SCHEDULE 40 FLUSH JOINT FITTINGS

130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53 106.14 2" 18.06 21.92 25.89 76.70 24.38 30.84 50.44 108.31 3" 30.16 46.31 77.41 144.93 37.74 58.95 98.91 181.59 4" 35.69 53.34 91.47 198.43 42.52 67.34 108.54 231.02 5" SDR 21 * 81.05 114.46 172.31 300.26 91.17 129.63 197.60 348.31 6" 89.83 129.44 199.70 361.32 99.94 147.14 243.95 428.34 8" 158.77 224.01 345.32 590.19 198.41 251.83 385.78 659.74 10" 224.13 301.52 479.97 829.28 255.74 339.45 536.87 924.11 12" 332.00 387.87 587.97 1,030.48 376.26 429.59 670.16 1,169.56 PIPE SIZE THREADED CAP THREADED PLUG RISER PIPE 2" Combo FJ Thd X Pop Riveted Point 5' Riser 5' Screen SCHEDULE 40 PVC FLUSH JOINT SCHEDULE 40 FLUSH JOINT FITTINGS Individual End Fittings THREADED POINT MOLDED PIN X POINT MOLDED BOX X POINT POP RIVETED POINT SCREEN 49.68 Attached to Screen POP RIVETED PLUG 1" 15.26 15.26 17.95 4.79 1 ¼" 25.26 25.26 27.81 5.09 1 ½" 23.65 23.65 26.19 5.15 2" 17.18 17.18 8.46 17.05 7.51 3" 20.60 20.60 15.96 11.71 4" 26.33 26.33 28.74 18.77 15.17 5" SDR 21 * 58.08 58.08 26.21 6" 63.24 63.24 31.11 8" 109.24 109.24 38.48 10" 166.66 166.66 66.94 12" 218.48 218.48 87.12 *This Flush Joint Thread is the ASTM F-480A88 thread for 5" Schedule 40 PVC and Big Foot Manufacturing is putting this thread on 5" SDR-21 PVC. The wall thickness of SDR-21 is approximately.044 less than the wall thickness of Schedule 40. 2" and 4" PIPE IS PROVIDED WITHOUT PRINT AND MEASURES SHOULDER TO SHOULDER. * ALL OTHER SIZES WILL HAVE PRINT ON THE PIPE AND WILL MEASURE OVERALL LENGTH SO WILL BE SHORT THE LENGTH OF THE PIN THREAD. SIZES THRU 18" AVAILABLE THRU QUOTATION *PRICES SUBJECT TO CHANGE WITHOUT NOTICE*

130 SCHEDULE 80 PVC FLUSH JOINT RISER PIPE SCREEN PIPE SIZE 2.5 5 10 20 2.5 5 10 20 1/2" 14.52 18.89 25.77 20.84 29.00 42.21 3/4" 15.75 21.35 31.96 56.31 22.07 31.46 48.39 87.92 1" ** 12.53 17.92 28.11 51.65 18.85 28.03 44.55 83.26 1-1/4" ** 14.99 22.90 37.46 69.00 21.31 33.01 53.88 100.61 1-1/2" 19.42 31.13 49.89 95.16 25.74 41.24 69.22 132.03 2" 21.46 31.63 52.78 100.42 27.78 41.74 70.75 135.47 4" 62.48 110.83 206.32 402.62 70.06 123.47 227.82 439.29 ** 1" and 1-1/4" Schedule 80 is White. Remaining Schedule 80 is Gray. SCHEDULE 80 FLUSH JOINT FITTINGS Individual End Fittings Attached to Screen PIPE SIZE THREADED CAP THREADED PLUG THREADED POINT POP RIVETED POINT POP RIVETED PLUG 1/2" 14.37 14.37 16.93 7.58 3/4" 14.37 14.37 16.93 4.97 1" 15.26 15.26 17.95 4.54 1-1/4" 23.65 23.65 26.19 5.99 1-1/2" 23.65 23.65 26.19 5.84 2" 21.44 21.44 7.60 4" 38.19 38.19 16.07 PLEASE NOTE: 1/2" - 1-1/2" WILL BE INDIVIDUALLY WRAPPED WITH "O" RINGS AVAILABLE ON REQUEST & SCH 80 * ALL OTHER SIZES WILL BE INDIVIDUALLY WRAPPED WITH "O" RINGS PROVIDED. SIZES THRU 18" AVAILABLE THRU QUOTATION *PRICES SUBJECT TO CHANGE WITHOUT NOTICE*

