XSP Series XSP1 LED Street/Area Luminaire Single Module Version C

XSP Series XSP LED Street/Area Luminaire Single Module Version C Product Description Designed from the ground up as a totally optimized LED street and area lighting system, the XSP Series delivers incredible efficiency without sacrificing application performance. Beyond substantial energy savings and reduced maintenance, Cree achieves greater optical control with our NanoOptic Precision Delivery Grid optic when compared to traditional cobra head luminaires. The XSP Series is the better alternative for traditional street and area lighting with quick payback and improved performance. Applications: Roadway, parking lots, walkways and general area spaces formance Summary NanoOptic Precision Delivery Grid optic 3.7" (6m) Assembled in the U.S.A. of U.S. and imported parts CRI: Minimum 70 CRI CCT: 3000K (+/- 300K); 4000K (+/- 300K); 5700K (+/- 500K) Limited Warranty : 0 years on luminaire/0 years on Colorfast DeltaGuard finish See http://lighting.cree.com/warranty for warranty terms 5." (9mm) Accessories Field-Installed Backlight Control Shield XA-SPBLS - Provides / mounting height cutoff Bird Spikes XA-SPBRDSPK 9.3" (37mm) Ordering Information Example: BXSP-C-HT-ME-EUL-BZ BXSP C HT E Voltage Weight 0-77V 4.5 lbs. (6.6kg) 347-480V 9.5 lbs. (8.8kg) Product Version Mounting Optic CCT Voltage Color Options Options BXSP C HT Horizontal Tenon LG* Type II Long ME* Type II Medium 3ME* Type III Medium 4ME* Type IV Medium E 0W 3000K 40K 4000K 57K 5700K UL Universal 0-77V UH** Universal 347-480V BK Black BZ Bronze SV Silver WH White G Small Four Point Mounting Mounts to.5" (3mm) IP,.66" (4mm) O.D. horizontal tenon J Large Four Point Mounting Mounts to " (5mm) IP,.375" (6m) O.D. horizontal tenon N-Q9/Q8/Q7/Q6/Q5/Q4 Utility Label, NEMA 7-Pin Photocell Receptacle & Field Adjustable Output Must select Q9, Q8, Q7, Q6, Q5 or Q4 Settings Q3-Q are not available with N option External wattage label per ANSI C35 based on Q setting selected 7-pin receptacle per ANSI C36.4 Factory connected 0-0V dim leads Photocell and shorting cap by others / may only be adjusted down in the field Refer to page 6 for power and lumen values Q9/Q8/Q7/Q6/Q5/Q4/Q3/Q/Q Field Adjustable Output Must select Q9, Q8, Q7, Q6, Q5, Q4, Q3, Q, or Q / are fully adjustable in the field Refer to page 6 for power and lumen values R NEMA 7-Pin Photocell Receptacle 7-pin receptacle per ANSI C36.4 Factory connected 0-0V dim leads Photocell and shorting cap by others UTL Utility Label Includes exterior wattage label per ANSI C35 that indicates the maximum available wattage of the luminaire * Available with Backlight Shield when ordered with field-installed accessory (see table above) ** 347-480V utilizes magnetic step-down transformer. For input power for 347-480V, refer to the Electrical Data table Rev. Date: V7 0/9/07 US: lighting.cree.com T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

XSP LED Street/Area Luminaire Single Module Version C Product Specifications CONSTRUCTION & MATERIALS Die cast aluminum housing Tool-less entry Mounts on.5" (3mm) IP,.66" (4mm) O.D. or " (5mm) IP,.375" (6m) O.D. horizontal tenon (minimum 8" [03mm] in length) and is adjustable +/- 5 to allow for fixture leveling (includes two axis T-level to aid in leveling) Luminaire secures with two mounting bolts standard; optional four point mounting available Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, silver and white are available Weight: 0-77V: 4.5 lbs. (6.6kg); 347-480V: 9.5 lbs. (8.8kg) ELECTRICAL SYSTEM Voltage: 0-77V or 347-480V, 50/60Hz Factor: > 0.9 at full load Total Harmonic Distortion: < 0% at full load Class driver Integral 0kV surge suppression protection standard When code dictates fusing, a slow blow fuse or type C/D breaker should be used to address inrush current Designed with 0-0V dimming capabilities. Controls by others 0V Source Current: 0.5mA REGULATORY & VOLUNTARY QUALIFICATIONS culus Listed Suitable for wet locations Certified to ANSI C36.3-00, 3G bridge and overpass vibration standards Meets CALTrans 6 Vibration testing 0kV surge suppression protection tested in accordance with IEEE/ANSI C6.4. Meets FCC Part 5, Subpart B, Class A standards for conducted and radiated emissions Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 7 Meets Buy American requirements within ARRA RoHS compliant. Consult factory for additional details Dark Sky Friendly, IDA Approved when ordered with CCT. Please refer to http://darksky.org/fsa/fsa-products/ for most current information Electrical Data* System Watts 