Dimensions. Model Number. Electrical connection emitter. Features. Electrical connection receiver. Product information. Pinout OBE12M-R100-S2EP-IO-V31

Transcription

1 OBEM-R00-SEP-IO-V Dimensions M (x).. ø Release date: :0 Date of issue: _eng.xml Model Number OBEM-R00-SEP-IO-V Thru-beam sensor with -pin, M8 x connector Features Miniature design with versatile mounting options IO-link interface for service and process data Various frequencies for avoiding mutual interference (cross-talk immunity) Extended temperature range -0 C C High degree of protection IP69K Product information The R00 series miniature optical sensors are the first devices of their kind to offer an end-to-end solution in a small single standard design from thru-beam sensor through to a distance measurement device. As a result of this design, the sensors are able to perform practically all standard automation tasks. The entire series enables sensors to communicate via IO-Link. The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor. The use of Multi Pixel Technology gives the standard sensors a high level of flexibility and enables them to adapt more effectively to their operating environment. Electrical connection emitter Electrical connection receiver Pinout BN WH BU BK L+ n.c. C/Q L- L+ C/Q Q L- Wire colors in accordance with EN (brown) (white) (blue) (black) USA: Germany: Singapore:

2 OBEM-R00-SEP-IO-V Indicators/operating means Operating indicator Light-on/Dark-on changeover switch Sensitivity adjuster Operating indicator / dark on Signal indicator Operating indicator / light on Accessories IO-Link-Master0-USB IO-Link master, supply via USB port or separate power supply, LED indicators, M plug for sensor connection OMH-R0X-0 OMH-R0X-0 OMH-R0X-0 OMH-R0X-0 OMH-ML00-0 Mounting aid for round steel ø mm or sheet. mm... mm OMH-ML00-0 Mounting aid for round steel ø 0... mm or sheet mm... mm V-GM-M-PUR Female cordset, M8, -pin, PUR cable V-WM-M-PUR Female cordset, M8, -pin, PUR cable Other suitable accessories can be found at Release date: :0 Date of issue: _eng.xml USA: Germany: Singapore:

3 OBEM-R00-SEP-IO-V Release date: :0 Date of issue: _eng.xml Technical data System components OBEM-R00-S-IO-V OBEM-R00-EP-IO-V General specifications Effective detection range 0... m Threshold detection range m Light source LED Light type modulated visible red light LED risk group labelling exempt group Diameter of the light spot approx. 6 mm at a distance of m Angle of divergence.7 Ambient light limit EN : 0000 Lux Functional safety related parameters MTTF d 6 a Mission Time (T M ) 0 a Diagnostic Coverage (DC) 0 % Indicators/operating means Operation indicator Function indicator Control elements Control elements Parameterization indicator LED green: constantly on - power on flashing (Hz) - short circuit flashing with short break ( Hz) - IO-Link mode Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing ( Hz) - operating reserve not reached : light/dark switch : sensitivity adjustment IO link communication: green LED goes out briefly ( Hz) Electrical specifications Operating voltage U B V DC Ripple max. 0 % No-load supply current I 0 : ma : ma at V supply voltage Protection class III Interface Interface type IO-Link ( via C/Q = pin ) Transfer rate COM (8. kbaud) IO-Link Revision. Min. cycle time. ms Process data witdh : Process data output: Bit : Process data input: Bit Process data output: Bit SIO mode support yes Device ID : 0x00 (7) : 0x00 (88) Compatible master port type A Input Test input emitter deactivation at +U B Output Switching type Signal output Switching voltage Switching current Usage category Voltage drop U d. V DC Switching frequency f 000 Hz Response time 0. ms Conformity Communication interface IEC 6-9 Product standard EN Ambient conditions Ambient temperature C ( F) Storage temperature Mechanical specifications Housing width Housing height Housing depth The switching type of the sensor is adjustable. The default setting is: C/Q - Pin: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin: NPN normally closed / light-on, PNP normally open / dark-on push-pull ( in )outputs, short-circuit protected, reverse polarity protected, overvoltage protected max. 0 V DC max. 00 ma, resistive load DC- and DC C ( F) mm 6 mm. mm USA: Germany: Singapore:

4 Y Thru-beam sensor OBEM-R00-SEP-IO-V Degree of protection Connection Material Housing Optical face Mass IP67 / IP69 / IP69K M8 x connector, -pin PC (Polycarbonate) PMMA : approx. 0 g receiver: approx. 0 g Approvals and certificates UL approval E8706, culus Listed, class power supply, type rating Curves/Diagrams Characteristic response curve Offset Y [mm] X Distance X [m] Relative received light strength Stability control Distance X [m] X Functions and Operation R00 L D - Light-on / dark-on changeover switch - Sensing range / sensitivity adjuster - Operating indicator / dark on - Signal indicator - Operating indicator / light on To unlock the adjustment functions turn the sensing range /sensitivity adjuster for more than 80 degrees. Sensing Range / Sensitivity Turn sensing range / sensitivity adjuster clockwise to increase sensing range / sensitivity. Turn sensing range / sensitivity adjuster counter clockwise to decrease sensing range / sensitivity. If the end of the adjustment range is reached, the signal indicator starts flashing with 8 Hz. Light-on / Dark-on Configuration Press the light-on / dark-on changeover switch for more than second (less than seconds). The light-on / dark-on mode changes and the operating indicators are activated accordingly. If you press the light-on / dark-on changeover switch for more than seconds, the light-on /dark-on mode changes back to the original setting. On release of the light-on / dark-on changeover switch the current state is activated. Restore Factory Settings Press the light-on / dark-on changeover switch for more than 0 seconds (less than 0 seconds) until all LEDs turn off. On release of the light-on / dark-on changeover switch the signal indicator turns on. After seconds the sensor resumes operation with factory default settings. Release date: :0 Date of issue: _eng.xml USA: Germany: Singapore:

5 OBEM-R00-SEP-IO-V After minutes of inactivity the sensing range / sensitivity adjustment is locked. In order to reactivate the sensing range / sensitivity adjustment, turn the sensing range /sensitivity adjuster for more than 80 degrees. Release date: :0 Date of issue: _eng.xml USA: Germany: Singapore: