 t Sage HRMS 2015. T familiarize yurself with this prcess and make sure yu have all the requirements, please read all the steps befre yu start the upgrade. Imprtant! If yu are upgrading frm a versin f Sage HRMS ther than the latest release f Sage HRMS 2014, please cntact Sage HRMS Custmer Supprt at 800-829-0170 fr assistance. Step 1: Upgrade the server Yu must have administratr privileges t install this upgrade. Nte: Sample data is always verwritten during an upgrade. Live data is never verwritten. 1. Back up yur data. 2. At the server machine, pen the Sage HRMS installatin package, right-click the setup.exe file, and chse Run as administratr. 3. When the Sage HRMS Installer pens, click Install Sage HRMS. The Preparing t Install windw pens and the server upgrade prcess begins. If yu receive a prmpt regarding which accunt t use t run the prgram, clear the check bx next t Run this prgram with restricted access and click OK. 4. Click Next when the Sage HRMS Installer welcme windw pens. 5. The installatin starts and the prgress bar displays during the installatin. Fllw the prmpts t accept the terms and prceed with installatin. 6. When the server installatin is cmplete, click Finish n the Install Cmpleted windw. 7. If prmpted, restart yur system. Step 2: Upgrade the client Yu must be lgged in as a user with administratr privileges befre upgrading the clients. Fr each remte client machine accessing Sage HRMS, d the fllwing: 1. At the client machine, select Start > All Prgrams > Sage > Sage HRMS Client > Sage HRMS Client. Sage HRMS 2015 Installatin Guide - 13
Upgrading Sage HRMS Imprtant! If yu have nt already installed Micrsft.NET Framewrk 3.5, yu will be prmpted t d s befre yu can prceed with the client installatin. 2. When a message prmpts yu t perfrm the Client upgrade, click Yes. 3. When the client upgrade is cmplete, yu will be prmpted t restart Sage HRMS befre prceeding. If Yu Are Nt Installing Sage HRMS Payrll 4. The Update windw pens after clicking Finish. Click OK t update yur files. 5. When file update is cmplete, the Sage HRMS Lgn windw appears. 6. Select Use Windws Lgn if yu are using Windws authenticatin t lg n. Otherwise, enter a user name and passwrd and click Lgn. 7. Click OK when prmpted t update yur files. 8. Installatin is nw cmplete fr nn-payrll systems. If Yu Are Installing Sage HRMS Payrll 4. The payrll mdules windw pens after yu click Finish. Click Yes t install the payrll mdules (yu must have administratr privileges). 5. When the payrll mdules installatin is cmplete, the Update windw pens. Click OK t update yur files. 6. Sage HRMS is launched, the files are updated, and the Lgn windw appears. Step 3: Install SAP Crystal Reprts 2011 SAP Crystal Reprts Designer SAP Crystal Reprts 2011 Designer is prvided as a cmpnent f Sage HRMS2015. The Designer versin prvides the ptin t create, mdify, and use custm and ad hc reprts in Sage HRMS. Withut installing this additinal cmpnent, yu can still view and print standard reprts in Sage HRMS but yu cannt mdify them. Sage HRMS 2015 Installatin Guide - 14
Upgrading Sage HRMS Installing SAP Crystal Reprts 2011 T install SAP Crystal Reprts, visit the Knwledgebase (https://supprt.na.sage.cm) and search fr Article ID 50162. Fllw the steps in the article t dwnlad and install the prgram. Nte: SAP Crystal Reprts Designer versin 2008 (prvided with Sage HRMS 2014) is nt supprted with Sage HRMS2015. After upgrading If yu have custm applicatins yu must designate their lcatin. Fllw the steps belw t use the Abrawin.ini file t lcate the custm applicatins. 1. On the server machine, create a flder where yur custm r third-party applicatins will be lcated. 2. Install yur custm r third-party applicatins int this flder. 3. Open the Abrawin.ini file (lcated in the \SageHRMSServer flder) and add a [Sage HRMS] sectin that designates the path t the custm applicatins flder. Fr example, the fllwing tw lines added t the Abrawin.ini file will direct Sage HRMS t search the Third Party Apps flder fr the custm applicatins installed in the flder. (Sage HRMS will search nly in the rt path, nt in sub-flders.) [Sage HRMS]CustmApps = C:\Sage HRMS\Third Party Apps\ Sage HRMS 2015 Installatin Guide - 15