0-77V System Watts 347-480V Total Current (A) 0V 08V 40V 77V 347V 480V E 0 08 0.89 0.50 0.44 0.39 0.3 0.3 * Electrical data at 5 C (77 F). Actual wattage may differ by +/- 0% when operating between 0-480V +/- 0% XSP Series Version C Ambient Adjusted Lumen Maintenance Ambient 5K hr Projected 50K hr Projected 75K hr Calculated 3 5 C (4 F).04.0.0.00 0.99 0 C (50 F).03.0.00 0.99 0.98 5 C (59 F).0.00 0.99 0.98 0.97 0 C (68 F).0 0.99 0.98 0.97 0.96 5 C (77 F).00 0.98 0.97 0.96 0.95 00K hr Calculated 3 Lumen maintenance values at 5 C (77 F) are calculated per TM- based on LM-80 data and in-situ luminaire testing. Luminaire ambient temperature factors (LATF) have been applied to all lumen maintenance factors In accordance with IESNA TM, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 3 In accordance with IESNA TM, Calculated Values represent time durations that exceed six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) US: lighting.cree.com T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

XSP LED Street/Area Luminaire Single Module Version C Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/street-and-roadway/xsp-series- LG 50 03 50 774 0 0 56 580 90 90 0 0 80...5 30.5 30.5 Type II Long Distribution 3000K 4000K 5700K E 6,86 B U0 G 8,35 B U0 G 8,74 B U0 G 30 horizontal angle CESTL Test Report #: PL0454-00 BXSP-C-**-LG-EUL Lumens: 6,944 BXSP-C-**-LG-EUL Mounting Height: 5' (7.6m) A.F.G. Lumens: 6,86 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf 50 033 50 7667 0 0 5 556 90 90 0 0 80...5 30.5 30.5 Type II Long w/bls Distribution 3000K 4000K 5700K E 5,08 B U0 G 6, B U0 G 6,43 B U0 G horizontal angle 30 CESTL Test Report #: PL0455-00 BXSP-C-**-LG-EUL w/xa-spbls Lumens: 5,30 BXSP-C-**-LG-EUL w/xa-spbls Mounting Height: 5' (7.6m) A.F.G. Lumens: 5,08 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf ME 0 50 03 874 556 758 50 0 0 0 70...5 36.6 30.5 30.5 36.6 Type II Medium Distribution 3000K 4000K 5700K 30 horizontal angle RESTL Test Report #: PL0389-00A BXSP-C-**-ME-E-40K-UL Lumens: 8,740 BXSP-C-**-ME-E-40K-UL Mounting Height: 5' (7.6m) A.F.G. Lumens: 8,407 FC at grade E 6,89 B U0 G 8,407 B U0 G 8,80 B U0 G * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf 0 50 8483 636 44 50 0 0 0 70...5 36.6 30.5 30.5 36.6 Type II Medium w/bls Distribution 3000K 4000K 5700K E 5,55 B U0 G 6,750 B U0 G 7,075 B U0 G 30 horizontal angle RESTL Test Report #: PL0389-00A BXSP-C-**-ME-E-40K-UL w/xa-spbls Lumens: 6,759 BXSP-C-**-ME-E-40K-UL w/xa-spbls Mounting Height: 5' (7.6m) A.F.G. Lumens: 6,750 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf US: lighting.cree.com T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

XSP LED Street/Area Luminaire Single Module Version C Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/street-and-roadway/xsp-series- 3ME 50 7 50 5408 0 0 3605 803 90 90 0 0 0 30.5...5 36.6 30.5 30.5 36.6 Type III Medium Distribution 3000K 4000K 5700K 30 horizontal angle RESTL Test Report #: PL0388-00A BXSP-C-**-3ME-E-40K-UL Lumens: 8,708 BXSP-C-**-3ME-E-40K-UL Mounting Height: 5' (7.6m) A.F.G. Lumens: 8,4 FC at grade E 6,74 B U0 G 8,4 B U0 G 8,68 B U0 G * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf 50 5654 50 440 0 0 87 43 90 90 0 0 0 30.5...5 36.6 30.5 30.5 36.6 Type III Medium w/bls Distribution 3000K 4000K 5700K 30 horizontal angle RESTL Test Report #: PL0388-00A BXSP-C-**-3ME-E-40K-UL w/xa-spbls Lumens: 6,086 BXSP-C-**-3ME-E-40K-UL w/xa-spbls Mounting Height: 5' (7.6m) A.F.G. Lumens: 6,00 FC at grade E 5,000 B U0 G 6,00 B U0 G 6,400 B U0 G * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf 4ME 50 556 50 47 0 0 780 390 90 90 0 45...5 30.5 Type IV Medium Distribution 3000K 4000K 5700K E 6,86 B U0 G 8,35 B U0 G 8,74 B U0 G horizontal angle 30 CESTL Test Report #: PL0409-00 BXSP-C-**-4ME-EUL Lumens: 6,93 BXSP-C-**-4ME-EUL Mounting Height: 5' (7.6m) A.F.G. Lumens: 6,86 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf 50 5456 50 409 0 0 78 364 90 90 0 45...5 30.5 Type IV Medium w/bls Distribution 3000K 4000K 5700K E 5,38 B U0 G 6,488 B U0 G 6,807 B U0 G horizontal angle 30 CESTL Test Report #: PL0409-00 BXSP-C-**-4ME-EUL w/xa-spbls Lumens: 5,530 BXSP-C-**-4ME-EUL w/xa-spbls Mounting Height: 5' (7.6m) A.F.G. Lumens: 5,38 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf US: lighting.cree.com T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