150 PVC COUPLINGS & SPIGOTS 1501323200 4" BELL X 4" BELL LONG COUPLING $ 21.37 1502323200 4" BELL X 4" BELL COUPLING TURNED $ 28.88 1501363600 4-1/2" BELL X 4-1/2" BELL LONG COUPLING $ 21.37 1504403200 5" BELL X 4" BELL REDUCING COUPLING $ 26.94 1503403201 5" BELL X 4" SPIGOT $ 21.37 1505403202 5" BELL X 4" SPIGOT WITH 4" NPTTHD $ 26.78 1501404000 5" BELL X 5" BELL LONG COUPLING $ 27.09 150140400017 5" BELL X 5" BELL LONG COUPLING FOR SDR17 $ 32.42 1504484000 6" BELL X 5" BELL REDUCING COUPLING $ 27.09 1503484001 6" BELL X 5" SPIGOT $ 33.44 1501484800 6" BELL X 6" BELL LONG COUPLING $ 32.75 1505504002 6-1/4" BELL X 5" SPIGOT WITH 5" NPTTHD $ 50.94 1504504800 6-1/4" BELL X 6" BELL REDUCING COUPLING $ 33.07 1505504802 6-1/4" BELL X 6" SPIGOT WITH 6" NPTTHD $ 37.03 1501505000 6-1/4" BELL X 6-1/4" BELL LONG COUPLING $ 49.08 OUR CUSTOM MADE COUPLINGS AND SPIGOTS MEET ASTM F-480 STANDARDS FOR TAPERED SOCKETS OR BELL END PIPE. THESE PRODUCTS COME IN MANY SHAPES AND SIZES TO MEET MANY NEEDS.

160 LIST PRICING PVC NIPPLES SCHEDULE 40 PART # DESCRIPTION 1604031221 3"X12" S40 NIPPLE NPT X PE $ 10.10 1604031211 3"X12" S40 NIPPLE NPT X NPT $ 13.71 1604031213 3"X12" S40 NIPPLE NPT X PLUG $ 21.81 1604031821 3"X18" S40 NIPPLE NPT X PE $ 12.75 1604031811 3"X18" S40 NIPPLE NPT X NPT $ 16.36 1604031813 3"X18" S40 NIPPLE NPT X PLUG $ 24.46 1604032421 3"X24" S40 NIPPLE NPT X PE $ 15.40 1604032411 3"X24" S40 NIPPLE NPT X NPT $ 19.00 1604032413 3"X24" S40 NIPPLE NPT X PLUG $ 27.10 1604041212 4"X12" S40 NIPPLE NPT X PE $ 12.06 1604041211 4"X12" S40 NIPPLE NPT X NPT $ 15.66 1604041213 4"X12" S40 NIPPLE NPT X PLUG $ 23.10 1604041812 4"X18" S40 NIPPLE NPT X PE $ 15.69 1604041811 4"X18" S40 NIPPLE NPT X NPT $ 19.29 1604041813 4"X18" S40 NIPPLE NPT X PLUG $ 26.73 1604042412 4"X24" S40 NIPPLE NPT X PE $ 19.31 1604042411 4"X24" S40 NIPPLE NPT X NPT $ 22.92 1604042413 4"X24" S40 NIPPLE NPT X PLUG $ 30.36 SCHEDULE 80 1608031221 3"X12" S80 NIPPLE NPT X PE $ 17.72 1608031211 3"X12" S80 NIPPLE NPT X NPT $ 21.31 1608031213 3"X12" S80 NIPPLE NPT X PLUG $ 32.40 1608031821 3"X18" S80 NIPPLE NPT X PE $ 24.17 1608031811 3"X18" S80 NIPPLE NPT X NPT $ 27.78 1608031813 3"X18" S80 NIPPLE NPT X PLUG $ 38.85 1608032421 3"X24" S80 NIPPLE NPT X PE $ 30.62 1608032411 3"X24" S80 NIPPLE NPT X NPT $ 34.23 1608032413 3"X24" S80 NIPPLE NPT X PLUG $ 45.30 1608041212 4"X12" S80 NIPPLE NPT X PE $ 22.34 1608041211 4"X12" S80 NIPPLE NPT X NPT $ 25.95 1608041213 4"X12" S80 NIPPLE NPT X PLUG $ 37.73 1608041812 4"X18" S80 NIPPLE NPT X PE $ 31.12 1608041811 4"X18" S80 NIPPLE NPT X NPT $ 34.71 1608041813 4"X18" S80 NIPPLE NPT X PLUG $ 46.60 1608042412 4"X24" S80 NIPPLE NPT X PE $ 39.88 1608042411 4"X24" S80 NIPPLE NPT X NPT $ 49.47 1608042413 4"X24" S80 NIPPLE NPT X PLUG $ 55.37

