Contents Important Safety Notice Your dash cam Introduction What's in the box Get started Install the dash cam Insert Micro SD card Turn on the dash cam Mode switch Video recording Video settings 6 6 Photo capture Photo settings 6 7 6 Playback Video playback 7 7 7 Connect the dash cam to a computer 7 8 System settings 8 9 Product information 9 0 Solutions of common problems 0 0
Important Safety Read and understand all instructions before you use your apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. Use only the supplied mounting hardware for a safe and secure installation. Only use attachments/accessories specified by the manufacturer. To avoid short circuit, do not expose the apparatus to rain or water. Never insert objects into the ventilation slots or other openings on the apparatus. Clean the apparatus and frame with a soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the apparatus. Risk of damage to the apparatus screen! Never touch, push, rub or strike the screen with any object. Batteries shall not be exposed to excessive heat such as sunshine, fire. For your own safety, do not operate the device while driving. To void accident caused by exhaust of car battery, disconnect the car charger before leaving the car for the users whose car cigarette lighter keeps power supplying after the engine is stopped. When the car engine is stopped or the power is shut down, the device still can save the recording files with its built-in battery power, do not remove the micro SD card during the period to prevent data loss. The apparatus shall not be exposed to dripping or splashing. Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). Notice. Do not install the device at any place that may distract the driver s attention or block the driver s sight.. The TF card needs to be formatted before the first use.. The setting function of the menu button should be operated when the video recording is stopped.. The emergency video cannot be covered by loop recording; Please regularly clean out the TF card to avoid affecting the storage space. Your dash cam Introduction With the dash cam, you can: Record videos automatically when you are driving Take photos Playback videos/photos What's in the box Check and identify the contents of your package: 0 Dash cam Suction bracket Car charger User Manual
9 7 6 8 Power button Five direction key (up, down, left, right, OK) 6 Front lens 7 Mount socket 8 Reset 9 Speaker Screen Recording indicator light Charging indicator light Up direction key OK Right direction key Down direction key Left direction key 0
Get started Install dash cam Caution Do not place the dash cam in locations where it may block the driver's view or affect the operation of airbags. Note In order to get clear images, if there is any smudginess on the windshield, please clean it before installing. Connect the dash cam with the suction bracket below: 6 Connect the car charger to: The mini USB socket of the dash cam The cigarette lighter socket of the car. The wiring cable can run through the edge of your windscreen. Put the cable through gaps in your car s a-pillar. Wipe clean the windshield. Remove the protective cover of the suction bracket and rotate the fix button of suction. Pull wrench, sucker adsorbed on the cleaned area. The sucker is not close to glass, press wrench to fix the DVR on the appropriate location. 0
To remove the micro SD card Insert Micro SD card Push the card inwards until you hear a "click". Caution The card is disengaged. For reliable operation, please use a genuine 8-6G micro SD card (class 0 or more, bounced read speed 80M / S above), or the carema might not be able to operate functionally. Insert the micro SD card before using the dash cam. Insert the micro SD card with the right direction. Wrong direction may damage the dash cam and the card. Turn on the dash cam Press to turn on the dash cam. To turn off the dash can, press and hold for more than seconds. Note When using for the first time, please set the date/time. Card Capacity 080P 0FPS 70P 60FPS 70P 0FPS GB 0min 60min 80min 6GB 60min 70min 960min Note When using for the first time, please format the micro SD card to ensure videos are recorded normally. Insert a micro SD card into the card slot until you hear a "click". For the first time use After the dash cam is turned on, format the micro SD card. Format SD card Press twice to access system setting menu. Press to select format micro SD card menu and then press to enter the menu. Select card. to format the micro SD Mode switch Press repeatedly to select the video recording mode, photo capture mode or playback mode. Press twice to access system setting menu. 0
Video Recording When the dash cam is turned on, video recording starts automatically. Video recording screen: 00:00:00 080FHD 0.00GB HDR 0 INT 08/0/0 0::08 Video resolution Record time Digital effect GSENSOR White balance Press to select an option. Resolution Loop recording Time-lapse Record HDR Exposure Motion Detection Record Audio Date Stamp GSENSOR Parking Monitor Note Press to exit the sub-menu, press to exit the video settings menu. again Photo capture In photo capture mode, press to take photos. Note 78 The dash cam will continue running for a while after the engine is shut down to protect last recorded file. 0 AWB ISO AUTO Video settings In video recording mode, press enter video settings menu. Press / to toggle through the sub-menus and press to enter the sub-menu. 06 to M
Under stopping status of video recording mode, Press twice to enter video/photo playback mode. Photo settings In photo capture mode, press enter photo settings menu. to Press / to toggle through the sub-menus and press to enter the sub-menu. Press / to select an option and press to confirm. You can adjust the following settings: Capture Mode Resolution Sequence Quality Sharpness White Balance Color ISO Exposure Anti-Shaking Quick-Review Date Stamp 6 Playback Press / to select a video, press to play the video/photo. Playback, press to manage videos, you can delete the current video, all videos. Press to return to video recording mode. During playback, you can pause/restart the video, delete the video, or slide show. 7 Connect the dash cam to a computer When the dash cam is connected to a computer, the micro SD card will be automatically recognized. You can then copy videos or photos from the micro SD card to your computer. Video playback Playback Delete Protect Mini USB cable is not included. Slide Show / 07