Cnverting frm Sage Abra Suite This chapter discusses the prcedures fr cnverting yur HR-nly Visual FxPr database in Sage Abra Suite t SQL Server database in Sage HRMS. Only Sage Abra Suite versin 9.2 can be cnverted t Sage HRMS 2012. Once Sage HRMS 2012 is installed, yu can upgrade t Sage HRMS 2015. Imprtant! Due t the cmplexity f cnverting yur Sage Abra Suite data t Sage HRMS, it is critical that yu get help frm Sage HRMS Prfessinal Services Grup r yur certified business partner with this prcess. Custmer Supprt cannt assist with this cnversin prcess. If yu attempt this prcess withut help frm a certified cnsultant r Sage Prfessinal Services Grup (PSG), it is utside f the scpe f supprted installatins. The cnversin prcedures cnsist f installing Sage HRMS, cnverting yur existing Sage Abra Suite Visual FxPr data t Sage HRMS SQL Server data, and changing the data surce fr custm reprts frm Abra Data Access t Sage HRMS Data Access. T cnvert frm Sage Abra Suite versin 9.2 Nte: Yu must have administratr rights t install this upgrade and perfrm the cnversin. 1. Install Sage HRMS. See Installing Sage HRMS. Yu must install the server as well as all remte clients. Yu can install Sage HRMS n the same server machine as yur Sage Abra Suite versin (this is called a side-by-side). 2. When server and client installatins are cmplete, yu must nw upsize yur data. This cnverts yur HR-nly database frm Visual FxPr t SQL Server. See Using the Upsize Wizards fr FxPr t SQL Server Cnversin. 3. If yu are using Abra Link r custm Visual FxPr databases (such as fr third-party applicatins), yu must nw upsize yur Abra Link and custm data. See Using the Upsize Wizards fr FxPr t SQL Server Cnversin. 4. If yu created custm reprts in Sage Abra Suite, yu must update the reprting data surce frm Sage Abra Suite Data Access t Sage HRMS Data Access. See Upsizing Sage Abra Suite Custm Reprts. Sage HRMS 2015 Installatin Guide - 16
Cnverting frm Sage Abra Suite Upsizing FxPr database t SQL Server The Sage HRMS Data Upsizing Wizard cnverts an HR and Time Off-nly Sage Abra Suite (Visual FxPr) database t a SQL Server r SQL Server Express Editin database. If yur system includes Sage Abra Suite Payrll, the Upsize Wizard updates the payrll data fr archival purpses and the data cannt be used as is in Sage HRMS Payrll. Cntact Sage HRMS Prfessinal Services Grup r yur certified business partner fr assistance with cnverting yur payrll database t Sage HRMS. Database structure changes When yu run the Data Upsizing Wizard, the structure f the database changes as fllws: An integer type field named ID_Cl is added t all tables that are autmatically ppulated. The field value increments by ne each time a new recrd is added. All date types are cnverted t date/time types. T avid cnflict with T-SQL, all field names that are T-SQL-reserved wrds (desc, rule, table, and grup), are cnverted t fdesc, frule, ftable, and fgrup. When upsizing t a SQL Server r SQL Server Express database: The Custm Details tables in the custm flder (such as TKSCREEN.DBF and TKTABLES.DBF) are added t the database. If any errrs ccur during the upsize, a message is displayed when the upsize is finished. If the table already exists in the target database, it is drpped and upsized again. The table belw shws the data type cnversins frm Visual Fx Pr t SQL Server. Sage HRMS 2015 Installatin Guide - 17
Cnverting frm Sage Abra Suite VFP data type SQL Server data type character numeric integer date lgical mem general char flat int date/time (All empty dates are cnverted t NULLs) bit text image T run the Data Upsizing Wizard 1. Cntact Sage HRMS Custmer Supprt t request the Data Upsizing Wizard applicatin. 2. Once yu have the.exe file, right-click and Run as Administratr t launch the Upsizing Wizard. 3. Select SQL Server as the database destinatin. 4. In the Database flder t upsize frm field, select the lcatin f the database flder yu want t cnvert. 5. In the Temprary wrking flder field, select the lcatin f the flder t use fr the intermediary files needed during the cnversin. The default is C:\Temp\UpsizeWiz\. 6. Enter the fllwing infrmatin and then click Test SQL Cnnectin t make sure the cnnectin is valid. Nte that the defaults display as a result f the installatin, but yu can change them if necessary. Server. This is stred in the Abrawin.ini file. Database name.this is the Live database name stred in the Abrawin.ini file. User ID. This is stred in the DBAccunt.ini file. Passwrd. This is stred in the DBAccunt.ini file and is displayed as asterisks. Select the Pht Settings tab and set the lcatin fr yur emplyee phts. Sage HRMS 2015 Installatin Guide - 18
