Operating temperature T a

Similar documents
Smart High-Side Power Switch BSP742RI PG-DSO8. AEC qualified Green product (RoHS compliant)

Smart High-Side Power Switch for Industrial Applications One channel: 1 x 1 Ω

Industrial PROFET. Universal Application Board User s Manual

TLS202B1. Demonstration Board Manual. Automotive Power. Demonstration Board Manual. Rev. 1.0,

Application Note No. 097

PROFET TM + Demoboard. Automotive Power. Smart High-Side Power Switch - Demoboard Description. Rev. 1.4,

NovalithIC H-Bridge Demo Board

Application Note, V1.0, Jul AP08049 XC886/888CLM. Migration of Flash to ROM Device: Memory Protection Configurations.

ESD8V0L... ESD8V0L1B-02LRH. Type Package Configuration Marking ESD8V0L1B-02EL

Scope: SW Installation: Start the Package PROG-KIT. Current. Page 1

RF Power Product Selection Guide LDMOS Transistors and ICs

Chip Card & Security ICs SLE Intelligent 1024 Byte EEPROM with Write Protection and Programmable Security Code

Chip Card & Security ICs SLE Intelligent 256-Byte EEPROM with Write Protection function and Programmable Security Code

ESD5V3U4RRS. Type Package Configuration Marking ESD5V3U4RRS SOT363 6 pins, uni-directional E8s

Application Note, V 1.1, Apr AP08006 C868. Interfacing SPI/I2C Serial EEPROM with C868 Microcontroller. Microcontrollers. Never stop thinking.

LOW EMI PWM INTELLIGENT POWER HIGH SIDE SWITCH

Absolute Pressure Sensor

Application Note, V1.0, Aug AP08064 XC866/886/888. Safeguarding the Microcontroller under Out-of-Spec Noise Conditions.

Design Guideline for TC1782 Microcontroller Board Layout

Application Note, V 1.1, Feb AP DAP Connector. Microcontrollers

ASCLIN Asynchronous Synchronous Interface

TLT807B0EPV Demoboard

TLx5012B 2go Evaluation Kit

AP XC2000 & XE166 Families. Design Guidelines for XC2000 & XE166 Microcontroller Board Layout. Microcontrollers

Application Note No. 100

Power Management & Drives. Application Note. February AN-EVAL 2x8-ISO1H815G-1

Design Guideline for TC1791 Microcontroller Board Layout

Application Note TLE9252V. About this document. Application Note. Safety Recommendations Z8F

SPI Protocol of the TLE941xy family

Application Note, V1.3, September 2008 AP XC2000/XE166 Family. Microcontrollers

XE166 Family AP Application Note. Microcontrollers. X E D r i v e C a r d H a r d w a r e D e s c r i p t i o n Board REV.

Relaisdriving with HITFETs and SPIDERs

Application Note, V 1.0, April 2005 AP32086 EMC. Design Guideline for TC1796 Microcontroller Board Layout. Microcontrollers. Never stop thinking.

Sensor supply in bus mode

Design Guideline for TC1798 Microcontroller Board Layout

XC2000 Family AP Application Note. Microcontrollers. XC2236N Drive Card Description V1.0,

Security & Chip Card ICs SLE 55R04. Intelligent 770 Byte EEPROM with Contactless Interface complying to ISO/IEC Type A and Security Logic

Dual H-Bridge shield. Dual H-Bridge shield - board user manual. Shield for DC motor control with IFX9202. About this document.

XE166 Family AP Application Note. Microcontrollers. UConnect XE162N Hardware Description V1.0,

XMC1000 EEPROM emulation and data retention

SPOC +2 User Manual Multichannel SPI High-Side Power Controller

TxD GND V CC. RxD WAKE V IO SCLK MISO. (Top-side x-ray view) SCLK INH

Security & Chip Card ICs SLE 4436/36E

IMPORTANT NOTICE. use

Application Note AN V1.3 August Module with adapted driver electronics

Documentation Addendum, V1.2, Aug TC Bit Single-Chip Microcontroller Delta BC-to-BE Step. Microcontrollers

CRC Computation using PCP

XE164 UConnect Manual, V.1.1, February XE164 UConnect. Board REV. 2007/40. Microcontrollers. Never stop thinking.

Application Note, V1.0, November AP XC2000/XE166 family. ADC Result Handling on XC2000/XE166 family of Microcontrollers.

BME280 Combined humidity and pressure sensor

Application Note - PCB Layout & PIN Behavior Assessment

XMC LED current control explorer kit

AOZ8312. Low Capacitance 2.5 V TVS Diode. Features. General Description. Applications

AOZ8251. One-line Bidirectional TVS Diode. Features. General Description. Applications. Signal Line

Low forward voltage Ultra small SMD plastic package Low capacitance Flat leads: excellent coplanarity and improved thermal behavior

PNP 500 ma, 50 V resistor-equipped transistor; R1 = 2.2 kω, R2 = open

U qj fxj styj ymj sj ufhpflj inrj sxntsxfwhhtwinsl yt U H S 755>26892F

3D Magnetic Sensor 2 Go - TLE493D-A2B6

Easy Kit Board Manual

U qj fxj styj ymj sj ufhpflj inrj sxntsxfwhhtwinsl yt U H S 755>26892F

CPC1824NTR. 4V Output Solar Cell INTEGRATED CIRCUITS DIVISION

Total power dissipation: 500 mw Small plastic package suitable for surface-mounted design Wide working voltage range Low differential resistance

AOZ8234. Four-line TVS Diode

500mW 5% Zener Diodes

BMP280 Digital pressure sensor

EMIF06-HMC02F2. 6-line IPAD, EMI filter including ESD protection. Description. Features. Applications. Complies with the following standards

