T h e f a m i l o f s e l f - l e v e l l i n g r o t a t i n g l a s e r s Primus-H Primus-HV Primus-HVA Precise surveing and measuring Made in German
Self-levelling rotating lasers: The Nedo -Famil The variet of tasks on the construction site require a diversit of characteristics of rotating lasers. The Primus product range offers customised solutions for levelling and alignment tasks in civil engineering and in interior outfitting. Nedo Primus stands for a robust design, a reliable technolog and the proven Nedo qualit ou can rel on. All models at a glance Horizontal Vertical AutoAlign Primus-H Primus-HV Primus-HVA + 5 Nedo Primus-H, Primus-HV and Primus-HVA are self-levelling rotating lasers. Electronic sensors control the position of the laser beam and horizontall/verticall align the laser beam b means of a servo motor. There is no need for a time-consuming manual alignment of the laser. Simpl set up the rotating laser and turn it on. All Primus models align themselves automaticall within a range of ± 5. Little vibrations of the instrument are levelled out b the intelligent control electronics. The rotating laser switches itself off when more severe vibrations occur. This avoids errors in height. Fast transition to the use in the vertical mode: The alignment and the marking of right angles are child s pla. The aluminium housing securel protects the electrical sensors and the mechanical components against splash water and dust (IP 54). Intuitive operation On/off switch; starts the selflevelling procedure. Activates the manual operation and switches off the self-levelling procedure. The laser rotates independentl from the inclination (no adjustment for vibrations). Rotating mode. Press to switch to the next standard speed: 200, 350 and 500 rpm. Use arrow kes m n for an infinite adjustment of the rotating speed. Scan mode. Press to switch to the next scan angle: approx. 0, approx. 5, approx. 10 and approx. 15. Buttons for infinite adjustment of the rotating speed or for adjustment of the scanning position (depends on mode). Page 2
Smart ideas to ease our job All Primus rotating lasers are supplied with a radio remote control as a standard. The control via radio allows for a greater distance and an easier handling compared to regular infrared remote controls. The multi function module COMMANDER combines radio remote control and laser receiver. Accessories are therefore alwas read to hand. Standard equipment: radio remote control Multi function module COMMANDER COMMANDER/COMMANDER-HVA can be clicked onto the laser during transport or when the radio remote control/laser receiver is not needed. The multi function modules are equipped with magnets. Therefore, the laser receiver can be attached ver easil to metallic profiles in ceiling constructions. Read to hand: the multi function module COMMANDER can be clicked onto the laser All Primus models are supplied with a variet of accessories depending on the field of application of each laser. The multi function module COMMANDER OUTDOOR and a bracket for the laser receiver are delivered with each Primus-H. Primus-HV and Primus-HVA are supplied with the multi function module COMMANDER/COMMANDER-HVA and the wall mount eas. Standard equipment: extensive accessor pack Page 3
for horizontal applications Nedo Primus-H -- the robust horizontal laser for the construction site Nedo Primus-H is the ideal laser for all levelling tasks in civil engineering: casting concrete surfaces, masonr works or levelling. The rotating laser levels itself horizontall at the push of a button. The highl visible laser beam facilitates tasks in a close-up range. For greater distances, the laser beam can be detected easil with the aid of the laser receiver. The splash-proof aluminium housing and the sturd rotor protection makes Nedo Primus-H an extremel robust tool. Nedo Primus-H withstands the extreme demands on the construction site without difficult. The deliver includes the splash-proof COMMANDER OUTDOOR with bracket. Nedo Primus-H is supplied with batteries or rechargeable batteries/power suppl unit. Characteristics Primus-H: Self-levelling rotating laser for horizontal applications Highl visible laser beams Extremel robust laser with aluminium housing Completel splash-proof (IP 54) Eas to handle Plumb beam Scan function Adjustable rotating speed Multi function module COMMANDER OUTDOOR (laser receiver with integrated radio remote control) Bracket for COMMANDER OUTDOOR Supplied with batteries or rechargeable batteries/power suppl unit Technical data laser: Self-levelling range ± 5 (horizontall) Laser tpe Visible, wave length 635 nm, laser class 2, max. output 1 mw Range ø 200 m Accurac ± 0.15 mm/m Rotating speed 3 determined speeds: 200, 350, 500 rpm continuous fine adjustment Scanning angle 0 (point mode), approx. 