Figure 1. Level Data: total possible: 32 mean: 8.19 SD: 5.98 low: draft 1
|
|
|
- Hubert Anthony Garrett
- 5 years ago
- Views:
Transcription
1 Figure 1. Explanation: HMD was held still with large cluster of polygons in center of field of view. The level goes from 32 quickly to 5 or so, then oscillates between 4 and 8. The frame rate starts at 20 and quickly falls to 6, then climbs up to 20 and oscillates between 20 and 25. number of polygons in scene: 18,000 number of frames: 176; (approx. 8 seconds) mean: SD: 7.12 low: 5.88; high: percentage at or above desired rate: 79% percentage at or above 75% of desired rate: 88% mean: 8.19 SD: 5.98 low: 4 94 draft 1
2 Figure 2. Explanation: Close-up of the previous graph at point where frame rate begins to clear the 20Hz threshold. Note that when the frame rate drops from 25 to 20, the system drops the level until it goes back up to 25, then increases the level until it drops back to 20. This oscillation guarantees that the system is always doing as much as it can. 94 draft 2
3 Figure 3. Explanation: With a light load, the system quickly achieves and holds the desired frame rate with the level at 32. Oscillation from 25Hz to 33.3Hz is probably due to varying system load. number of polygons in scene: 550 number of frames: 220; (approx. 11 seconds) mean: SD: 6.93 low: 14.29; high: percentage at or above desired rate: 99% percentage at or above 75% of desired rate: 100% mean: SD: 5.66 low: draft 3
4 Figure 4. Explanation: Here, the HMD is always looking at a large cluster of polygons, but at about the 45th frame, the slow motion button is held down for about 17 frames, which sends the level up to 32 and the frame rate down to about 5. Once the button is released, the system returns to its previous state. Note that the percentage at or above the desired rate (listed below) suffers because of the use of the slow-motion button. When the button is not pressed, the system does quite well at reaching the desired frame rate. number of polygons in scene: 18,000 number of frames: 121; (approx. 6 seconds) mean: SD: 9.30 low: 5.00; high: percentage at or above desired rate: 61.98% percentage at or above 75% of desired rate: 66.94% mean: SD: low: 3 94 draft 4
5 Figure 5. Explanation: With a light load, the slow motion button has practically no effect, since the level is already around 32. number of polygons in scene: 550 number of frames: 352; (approx. 17 seconds) mean: SD: 7.13 low: 7.14 high: percentage at or above desired rate: 99.15% percentage at or above 75% of desired rate: 99.72% mean: SD: 5.66 low: draft 5
6 Figure 6. Explanation: The desired frame rate is set here to an impossibly high value (50). The system cannot meet this performance level and keeps dropping the level to try to improve performance. The level bottoms out at 1 (the minimum) except when the slow motion button is pressed. number of polygons in scene: 550 number of frames: 275; (approx. 5 seconds) desired rate: mean: SD: 7.15 low: 7.14 high: percentage at or above desired rate: 0.36% percentage at or above 75% of desired rate: 0.36% mean: 9.23 SD: low: 1 94 draft 6
7 Figure 7. Explanation: In this interactive session, the user is initially looking away from the polygon cluster, then looks at it (as the level decreases) then presses the slow motion button, then releases it, then looks away. The load and frame rate vary accordingly. number of polygons in scene: 18,000 number of frames: 297; (approx. 14 seconds) mean: SD: 6.79 low: 6.25 high: percentage at or above desired rate: 88.22% percentage at or above 75% of desired rate: 91.58% mean: SD: low: 5 94 draft 7
8 Figure 8. Explanation: This longer session had the user actually walking around the model and using the slow motion button (once briefly at 450 frames, then again from 550 to 600 frames.) The dark stripe above the 20Hz line shows that the frame rate was usually above the requested rate. number of polygons in scene: 37,000 number of frames: 913; (approx. 45 seconds) mean: SD: 8.02 low: 3.45 high: percentage at or above desired rate: 85.87% percentage at or above 75% of desired rate: 91.57% mean: 9.21 SD: 7.86 low: 1 94 draft 8
KNX function and configuration
2 KNX function and configuration Introduction A presence detector monitors the detection zone for occupancy, and causes one or more actions to be executed when a person enters the detection area. In their
Functional description. Use of the application program. GAMMA instabus Application program description. June C0 Sensor Switch
Use of the application program Functional description Product family: Product type: Manufacturer: Push button Push button, 1 4 fold Siemens The touch sensors have one, two or four vertically arranged pairs
Use of the application program
Use of the application program Product family: Product type: Manufacturer: Name: Order no.: Name: Order no.: Name: Order no.: Name: Order no.: Name: Order no.: Name: Order no.: Name: Order no.: Name: Order
NEXT BACK 1. Animania!