XSP LED Street/Area Luminaire Single Module Version C Luminaire EPA Horizontal Tenon Mount Weight: 0-77V: 4.5 lbs. (6.6kg); 347-480V: 9.5 lbs. (8.8kg) Single @ @ 80 3 @ 4 @ Tenon Configuration If used with Cree tenons, please add tenon EPA with luminaire EPA PD-H4; PT-H PD-H4(90); PT-H(90) PD-H4(80); PT-H(80) PD-3H4(90); PT-3H(90) PD-4H4(90); PT-4H(90) 0.7.0.43.74.04 Tenon EPA Part Number EPA PD Series Tenons 0.09 PT Series Tenons 0.0 WM-L 0.3 XA-TMDA8 0.9 Tenons and Brackets (must specify color) Square Internal Mount Horizontal Tenons (Aluminum) - Mounts to 4" (0mm) square aluminum or steel poles PD-H4 Single PD-3H4(90) Triple PD-H4(90) Twin PD-4H4(90) Quad PD-H4(80) 80 Twin Wall Mount Brackets - Mounts to wall or roof WM-L Extended Horizontal Round External Mount Horizontal Tenons (Aluminum) - Mounts to.375"-3" (60-76mm) O.D. round aluminum or steel poles or tenons - Mounts to 3" (76mm), 5" (7mm), or 6" (5mm) square pole with PB-A* tenon PT-H Single PT-3H(90) Triple PT-H(90) Twin PT-4H(90) Quad PT-H(80) 80 Twin Direct Arm Pole Adaptor Bracket - Mounts to 3-6" (76-5mm) round or square aluminum or steel poles XA-TMDA8 Refer to the Bracket and Tenons spec sheet for more details * Specify pole size: 3 (3"), 5 (5"), or 6 (6") for single, double or triple luminaire orientation or 5 (5") or 6 (6") for quad luminaire orientation US: lighting.cree.com T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

XSP LED Street/Area Luminaire Single Module Version C Field Adjustable Output (Q9/Q8/Q7/Q6/Q5/Q4/Q3/Q/Q) Option Description: The Field Adjustable Output option enables luminaires within the XSP Series on this page to be tuned to the exact needs of a particular application through multiple levels of adjustment. When a setting other than Q9 is specified with the N option, that setting becomes the maximum wattage of the luminaire, and a NEMA label reflecting this wattage is affixed to the luminaire. Lumen output and power consumption can only be adjusted downward from the maximum wattage. Q Option & Lumen Data Q Option Setting CCT System Watts Lumen Values 0-77V 347-480V LG ME 3ME 4ME LG w/bls ME w/bls 3ME w/bls 4ME w/bls 6,86 6,89 6,74 6,86 5,08 5,55 5,000 5,38 9 40K 0 08 8,35 8,407 8,4 8,35 6, 6,750 6,00 6,488 57K 8,74 8,80 8,68 8,74 6,43 7,075 6,400 6,807 6,6 6,684 6,539 6,6 4,867 5,359 4,850 5,58 8 40K 98 04 8,066 8,55 7,977 8,066 5,938 6,548 5,97 6,93 57K 8,46 8,555 8,369 8,46 6,30 6,863 6,08 6,603 6,407 6,478 6,337 6,407 4,77 5,94 4,700 4,999 7 40K 9 98 7,86 7,903 7,73 7,86 5,755 6,345 5,734 6,099 57K 8,0 8,9 8,0 8,0 6,038 6,65 6,06 6,399 6 5 6,03 6,7 6,34 6,03 4,566 5,08 4,550 4,839 40K 87 93 7,567 7,650 7,484 7,567 5,57 6,43 5,55 5,904 57K 7,939 8,06 7,85 7,939 5,845 6,438 5,84 6,94 5,86 5,96 5,797 5,86 4,35 4,75 4,300 4,573 40K 8 88 7,5 7,30 7,073 7,5 5,65 5,805 5,46 5,580 57K 7,503 7,585 7,40 7,503 5,54 6,085 5,504 5,854 5,5 5,58 5,460 5,5 4,065 4,475 4,050 4,308 4 40K 74 79 6,735 6,80 6,66 6,735 4,959 5,468 4,94 5,55 57K 7,066 7,44 6,989 7,066 5,03 5,73 5,84 5,54 5,80 5,37 5,3 5,80 3,84 4,99 3,800 4,04 3* 40K 68 7 6,39 6,389 6,50 6,39 4,653 5,30 4,636 4,93 57K 6,630 6,703 6,557 6,630 4,88 5,377 4,864 5,73 4,567 4,67 4,56 4,567 3,36 3,70 3,350 3,563 * 40K 60 64 5,57 5,633 5,50 5,57 4,0 4,53 4,087 4,347 57K 5,845 5,909 5,78 5,845 4,303 4,740 4,88 4,56 4,58 4,04 4, 4,58 3,06 3,370 3,050 3,44 * 40K 5 56 5,07 5,8 5,07 5,07 3,734 4,8 3,7 3,958 57K 5,3 5,380 5,63 5,3 3,98 4,36 3,904 4,5 * Not available with N option Electrical and lumen data at 5 C (77 F). Actual wattage and lumen output may differ by +/-0% when operating between 0-480V +/-0% 07 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content is subject to change. Patent www.cree.com/patents. Cree, NanoOptic, and Colorfast DeltaGuard are registered trademarks, and the Cree logo, Precision Delivery Grid and XSP are trademarks of Cree, Inc. The UL logo is a registered trademark of UL LLC. NEMA is a registered trademark of the National Electrical Manufacturers Association. US: lighting.cree.com T (800) 36-6800 F (6) 504-545 T (800) 473-34 F (800) 890-7507

XSP Series XSPW LED Wall Mount Luminaire Product Description The XSPW LED wall mount luminaire has a slim, low profile design intended for outdoor wall mounted applications. The rugged lightweight aluminum housing and mounting box are designed for installation over standard single gang J-Boxes and mud ring single gang J-Boxes. The luminaire allows for through-wired or conduit entry from the top, bottom, sides and rear. The housing design is intended specifically for LED technology including a weathertight LED driver compartment and thermal management. Optic design features industry-leading NanoOptic Precision Delivery Grid system in multiple distributions. Applications: General area and security lighting