Hme Vide/Data Prjectr Cmputer Wireless Muse Dcument Camera Cntrl Panel Guest Laptp Welcme t Palm Beach State Cllege Bca Ratn Campus Use the buttns n the left t assist yu in using the Multimedia Classrm Equipment. If yu wuld like t schedule a ne-n-ne Multimedia Classrm Equipment Orientatin please fill ut the nline: Orientatin Request Frm Trublesht Micrscpe Camera Fr immediate assistance, call Media Technlgy at 561-862-4800 T reprt a prblem that is nt immediate, submit an nline Truble Reprt
Hme Data Prjectr Cmputer Wireless Muse Dcument Camera Cntrl Panel Guest Laptp Trublesht Micrscpe Camera Press the ON buttn at the tp left crner f the Cntrl Panel. Nte: Yu may hear the prjectr s fan befre seeing an image nscreen. The prjectr s lamp can take up t 60 secnds t achieve its full luminsity. 2. SELECT THE SOURCE YOU WANT TO PROJECT The tw clumns f buttns in the center f the Cntrl Panel indicate the different inputs available. 3. TURN THE DIAL ON THE SWITCH BOX TO THE INPUT YOU WANT TO PROJECT 4. ADJUST THE VOLUME If necessary, press the VOLUME +/- buttns n the Cntrl Panel t adjust the audi vlume t desired level. 5. POWER THE DATA PROJECTOR OFF Press and hld the OFF buttn at the tp left side f the Cntrl Panel fr apprximately 3 secnds r until prjectr s light turns ff. Nte: The prjectr s fan will cntinue t run after the prjectr is pwered ff t cl dwn the lamp. A cl-dwn perid f several minutes may be necessary befre prjectr can be pwered n again. Fr immediate assistance, call Media Technlgy at 561-862-4800 T reprt a prblem that is nt immediate, submit an nline Truble Reprt
Hme Vide/Data Prjectr Cmputer Wireless Muse Dcument Camera Press the ON buttn at the tp left crner f the Cntrl Panel. Nte: Yu may hear the prjectr s fan befre seeing an image nscreen. The prjectr s lamp can take up t 60 secnds t achieve its full luminsity. 2. SELECT THE CAMPUS TV INPUT 3. USE THE CHANNEL +/- ARROWS TO TUNE IN CHANNELS Cntrl Panel Guest Laptp Trublesht Nte: The Bca Ratn Campus bradcasts varius televisin statins and vides frm ur cllectin n channels 3 t 11 during nrmal MTIS hurs f peratin. The Bca Ratn Campus Inf- Channel airs n channel 13. Micrscpe Camera 4. ADJUST THE VOLUME If necessary, press the VOLUME +/- buttns n the Cntrl Panel t adjust the audi vlume t desired level. *ALWAYS POWER OFF EQUIPMENT AFTER USE* Fr immediate assistance, call Media Technlgy at 561-862-4800 T reprt a prblem that is nt immediate, submit an nline Truble Reprt
Hme Vide/Data Prjectr Cmputer Wireless Muse Dcument Camera Cntrl Panel Guest Laptp Trublesht Micrscpe Camera Press the ON buttn at the tp left crner f the Cntrl Panel. Nte: Yu may hear the prjectr s fan befre seeing an image nscreen. The prjectr s lamp can take up t 60 secnds t achieve its full luminsity. 2. SELECT THE APPROPRIATE DVD OR VCR INPUT 3. USE THE RIGHT SIDE OF THE CONTROL PANEL AS THE REMOTE CONTROL FOR EACH DEVICE T Play a DVD: Press the Open/Clse buttn n the frnt f the deck then place the DVD n the tray. Press the Open/Clse buttn again t clse the DVD tray. Then yu can Play/Pause, rewind, stp and fast frward using the buttns listed n the lwer right side f the Cntrl Panel. When finished playing the DVD yu can press the Open/Clse buttn n the deck and the DVD tray will pen and yu can remve the DVD. T Play a VHS Tape: Insert the VHS tape int deck. After tape is laded yu can Play/Pause, rewind, stp and fast frward using the buttns listed n the lwer right side f the Cntrl Panel. When finished playing the VHS tape yu can press the Eject VHS buttn n the deck and the tape will be ejected. 4. ADJUST THE VOLUME If necessary, press the VOLUME +/- buttns n the SP Cntrl Panel t adjust the audi vlume t desired level. *ALWAYS POWER OFF EQUIPMENT AFTER USE* Fr immediate assistance, call Media Technlgy at 561-862-4800 T reprt a prblem that is nt immediate, submit an nline Truble Reprt