NEXT BACK 1 Animania! NEXT BACK 2 About Animania! Animania! is a catalogue of ready-to-use Animal models and motions. If you have built your own models and boned it or set up a segmented model for animation,
3D Starfields for Unity
3D Starfields for Unity Overview Getting started Quick-start prefab Examples Proper use Tweaking Starfield Scripts Random Starfield Object Starfield Infinite Starfield Effect Making your own Material Tweaks
Goals: - to be able to recognize the position-time, velocity-time and acceleration-time graphs of each of these main types of motion:
Unit: One-Dimensional Kinematics Level: 1 Prerequisites: None Points to: Goals: - to be able to recognize the position-time, velocity-time and acceleration-time graphs of each of these main types of motion:
[February 1, 2017] Neural Networks for Dummies Rolf van Gelder, Eindhoven, NL
![[February 1, 2017] Neural Networks for Dummies Rolf van Gelder, Eindhoven, NL](/thumbs/72/66535788.jpg "[February 1, 2017] Neural Networks for Dummies Rolf van Gelder, Eindhoven, NL")
[February 1, 2017] Neural Networks for Dummies 2017 Rolf van Gelder, Eindhoven, NL Contents Introduction... 2 How does it work?... 4 Training a Network... 4 Testing / Using a Network... 4 The Test Case:
1. UC-win/Road Ver. 13
1. UC-win/Road Ver. 13 In Ver.13, we developed a number of new features including: Earthwork volume calculation, Enhanced VR data creation and Enhanced simulation functions. In addition the interfaces
Bitbox User s Manual
Bitbox User s Manual Welcome to bitbox. Bitbox is a very useful tool for capturing and playing back samples. This manual will walk you through all of the features of bitbox. If you want to start playing
Iray Worlds-Plus User Guide
Iray Worlds-Plus User Guide DEFAULT SCENES These are very simple and easy to understand, the 1st is empty and the others have different types of trees, or skies added. These are either beginning scenes,
user guide AbiBird You will need The AbiBird Sensor and An iphone with ios 10+ OR A Smartphone with Android 5+
AbiBird user guide AbiBird is an intelligent home activity sensor that connects to a smartphone App. Once set up, the free-standing AbiBird Sensor counts the movements of someone walking past and displays
What s New? By George Harding
July 18, 2016 What s New? By George Harding Remocam This is a home security device that uses WiFi, a camera and a smartphone to view a scene for you to see and transmit images of it. The setup process
Froment. SIGMA IHT Version 4 - Quickstart Guide
SIGMA IHT Version 4 - Quickstart Guide This Quickstart guide, along with the in-built help, will help you get the best out of your Sigma IHT. The Sigma Intelligent Hand-held Terminal (IHT) provides full
The standard deviation 1 n
The standard deviation 1 SD = (xj x) n 2 The SD gives a measure of how the data are clustered around the mean. If the SD is larger, then the data are more spread out we are more likely to find data that
Scalable many-light methods
Scalable many-light methods Jaroslav Křivánek Charles University in Prague Instant radiosity Approximate indirect illumination by 1. Generate VPLs 2. Render with VPLs 2 Instant radiosity with glossy surfaces
PRODUCT MANUAL LUZEN PLUS. Universal Dimmer ZN1DI-P400. Program version: 3.0 Manual edition: a
PRODUCT MANUAL LUZEN PLUS Universal Dimmer ZN1DI-P400 Program version: 3.0 Manual edition: a INDEX Document updates... 3 1. Introduction... 4 1.1. LUZEN PLUS... 4 1.2. Types of load... 5 1.3. Installation...