formance Summary NanoOptic Precision Delivery Grid optic 9.3" (36mm) Assembled in the U.S.A. of U.S. and imported parts CRI: Minimum 70 CRI CCT : 3000K (+/- 300K); 4000K (+/- 300K); 5700K (+/- 500K) Limited Warranty : 0 years on luminaire/0 years on Colorfast DeltaGuard finish See http://lighting.cree.com/warranty for warranty terms " (305mm) Accessories Field-Installed Beauty Plate WM-PLT** - " (305mm) Square WM-PLT4** - 4" (356mm) Square - Covers holes left by incumbent wall packs ** Must specify color 4.8" (mm) 3.8" (97mm) Multi-Level Sensor location (ordered as an option) Weight 9.5 lbs. (4.3kg) Ordering Information Example: XSPW-A-0F-C-U-Z XSPW A 0 Product Version Mounting Optic Modules Voltage Color Options Options XSPW A 0 Wall Type II Medium 3 Type III Medium 3000K F 4000K M 5700K C 4W G 5W U Universal 0-77V 0V 08-77V 6* 347V S Silver T Black W White Z Bronze K P Multi-Level Refer to ML spec sheet for details Available with C only Available with U and 6 voltages only Photocell Not available with K option Available with or voltages only * Available in Canada only. 347V utilizes magnetic step-down transformer. For input power for 347V, refer to the Electrical Data table Rev. Date: VersionA V9 0/05/07 US: lighting.cree.com T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

XSPW LED Wall Mount Luminaire Product Specifications CONSTRUCTION & MATERIALS Slim, low profile design Luminaire housing specifically designed for LED applications with advanced LED thermal management and driver Luminaire mounting box designed for installation over standard single gang J-Boxes and mud ring single gang J-Boxes Luminaire can also be direct mounted to a wall and surface wired Secures to wall with four 3/6" (5mm) screws (by others) Conduit entry from top, bottom, sides, and rear Designed and UL approved for easy through-wiring Designed for downlight applications only Exclusive Colorfast DeltaGuard finish features an E-coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Silver, black, white and bronze are available Weight: 9.5lbs. (4.3kg) ELECTRICAL SYSTEM Voltage: 0-77V or 347V, 50/60Hz Factor: > 0.9 at full load Total Harmonic Distortion: < 0% at full load Class driver Integral 0kV surge suppression protection standard When code dictates fusing, a slow blow fuse or type C/D breaker should be used to address inrush current C is designed with 0-0V dimming capabilities standard. Controls by others 0V Source Current: 0.5 ma REGULATORY & VOLUNTARY QUALIFICATIONS culus Listed Suitable for wet locations Enclosure rated IP66 per IEC 6059 DLC qualified when ordered with 40K or 57K. Please refer to https://www.designlights.org/search/ for most current information 0kV surge suppression protection tested in accordance with IEEE/ANSI C6.4. Meets FCC Part 5, Subpart B, Class A standards for conducted and radiated emissions Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 7 Meets Buy American requirements within ARRA RoHS compliant. Consult factory for additional details Electrical Data* System Watts 0-77V System Watts 347V Total Current (A) 0V 08V 40V 77V 347V C 4 46 0.36 0. 0.9 0.6 0.4 G 5 7 0. 0.3 0. 0.0 0.08 * Electrical data at 5 C (77 F). Actual wattage may differ by +/- 0% when operating between 0-347V +/- 0% XSPW Series Ambient Adjusted Lumen Maintenance Ambient 5 C (4 F) 0 C (50 F) 5 C (59 F) 0 C (68 F) 5 C (77 F) C G C G C G C G C G 5K hr Projected 50K hr Projected 75K hr Projected.04.0.0.0.00.03.0.00.00 0.99.0.00 0.99 0.98 0.98.0 0.99 0.98 0.97 0.97.00 0.98 0.97 0.96 0.96 00K hr Calculated 3 Lumen maintenance values at 5 C (77 F) are calculated per TM- based on LM-80 data and in-situ luminaire testing. Luminaire ambient temperature factors (LATF) have been applied to all lumen maintenance factors In accordance with IESNA TM, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 3 In accordance with IESNA TM, Calculated Values represent time durations that exceed six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) US: lighting.cree.com T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

XSPW LED Wall Mount Luminaire Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/wall-mount/xsp-series-wall 0 50 30 77 5 576 50 0 3 3 3...5 5 9. Type II Medium Distribution 3000K/4000K 5700K 3 9. 9. 9. C 3,89 B U0 G 4,09 B U0 G 30 horizontal angle CESTL Test Report #: 04-007 XSPW-A-*F-G-U-S Lumens:,739 XSPW-A-*F-C-U-S Mounting Height: (3.) A.F.G. Lumens: 3,89 FC at grade G,59 B U0 G,7 B U0 G * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf 3 3 3 9....5 5 9. 9. XSPW-A-*F-G-U-S Mounting Height: (3.) A.F.G. Lumens:,59 FC at grade 3 0 50 750 063 375 688 50 0 3.. 3 3 45.5 5 9. 9. 9. Type III Medium Distribution 3000K/4000K 5700K C 3,89 B U0 G 4,09 B U0 G 30 horizontal angle CESTL Test Report #: 04-008 XSPW-A-*-3-F-C-U-S Lumens: 4,87 XSPW-A-*-3-F-C-U-S Mounting Height: (3.) A.F.G. Lumens: 3,89 FC at grade G,59 B U0 G,7 B U0 G * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf 50 776 50 3 3 3 45 9. 33 0 0 888 444 90 90...5 5 9. 9. 30 horizontal angle CESTL Test Report #: 04-009 XSPW-A-*-3-F-G-U-S Lumens:,69 XSPW-A-*-3-F-G-U-S Mounting Height: (3.) A.F.G. Lumens:,59 FC at grade 07 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content is subject to change. Patent www.cree.com/patents. Cree, NanoOptic, and Colorfast DeltaGuard are registered trademarks, and the Cree logo, XSPW and Precision Delivery Grid are trademarks of Cree, Inc. The UL logo is a registered trademark of UL LLC. The DLC QPL logo is a registered trademark of Northeast Energy Efficiency Partnerships, Inc. US: lighting.cree.com T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

Beta Lantern Project: Type: Qty: _ Series Optics Reflector Mounting Lamping Finish Voltage Options _ Pole Series Height Finish Pole Options Series Optics Reflector Mounting Lamping Finish Voltage Options BLC Beta Lantern L S Flat Glass Lens Sagged Glass Lens R R3 R5 Type II Aluminum Reflector Type III Aluminum Reflector Type V Aluminum Reflector Single Double W Wall Mount Metal Halide H050 50w H070 70w H00 00w H50 50w HPS S050 50w S070 70w S00 00w S50 50w WH White BK Black BZ Bronze SV Silver SP Specify Premium Color 0 08 40 77 347 Not available for 347V Only for 55v lamp HS House Side Shield QR Quartz Restrike (40w Max) FS Single Fusing PCT Photocell Tenon BLC - S 3 6 7 /4" (54m) 36 /4" (9m) 3 /" O.D. (9m) 4 5 8 BLC-L 6. Shielding - Specify tempered flat glass lens (L), or tempered sagged glass lens (S). Lenses are secured using a captive ring and are easily removable for access to lamp (no special tools required). Version with tempered Glass Lens (BLC-L) is IDA- Approved TM dark sky friendly. 7. Pole Fitter - Cast aluminum fitter secures to pole with 3 stainless steel Allen head set screws. For 3 / (9m) pole tenon. 8. Socket - 4KV Pulse rated porcelain medium base socket pre-wired to ballast at factory. 9. Ballast - (Not shown) A high efficiency, pulse start, core and coil ballast regulates voltage for H.I.D. lamp. Consult factory for detailed ballast information. Selux utilizes a high quality Polyester Powder Coating. All Selux luminaires and poles are finished in our Tiger Drylac certified facility and undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention. All products are tested in accordance with test specifications for coatings from ASTM and PCI. Standard exterior colors are White (WH), Black (BK), Bronze (BZ), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide. Hot Dip Galvanized finish (GV) on all steel parts also available.. Fixture Cap - Decorative aluminum fixture cap removable for ballast access.. Gasketing - Continuous molded gaskets provide weatherproofing, dust, and insect control. 3. Fixture Hood - Decorative aluminum shade with hinged door for lamp access (no special tools required). 4. Lamp - One clear, ED-7 metal halide or high pressure sodium up to 50w. Horizontal lamp for R and R3 reflectors; base-up vertical lamp for R5 reflector. Lamp provided by others. 5. Reflector - Precision formed aluminum reflector available with a Type II, III, or V distribution. Exterior Luminaire Finish - Selux Corp. 03 TEL (845) 834-400 FAX (845) 834-40 www.selux.us BL-083-0 (ss-v7.0) NRTL Listed (i.e. UL, CSA) Union Made Affiliated with IBEW Local 363 E In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Beta Lantern Photometry Closed Version / Tempered Flat Glass Lens / R Reflector / 50w MH Catalog # BLC-L-RH50 Report # SX-9559-A l Precision formed aluminum reflector with specular kick reflectors to precisely control distribution. l Ideal for applications demanding max. spacing. l Maximum candela of 7467 at 7.5 from vertical. l IES classification - Type II Full Cutoff. l IDA-Approved TM dark sky friendly. DOWNLOAD IES FILE: http://www.selux.us/fileadmin/us/exterior/ies_file/bl_ies.zip Closed Version / Tempered Flat Glass Lens / R3 Reflector /50w MH Catalog # BLC-L-R3H50 Report # LSI-3535 l Precision formed aluminum reflector with specular kick reflectors to precisely control distribution. l Ideal for applications demanding max. spacing. l Maximum candela of 99 at -.5 from vertical. l IES classification - Type II Full Cutoff. l IDA-Approved TM dark