I-7520 RS-232 to RS-485 Converter I-7510 RS-485 Repeater RS-232 RS-485 I-7000 SERIES Common Specifications Isolation voltage: 3000VDC Speed: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115000 Dual watchdog inside require: +10 ~ +30V reverse protection Plug-in screw terminal Operating temperature: 14 F to 158 F Storage temperature: 13 F to 185 F Humidity: 5 ~ 95%, non-condensing I-7520: RS-232 to RS-485 Converter Input: RS-232 protocol Output:RS-485/RS-422 Speed: Self Tuner 'inside, 256 modules max. in one RS-485 network without 2048 modules max. in one RS-485 network with Isolation Voltage: 3000VDC Repeater request: 4,000 feet or over 256 modules consumption: 2.2W max. I-7510: RS-485 Repeater Input: RS-485 protocol (two wire) Output: RS-485 protocol (two wire) Speed: Self Tuner inside, Isolation Voltage: 3000VDC consumption: 2.2W max.
I-7520R RS-232 to RS-485 Conve I-7520A RS-232 to RS-485/422 C I-7510A RS-422 Repeater RS-232 RS-485 I-7520R: RS232 to RS-485 Converter Input: RS-232 protocol Output: RS-485 protocol Speed: Self Tuner inside, 256 modules max. in one RS-485 network without 2048 modules max. in one RS-485 network with Isolation voltage: 3000VDC Repeater request: 4,000 feet or over 256 modules consumption: 2.2W max. I-7520A: RS-232 to RS-422/ Converter Input: RS-232 protocol Output: RS-485/RS-422 protocol Speed: Self Tuner inside, 256 modules max. in one RS-485/422 network without 2048 modules max. in one RS-485/422 network with Isolation Voltage: 3000VDC Repeater request: 4,000 feet or over 256 modules consumption: 2.2W max. I-7510A: RS-422 Repeater Input: RS-422 protocol Output: RS-422 protocol Speed: Self Tuner inside, Isolation voltage: 3000VDC consumption: 2.2W
I-7011/I-7011D M I-7018 Module I-7014D Module A/IN I-7011: Thermocouple input module I-7011D: I-7011 with display Type: thermocouple, mv, V or ma Channels: 1 Thermocouple type: J=0 C ~ 760 C K=0 C ~ 1000 C T= 100 C ~ +400 C E=0 C ~ 1000 C R=500 C ~ 1750 C S=500 C ~ 1750 C B=500 C ~ 1800 C N= 270 C ~ 1300 C C=0 C ~ 2320 C Voltage range: ±15mV, ±50mV, ±100mV, ±500mV, ±1V, ±2.5V Current range: ±20mA Sampling rate: 10 samples/sec Bandwidth: 4Hz Zero drift: ±0.033 ppm/ C Span drift: 25ppm/ C CMR @ 50/60Hz: 150dB NMR @ 50/60Hz: 100dB Over voltage protection: ±10V Channel: 1 Logic 0: 0 to 1V Logic 1: 3.5V to 30V Input frequency: 50Hz max. Input pulse width: 1ms min. Channels: 2 Open collector to 30V, 30mA load max. dissipation: 300mW Display LED: 4 1/2 digit (I-7011D) consumption: 1.5W for I-7011 2.2W for I-7011D I-7018: 8-Channel Thermocouple Input Type: thermocouple, mv, V, or ma Channels: 6 differential + 2 single-ended or 8 differential (jumper select) Thermocouple type: J=0 C ~ 760 C K=0 C ~ 1000 C T= 100 C ~ +400 C E=0 C ~ 1000 C R=500 C ~ 1750 C S=500 C ~ 1750 C B=500 C ~ 1800 C N= 270 C ~ 1300 C C=0 C ~ 2320 C Voltage range: ±15mV, ±50mV, ±100mV, ±500mV, ±1V, ±2.5V Current range: ±20mA Sampling rate: 10 samples/sec (total) Bandwidth: 13.1Hz Zero drift: ±0.033 ppm/ C CMR @ 50/60Hz: 150dB NMR @ 50/60Hz: 100dB Span drift: 25ppm/ C Over voltage protection: ±35V Baud rate: 115.2K BPS Modules: 140 A/I Channels: 140 x 8 = 1120 High speed command = #01 Throughput: 1120 channels/sec consumption: 2W I-7014D: