SITRANS LUT400 Parameter Configuration Charts
|
|
|
- Tamsin Gallagher
- 6 years ago
- Views:
Transcription
1 APPLICATION GUIDE SITRANS LUT400 Parameter Configuration Charts AG Objective: Print chart and use to record parameter values collected, prior to configuring device via Quick Start Wizards. Equipment: Siemens SITRANS LUT400 (for configuration once parameter values have been recorded) While every effort was made to verify the following information, no warranty of accuracy or usability is expressed or implied. Overview This document provides a Parameter Configuration Chart for each application type supported by SITRANS LUT400: Level - page 2 Volume (standard vessel) - page 3 Volume (linearization) - page 5 Flow - page 9 Use the appropriate chart for your specific application. Create a record of device parameter values to have on hand prior to completing Quick Start Wizards during commissioning of the device. (For more details see SITRANS LUT400 Operating Instructions, available on the product page of our website at Siemens Canada Limited Siemens Milltronics Process Instruments 1954 Technology Drive, P.O. Box 4225, Peterborough, ON Canada K9J 7B1 Tel: (705) Fax: (705)
2 Wizard - Quick Start (Level) Level application (1 page) APPLICATION GUIDE Device TAG: Serial Number: Application Type: Level or Space or Distance QS Step Parameter Options (default noted by asterisk) Identification TAG Long TAG Descriptor Message Installation Date Language English* Deutsch Francais Espanol Application Transducer No Transducer* XRS-5 XPS-10 XPS-15 XCT-8 XCT-12 XPS-30 XPS-40 XLT-30 XLT-60 STH Operation (Application Type) Level* Space Distance Temperature Source Transducer* External TS-3 Average of Transducer and TS-3 (if Temperature Source = Fixed) Ranges Units m* cm mm ft in High Calibration Point Low Calibration Point Response Rate Slow (0.1 m/min)* Medium (1.0 m/min) Fast (10.0 m/min) Level application - Parameter Configuration Chart page 1 of 1 SITRANS LUT400 Parameter Configuration Charts AG of 12
3 Wizard - Quick Start (Volume) Application Type: Volume Volume (standard vessel) application (2 pages) APPLICATION GUIDE Device TAG: Serial Number: QS Step Parameter Options (default noted by asterisk) Identification TAG Long TAG Descriptor Message Installation Date Language English* Deutsch Francais Espanol Application Transducer No Transducer* XRS-5 XPS-10 XPS-15 XCT-8 XCT-12 XPS-30 XPS-40 XLT-30 XLT-60 STH Temperature Source Transducer* External TS-3 Average of Transducer and TS-3 (if Temperature Source = Fixed) Vessel Shape Vessel Shape Linear* Cylinder Parabolic Bottom Half Sphere Bottom Flat Sloped Bottom Parabola Ends Sphere Conical Bottom Volume (standard vessel) application - Parameter Configuration Chart page 1 of 2 SITRANS LUT400 Parameter Configuration Charts AG of 12
4 APPLICATION GUIDE Continued from previous page Ranges Units m* cm mm ft in High Calibration Point Low Calibration Point Response Rate Slow (0.1 m/min)* Medium (1.0 m/min) Fast (10.0 m/min) Volume Units USgal* l Impgal cum Maximum Volume Vessel Dimension A (for some vessel shapes) Vessel Dimension L (for some vessel shapes) Volume (standard vessel) application - Parameter Configuration Chart page 2 of 2 SITRANS LUT400 Parameter Configuration Charts AG of 12
5 Volume (linearization) application (3 pages) APPLICATION GUIDE Device TAG: Serial Number: Wizard - Quick Start (Volume - Linearization) Application Type: Volume QS Step Parameter Options (default noted by asterisk) Identification TAG Long TAG Descriptor Message Installation Date Language English* Deutsch Francais Espanol Application Transducer No Transducer* XRS-5 XPS-10 XPS-15 XCT-8 XCT-12 XPS-30 XPS-40 XLT-30 XLT-60 STH Temperature Source Transducer* External TS-3 Average of Transducer and TS-3 (if Temperature Source = Fixed) Vessel Shape Vessel Shape Linearization Table* Curve Table Volume (linearization) application - Parameter Configuration Chart page 1 of 3 SITRANS LUT400 Parameter Configuration Charts AG of 12