Speed Controller ZSU A01
ZSU A01 The ZSU speed controller is a monitor of rotating or oscillating machine parts. The speed controller continuously compares the set speed with the actual speed and produces a switching output in
Gʼz EYE. Introduction
MA1710-B 2017 CASIO COMPUTER CO., LTD. Introduction Contents What you can do with App Top Screen Connecting to a Camera Registering the Camera on the App Establishing a Wireless LAN Terminating a Checking
Dell Dynamic Power Mode: An Introduction to Power Limits
Dell Dynamic Power Mode: An Introduction to Power Limits By: Alex Shows, Client Performance Engineering Managing system power is critical to balancing performance, battery life, and operating temperatures.
Blender Animation Editors
Blender Animation Editors Animation Editors Posted on September 8, 2010 by mrsiefker Blender has several different editors for creating and fine tuning our animations. Each one is built around a specific
Distribution Ray-Tracing. Programação 3D Simulação e Jogos
Distribution Ray-Tracing Programação 3D Simulação e Jogos Bibliography K. Suffern; Ray Tracing from the Ground Up, http://www.raytracegroundup.com Chapter 4, 5 for Anti-Aliasing Chapter 6 for Disc Sampling
Ms Nurazrin Jupri. Frequency Distributions
Frequency Distributions Frequency Distributions After collecting data, the first task for a researcher is to organize and simplify the data so that it is possible to get a general overview of the results.
CS755 CAD TOOL TUTORIAL
CS755 CAD TOOL TUTORIAL CREATING SCHEMATIC IN CADENCE Shi-Ting Zhou shi-ting@cs.wisc.edu After you have figured out what you want to design, and drafted some pictures and diagrams, it s time to input schematics
33 QUESTIONS PER MINUTE PROJECTION VERSION BY RAFAEL LOZANO-HEMMER
33 QUESTIONS PER MINUTE PROJECTION VERSION BY RAFAEL LOZANO-HEMMER TABLE OF CONTENTS GENERAL IMPORTANT INFORMATION Technique..........................................4 Description..........................................4
Analysis & Synthesis of Narrative Two applications
Analysis & Synthesis of Narrative Two applications Casablanca movie - middle scene 43 Mapping and tracking emotion Short look at: stochastic analyses of structure and style Supporting collective, collaborative
Mini Recessed PIR. Model: PDFM360MINI. Installation & Operating Instructions
Mini Recessed PIR Model: PDFM360MINI Installation & Operating Instructions 1 1. General Information These instructions should be read carefully and retained for further reference and maintenance. 2. Safety
Viper: A Quasi-Real-Time Virtual-Environment Application
Viper: A Quasi-Real-Time Virtual-Environment Application Richard L. Holloway Department of Computer Science University of North Carolina Chapel Hill, NC 27599-3175 Abstract When creating a virtual-environment
Universiteit Leiden Computer Science
Universiteit Leiden Computer Science Optimizing octree updates for visibility determination on dynamic scenes Name: Hans Wortel Student-no: 0607940 Date: 28/07/2011 1st supervisor: Dr. Michael Lew 2nd
COINTRAX II USER MANUAL. HAMBYWARE LLC P.O. Box 5486 Salem OR
COINTRAX II USER MANUAL HAMBYWARE LLC P.O. Box 5486 Salem OR 97304 hamby@cyberis.net 2005 Hambyware LLC Page 1 UM102 Revision History Initial release v2.00 UM100 12/20/04 Correction section - All Metal
Building and evaluating network simulation systems
S-72.333 Postgraduate Course in Radiocommunications Fall 2000 Building and evaluating network simulation systems Shkumbin Hamiti Nokia Research Center shkumbin.hamiti@nokia.com HUT 06.02.2001 Page 1 (14)