Hme Vide/Data Prjectr Cmputer Wireless Muse Dcument Camera Cntrl Panel Guest Laptp Trublesht Micrscpe Camera Press the ON buttn at the tp left crner f the Cntrl Panel. Nte: Yu may hear the prjectr s fan befre seeing an image nscreen. The prjectr s lamp can take up t 60 secnds t achieve its full luminsity. 2. SELECT THE COMPUTER INPUT Yu may als need t pwer ON the cmputer inside the multimedia cabinet. 3. TURN THE DIAL ON THE SWITCH BOX TO THE COMPUTER INPUT LOG INTO THE COMPUTER USING YOUR PALM BEACH STATE COLLEGE USER NAME AND PASSWORD. Nte: If yu are unable t lg in r if yu have ther cmputer-related prblems, please cntact the IT Helpdesk at 561-868-3100. 4. SELECT THE COMPUTER INPUT ON THE FACE OF THE DOCUMENT CAMERA Nte: In sme classrms the dcument camera and cmputer bth utilize the RGB input. In rder t see the cmputer image nscreen, it is necessary fr the dcument camera t be pwered n and the PC buttn t be selected (it will be illuminated in green). 5. ADJUST THE VOLUME If necessary, press the VOLUME +/- buttns n the Cntrl Panel t adjust the audi vlume t desired level. Cmputer Audi Icn Cmputer Audi Adjustment Tab Muted Cmputer Audi Nte: If yu dn t hear any audi r if the vlume is nt lud enugh, please verify that the cmputer audi is nt muted r turned dwn. T d this, click the speaker icn in the lwer right crner f the cmputer screen. The vlume cntrl tab will appear nscreen and may be unmuted and/r adjusted. *ALWAYS POWER OFF EQUIPMENT AFTER USE* Fr immediate assistance, call Media Technlgy at 561-862-4800 T reprt a prblem that is nt immediate, submit an nline Truble Reprt
Hme Vide/Data Prjectr Cmputer Wireless Muse Verify the cmputer is pwered ON then lg in with yur Palm Beach State Cllege user ID and Passwrd. T use the LASER Pinter: Press and hld dwn the LASER Pinter buttn n the Wireless Muse. T advance slides in PwerPint: Open PwerPint presentatin and run SLIDE SHOW. Press the RIGHT arrw t advance t the next slide. Dcument Camera Cntrl Panel Guest Laptp Trublesht Micrscpe Camera Press the LEFT arrw t g back a slide. The wireless muse will lk like ne f these tw mdels Fr immediate assistance, call Media Technlgy at 561-862-4800 T reprt a prblem that is nt immediate, submit an nline Truble Reprt
Hme Vide/Data Prjectr Cmputer Wireless Muse Dcument Camera Cntrl Panel Guest Laptp Trublesht Micrscpe Camera Press the ON buttn at the tp left crner f the Cntrl Panel. Nte: Yu may hear the prjectr s fan befre seeing an image nscreen. The prjectr s lamp can take up t 60 secnds t achieve its full luminsity. 2. SELECT THE DOCUMENT CAMERA INPUT 3. TURN THE DIAL ON THE SWITCH BOX TO THE INPUT YOU WANT TO PROJECT 4. SELECT THE CAMERA INPUT ON THE FACE OF THE DOCUMENT CAMERA Nte: In sme classrms the dcument camera and cmputer bth utilize the RGB input. In rder t see the dcument camera image nscreen, it is necessary fr the dcument camera unit t be pwered n and the CAMERA buttn t be selected (it will be illuminated in green). 5. ADJUST THE DOCUMENT CAMERA SETTINGS IF NECESSARY At this pint yu may want t: Adjust the arm if the bject yu are displaying is shrt/tall. Adjust the camera lens and switch n the light ptins if needed. Aut-fcus n the image being displayed. Experiment with different image ptins available n the cntrl panel at the base f the dcument camera. Examples f items that can be prjected: Textbks, papers, bjects, verhead transparencies (t display transparencies yu will need t put a piece f white paper underneath r use the base lamp). *ALWAYS POWER OFF EQUIPMENT AFTER USE* Fr immediate assistance, call Media Technlgy at 561-862-4800 T reprt a prblem that is nt immediate, submit an nline Truble Reprt