sky friendly. DOWNLOAD IES FILE: http://www.selux.us/fileadmin/us/exterior/ies_file/bl_ies.zip Closed Version / Tempered Flat Glass Lens / R5 Reflector / 50w MH Catalog # BLC-L-R5H50 Report # LSI-3593 l Precision formed aluminum reflector with vertical, base-up lamp. l Ideal for applications demanding a uniform symmetric light distribution. l Maximum candela of 464 at.5 and -.5 from vertical. l IES classification - Type V Full Cutoff. l IDA-Approved TM dark sky friendly. DOWNLOAD IES FILE: http://www.selux.us/fileadmin/us/exterior/ies_file/bl_ies.zip HID Lamp Prorate Table (ED-7 Clear, Medium-Base Lamp) High Pressure Sodium Metal Halide Wattage Factor Lumens Wattage Factor Lumens 50 0.8 4000 50 0.4 3400 70 0.45 6400 70 0.39 5500 00 0.67 9500 00 0.64 9000 50.0 4400 50.00 4000 Conversion Chart Values based on ' mounting height. Mounting Height 8' ' 4' 6' Multiply..0.00 0.93 0.87 Selux Corp. 03 BL-083-0 (ss-v7.0) In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Beta Lantern Mounting Single Die-cast aluminum fitter base secured to pole with three, stainless steel, Allen head set screws. Double Die-cast aluminum double luminaire mounting arm for pole mounted fixtures. Secured to pole with (4) stainless steel Allen head bolts. Wall Die-cast aluminum wall mount arm. Secured to wall with /4" diameter threaded fasteners (by others). /4" (54m) 60 5 /8" (54m) 8 /" (75mm) 40 /" (09mm) 39 3 /8" (00m) 7 5 /6" (455mm) 3 /" (9m) Pole Height ( ft shown) Wall Arm Mounting Detail (Conduits and mounting hardware by others.) 3 5 /6" (0m) 5 /" (4m) 6 /6" (7m) 3 /4" (7m) Selux Corp. 03 BL-083-03 (ss-v7.0) In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Beta Lantern Pole Information Refer to A35, S635, or S35 Pole specification sheets for construction details, anchorage information and additional options. A35 & S35 Round Straight Aluminum & Round Straight Steel Poles S635 Round Stepped Steel Pole Overall Height (8' shown) 44" (8mm) : 4 Scale 4" (6m) 4" (6m) Shown with standard base covers. Base Cover Information Refer to A35, S635, or S35 Pole specification sheets for construction details, anchorage information and additional options. Straight Poles (A35 & S35) BC5 Standard Base Cover Two-piece cast aluminum Stepped Steel Pole (S635) BC6 Standard Base Cover One-piece cast aluminum BC Optional Base Cover (A35 & S35) One-piece cast aluminum 3 /" (89mm) 3 /" (89mm) 5 /4" (34mm) 6 5 /8" (68mm) 4 5 /8" (8mm) 5 /8" (55m) Ø 7 /6" (36mm) Ø5 3 /4" (40m) Ø 5 /8" (3m) Selux Corp. 03 BL-083-04 (ss-v7.0) In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Beta Lantern Pole Data Chart Pole Series Bolt Circle 70 mph EPA Information (ft ) 80 mph 90 mph 00 mph 0 mph Height Finish Options S635 A35 S35 S635 A35 S35 3 /" Diameter Stepped Steel Pole 3 /" Diameter Straight Aluminum Pole 3 /" Diameter Straight Steel Pole 3 /" Diameter Stepped Steel Pole 3 /" Diameter Straight Aluminum Pole 3 /" Diameter Straight Steel Pole Ø9" Ø9" 57.6 4.8 45.6.4.4 44.3.3 35.0 9.3 8.6 34.6 9.4 8.6 7.3 7. 6.5 7.5 7.3 6.7.6 5.4 4.9.8 5.9 5.4 7.8 4.3 3.9 8 8 ft. 0 0 ft. WH White BK Black BZ Bronze SV Silver SP Specify Premium Color BC REC Decorative Cast Aluminum Base Cover (for A35 & S35 poles only) GFCI Receptacle with weatherproof cover S635 A35 3 /" Diameter Stepped Steel Pole 3 /" Diameter Straight Aluminum Pole Ø9" 37.6 9.9 8.7 7.3.3 5.4 7.5 4.0 4.4 3. ft. For Photocell Tenon option, see p. S35 3 /" Diameter Straight Steel Pole S635 3 /" Diameter Stepped Steel Pole A35 3 /" Diameter Straight Aluminum Pole S35 3 /" Diameter Straight Steel Pole Ø9" 9. 3.7 8.0 7.3 6.7 4. 5.8 5.3 4.9 8.6 4. 3.8 3.6 4.6.7.8.9..9 4 4 ft. Weatherproof cover intended for portable tools or other portable equipment connected to the outlet only when attended. For other requirements please consult factory. S635 3 /" Diameter Stepped Steel Pole Ø9".7 5.8.3 9.6 7.6 A35 3 /" Diameter Straight Aluminum Pole 4.9 3...4 0.8 6 6 ft. S35 3 /" Diameter Straight Steel Pole 4.4.8.9. 0.6 Other pole configurations available, consult factory. Effective Projected Area of Single Luminaire = 0.9 ft (0.09m ) / Weight of Luminaire = 35.0 lbs (5.9kg) Effective Projected Area of Double Luminaire =.37 ft (0.m ) / Weight of Double Luminaire (includes arms) = 94.0 lbs (4.6kg) Optional Accessories Photo Cell Tenon (PCT) - Button type photocell mounted in cast aluminum pole top tenon. Tenon has integral cast visor to prevent false start/stop cycle and can be oriented for optimum performance. Refer to fixture spec sheet to determine if this option is applicable. GFCI Receptacle (REC) - GFCI duplex receptacle with cast base bolted to pole and gasketed, provided with weather-proof, self-closing cover; located 36" (95mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel. 3 /8" (34mm) 3 /6" (7mm) 3 /6" (mm) /" (3mm) 4 5 /8" (7mm) Selux Corp. 03 BL-083-05 (ss-v7.0) In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