Introduction to Blynk
Introduction to Blynk Lyfeshot's Blynk is an easy-to-use time-lapse camera. In this section, we will introduce the basics to get you up and running with your new Blynk as quickly as possible. Later sections
PULSE PIR Vers. IV with MFT
Operating Manual Control PULSE PIR Vers. IV with MFT Dear customer, these instructions apply in addition to the s Operating Manual. Observe in particular the safety instructions stated in the operating
Chapter Adding 1- T Mo he tio B n le to nde Yo r ur Inte Scerfac ne e Landscape Scene Stormy Night.mp4 End 200 Default Animation frame 1 Location
1- The Blender Interface Adding Motion to Your Scene Open your Landscape Scene file and go to your scene buttons. It s time to animate our dark and stormy night. We will start by making the correct setting
Use of the application program
Use of the application program Product family: Product type: Manufacturer: Output Binary Siemens Name: Switching Actuator N 53/ Order no.: 5WG 53-AB Name: Switching Actuator N 52/ Order no.: 5WG 52-AB
Introduction: Tech Report Frameless Antialiasing Ellen J. Scher Zagier Page #1
Introduction: Despite the significant advances in real-time computer graphics performance via improvements in hardware and software algorithmic design, there are, and will continue to be data sets expanding
Gait Analysis with ProAnalyst
Date Last Modified: March 25, 2010 Abstract This tutorial demonstrates how ProAnalyst can be used to measure the performance of a runner s gait. The runner s motion is analyzed and the points plotted.
How to Use Passive Infrared Sensor Cameras
ACTi Knowledge Base Category: Application Note Sub-category: Hardware, Application Model: ACM-4201, ACM-4001, TCM-4201, TCM-4001 Firmware: N/A Software: N/A Author: Ando Meritee Published: 2010/08/23 Reviewed:
An Epic Laser Battle
FLOWSTONE.qxd 2/14/2011 3:52 PM Page 20 by the staff of Robot An Epic Laser Battle BETWEEN ROBOTS Behind the Scenes! How we created vision-based programming using FlowStone Last month we introduced FlowStone,
Let s start with occluding contours (or interior and exterior silhouettes), and look at image-space algorithms. A very simple technique is to render
1 There are two major classes of algorithms for extracting most kinds of lines from 3D meshes. First, there are image-space algorithms that render something (such as a depth map or cosine-shaded model),
Pronto2K/ProntoHD I/O Tool User Guide (Version 1.0) Workstation Software. Home/Start. Pronto2K/ ProntoHD. I/O Tool. User Guide
Pronto2K/ProntoHD I/O Tool User Guide (Version 1.0) Workstation Software Home/Start Pronto2K/ ProntoHD I/O Tool User Guide Pronto2K/ProntoHD I/O Tool User Guide Introduction Basics Administrating Clips
Energy Conservation of Sensor Nodes using LMS based Prediction Model
Energy Conservation of Sensor odes using LMS based Prediction Model Anagha Rajput 1, Vinoth Babu 2 1, 2 VIT University, Tamilnadu Abstract: Energy conservation is one of the most concentrated research
For the last several NAB shows we ve talked about 4K resolution. Last year, we started
SEGMENT: Multiplatform Audio Tour Stop 3 COMPANY NAME: Sony CATEGORY: High Impact Formats HALL: Central Hall (Back ) BOOTH NUMBER: C11001 For the last several NAB shows we ve talked about 4K resolution.
Sygonix Home Starter Kit
App Instruction Manual Sygonix Home Starter Kit Item No. 1597114 www.conradconnect.de Contents Conrad Connect... 4 Symbols... 4 Core functions... 5 App to device communication... 6 App Installation...