8 System settings Press Press sub-menu. to enter system settings menu. / to toggle through the sub-menus and press to enter the Press / to select an option and press to confirm. Press to exit the sub-menu, press again to exit the system setting menu. You can adjust the following settings: Date/Time Set date and time. Auto Power Off Turn off driving recorder in a period of time. Min 0 Min Min Off Min Beep Sound Turn the beep sound on or off. On Off Language Select a language. English Portuguese German French Frequency Select the frequency. 0Hz 60Hz Spanish Italian Turn on/off Screen Saver. Screen Saver 08 Off Min Min Min Format Format the micro SD card. Cancel OK Default Setting Reset to default settings. Cancel OK Version The current software version. Simplified Chinese Traditional Chinese
9 Product information Note Product information is subject to change without prior notice. LCD screen size.0 LTPS(:) Camera lens SONY IMX Video resolution 90X080P 0FPS Video MOV (H.6) Photo resolution M Photo format JPEG Micro SD card 8GB-6GB Class 0 or above TF card (not included) Mic/speaker Built-in USB port Micro USB Car charger DC V A Battery Built-in lithium polymer battery 09
0 Solutions of common problems In the process of installing the cam. Suction cup falls off & Unstable. A: Please tear off the protective film on the suction cup before installation. B: Please clean the windshield before installation. C: Check whether the suction cup has been installed in right way. The suction cup installation of this cam is not simply adsorption. It needs to install through the black wrench on the suction cup.. View files on the cam and find that images are blurred. The front windshield has reflective effect. Please adjust the angle of the machine according to the installation position of the suction cup.. The cam often shut down or can not be connected to power supply. A: The interior design varies from car to car. Please adjust the rotation angle of vehicle power adapter properly and ensure the stable link between machine and power supply. B: The built-in battery of the machine can only last for 0- minutes. When you use it, please connect it to power supply. C: Check if there is any damage to the power lead so as to ensure the power supply of the machine. D: If the cam can't be used in the car, try to connect the cam to other power source to see whether the power supply of the car cigar lighter is normal. In the process of turning on/setting the cam. The cam can't be turned on. A: Confirm whether the indicator of the power adapter is on or not. If there is no light, please replug in the car charger and ensure the power supply of the cam. B: The cam cannot function alone for long. The built-in battery can only be used for about 0- minutes. Please connect the cam to cigarette lighter via the car charger in the package. C: Press Reset button in the back of the dash cam to reset the cam. 0
D: After being connected to power supply. The red light indicator on the top left of the screen flashes once and then the cam will turn on. The blue light indicator will keep on during your use. This can help you judge whether the cam is power supplied normally.. Keeps turning on and off. A. Reset the camera to default setting. Under the stop status of recording mode, press right button twice to enter setting menu. Then press down button to select Default setting then choose OK. B. Back up the SD card data first, then format the sd card in dash cam. Move toggle switch to right direction to entry setting option---->select "Format"---->Choose "OK". C. Set Gsensor sensitivity to Medium level. And turn off parking monitor. Under the stop status of recording mode, press right button to enter video setting menu, then press down button to choose Gsensor, then select sensor sensitivity Medium. The cam freezes & Screen goes black & Buttons do not work. A: Check whether your card is class 0, 8-6GB, SDHC TF card. B: Long press the power button to force the shutdown to restart. C: Press Reset button to reset the cam.. Unable to access menu settings (No response by pressing menu button). The cam will stay in video mode after being turned on and will start recording automatically if you have inserted a SD card. Press OK button to stop recording first. Then press right direction button to enter settings.. The screen goes blue and prompts mass storage. When you connect the cam to computer or power source with low voltage, it is normal that the cam prompts mass storage. You should use the USB cable in the package to connect the cam to power supply with normal voltage.
In the process of video recording. The cam won't record after being turned on. A: Confirm whether a TF card has been inserted. Check the format of the card (Class 0, no bigger than 6GB). B: Turn off the cam, remove the card and insert it again. C: Format the card on the cam.. Abnormal video recording ending. A: Format the card. B: Check whether the format of the memory card is correct. C: Change to a correct qualified card to see if it is a card failure. D: There are many poor memory cards in the market. The quality of these cards is bad and will affect the use of the cam.. Screen goes black. The screen will go black if there is no operation on the cam within the set time interval even during recording. You can press any button to wake the cam up.. Videos have no audio. Check whether the audio recording is turned on. You can check it via the microphone sign on the screen. If not, press down button to active microphone recording.. Blurred videos. A:Remove the protective film on the lens and clean the lens B: Remove the protective film on the screen C: Due to the screen size and influence of resolution, there will be difference on visual experience. So please transfer the videos to your computer and view them again. D: Check the resolution of the cam. Choose higher resolution. E: The video mode and photo mode are set independently. Please set the resolution of video recording and photo shooting separately. F: Check whether the format of the memory card is correct.
6. Big difference on quality of videos recorded in daytime and at night. The transmittance of commonly used car front glass thermal insulation film is 68%-80%, which will affect the recording effect of machine. 7. Video time error. A: Update to the right time according to the user manual B: When the cam is plugged in the cigarette lighter, the time won't be changed due to ending of video recording. In the process of connecting the cam to computer. Unable to read storage and can't find the connection device. A: Reinsert the USB cable to ensure a stable connection. B: Change to another USB cable and check whether there is something wrong with the cable. C: Connect the cam to different computers because some computer systems will prevent the external devices. D: Use the card adapter to read file. Remove the micro SD card from the dash cam. Use the micro SD card adapter to connect the card to a computer.