Cnverting frm Sage Abra Suite 7. Click Start t begin the upsize prcess. The prgress f the data upsizing is cnveyed by tw status bars. The first ne represents the specific table being cnverted; the secnd ne represents all tables in the database being cnverted. 8. When upsizing is cmplete, click OK. Upsizing Sage Abra Suite custm reprts This sectin applies t custm reprts created with Sage Abra Suite. When yu upgrade t Sage HRMS, yu must change the data surce fr each reprt and save it t a new flder. Befre yu upsize reprts Yu must have Sage HRMS and SAP Crystal Reprts 2011 installed. SAP Crystal Reprts 2011 Designer is prvided as a cmpnent f Sage HRMS 2015. The Designer versin prvides the ptin t create, mdify, and use custm and ad hc reprts in Sage HRMS. Withut installing this additinal cmpnent, yu can still view and print standard reprts in Sage HRMS but yu cannt mdify them. T install SAP Crystal Reprts, visit the Knwledgebase (https://supprt.na.sage.cm) and search fr article ID 50162. Fllw the steps in the article t dwnlad and install the prgram. Yu must have already used the Data Upsizing Wizard t upsize yur HR and Time Off data. Changing the data surce 1. Lg n t Sage HRMS. Yu must als lg n t Sage Abra Suite, because the data surce in the reprts yu are upgrading still references the ADA (Abra Data Access). 2. Frm the Sage HRMS Quick Launch tlbar, click Crystal > Crystal Reprts t launch SAP Crystal Reprts. The Welcme t Crystal Reprts windw pens. 3. Open ne f yur custm reprts. 4. Frm the SAP Crystal Reprts main menu, select Database > Set Datasurce Lcatin. The Set Datasurce Lcatin windw pens. Nte: If Sage HRMS Data Access has been created under OLE DB (ADO), select Sage HRMS Sage HRMS 2015 Installatin Guide - 19
Cnverting frm Sage Abra Suite Data Access, and click Update. Repeat fr subreprts if needed. If a field name has changed, prceed t the Field Name Changes sectin f this dcument. 5. In the Replace With sectin, click the plus sign t expand Create New Cnnectin. 6. Click the plus sign t expand OLE DB (ADO). 7. Duble-click Make New Cnnectin. 8. The OLE DB (ADO) windw pens. Click nce t highlight Sage HRMS Data Access (OLE DB Prvider). 9. Click Finish. The Set Datasurce Lcatin windw pens. 10. In the Replace With sectin, click nce t highlight Sage HRMS Data Access. 11. In the Current Data Surce sectin, click nce t highlight Abra Data Access. 12. Click Update t update the ld Sage Abra Suite data surce with the new Sage HRMS data surce. Nte: In the tp sectin, yu must select the data surce t change frm, and in the bttm sectin yu must select the data surce t change t befre yu Update. 13. In the Create New Cnnectin/OLE DB flder, right-click Sage HRMS Data Access and select Add t Favrites. 14. Repeat Steps 3 thrugh 13 fr each custm reprt and subreprt. Depending n the cmplexity f yur reprt, yu may als need t change field names that are T-SQL reserved wrds, such as desc, rule, table, and grup, and check fr empty dates. Field name changes In rder t cntinue using yur SAP Crystal Reprts custm reprts, yu must change the field name fr all fields that cnflict with keywrds in T-SQL. The new fields are named the same as the ld, but with an F prefix. The table belw shws the field name changes in the Sage HRMS database. Table Sage HRMS field name T-SQL reserved wrd HBEPLAN FDESC DESC SYREPORT FGROUP GROUP SYSCHED FDESC DESC Sage HRMS 2015 Installatin Guide - 20
Cnverting frm Sage Abra Suite Table Sage HRMS field name T-SQL reserved wrd HRTABLES FDESC DESC HRTABLES FRULE RULE HRTABLES FTABLE TABLE TKTABLES FDESC DESC GENEMAIL FDESC DESC OEBEPLAN FDESC DESC If yur reprt requires field name changes, when yu update the data surce the Map Fields windw pens. 1. Click nce t highlight the ld field name in the Unmapped Fields sectin. In the right bx, click nce t highlight the new field name. Fr example, if yur reprt uses desc, select desc in the left bx and fdesc in the right bx. 2. Click Map. 3. Preview the reprt. If yu receive a message stating that ne r mre database tables have changed, click OK. Checking fr empty dates In Sage HRMS, all date fields withut a specific date assigned are nw NULL. If yu have any reprts in which yu check fr an empty date in a selectin frmula using the EMPTY() functin, yu need t nw use the ISNULL() functin. The example belw shws selecting benefit recrds in the HBENE table. Befre: {hbene.b_beneid} in ["S", "I"] and {hrpersnl.p_active} = "A" and (EMPTY({hbene.b_expdate}) r {hbene.b_expdate} > CurrentDate) After: {hbene.b_beneid} in ["S", "I"] and {hrpersnl.p_active} = "A" and (ISNULL({hbene.b_expdate}) r {hbene.b_expdate} > CurrentDate) Sage HRMS 2015 Installatin Guide - 21