120 1-1/4" SCH 80 1-1/4" 1-1/2" 2" 3" 4" 5" SDR 21 6" 8" 10" 12" 3' 52.89 49.69 62.21 57.91 82.68 98.69 157.03 184.18 284.05 335.37 475.57 4' 62.68 58.41 73.33 69.98 100.49 121.95 188.23 221.98 339.18 401.39 572.86 5' 72.48 67.12 84.45 82.05 118.29 145.22 219.43 259.78 394.33 467.42 670.15 6' 83.05 76.62 96.35 94.12 137.94 170.32 255.27 302.23 502.22 571.82 810.92 7' 96.62 88.72 111.23 109.95 162.41 200.62 297.62 353.95 574.07 659.97 941.64 8' 106.57 98.02 122.52 122.19 180.58 224.25 329.21 392.14 629.83 726.80 1,039.83 10' 125.99 115.25 144.58 146.16 215.83 270.41 391.21 467.35 739.50 858.05 1,233.51 POINT 7.05 6.15 6.21 8.59 17.12 20.40 PLUG 12.83 16.76 28.45 33.39 40.82 88.47 108.84 NPT N/C N/C N/C N/C 4.09 5.46 10.93 10.93 61.45 75.10 81.94 ASTM THD 3.14 3.14 3.40 3.40 5.95 5.71 22.68 25.32 47.80 62.43 75.31 BLANK * PRICE PER FOOT TRI-SEAL ATTACHED W.O.P. SCREENS WIRE WRAPPED ON PLASTIC SLOT SIZES 6-8-10-12-15-18-20-25-30-40-60 3.06 1.84 3.67 3.17 6.62 9.06 12.52 15.46 26.31 36.77 54.84 $ 31.25 $ 28.74 5 X 3 5 X 4 PLAIN OPEN ENDS STANDARD - SPECIFY END FITTINGS SIZES THROUGH 18" AND OTHER SLOT SIZES AVAILABLE UPON QUOTATION