Hme Vide/Data Prjectr Cmputer Wireless Muse Dcument Camera Cntrl Panel Guest Laptp Trublesht Micrscpe Camera 1. POWER ON and POWER OFF BUTTONS ARE LOCATED ON TOP LEFT SIDE OF CONTROL PANEL Nte: Yu may hear the prjectr s fan befre seeing an image nscreen. The prjectr s lamp can take up t 60 secnds t achieve its full luminsity. The prjectr s fan will cntinue t run after the prjectr is pwered ff t cl dwn the lamp. A cldwn perid f several minutes may be necessary befre prjectr can be pwered n again. 2. SELECT THE SOURCE YOU WANT TO PROJECT The tw clumns f buttns in the center f the Cntrl Panel indicate the different inputs available. 3. IF USING THE INSTRUCTOR S PC, CONNECTING A LAPTOP, OR USING THE DOCUMENT CAMERA, YOU WILL ALSO NEED TO TURN THE DIAL ON THE SWITCH BOX TO THE INPUT YOU WANT TO PROJECT 4. ADJUST THE VOLUME If necessary, press the VOLUME +/- buttns n the Cntrl Panel t adjust the audi vlume t desired level. 5. USE BUTTONS ON THE RIGHT SIDE OF THE CONTROL PANEL AS THE REMOTE CONTROL FOR FEATURES (PLAY, PAUSE, FAST-FORWARD, REWIND, ETC. 6. CHANNEL TUNER BUTTONS FOR ARE ON THE LOWER RIGHT SIDE OF THE CONTROL PANEL OTHER FEATURES SUCH AS 7. EJECT AND 8. BLANK (I.E. VIDEO MUTE) ARE LOCATED ALONG THE BOTTOM CENTER PART OF THE CONTROL PANEL YOU MAY ALSO PRESS THE TECHNICAL ASSISTANCE. BUTTON FOR MEDIA PERSONNEL IN-PERSON
Hme Vide/Data Prjectr Cmputer Wireless Muse Dcument Camera Cntrl Panel Guest Laptp Trublesht Micrscpe Camera 1. FIND THE VGA CABLE ON THE DESKTOP WITH A TAG MARKED LAPTOP 2. CONNECT THE END OF THE VGA CABLE TO THE VGA PORT ON YOUR LAPTOP Nte: This cnnectin is generally blue r black in clr. Make sure yu align pins as yu cnnect them. The VGA prt is usually fund n the back r side f the laptp. Nte: Bth ends f the VGA cable must be cnnected prir t pwering n bth devices. Nte: If yu re using a Mac laptp r ther device that des nt have a VGA cnnectin the presenter will need t prvide the adapter t cnnect t the classrm VGA cable. 3. IF YOUR PRESENTATION INCLUDES AUDIO, CONNECT THE MINI AUDIO CABLE TO THE HEADPHONE JACK ON THE LAPTOP 4. TURN THE SWITCH BOX TO LAPTOP INPUT 5. POWER ON THE DATA PROJECTOR 6. SELECT THE LAPTOP INPUT ON THE SP CONTROL PANEL 7. LOG INTO THE COMPUTER USING YOUR PALM BEACH STATE COLLEGE USER NAME AND PASSWORD NOTE: If n image displays n wall screen, use Fn + LCD n yur laptp. Fr immediate assistance, call Media Technlgy at 561-862-4800 T reprt a prblem that is nt immediate, submit an nline Truble Reprt
Hme Vide/Data Prjectr Please see belw fr basic trubleshting tips: If yu cannt see cmputer r image n the wall screen: Verify that the SP Cntrl panel is n the prper INPUT fr the device yu are trying t use. NOTE: If using the instructr s PC make sure the Switch Bx is n Cmputer (nt Laptp r Dcument Camera). Cmputer Wireless Muse Dcument Camera Cntrl Panel Guest Laptp Trublesht Micrscpe Camera Cannt turn data prjectr n r ff: If yu see 2 red lights n the prjectr itself, it culd be lcked up r the lamp may need t be replaced. Please press the HELP buttn n the SP Cntrl Panel r cntact MTIS at 561-862-4800 fr service. Wireless muse is nt advancing slides r laser pinter nt visible: N Audi Wireless Muse remte culd be ut f sync r batteries may need t be replaced. NOTE: If yu remve the batteries and try t replace them the remte may still nt wrk unless its synced by MTIS. Please cntact MTIS at 561-862-4800 fr service. Verify that the data prjectr audi is nt all the way dwn. If using the cmputer, make sure the audi is nt muted. The cmputer s audi cntrl icn will be at the bttm right crner f the mnitr. YOU MAY ALSO PRESS THE BUTTON LOCATED ON THE CONTROL PANEL FOR MEDIA PERSONNEL IN-PERSON TECHNICAL ASSISTANCE. Fr immediate assistance, call Media Technlgy at 561-862-4800 T reprt a prblem that is nt immediate, submit an nline Truble Reprt
Hme Vide/Data Prjectr Cmputer Wireless Muse Dcument Camera Cntrl Panel Press the ON buttn at the tp left crner f the Cntrl Panel. Nte: Yu may hear the prjectr s fan befre seeing an image nscreen. The prjectr s lamp can take up t 60 secnds t achieve its full luminsity. 2. SELECT THE VCR INPUT 3. POWER ON AND ADJUST MICROSCOPE AS NECESSARY Adjust the micrscpe slide, light, and fcus settings while lking thrugh the micrscpe s viewfinder. 4. PRESS THE INPUT SELECT BUTTON ON THE REMOTE CONTROL TO CHOOSE THE L1 INPUT Guest Laptp Trublesht *ALWAYS POWER OFF EQUIPMENT AFTER USE* Micrscpe Camera Fr immediate assistance, call Media Technlgy at 561-862-4800 T reprt a prblem that is nt immediate, submit an nline Truble Reprt