5,10,15 Housing Robust aluminium, powder-coated Dimensions (HxWxD) 165 mm x 149 mm x 126 mm Weight 1.6 kg 5/8 thread BSW Operation duration Batteries: approx. 100 h Rechargeable batteries: approx. 40 h Power suppl 2 x 1.5 V (LR20/Mono/D) Technical data laser receiver/radio remote control: Accurac ± 2 mm Range (receiver) up to approx. 100 m Range (radio remote control) up to approx. 50 m Power suppl 2 x 1.5 V (LR6/Mignon/AA) Operation duration approx. 70 h Automatic switch-off after approx. 3 min Length of detector field 68 mm 1/4 thread BSW Deliver includes: Ref.-No. 470 005 Ref.-No. 470 006 Primus-H (operated with batteries) Supplied with multi function module COMMANDER OUTDOOR (laser receiver with integrated radio remote control), bracket, batteries and case. Primus-H (operated with rechargeable batteries) Supplied with multi function module COMMANDER OUTDOOR (laser receiver with integrated radio remote control), bracket, rechargeable batteries, power suppl unit and case. Page 4
Nedo Primus-HV -- the universal rotating laser for the construction site for horizontal and vertical applications For horizontal or vertical applications, in interior outfitting or on the construction site Nedo Primus-HV is the all-purpose rotating laser for levelling and aligning. Ideal for ceiling constructors, floor laers, bricklaers and tilers. The rotating laser levels itself horizontall and verticall at the push of a button. Nedo Primus-HV is an all-rounder and stands out thanks to its functional features like the scan function, the plumb beam and the intuitive handling. Characteristics Primus-HV: Self-levelling rotating laser for horizontal and vertical applications Highl visible laser beams Extremel robust laser with aluminium housing Completel splash-proof (IP 54) Eas to handle Plumb beam Technical data laser: Self-levelling range ± 5 (horizontall and verticall) Laser tpe Visible, wave length 635 nm, laser class 2, max. output 1 mw Range ø 200 m Accurac ± 0.15 mm/m Rotating speed 3 determined speeds: 200, 350, 500 rpm continuous fine adjustment Scanning angle 0 (point mode), approx. 5, 10, 15 Housing Robust aluminium, powder-coated Dimensions (HxWxD) 165 mm x 149 mm x 126 mm Weight 1.6 kg 5/8 thread BSW Operation duration Batteries: approx. 100 h Rechargeable batteries: approx. 40 h Power suppl 2 x 1.5 V (LR20/Mono/D) Scan function Adjustable rotating speed Multi function module COMMANDER (laser receiver with integrated radio remote control) Wall mount eas Supplied with batteries or rechargeable batteries/power suppl unit Technical data laser receiver/radio remote control: Accurac ± 2 mm Range (receiver) up to approx. 100 m Range (radio remote control) up to approx. 50 m Power suppl 2 x 1.5 V (LR6/Mignon/AA) Operation duration approx. 70 h Automatic switch-off after approx. 3 min Length of detector field 68 mm 1/4 thread BSW Deliver includes: Ref.-No. 470 010 Ref.-No. 470 011 Primus-HV (operated with batteries) Supplied with multi function module COMMANDER (laser receiver with integrated radio remote control), wall mount eas, batteries and case. Primus-HV (operated with rechargeable batteries) Supplied with multi function module COMMANDER (laser receiver with integrated radio remote control), wall mount eas, rechargeable batteries, power suppl unit and case. Page 5
Nedo Primus-HVA for horizontal and vertical applications Characteristics: Nedo Primus-HVA Self-levelling rotating laser with AutoAlign function for horizontal and vertical applications in interior outfitting or outdoors. Primus-HVA features a plumb beam and a scan function as a standard. It is the ideal laser for the construction site thanks to its robust, dust and splash water protected aluminium housing. The inclination/position of the laser level can be changed or adjusted to a point with the aid of the AutoAlign function. Self-levelling rotating laser for horizontal and vertical applications AutoAlign-function Highl visible laser beams Extremel robust laser with aluminium housing Completel splash-proof (IP 54) Plumb beam Scan function Adjustable rotating speed Multi function module COMMANDER-HVA (laser receiver with integrated radio remote control) Wall mount eas Supplied with batteries or rechargeable batteries/power suppl unit Technical data laser: Self-levelling range ± 5 (horizontall and verticall) Laser tpe Visible, wave length 635 nm, laser class 2, max. output 1 mw Range ø 200 m Accurac ± 0.15 mm/m Rotating speed 3 determined speeds: 200, 350, 500 rpm continuous fine adjustment Scanning angle 0 (point mode), approx. 