110 1" 1-1/4" 1-1/2" 2" 3" 4" 3' 11.78 12.41 17.55 16.19 34.85 41.46 4' 14.57 15.42 22.20 20.39 42.16 50.99 5" SDR21 6 row 5" SDR21 8 row 5' 17.38 18.43 26.87 24.61 49.48 60.50 89.39 91.92 105.20 6' 22.57 23.83 34.00 31.30 61.32 74.55 7' 25.36 26.84 38.67 35.51 68.63 84.07 8' 28.15 29.83 43.32 39.72 75.95 93.59 6" 8" 10" 12" 10' 33.75 35.85 52.64 48.14 90.59 112.63 156.19 161.26 187.82 315.50 430.68 621.85 15' 52.16 58.02 81.99 76.58 140.52 173.60 242.99 250.59 290.43 20' 64.79 70.34 102.68 94.92 174.40 218.49 304.27 314.41 367.52 606.66 820.76 1,208.53 Point 5.79 6.09 6.15 8.51 16.96 20.21 Plug 12.71 16.61 28.18 28.18 33.08 40.45 87.65 107.83 NPT Thd N/C N/C N/C N/C 4.06 5.41 10.83 10.83 10.83 60.88 74.41 81.18 BLANK * PRICE PER FOOT PVC PLASTIC WELL SCREENS SCHEDULE 40 SAWED SLOT TYPE SLOT SIZES 8-10-12-15-18-20-30-40-60 1.61 1.84 3.67 3.17 6.62 9.06 12.52 12.52 15.46 26.31 36.77 54.84 4 PALLET QUANTITY PRICING ON PAGE 3 NOTE: PLEASE SPECIFY 6 ROW OR 8 ROW FOR 5" NOTE: IF 5" SCREEN HAS 6 ROWS OUR OPEN AREA CHART IS INCORRECT PLAIN OPEN ENDS STANDARD - PLEASE SPECIFY END FITTINGS OTHER SLOT SIZES AVAILABLE UPON QUOTATION NOT ALL SLOT SIZES AVAILABLE FOR ALL PIPE SIZES *PRICES SUBJECT TO CHANGE WITHOUT NOTICE*

110 PVC PLASTIC WELL SCREENS SCHEDULE 80 SAWED SLOT TYPE SLOT SIZES 8-10-12-15-18-20-30-40-60 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 3" 4" 3' 14.18 13.42 13.46 15.72 25.69 25.36 61.36 77.00 4' 17.88 16.87 16.82 19.83 30.66 31.28 77.52 98.37 5' 21.59 20.34 20.18 23.94 35.62 37.18 93.68 119.73 6' 27.51 26.00 25.93 30.44 44.39 44.91 114.35 145.63 7' 31.21 29.46 29.29 34.55 49.36 50.81 130.51 166.98 8' 34.92 32.92 32.65 38.66 54.32 56.73 146.66 188.35 10' 42.34 39.84 39.35 46.88 64.26 68.55 178.98 231.09 15' 63.74 61.93 74.56 100.29 106.20 273.12 349.93 20' 78.31 77.36 92.39 125.13 133.05 351.18 454.05 Point 8.35 5.74 5.54 6.99 6.84 8.60 Plug 12.50 17.51 NPT Thd N/C N/C N/C N/C N/C N/C 4.06 5.41 BLANK * PRICE PER FOOT 2.61 2.33 2.23 3.06 4.89 5.06 16.12 21.91 PLAIN OPEN ENDS STANDARD - PLEASE SPECIFY END FITTINGS OTHER SLOT SIZES AVAILABLE UPON QUOTATION NOT ALL SLOT SIZES AVAILABLE FOR ALL PIPE SIZES *PRICES SUBJECT TO CHANGE WITHOUT NOTICE*

110 PVC PLASTIC WELL SCREENS PALLET QUANTITIES * Pallet prices are for pick up orders only SAWED SLOT TYPE SLOT SIZES 8-10-12-15-18-20-30-40-60 4" PVC PALLET QUANTITY PRICING 4" X 5' PVC - 36 PCS/PALLET $ 54.77 LIST PER LENGTH 4" X 10' PVC - 36 PCS/PALLET $ 101.94 LIST PER LENGTH 4" X 20' PVC - 36 PCS PALLET $ 189.93 LIST PER LENGTH THESE SCREENS WILL BE BANDED IN PALLET QUANTITY AND WILL NOT BE BOXED 5" SDR 21 PVC PALLET QUANTITY WITH 6 ROWS OF SLOTS AT 1/8 SPACING 5 X 20 BELL X PE - 23 PCS/PALLET $ 274.98 LIST PER LENGTH THESE SCREENS WILL BE BANDED IN PALLET QUANTITY AND WILL NOT BE BOXED *PRICES SUBJECT TO CHANGE WITHOUT NOTICE*