CPY Series - Version A CPY50 LED Canopy/Soffit Luminaire Product Description The CPY50 LED Canopy/Soffit Luminaire has an extremely thin profile constructed of rugged cast aluminum. It can be surface mounted easily from below the canopy deck and can be pendant mounted. Direct imaging of the LEDs is eliminated with a highly efficient patterned flat or 0.9" (3mm) drop glass lens. Applications: Petroleum canopies, CNG fueling stations, soffits DM Mount formance Summary Made in the U.S.A. of U.S. and imported parts Flat Lens Lumens: Up to 7,470 Efficacy: Up to 5 LPW CRI: Minimum 70 CRI CCT : 4000K (+/- 300K), 5700K (+/- 500K) Standard Limited Warranty : 0 years on luminaire/0 years on Colorfast DeltaGuard finish IP66 Rated (Direct Mount only) Drop Lens Class I, Division Hazardous Location for select models See http://lighting.cree.com/warranty for warranty terms Accessories Field-Installed Direct Mount Luminaires Canopy Upgrade Kits (8 ga. steel) XA-BXCCMW for use with Jet-Philips,.60" (549mm) square XA-BXCCNW for use with Elsco Franciscan,.06" (56m) square XA-BXCCPW for use with LSI Dakota or Masters,.50" (57mm) square XA-BXCCQW for use with Whiteway Riviera or Rig-A-Lite, 0.60" (53mm) square XA-BXCCRW for use with Elsco Merrit, 8.06" (459mm) square XA-BXCCSW for use with LSI Richmond or Whiteway Civic, 0" (584mm) L x 0" (33m) W Direct Mount Junction Box/Stem Kit XA-BXCCJBOX 6.0" (5mm) H x 3/4" (9mm) NPT Stem - Watertight - Rated for feed through 8 (4 in, 4 out) # AWC conductors Direct Mount Beauty Plates XA-BXCCBPW 7" (665mm) Beauty Plate Only (8 ga. steel) XA-BXCCBPBW 7" (665mm) Beauty Plate (8 ga. steel) w/" (305mm) Backer Plate (6 ga. steel) - For use in canopies where deck opening is larger than what is required for mounting the CPY50 luminaire. Maximum deck opening 0.75" x 5" (83mm x 375mm) XA-BXCCBPB6W 7" (665mm) Beauty Plate (8 ga. steel) w/6" (406mm) Backer Plate (6 ga. steel) - For use in canopies where deck opening is larger than what is required for mounting the CPY50 luminaire. Maximum deck opening " x 5" (305mm x 375mm) * Must specify color Ordering Information Example: CPY50-A-DM-D-D-UL-SV Pendant Mount Luminaires Pendant Mount Kits XA-PSKIT* 5" (7mm) pendant XA-PS8KIT* " (79mm) pendant XA-PSKIT* 5" (38mm) pendant - Includes two conduit fittings and 3/4-4 NPT pipe threaded on two ends Hand-Held Remote XA-SENSREM - For successful implementation of the programmable multi-level option, a minimum of one hand-held remote is required 0.9" (3mm) Drop Lens Gasket to Seal up to 4.5" (08mm) Canopy Cutout Mounts with (4) Supplied Self-Sealing Sheet Metal Screws Weight 7." (83mm).5 lbs. (5.7kg).0" (5m) Flat Glass Lens.0" (79mm) 3/4" (9mm) NPT Conduit Entry 5.0" (38mm) CPY50 A Product Version Mounting Optic Voltage Color Options Options CPY50 A DM Direct PD Pendant D 0.9" (3mm) Drop Lens F Flat Lens A 8W D 40W UL Universal 0-77V UH Universal 347-480V BK Black BZ Bronze SV Silver WH White DIM 0-0V Dimming Available with D only Control by others Refer to Dimming spec sheet for details Can't exceed wattage of specified HZ Class I, Div. Hazardous Location Certification Not available with DIM or PML options PML Programmable Multi-Level Available with D only Available with UL voltage only Refer to PML spec sheet for details 40K 4000K Color Temperature Minimum 70 CRI Color temperature per luminaire Rev. Date: V0 //07 US: lighting.cree.com T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

CPY50 LED Canopy/Soffit Luminaire - Version A Product Specifications CONSTRUCTION & MATERIALS Slim, low profile design Easy mounting and servicing from below the deck Luminaire housing is constructed of rugged cast aluminum with integral heat sink specifically designed for LED Flat lens is 0.5" tempered Solite glass Drop lens is 0.57" molded borosilicate glass Direct mount is suitable for use in single or double skin canopies with a minimum 4.0" (0mm) wide panels and a minimum gauge, 0.030" (0.7mm) canopy thickness Direct mount luminaire mounts directly to the canopy deck with the drilling of a single " to 4" (5mm to 0mm) round hole, is secured in place with self-sealing screws that provide a weathertight seal and includes 3/4 (9mm) conduit entry for direct wire feed Standard pendant mount includes a mounting