Uninstalling Sage HRMS 2015 T cmpletely uninstall Sage HRMS 2015, yu must uninstall the clients and the server. If yur system includes Sage HRMS Payrll, there are several mdules that will als be uninstalled with the prcess. Belw is a list f the prgrams that are installed fr an HR/Payrll system. Only the first tw prgrams, Sage HRMS Client and Sage HRMS Server, are installed fr bth HR and Payrll. The remaining prgrams are the payrll mdules. Sage HRMS Client Sage HRMS Server Sage HRMS Payrll Bank Mdule Sage HRMS Payrll General Ledger Mdule Sage HRMS Payrll Sync Sage HRMS Payrll System Manager Sage HRMS Payrll (U.S. r Canadian) Payrll Mdule Sage HRMS Payrll (U.S. r Canadian) Tax Mdule T uninstall Sage HRMS, remve the prgrams in the rder listed. Yu can nly use the Add/Remve Prgrams functin t uninstall the Sage HRMS applicatin. Yu cannt use setup.exe t uninstall. Yu must have administratr privileges t uninstall. T uninstall Sage HRMS 1. G t Add/Remve Prgrams (frm the Cntrl Panel, depending n yur perating system). 2. Remve Sage HRMS Client. Nte: When the client is uninstalled, all Sage HRMS Payrll mdules are als autmatically uninstalled. 3. Remve Sage HRMS Server. 4. Repeat steps 2 and 3 fr all applicable prgrams in the rder listed abve. Sage HRMS 2015 Installatin Guide - 22
Appendix Verifying database cnnectins Use the Database Cnnectin Tl t: Verify an existing database cnnectin. Change existing infrmatin in rder t establish a cnnectin with a different server if yu mve yur Sage HRMS database. T use the Database Cnnectin Tl 1. Frm the Start menu n the server, select All Prgrams > Sage > Sage HRMS Server > Database Cnnectin Tl. 2. In the Database Cnnectin Tl windw, enter yur server name, user ID, and passwrd. Yu must prvide a SQL Server lgn that has been given administratr privileges. 3. Enter the names f yur Live Database and Sample Database, and if yu are using Payrll, the Payrll System Database and Payrll Sample Database. If yu are using Payrll, enter the User ID and Passwrd fr the payrll link. 4. Click Test Cnnectins t test fr valid cnnectins t the databases. If all cnnectins are successful, the test results display Successful. If yu receive a message that the cnnectins failed, verify yur entries are crrect. 5. Click OK t return t the Database Cnnectin Tl windw and click Save t establish yur database cnnectins. Re-registering Sage HRMS t add a mdule r ptin If yu have an existing Sage HRMS system and want t add anther mdule r ptin, simply reregister Sage HRMS. If yu are adding U.S. Payrll r Canadian Payrll yu must set up the payrll database. Fr mre infrmatin, refer t the Sage HRMS Payrll Getting Started Guide. Ntes: Sage HRMS 2015 Installatin Guide - 23
Appendix Changing the serial number r installatin cde requires yu restart Sage HRMS. If yu add U.S. Payrll t a Canadian Payrll system r add Canadian Payrll t a U.S. Payrll system, yu must change the Cuntry setting t Bth after re-registering and restarting Sage HRMS. Frm the navigatin pane, g t Setup > System > Setup > Enterprise Setup t change the Cuntry setting. Yu need yur serial number and installatin cde t add new items t yur system. If yu dn't have this infrmatin, call Sage HRMS Custmer Service, Mnday thrugh Friday frm 8:30 a.m. t 5:30 p.m. ET at 800-424-9392. T re-register Sage HRMS 1. Launch Sage HRMS. 2. Select Register Sage HRMS frm the Help menu. 3. The Register Sage HRMS windw pens. This windw shws yur current serial number and installatin cde. If yu are re-registering t add anther mdule, ptin, r link, enter yur new serial number and installatin cde. If yu want t add the Sage 100 Standard ERP Link, Sage 100 Advanced ERP G/L Link, Sage 500 ERP G/L Link, r Sage ERP X3 G/L Interface, select the assciated check bxes. 4. Click OK t cmplete the registratin and clse Sage HRMS. A message prmpts yu t restart Sage HRMS. 5. Launch Sage HRMS and then lg n. The main menu and navigatin pane reflect the new ptins and mdules as registered. Nte: When yu add a link r interface, they becme accessible frm the Quick Launch tlbar. 6. T keep yur system secure, review yur user and grup security and make any necessary changes fr the new prducts r ptins yu installed. Sage HRMS 2015 Installatin Guide - 24