140 STAINLESS STEEL WATER WELL SCREENS - 304 SS TELESCOPE or PIPE SIZE COUPLING SIZE O.D. OF SCREEN PER FOOT MALE NPT FITTING FEMALE NPT FITTING PLATE W/ WELD RING 1" 1" 1.315 $ 25.77 $ 28.03 $ 28.71 FLUSH THREAD EACH * THREADED CAST IRON POINT SS POINT 1-1/4" HPS 1-1/4" HPS 1.660 $ 34.18 $ 32.37 $ 30.82 $ 60.35 2" PS 2" 2.375 $ 36.80 $ 41.88 $ 34.85 $ 44.32 $ 82.44 4" TEL 3" 3.750 $ 44.53 $ 72.59 $ 72.59 $ 58.95 $ 103.45 4" PS 4" 4.500 $ 62.74 $ 107.05 $ 120.12 $ 58.95 $ 126.31 5" TEL 4" 4.750 $ 63.07 $ 159.62 $ 120.12 $ 58.95 $ 112.22 5" PS/6" TEL 5" 5.563 $ 63.07 $ 178.80 $ 169.72 $ 58.95 6" PS 6" 6.625 $ 136.31 $ 174.11 $ 169.89 $ 76.21

1701 TRI-SEALS / K-PACKERS Blanks for PVC Screen SOFT Part # HARD Part # Part # Blanks Casing Connect Right x SOFT Right x HARD rings not included, Blank Attached Attached Size Size Note Right Price Right Price see below Price to Screen Price 2" 1-1/4" 170111610 $ 17.52 170131610 $ 6.61 170141610 $ 21.17 3" 1-1/4" 170112410 $ 18.80 170132410 $ 11.03 170142410 $ 25.60 3" 2" 170112416 $ 15.53 170132416 $ 7.41 170142416 $ 21.98 4" 1" 17011328 $ 24.32 17013328 $ 18.43 17014328 $ 33.00 4" 1-1/4" 170113210 $ 22.38 170133210 $ 14.62 170143210 $ 29.18 4" 1-1/2" 170113212 $ 27.78 170133212 $ 14.30 170143212 $ 28.86 4" 2" 170113216 $ 17.87 17011321680 $ 17.87 170133216 $ 9.77 170143216 $ 24.33 4" 2-1/2" 170113220 $ 50.29 170133220 $ 11.03 170143220 * 4" 3" 170113224 $ 39.74 17011322480 $ 41.82 170133224 $ 6.15 170143224 $ 24.74 4-1/8" 3" 170113324 $ 43.27 170133324 $ 7.30 170143324 $ 25.89 4-1/2" 2" 170113616 $ 21.05 170133316 $ 11.03 170143316 $ 25.60 4-1/2" 3" 170113624 $ 41.61 170133624 $ 7.41 170143624 $ 26.00 5" 1" SDR21/SCH40 17011408 $ 24.95 17013408 $ 18.43 17014408 $ 33.00 5" 1-1/4" SDR21/SCH40 170114010 $ 25.89 170134010 $ 18.12 170144010 $ 32.68 5" 2" SDR21/SCH40 170114016 $ 26.55 170134016 $ 18.43 170144016 $ 33.00 5" 3" SDR21/SCH40 170114024 $ 45.54 17011402480 $ 45.54 170134024 $ 12.66 170144024 $ 31.25 5" 3" SDR 17 17011402417 $ 46.50 17013402417 $ 13.93 17014402417 $ 32.52 5" 4" SDR21/SCH40 170114032 $ 67.36 170134032 $ 9.40 170144032 $ 28.74 5-1/8" 4".188 BI-SEAL 170114132 $ 66.54 170134132 $ 8.32 170144132 $ 27.66 5-3/4" 4" 170114632 $ 71.97 170134632 $ 9.58 170144632 $ 28.92 6" 1" 17011488 $ 38.94 6" 3" 170114824 $ 64.42 170134824 $ 26.84 170144824 $ 45.43 6" 4" 170114832 $ 68.44 170134832 $ 12.51 170144832 $ 31.86 6" 5" 170114840 $ 78.03 170134840 $ 12.07 170144840 $ 37.41 6-1/4" 4" 170115032 $ 70.78 17011503280 $ 70.78 170134932 $ 12.80 170144932 $ 32.14 6-1/4" 5" BI-SEAL 170115040 $ 85.33 170135040 $ 12.07 170145040 $ 37.41 8" 6" 170116448 $ 134.77 170136448 $ 21.87 170146448 $ 69.49 Weld-On PVC Ring for use with PVC Blanks Thin Wall Steel Couplings Casing Size Connect Size Length Single Seal Part # Single Seal Price Double Seal Part # Double Seal Price Size Part # Price Right x Right Part # Price 6" 5" 8" 170151658 $ 53.02 1701526581 * 1-1/4" 200310 $ 7.34 1-1/4" 10042101 $ 14.05 6" 5" 12" 1701516512 $ 68.63 1701526512 $ 79.49 2" 200316 $ 7.58 3" 10042241 $ 33.95 8" 6" 8" 170151868 $ 85.56 170152868 * 3" 200324 $ 7.40 4" 10042321 $ 60.88 8" 6" 12" 1701518612 $ 111.94 1701528612 $ 133.81 4" 200332 $ 7.77 5" 10042401 $ 79.61 5" 200340 $ 10.77 * PRICES AVAILABLE UPON REQUEST 6" 200348 $ 30.13 * ALL TRI-SEALS ARE MEANT FOR USE IN SCH40 PVC UNLESS OTHERWISE STATED *PRICES SUBJECT TO CHANGE WITHOUT NOTICE*