Module with LED Display Channels: 1 Input type: v, mv, ma Input range: ±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA Sampling rate: 10 samples/sec Bandwidth: 4Hz Zero drift: ±6µV/ C Span drift: ±25ppm/ C Isolated loop power: +15VDC @ 30mA CMR @ 50/60Hz: 150dB NMR @ 50/60Hz: 100dB Liner input converter Over voltage protection: ±10V Display LED indicator: 4 1/2 digit Digital input Channel: 1 Logic 0: 0 to 1V Logic 1: 3.5V to 30V Input frequency: 50Hz max. Input pulse width: 0.5ms min. Channel: 2 Open Collector to 30V, 30mA max. load dissipation: 300mW Consumption: 2.2W
I-7012/I-7012D Mo I-7017 Module I-7013/I-7013D Mo A/IN I-7012: Module I-7012D: I-7012 with display Channels: 1 Type: mv, V, ma Voltage range: ±150mA, ±500mV, ±1V, ±5V, ±10V Current range: ±20mA Sampling rate: 10 samples/sec Bandwidth: 4Hz Zero drift: ±0.033µV/ C Span drift: ±25PPm/ C CMR @ 50/60Hz: 150dB CMR @ 50/60Hz: 100dB Over voltage protection: ±10V Same as I-7011 Same as I-7011 Display LED: 4 1/2 digit (I-7012D) consumption 1.2W for I-7012 2.2W for I-7012D I-7017: 8 Channel Analog Input Module Channels: 6 differential + 2 single-ended or 8 differential (jumper select) Input type: mv, V, ma Input range: ±150mV, ±500mV, ±1V, ±5V, ±10V and ±20mA Sample rate: 10 sample/sec(total) Bandwidth: 13.1Hz Accuracy: ±0.1% or better Zero drift: ±0.03µV/ C Span drift: ±25ppm/ C CMR @ 50/60Hz: 92dB min Over voltage protection: ±35V Consumption: 2W I-7013: Module I-7013D: I-7013 with display Channel: 1 Input Type: Pt, Ni RTD temperature range Pt100 100 C to +100 C α=0.00385 Pt100 0 C to +100 C α=0.00385 Pt100 0 C to +200 C α=0.00385 Pt100 0 C to +600 C α=0.00385 Pt100 100 C to +100 C α=0.003916 Pt100 0 C to +100 C α=0.003916 Pt100 0 C to +200 C α=0.003916 Pt100 0 C to +600 C α=0.003916 Ni120 80 C to +100 C Ni120 0 C to +100 C Sampling rate: 10 samples/sec Bandwidth: 4Hz Wire connection: 2 3/4 wire Zero drift: ±0.3µV/ C CMR @ 50/60Hz: 92dB min NMR @ 50/60Hz: 100dB Span drift: ±25ppm/ C Consumption 2W for I-7013 2.2W for I-7013D Baud rate = 115.2K BPS Modules = 213 A/I channels = 213 x 8 = 1704 High speed command: $AAA Throughout = 1704channels/sec
I-7021 Analog Output Module I-7050 Digital I/O Module I-7052 Module A/O DI/O I-7021: Analog Output Module I-7050: Digital I/O Module I-7052: Isolated Module Analog output Channels: 1 Output type: ma, V Output range: 0 to 20mA, 4 to 20mA and 0 to 10V Accuracy: ±0.1% of FSR Read back accuracy: ±1% of FSR Resolution: ±0.02% of FSR Zero drift: Voltage output: ±30µV/ C Current output: ±20µA/ C Span temperature coefficient: ±25ppm/ C Programmable output slope: 0.125 to 128 ma/sec 0.0625 to 64.9 V/sec Current load resistor: 500Ω for internal power 1050Ω for external power (PWR-24, P21) consumption: 2W Channels: 7 Logic level 1: +3.5V ~ +30V Channels: 8 Open collector to 30V, 30mA max. load dissipation: 300mW consumption: 0.4W Channels: 8 6 fully independent channels 2 common ground channels Digital input Level Logic level 1: +3.5V to +30V Characteristics Isolation voltage: 5000Vrms Input impedance: 3KΩ/0.5W consumption: 0.4W