BB-HCM371A / BB-HCM381A
Network Camera Model No. BB-HCM311A / BB-HCM331A BB-HCM371A / BB-HCM381A Additional Feature table The following features are added to the camera. Read both Operating Instructions manuals before starting
Gaze Tracking. Introduction :
Introduction : Gaze Tracking In 1879 in Paris, Louis Émile Javal observed that reading does not involve a smooth sweeping of the eyes along the text, as previously assumed, but a series of short stops
Module 2 Test Study Guide. Type of Transformation (translation, reflection, rotation, or none-of-theabove). Be as specific as possible.
Module 2 Test Study Guide CONCEPTS TO KNOW: Transformation (types) Rigid v. Non-Rigid Motion Coordinate Notation Vector Terminology Pre-Image v. Image Vertex Prime Notation Equation of a Line Lines of
TABLE OF CONTENTS. Page 2 35
TABLE OF CONTENTS INTRODUCTION... 3 WARNING SIGNS AND THEIR MEANINGS... 3 1. ABOUT THE PULSE ROBOT... 4 1.1. The hardware and software... 4 1.2. The operating states of the PULSE robot... 5 1.3. Safe operation
3D Computer Vision. Depth Cameras. Prof. Didier Stricker. Oliver Wasenmüller
3D Computer Vision Depth Cameras Prof. Didier Stricker Oliver Wasenmüller Kaiserlautern University http://ags.cs.uni-kl.de/ DFKI Deutsches Forschungszentrum für Künstliche Intelligenz http://av.dfki.de
Real Time Cloth Simulation
Real Time Cloth Simulation Sebastian Olsson (81-04-20) Mattias Stridsman (78-04-13) Linköpings Universitet Norrköping 2004-05-31 Table of contents Introduction...3 Spring Systems...3 Theory...3 Implementation...4
Robotics. Chapter 25-b. Chapter 25-b 1
Robotics Chapter 25-b Chapter 25-b 1 Particle Filtering Particle filtering uses a population of particles (each particle is a state estimate) to localize a robot s position. This is called Monte Carlo
UNIT 2-Data Communication Concept
UNIT 2-Data Communication Concept 2. a) Define: i) Non-return to zero codes 2015 June ii) RZ Codes b) List out the difference between serial and parallel transmission. c) What are the advantages of Asynchronous
How many controllers can I manage on a single AirLink network? One or more site controllers can manage up to 1,000 devices per AirLink system.
AirLink Frequently Asked Questions Commissioning How many controllers can I manage on a single AirLink network? One or more site controllers can manage up to 1,000 devices per AirLink system. What is the
Computer Graphics. Si Lu. Fall uter_graphics.htm 11/27/2017
Computer Graphics Si Lu Fall 2017 http://web.cecs.pdx.edu/~lusi/cs447/cs447_547_comp uter_graphics.htm 11/27/2017 Last time o Ray tracing 2 Today o Animation o Final Exam: 14:00-15:30, Novermber 29, 2017
Illumination and Geometry Techniques. Karljohan Lundin Palmerius
Illumination and Geometry Techniques Karljohan Lundin Palmerius Objectives Complex geometries Translucency Huge areas Really nice graphics! Shadows Graceful degradation Acceleration Optimization Straightforward
Network Working Group Request for Comments: 1046 ISI February A Queuing Algorithm to Provide Type-of-Service for IP Links
Network Working Group Request for Comments: 1046 W. Prue J. Postel ISI February 1988 A Queuing Algorithm to Provide Type-of-Service for IP Links Status of this Memo This memo is intended to explore how
Carrara Enhanced Remote Control (ERC)
Carrara Enhanced Remote Control (ERC) The Enhanced Remote Control suite is a set of behavior modifiers and scene commands that work together to add much needed functionality and control to your animation
Two-Stage Static/Dynamic Environment Modeling Using Voxel Representation
Robot 2015 - Second Iberian Conference on Robotics Autonomous Driving and Driver Assistance Systems Special Session Two-Stage Static/Dynamic Environment Modeling Using Voxel Representation Alireza Asvadi,
Image Mosaicing with Motion Segmentation from Video
Image Mosaicing with Motion Segmentation from Video Augusto Román and Taly Gilat EE392J Digital Video Processing Winter 2002 Introduction: Many digital cameras these days include the capability to record
So You Want To Throw A Party? How to create ticket links in NeonCRM for CSPC Events
So You Want To Throw A Party? How to create ticket links in NeonCRM for CSPC Events Background: We use our Neon CRM software to create ticket links for our events Using NeonCRM to create our ticket links
Open Addressing: Linear Probing (cont.)