1704 SHALE TRAPS / FORMATION PACKERS Part # Description List Price 1704516 5 X 2 SHALE TRAP $ 11.94 170451652 5 X 2 SHALE TRAP W/ 2" CLAMP $ 15.05 170451680 5 X 2 SHALE TRAP - HARD $ 11.63 1704516852 5 X 2 SHALE TRAP - HARD W/ 2" CLAMP $ 14.74 1704616 6 X 2 SHALE TRAP $ 12.66 170461652 6 X 2 SHALE TRAP W/ 2" CLAMP $ 15.77 170461680 6 X 2 SHALE TRAP - HARD $ 12.33 17046168052 6 X 2 SHALE TRAP - HARD W/ 2" CLAMP $ 16.85 1704624 6 X 3 SHALE TRAP $ 14.08 170462454 6 X 3 SHALE TRAP W/ 4" CLAMP $ 17.79 170462480 6 X 3 SHALE TRAP - HARD $ 13.74 17046248054 6 X 3 SHALE TRAP - HARD W/ 4" CLAMP $ 17.42 1704732 7 X 4 SHALE TRAP $ 15.56 170473254 7 X 4 SHALE TRAP W/ 4" CLAMP $ 19.24 170473280 7 X 4 SHALE TRAP - HARD $ 15.14 17047328054 7 X 4 SHALE TRAP - HARD W/ 4" CLAMP $ 18.82 1704832 8 X 4 SHALE TRAP $ 15.56 170483254 8 X 4 SHALE TRAP W/ 4" CLAMP $ 19.24 170483280 8 X 4 SHALE TRAP - HARD $ 15.14 17048328054 8 X 4 SHALE TRAP - HARD W/ 4" CLAMP $ 18.82 1704836 8 X 4-1/2 SHALE TRAP $ 15.56 170483656 8 X 4-1/2 SHALE TRAP W/ 6" CLAMP $ 18.82 170483680 8 X 4-1/2 SHALE TRAP - HARD $ 15.14 17048368056 8 X 4-1/2 SHALE TRAP - HARD W/ 6" CLAMP $ 19.24 1704840 8 X 5 SHALE TRAP $ 18.45 170484056 8 X 5 SHALE TRAP W/ 6" CLAMP $ 22.79 170484080 8 X 5 SHALE TRAP - HARD $ 17.94 17048408056 8 X 5 SHALE TRAP - HARD W/ 6" CLAMP $ 22.28 1704940 9 X 5 SHALE TRAP $ 18.71 170494056 9 X 5 SHALE TRAP W/ 6" CLAMP $ 23.05 170494080 9 X 5 SHALE TRAP - HARD $ 18.71 17049408056 9 X 5 SHALE TRAP - HARD W/ 6" CLAMP $ 23.05 17041048 10 X 6 SHALE TRAP $ 24.97 1704104858 10 X 6 SHALE TRAP W/ 8" CLAMP $ 33.87 1704104880 10 X 6 SHALE TRAP - HARD $ 24.24 170410488058 10 X 6 SHALE TRAP - HARD W/ 8" CLAMP $ 33.14 17041050 10 X 6.9 SHALE TRAP $ 25.30 1704105058 10 X 6.9 SHALE TRAP W/ 8" CLAMP $ 34.20 1704105080 10 X 6.9 SHALE TRAP - HARD $ 24.64 170410508058 10 X 6.9 SHALE TRAP - HARD W/ 8" CLAMP $ 33.54 STAINLESS STEEL CLAMPS 20052 2" STAINLESS STEEL CLAMP $ 3.11 20054 4" STAINLESS STEEL CLAMP $ 3.68 20056 6" STAINLESS STEEL CLAMP $ 4.34 20058 8" STAINLESS STEEL CLAMP $ 8.90