bracket and a J-Box for customer wiring and is intended to be mounted by 3/4 IP pendant (by others) Hazardous location pendant mount has a threaded hub which accepts 3/4" NPT conduit (by others) and secures with a /4"-0 set screw Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, silver and white are available Weight:.5 lbs. (5.7kg) ELECTRICAL SYSTEM Voltage: 0-77V or 347-480V, 50/60Hz, Class drivers Factor: > 0.9 at full load Total Harmonic Distortion: < 0% at full load Integral 6kV surge suppression protection standard To address inrush current, slow blow fuse or type C/D breaker should be used 0V Source Current: 0.5mA Operating Temperature Range: Applications Requiring Class I, Division Hazardous Location Ratings: -40 C - +5 C; A :-40 C - +40 C (direct mount to plywood), -40 C - +45 C (direct mount to sheet metal/suspended); D s: -40 C - +35 C (sheet metal/suspended only) WARNING: Exceeding maximum operating temperature may result in thermal foldback REGULATORY & VOLUNTARY QUALIFICATIONS culus Listed Suitable for wet locations when ordered with DM mount Suitable for damp locations when ordered with PD mount Suitable for wet locations when ordered with PD mount and HZ option Enclosure rated IP66 per IEC 6059 when ordered with DM mount Consult factory for CE Certified products 6kV surge suppression protection tested in accordance with IEEE/ANSI C6.4. Meets FCC Part 5, Subpart B, Class A standards for conducted and radiated emissions DLC and DLC Premium qualified versions available. Please refer to https://www.designlights.org/search/ for most current information Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 7 Meets Buy American requirements within ARRA RoHS compliant. Consult factory for additional details Class I, Division Hazardous Location rated when ordered with the HZ option. Not available with DIM or PML options. Consult factory for additional details Electrical Data* System Watts 0-77V System Watts 347-480V Total Current (A) 0V 08V 40V 77V 347V 480V A 8 84 0.69 0.40 0.35 0.3 0.4 0.8 D 40 45.4 0.7 0.6 0.54 0.44 0.9 * Electrical data at 5 C (77 F). Actual wattage may differ by +/- 0% when operating between 0-480V +/- 0% Recommended CPY Series - Version A Lumen Maintenance Factors () Ambient 5 C (4 F) 0 C (50 F) 5 C (59 F) 0 C (68 F) 5 C (77 F) 30 C (86 F) 5K hr Projected 50K hr Projected 75K hr Projected A.05.00 0.93 0.87 0.8 D.05 0.98 0.90 0.83 0.76 A.04 0.99 0.9 0.86 0.80 D.04 0.98 0.89 0.8 0.75 A.0 0.97 0.9 0.84 0.79 D.0 0.96 0.88 0.80 0.74 A.0 0.96 0.90 0.84 0.78 D.0 0.95 0.87 0.80 0.73 A.00 0.95 0.89 0.83 0.77 D.00 0.94 0.86 0.79 0.7 A 0.99 0.94 0.88 0.8 0.76 D 0.99 0.93 0.85 0.78 0.7 00K hr Projected Lumen maintenance values at 5 C (77 F) are calculated per TM- based on LM-80 data and in-situ luminaire testing on sheet metal In accordance with IESNA TM, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 3 In accordance with IESNA TM, Calculated Values represent time durations that exceed six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) US: lighting.cree.com T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

CPY50 LED Canopy/Soffit Luminaire - Version A Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/canopy-and-soffit/cpy-series DROP LENS 0 50 3457 593 78 864 50 horizontal angle 0...5 5 0 0 Drop Lens Distribution 4000K 5700K A 7,600 B3 U G 8,000 B3 U G 30 30 D 6,403 B4 U3 G 7,059 B4 U3 G CESTL Test Report #: 03-0 CPY50-A-**-D-A-UL Lumens: 8,356 CPY50-A-**-D-D-UL Mounting Height: 5' (4.6m) Lumens: 7,059 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf FLAT LENS 50 3373 530 50 Flat Lens Distribution 0 687 843 horizontal angle 0...5 5 0 0 0 4000K 5700K A 7,600 B3 U0 G 8,000 B3 U0 G 30 30 D 6,798 B4 U0 G 7,470 B4 U0 G ITL Test Report #: 76866 CPY50-A-**-F-A-UL Lumens: 8,8 CPY50-A-**-F-D-UL Mounting Height: 5' (4.6m) Lumens: 7,470 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf PD Mount PD Mount w/hz Option 5.0" (38mm) 5.0" (38mm) 5.0" (383mm) Pendant not included 5.9" (49mm) 8.0" (03mm) Set-Screw 5.0" (38mm) Threaded Hub 3/4" NPT Conduit Supplied By Others Flat Glass Lens " (75.5mm).0" (5m) 07 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content is subject to change. Patent www.cree.com/patents. Cree, Colorfast DeltaGuard and CPY50 are registered trademarks and the Cree logo is a trademark of Cree, Inc. The UL logo is a registered trademark of UL LLC. The DLC QPL logo and the DLC QPL Premium logo are registered trademarks of Northeast Energy Efficiency Partnerships, Inc. US: lighting.cree.com T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507