Open Addressing: Linear Probing (cont.) Cons of Linear Probing () more complex insert, find, remove methods () primary clustering phenomenon items tend to cluster together in the bucket array, as clustering
ATE QUICK START GUIDE. KEPCO An ISO 9001 Company. VOLTAGE/CURRENT STABILIZED POWER SUPPLY I INTRODUCTION
QUICK START GUIDE KEPCO An ISO 9001 Company. ATE VOLTAGE/CURRENT STABILIZED POWER SUPPLY I INTRODUCTION 1.1. SCOPE OF MANUAL. This Quick Start Guide covers simple installation and local operation of the
CS 395 Fall 2000 Behavior-Based Robotics Pracitce Quiz 1
CS 395 Fall 2000 Behavior-Based Robotics Pracitce Quiz 1 This is longer than a real quiz would be. Question 1 (30 points) You have a robot equipped with a heat-sensing camera that can track people. You
SB012-HA Unity - Removing and Installing a New SD Card
301 Fulling Mill Road, Suite G I Application/Purpose This guide will help an installer and/or end user to remove and install a new SD card on the HA6001 Unity Integration Module It is important to remember
HyperBlade Wireless Saber Sound Software Scimitar Operating Instructions w/ Bluetooth Sound Modules Hyperdyne Labs 2006
HyperBlade Wireless Saber Sound Software Scimitar Operating Instructions w/ Bluetooth Sound Modules Hyperdyne Labs 2006 INTRODUCTION The wireless saber sound kit allows you to add motion-interactive sound
Technical White Paper. Behaviometrics. Measuring FAR/FRR/EER in Continuous Authentication
Technical White Paper Behaviometrics Measuring FAR/FRR/EER in Continuous Authentication Draft version 12/22/2009 Table of Contents Background... 1 Calculating FAR/FRR/EER in the field of Biometrics...
Dimensions. Model Number. Electrical connection emitter. Features. Electrical connection receiver. Product information. Pinout OBE12M-R100-S2EP-IO-V31
OBEM-R00-SEP-IO-V Dimensions. 8.7. 7..9. M (x).. ø... 0 9.9 7. 7. Release date: 08-06-08 :0 Date of issue: 08-06-08 80998_eng.xml Model Number OBEM-R00-SEP-IO-V Thru-beam sensor with -pin, M8 x connector
USER MANUAL. C200 Car Dash Camera
USER MANUAL C200 Car Dash Camera JOIN THE AKASO MOVEMENT How to Insert Micro SD Card? How to Format SD card? How to Operate While Recording? CONTENTS Packing List Camera Overview Buttons Introduction Charging
testo Sound Level Meter Instruction Manual
testo 816-1 Sound Level Meter Instruction Manual 2 1 Contents 1 Contents 1 Contents...3 2 Safety and the environment...5 2.1. About this document...5 2.2. Safety...5 2.3. Protecting the environment...6
Enter your password and click the login.