DDS 1706 WP 1707 DRAW DOWN SEAL SIZE OF CASING DROP SIZE PART NUMBER PRICE 4 1 1706328 $ 41.83 4 1-1/4 17063210 $ 39.27 4 1-1/2 17063212 $ 44.67 5 1 1706408 $ 41.83 5 1-1/4 17064010 $ 42.78 5 2 17064016 $ 43.42 6 1 1706488 $ 55.84 6 3 17064824 $ 86.24 PVC WELL PACKER 6-6-1/4 X 4 PVC WELL PACKER $ 77.67 PART NUMBER: 17071485032 * Molded on 4" SCH40 PVC with 6 sealing flanges. 24" long. Flexible, fits 6" or 6-1/4" Can't find what you are looking for? Ask us about our CUSTOM RUBBER MOLDING capabilities!

180 IRRIGATION FILTERS & FILTER CRADLES PART NUMBER DESCRIPTION 40G 180140 40G SUCTION FILTER $ 148.70 1801401 40G W/ CHECK VALVE $ 181.40 1801402 40G W/ FILTER MEDIA $ 163.63 18014012 40G W/ FILTER MEDIA & CHECK VALVE $ 193.78 200600403 TOP OR BOTTOM FOR 40G $ 39.27 180200404 2" SLOTTED CENTER FOR 40G $ 22.33 1802000810 2" SCH80 CLOSE NIPPLE $ 5.38 200600405 PLUG FOR 40G $ 5.61 200600808 FILTER MEDIA FOR 40G $ 8.86 180200806 6" STRAINER BARREL $ 65.50 80G 180180 80G SUCTION FILTER $ 258.91 1801801 80G W/ CHECK VALVE $ 281.22 1801802 80G W/ FILTER MEDIA $ 279.34 18018012 80G W/ FILTER MEDIA & CHECK VALVE $ 301.21 200600801 TOP ONLY FOR 80G $ 46.03 200600802 BOTTOM ONLY FOR 80G $ 34.12 200600809 FILTER MEDIA FOR 80G $ 20.00 STAINLESS STEEL J-HOOK W/ NUT & WASHER * Comes as one j-hook, one nut, and one washer 180200807 $ 5.90 180200805 12" STRAINER BARREL $ 127.52 MISCELLANEOUS GUZZLER PARTS 180200810 2" CHECK VALVE WITH NIPPLE $ 21.88