5, 10, 15 Working range of AutoAlign 2 m 20 m Housing Robust aluminium, powder-coated Dimensions (HxWxD) 165 mm x 149 mm x 126 mm 5/8 thread BSW Operation duration Batteries: approx. 100 h Rechargeable batteries: approx. 40 h Power suppl 2 x 1.5 V (LR20/Mono/D) Deliver includes: Ref.-No. 470 020 Ref.-No. 470 021 Primus-HVA (operated with batteries) Supplied with multi function module COMMANDER-HVA (laser receiver with integrated radio remote control), wall mount eas, batteries and case. Primus-HVA operated with rechargeable batteries) Supplied with multi function module COMMANDER-HVA (laser receiver with integrated radio remote control), wall mount eas, rechargeable batteries, power suppl unit and case. Page 6 Technical data laser receiver/radio remote control: Accurac ± 2 mm Range (receiver) up to approx. 100 m Range (radio remote control) up to approx. 50 m Power suppl 2 x 1.5 V (LR6/Mignon/AA) Operation duration approx. 70 h Automatic switch-off after approx. 3 min Length of detector field 68 mm 1/4 thread BSW
AutoAlign-function -- Time-saving in man applications Set the laser receiver with its zero mark on a point through which the laser plane must pass. The laser receiver controls the Primus-HVA with the aid of the built-in radio module: such the rotating laser beam automaticall aligns itself on this zero mark and in so doing guides the laser plane into its target. The AutoAlign function is available for both horizontal and vertical operation. The result is a variet of possible applications: Working with batter boards is child s pla: the laser beam of the Nedo Primus-HVA locates the laser receiver on the opposite side of the batter boards and keeps the laser beam on the zero mark at all times. The time-consuming manual alignment of the laser beam on the receiver opposite can be dispensed with. Alignment while laing tiles is also no problem, and the suspension of inclined ceilings is rapid and precise. The rotating laser is roughl aligned with the laser receiver. After the AutoAlign functins is started, the laser receiver automaticall guides the laser plane into its target. Once the target mark is located, the laser head retains its position. AutoAlign unbeatable in batter board applications Seite 7
Primus Accessories Wall Mount-S Ref.-No. 461 020 The adjustable Wall Mount-S is either suspended from the ceiling rails or attached to the wall using two screws. The integrated sliding unit with fine adjustment allows the laser to be set to the desired height. Adjusting range: 150 mm Weight (incl. fastening screw): 1400 g Wall Mount eas Ref.-No. 461 030 The wall mount eas is attached to a wall using two screws. It can be adjusted within the range of the integral slots. The wall mount eas is included in the Primus-HV/Primus-HVA standard equipment. Adjusting range: 150 mm Weight (incl. fastening screw): 400 g Batter Board Holder for Primus Ref.-No. 461 040 Clamping range: max. thickness of board 60 mm Weight: 900 g Batter Board Holder for Laser Receiver Ref.-No. 461 050 Clamping range: max. thickness of board 60 mm Weight: 330 g Bracket for Laser Receiver Ref.-No. 461 076 Bracket to attach the Primus laser receiver to an levelling staff. Flexi Rod with Adapter Ref.-No. 360 941 Levelling is child s pla when the flexi rod with adapter is used. Min. length: 131 cm Max. length: 242 cm Multi function module COMMANDER OUTDOOR Laser receiver with integrated radio remote control for Primus lasers. Designed for the use under toughest weather conditions. Ver robust and absolutel weatherproof (protection class IP 54). Primus-H is supplied with the multi function module COMMANDER OUTDOOR as a standard. Order information: Ref.-No. for rotating laser 430 360 Primus-H/Primus-HV 430 365 Primus-HVA Technical data radio remote control/laser receiver: Accurac + 2 mm Range of receiver up to approx. 100 m Power suppl 2 x 1,5 V batteries (AA) Operation duration approx. 70 h Automatic switch-off after approx. 3 min Length of detector field 65 mm 1/4 thread BSW Precise surveing and measuring Nedo GmbH & Co. KG Hochgerichtstraße 39-43 72280 Dornstetten German Phone: +49/7443/2401-0 Fax: +49/7443/2401-45 www.nedo.com info@nedo.com Your Nedo-Dealer Printed in German 02/06 - NP 321 010-EN