To access the courses you need vote on, start at itransfer.org. Find the imanage link at the bottom of the page. It will be on the right hand side in the dark gray area at the bottom of the page. Click
B.H.GARDI COLLEGE OF MASTER OF COMPUTER APPLICATION
Introduction :- An exploits the hardware resources of one or more processors to provide a set of services to system users. The OS also manages secondary memory and I/O devices on behalf of its users. So
AS AUTOMAATIO- JA SYSTEEMITEKNIIKAN PROJEKTITYÖT CEILBOT FINAL REPORT
AS-0.3200 AUTOMAATIO- JA SYSTEEMITEKNIIKAN PROJEKTITYÖT CEILBOT FINAL REPORT Jaakko Hirvelä GENERAL The goal of the Ceilbot-project is to design a fully autonomous service robot moving in a roof instead
In order to use Redborne Remote Services you must have at least the minimum specification:-
Redborne Upper School Redborne Remote Services Rev 1.3 October 2011 Redborne Remote Services can be located at www.redborne.com Contents 1 Introduction 2 Setting Up 3 Logging In 4 Opening Applications
6.01, Fall Semester, 2007 Assignment 6, Issued: Tuesday, Oct. 9 1
6.01, Fall Semester, 2007 Assignment 6, Issued: Tuesday, Oct. 9 1 MASSACHVSETTS INSTITVTE OF TECHNOLOGY Department of Electrical Engineering and Computer Science 6.01 Introduction to EECS I Fall Semester,
Lecture 14: Refraction
Lecture 14: Refraction We know from experience that there are several transparent substances through which light can travel air, water, and glass are three examples When light passes from one such medium
Chapter 24 Congestion Control and Quality of Service 24.1
Chapter 24 Congestion Control and Quality of Service 24.1 Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display. 24-1 DATA TRAFFIC The main focus of congestion control
CourseWorks Syllabus Guide for Instructors
CourseWorks Syllabus Guide for Instructors Note: In order to setup your CourseWorks syllabus, the Syllabus section has to be enabled in your course site. See the CourseWorks Settings Guide to learn how
Model Based Impact Location Estimation Using Machine Learning Techniques
Model Based Impact Location Estimation Using Machine Learning Techniques 1. Introduction Impacts on composite structures result in invisible damages that need to be detected and corrected before they lead
Introduction to Displacement, Velocity and Acceleration
Purpose We will use computer simulation to become more familiar with the concepts of displacement, velocity and acceleration. Introduction We will study x-t, v-t, and a-t graphs in this lab. In particular,
Chapter 2: Frequency Distributions
Chapter 2: Frequency Distributions Chapter Outline 2.1 Introduction to Frequency Distributions 2.2 Frequency Distribution Tables Obtaining ΣX from a Frequency Distribution Table Proportions and Percentages
QUICK GUIDE: HOW TO CREATE MEDIA FILES FOR THE ESPRECIOUS
QUICK GUIDE: HOW TO CREATE MEDIA FILES FOR THE ESPRECIOUS This quick guide explains you in a few steps how you can create media files for the Esprecious. Appendix 1 shows how you can import the media files
Graph Matching. walk back and forth in front of Motion Detector
Graph Matching Experiment 1 One of the most effective methods of describing motion is to plot graphs of distance, velocity, and acceleration vs. time. From such a graphical representation, it is possible
Shoe Box or Small/Medium Cereal Box Construction Paper Masking Tape
Name: Slow Marble Project Materials: Shoe Box or Small/Medium Cereal Box Construction Paper Masking Tape Objective: You will create a marble track given specific materials. A marble will enter the box
Chapter 7 - Light, Materials, Appearance
Chapter 7 - Light, Materials, Appearance Types of light in nature and in CG Shadows Using lights in CG Illumination models Textures and maps Procedural surface descriptions Literature: E. Angel/D. Shreiner,
CS162 Operating Systems and Systems Programming Lecture 11 Page Allocation and Replacement"
CS162 Operating Systems and Systems Programming Lecture 11 Page Allocation and Replacement" October 3, 2012 Ion Stoica http://inst.eecs.berkeley.edu/~cs162 Lecture 9 Followup: Inverted Page Table" With
Advanced Encoding Features of the Sencore TXS Transcoder
Advanced Encoding Features of the Sencore TXS Transcoder White Paper November 2011 Page 1 (11) www.sencore.com 1.605.978.4600 Revision 1.0 Document Revision History Date Version Description Author 11/7/2011
Soft Shadow Maps. Soft Shadow Maps for Linear Lights
Soft Shadow Maps for Linear Lights (with Stefan Brabec, Hans-Peter Seidel, MPI Informatik) Overview Motivation Soft Shadow Maps Hardware Implementation Sampling the Light Source Results Conclusion 1 Motivation
Press the key to change the TV sysetem in the following seguence: PAL AUTO NTSC
DVD Player for TXA-910DVD 1. Function explanation Keys Explanation Panel Remote When this key is pressed during stop, play will start. When this key is pressed during CD or DVD is playing. PLAY/PAUSE then
Prepare a stem-and-leaf graph for the following data. In your final display, you should arrange the leaves for each stem in increasing order.