180 IRRIGATION FILTERS & FILTER CRADLES PART NUMBER DESCRIPTION FILTER CRADLES 18031 TR2 FILTER CRADLE $ 230.59 18034 TR2 ALUMINIUM FILTER CRADLE $ 350.86 18033 TR2 HEAVY DUTY FILTER CRADLE $ 255.40 18032 TR2 AGRICULTURAL FILTER CRADLE $ 498.39 180340 BIG FOOT IRRIGATION STAND FOR 40G $ 69.58 180380 80G FILTER CRADLE $ 220.68 18035 L2 UNIT $ 91.74 18036 BIG FOOT POND SCREEN SLED $ 190.11 18053280 4" WOP SCREEN FOR POND SLED 80" $ 250.37 FILTER CRADLE ACCESSORIES 18041 LF BRACKET $ 54.55 18044 T-POST KIT $ 57.03

190 ENVIRONMENTAL & MORRISON PRODUCTS * NON-STOCK ITEMS, PLEASE CALL FOR PRICING ITEM NUMBER DESCRIPTION 190116780000 678XA: 2" LOCKING PLUG $ 52.18 190116780100 678XA: 4" LOCKING PLUG $ 57.73 190116 678XA: 6" LOCKING PLUG $ 110.03 * OTHER SIZES AVAILABLE UPON QUOTATION 418XA: 7 X 10 LIMITED ACCESS MANHOLE 190127101 QTY 1: 1-59 $ 120.01 190127102 QTY 2: 60-119 $ 108.04 418XA: 8 X 12 LIMITED ACCESS MANHOLE 190128121 QTY 1: 1-59 $ 131.75 190128122 QTY 2: 60-119 $ 119.20 1901297 418XA: 9 X 7 LIMITED ACCESS MANHOLE * 19012912 418XA: 9 X 12 LIMITED ACCESS MANHOLE * 19012127 418XA: 12 X 7 LIMITED ACCESS MANHOLE * 418XA: 12 X 12 LIMITED ACCESS MANHOLE 1901212121 QTY 1: 1-19 $ 205.99 1901212122 QTY 2: 20+ $ 181.68 1901291200 1901211212 418XAW: 9 X 12 LIMITED ACCESS MANHOLE (WELDED SKIRT) 418XAW: 12 X 12 LIMITED ACCESS MANHOLE (WELDED SKIRT) * *

190 ENVIRONMENTAL & MORRISON PRODUCTS * NON-STOCK ITEMS, PLEASE CALL FOR PRICING ITEM NUMBER DESCRIPTION 190121812 418TM: 18 X 12 TANK MONITOR MANHOLE * 190121818 418TM: 18 X 18 TANK MONITOR MANHOLE * 190122418 418: 24 X 18 LIMITED ACCESS MANHOLE * 519: 9" WATERTIGHT MANHOLE 1901251991 QTY 1: 1-19 $ 367.70 1901251992 QTY 2: 20+ $ 330.96 1901251912 519: 12" WATERTIGHT MANHOLE * 19012242424 524: 24 X 24 X 24 LIMITED ACCESS MANHOLE $ 691.15 524: 24 X 24 X 24 LIMITED ACCESS MANHOLE 190122424241 * (WITH HANDLE) 19019445 4 X 4 X 5 WELL PROTECTOR $ 193.63 19013665 680XA: 6 X 6 X 5 WELL PROTECTOR $ 249.26 19013885 680XA: 8 X 8 X 5 WELL PROTECTOR $ 467.84

220 ACCESSORY PARTS PERFORATED PVC PIPE BY QUOTATION 1-1/4" & 2" WASHDOWN VALVE PART NUMBER 22011040 1-1/4" SCH40 WASHDOWN VALVE $41.53 22011080 1-1/4" SCH80 WASHDOWN VALVE $42.50 22011640 2" SCH40 WASHDOWN VALVE $52.46 22011680 2" SCH80 WASHDOWN VALVE $53.49 PITTLESS WRENCH T-HANDLE PART NUMBER 22027 7 FOOT $55.21 22028 8 FOOT $57.56 STAINLESS STEEL CENTRALIZERS PART NUMBER 220321 220322 220323 220324 220325 1" 2" 3" 4" 5" PRICES AVAILABLE UPON QUOTATION * other sizes available upon quotation *PRICES SUBJECT TO CHANGE WITHOUT NOTICE*