Queued SSC V

PRTR5V0U2X Ultra low capacitance double rail-to-rail ESD protection diode Rev January 2008 Product data sheet

U qj fxj styj ymj sj ufhpflj inrj sxntsxfwhhtwinsl yt U H S 755>26892F

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Broadband system applications i.e. WCDMA, CATV, etc. General purpose Voltage Controlled Attenuators for high linearity applications

The IP4790CZ38 can be used with a range of DisplayPort devices including: Personal computer PC monitor Notebook

500mW, 5% Tolerance SMD Zener Diodes

NCR402T. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

500mW, 5% Tolerance SMD Zener Diodes

500mW, 2% Tolerance SMD Zener Diode

XC82x/XC83x. DMX512 Receiving Device with XC836. Application Note. Microcontrollers AP08131 V1.1,

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

500mW, 2% Tolerance Zener Diodes

IP4770/71/72CZ Applications. 4. Ordering information. Functional diagram. NXP Semiconductors. VGA/video interface with ESD protection

AOZ8882. Ultra-Low Capacitance TVS Diode Array. General Description. Features. Applications. Typical Application

AP16050 SAB C161V/K/O. Emulating an asynchronous serial interface (ASC) via software routines. Microcontrollers. Application Note, V 1.0, Feb.

U qj fxj styj ymj sj ufhpflj inrj sxntsxfwhhtwinsl yt U H S 755>26892F

Dual back-to-back Zener diode

500mW, 5% Tolerance SMD Zener Diodes

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Ultra low capacitance ESD protection for Ethernet ports. ESD protection high-frequency AC-coupled Ethernet ports

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PMEG3015EH; PMEG3015EJ

500mW 5% Zener Diodes

2-Line BUS-Port ESD-Protection - Flow Through Design FEATURES VBUS052CD-FAH VBUS052CD-FAH-GS MOLDING COMPOUND FLAMMABILITY RATING

General-purpose Zener diodes in a SOD323F (SC-90) very small and flat lead Surface-Mounted Device (SMD) plastic package.

U qj fxj styj ymj sj ufhpflj inrj sxntsxfwhhtwinsl yt U H S 755>26892F

550 MHz, 34 db gain push-pull amplifier

PMEG1030EH; PMEG1030EJ

PESD5V0U2BT. 1. Product profile. Ultra low capacitance bidirectional double ESD protection diode. 1.1 General description. 1.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Preamplifier Circuit for IR Remote Control

ESDA7P60-1U1M. High power transient voltage suppressor. Description. Features. Applications. Complies with the following standards:

Transcription:

Ω Operating temperature T a -24 Green Product (RoHS Compliant) General Description N channel vertical power FET with charge pump, ground referenced CMOS compatible input, monolithically integrated in Smart SIPMOS technology. Providing embedded protective functions. Data Sheet 1 Rev.1.1, 2008-09-29

Data Sheet 2 Rev.1.1, 2008-09-29

± Junction temperature Operating temperature T a Storage temperature T stg P tot Ω Ω ± ± Ω Data Sheet 3 Rev.1.1, 2008-09-29

Ω T C Ω Ω Ω Ω Data Sheet 4 Rev.1.1, 2008-09-29

Δ Ω Data Sheet 5 Rev.1.1, 2008-09-29

Δ kω Data Sheet 6 Rev.1.1, 2008-09-29

Ω = + + Data Sheet 7 Rev.1.1, 2008-09-29

Ω = + + Data Sheet 8 Rev.1.1, 2008-09-29

Ω Ω Data Sheet 9 Rev.1.1, 2008-09-29

Ω Ω Ω Ω Data Sheet 10 Rev.1.1, 2008-09-29

Data Sheet 11 Rev.1.1, 2008-09-29

Data Sheet 12 Rev.1.1, 2008-09-29

Ω L Data Sheet 13 Rev.1.1, 2008-09-29

on off Data Sheet 14 Rev.1.1, 2008-09-29

Data Sheet 15 Rev.1.1, 2008-09-29

Package Outlines 1 Package Outlines 0.35 x 45 0.41 1.27 +0.1 2) -0.06 0.175±0.07 (1.45) 1.75 MAX. 0.1 0.2 M A B 8x B 1) 4-0.2 6 ±0.2 C +0.06 0.19 0.64 ±0.25 8 MAX. 0.2 M C 8x 8 5 1 4 1) 5-0.2 A Index Marking 1) Does not include plastic or metal protrusion of 0.15 max. per side 2) Lead width can be 0.61 max. in dambar area GPS01181 Figure 1 PG-DSO-8-24 Green Product (RoHS compliant) To meet the world-wide customer requirements for environmentally friendly products and to be compliant with government regulations the device is available as a green product. Green products are RoHS-Compliant (i.e Pb-free finish on leads and suitable for Pb-free soldering according to IPC/JEDEC J-STD-020). For further information on alternative packages, please visit our website: http://www.infineon.com/packages. Dimensions in mm Data Sheet 16 Rev.1.1, 2008-09-29

Revision History 2 Revision History Revision Date Changes 1.1 2008-09-29 all pages: added new Infineon logo Initial version of RoHS-compliant derivate of the ISP772T Page 1 and 17: added RoHS compliance statement and Green product feature Page 1, 17: Package changed to RoHS compliant version Page 18: added Revision history Page 19: update of disclaimer Data Sheet 17 Rev.1.1, 2008-09-29

Edition 2008-09-29 Published by Infineon Technologies AG 81726 Munich, Germany 2008 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.