Chapter 2 2.1 Descriptive Statistics A stem-and-leaf graph, also called a stemplot, allows for a nice overview of quantitative data without losing information on individual observations. It can be a good
Application description
Manufacturer Berker Motion detector Application description KNX motion detector module comfort 1.10m KNX motion detector module comfort 2.20m ETS KNX motion detector module comfort 1.10m ETS KNX motion
#1593: The top 10 things that can go wrong with an IBM Traveler Server
#1593: The top 10 things that can go wrong with an IBM Traveler Server plus how to detect and correct them Alan Forbes Acknowledgements and Disclaimer. Copyright IBM Corporation 2016. All rights reserved.
Operating instructions
Operating instructions DALI BASIC lighting control system Type: DALI RC BASIC SO 24.05.2001 / V1.0 OSRAM GmbH Hellabrunner Str. 1 D 81536 Munich Tel.: +49 89 6213 0 Fax: +49 89 6213 2020 Customer Service
How to: Objectively Scoring Your Video
How to: Objectively Scoring Your Video Video Clarity, Inc. Version 2.0 A Video Clarity Application Note page 1 of 9 ClearView has the ability objective score the video quality, graph the result, and show
10. Animation Triggers and Event Handlers
10. Animation Triggers and Event Handlers 10.1 Knightfall Step 14 - Introduction to Event Handlers Watch the video tutorial: IGA Lesson 09 Step 01 Once you are satisfied that your environment is exported
Dynamic Guaranteed Bit Rate
This chapter describes the following topics: Feature Summary and Revision History, page 1 Feature Description, page 2 How It Works, page 2 Limitations and Restrictions, page 3 Configuring Dedicated GBR
(Refer Slide Time: 00:01:27 min)
Computer Aided Design Prof. Dr. Anoop Chawla Department of Mechanical engineering Indian Institute of Technology, Delhi Lecture No. # 01 An Introduction to CAD Today we are basically going to introduce
Investigation: How is motion recorded?
Investigation: How is motion recorded? Introduction In this investigation you are going to discover a way to record your movement and find different ways to represent this recording with a graph. You will
After the Attack. Business Continuity. Planning and Testing Steps. Disaster Recovery. Business Impact Analysis (BIA) Succession Planning
After the Attack Business Continuity Week 6 Part 2 Staying in Business Disaster Recovery Planning and Testing Steps Business continuity is a organization s ability to maintain operations after a disruptive
Cs : Computer Vision Final Project Report
Cs 600.461: Computer Vision Final Project Report Giancarlo Troni gtroni@jhu.edu Raphael Sznitman sznitman@jhu.edu Abstract Given a Youtube video of a busy street intersection, our task is to detect, track,
Basic Polarization Techniques and Devices 1998, 2003 Meadowlark Optics, Inc
Basic Polarization Techniques and Devices 1998, 2003 Meadowlark Optics, Inc This application note briefly describes polarized light, retardation and a few of the tools used to manipulate the polarization
OV1001 Part No OV1001 HEIGHT ADJUSTABLE TABLE USER GUIDE
OV1001 Part No. 23620 OV1001 HEIGHT ADJUSTABLE TABLE USER GUIDE PRODUCT OVERVIEW User Guide: OV1001 OV1001 HEIGHT ADJUSTABLE TABLE A healthier work environment starts with the option to sit or stand throughout