I-7060 Digital I/O Module I-7067 Module I-7053 Module DI/O I-7060: Digital I/O Module I-7067: module I-7053: 16-channel Digital Input Module Channels: 4 Four isolated channels with common power Digital input: Logic level 1: +3.5 to 30V Isolation voltage: 3,750Vrms Input impedance: 3KΩ/0.5W Relay output Channels: 4 Two form A relay SPST N.O. Two form C relay SPDT Dry contact Characteristics Contact rating: AC: 125V @0.6A; 250V @0.3A DC: 30V @2A; 110V @0.6A Breakdown voltage: 500VAC (50/60Hz) Relay on time (typical): 3ms Relay off time (typical): 1ms Total switching time: 10ms Insulation resistance: 1000MΩ min. at 500Vdc consumption: 0.8W Relay Output Channels: 7 Form A relay SPST N.O. Dry Contacts AC 120V @0.5A DC 24V @1A Surge strength: 1500VAC Relay on time (typical): 5 ms consumption: 0.8W Channels: 16 Digital input level: DRY contact: logic level 0: close to GND logic level 1: open Wet contact: logic level 0: +2V max. logic level 1: +4V to +30V Effective distance for dry contact: 500m max. consumption: 0.8W
I-7041 Module I-7042 Module I-7043 Module DI/O I-7041: 14-Channel Isolated Module I-7042: 13-Channel Isolated O.C. Output Module I-7043: Non-isolated Digital Output Module Channels: 4 Four isolated channels with common power Digital input level: Logic level 1: +3.5 to 30V Isolation voltage: 3,750V Input impedance: 3KΩ/0.5W consumption: 0.8W Channels: 13 Open collector to 30V max. Output current: 100mA per channel Isolation voltage: 3,750V Direct drive power relay module consumption: 0.8W Accessory RM-104/108/116: 4/8/16 channels of form-c, Din-Rail Mounting Relay Module, SPST, 400V AC, 16A RM-204/208/216: 4/8/16 channels of form-c, Din-Rail Mounting Relay Module, SPDT, 400V AC, 5A Channels: 16 Open collector to 30V Output current: 100mA per channel, total 3A max. Direct drive power relay module consumption: 0.6W (no load) Accessory RM-104/108/116: 4/8/16 channels of form-c, Din-Rail Mounting Relay Module, SPST, 400V AC, 16A RM-204/208/216: 4/8/16 channels of form-c, Din-Rail Mounting Relay Module, SPDT, 400V AC, 5A
I-7044 Isolated Digital I/O M I-7080/I-7080D Counter/Freque I-7188 Embedded Controller Will be Available Will be Available DI/O I-7044: Isolated Digital I/O Module Channels: 4 Isolated channel with common power Digital input level: Logic level 1: +3.5 to 30V Isolation voltage: 3,750V Input impedance: 3KΩ/0.5W Channels: 8 Open collector to 30V Output current: 600mA per channel, total 3A max. consumption: 0.8W I-7080: Counter/Frequency Module I-7080D: I-7080 with display Counter Input Channels: 2 independent 32 bit counters Input frequency: 50KHz max. Input mode: Isolated or nonisolated Isolated input levels: Logic level 1: +3.5 to 30V Isolation voltage: 5,000Vrms Non-Isolated input level: Programmable Threshold voltage Logic level 0: 0 to +5V Logic level 1: 0 to +5V Input pulse width: >10us Maximum count: 32 bit Programmable digital noise filter: 8 us to 262 ms Alarming: high/low alarm comparator on counter 1 Display (for I-7080D) LED Indicator: 5-digit, CH0 or CH1 Frequency Measurement Range: 5Hz to 50Hz Programmable built-in gate time: 1.0/0.1 sec Same as I-7011 consumption 2W for I-7080 2.2W for I-7080D I-7188: Embedded Controller w CPU: 80188-40 RAM: 128K Flash ROM: 128K COM1: RS-232/RS-485 COM2: RS-232/RS-485 3 Channels D/I/O Built-in RTC Built-in 5-digit LED Built-in watchdog supervisory ckt Program download consumption: 2W