6 APPLICATION GUIDE Continued from previous page Ranges Units m* cm mm ft in High Calibration Point Low Calibration Point Response Rate Slow (0.1 m/min)* Medium (1.0 m/min) Fast (10.0 m/min) Volume Units USgal* l Impgal cum Maximum Volume Volume (linearization) application - Parameter Configuration Chart page 2 of 3 SITRANS LUT400 Parameter Configuration Charts AG of 12
7 APPLICATION GUIDE Continued from previous page Ranges cont d Linearization > Breakpoints 1-8 a) Level (1) Level (2) Level (3) Level (4) Level (5) Level (6) Level (7) Level (8) > Breakpoints 9-16 a) Level (9) Level (10) Level (11) Level (12) Level (13) Level (14) Level (15) Level (16) > Breakpoints a) Level (17) Level (18) Level (19) Level (20) Level (21) Level (22) Level (23) Level (24) > Breakpoints a) Level (25) Level (26) Level (27) Level (28) Level (29) Level (30) Level (31) Level (32) Units m* cm mm ft in Volume Units USgal* l Impgal cum Volume (1) Volume (2) Volume (3) Volume (4) Volume (5) Volume (6) Volume (7) Volume (8) Volume (9) Volume (10) Volume (11) Volume (12) Volume (13) Volume (14) Volume (15) Volume (16) Volume (17) Volume (18) Volume (19) Volume (20) Volume (21) Volume (22) Volume (23) Volume (24) Volume (25) Volume (26) Volume (27) Volume (28) Volume (29) Volume (30) Volume (31) Volume (32) Volume (linearization) application - Parameter Configuration Chart page 3 of 3 a) Eight Level breakpoints and eight Volume breakpoints per Breakpoint table, for a total of 32 available breakpoints. SITRANS LUT400 Parameter Configuration Charts AG of 12
8 APPLICATION GUIDE SITRANS LUT400 Parameter Configuration Charts AG of 12
9 Quick Start Wizard (Flow) a) Flow application (4 pages) APPLICATION GUIDE Device TAG: Serial Number: Application Type: Flow QS Step Parameter Options (default noted by asterisk) Identification TAG Long TAG Descriptor Message Installation Date Language English* Deutsch Francais Espanol Application Transducer No Transducer* XRS-5 XPS-10 XPS-15 XCT-8 XCT-12 XPS-30 XPS-40 XLT-30 XLT-60 STH Temperature Source Transducer* External TS-3 Average of Transducer and TS-3 (if Temperature Source = Fixed) Flow application - Parameter Configuration Chart page 1 of 4 a ) The Quick Start Wizard for Flow will appear on the SITRANS LUT400 local display Wizard menu if the device has been factory configured for Pump and Flow, or OCM. SITRANS LUT400 Parameter Configuration Charts AG of 12
10 APPLICATION GUIDE Primary Device Shape Continued from previous page Primary Measuring Device (select one from list below): Off (default) * Exponential Devices Flow Exponent k Factor Rectangular Flume BS-3680 Approach Width B Throat Width b Hump Height p Throat Length L Round Nose Horizontal Crest Weir BS-3680 Crest Width b Crest Height p Crest Length L Trapezoidal Flume BS-3680 Slope Approach Width B Throat Width b Hump Height p Throat length L U-Flume BS-3680 Approach Diameter Da Throat Diameter D Hump Height p Throat length L Finite Crest Weir BS-3680 Crest Width b Crest Height p Crest Length L Thin Plate Rectangular Weir BS-3680 Approach Width B Crest Width b Crest Height p Thin Plate V-Notch Weir BS-3680 V-Notch Angle Rectangular Weir Contracted Crest Width b Round Pipe Roughness Coefficient Slope Pipe Inside Diameter D Palmer Bowlus Flume Maximum Flume Width hmax H-Flume Maximum Listed Head hmax Universal Head Flow Number of Data Points (4 to 16) Flow application - Parameter Configuration Chart page 2 of 4 SITRANS LUT400 Parameter Configuration Charts AG of 12
11 APPLICATION GUIDE Continued from previous page Ranges Units m* cm mm ft in High Calibration Point Low Calibration Point Response Rate Slow (0.1 m/min)* Medium (1.0 m/min) Fast (10.0 m/min) Method of Flow Calculation Absolute* Ratiometric Maximum Head Zero Head Offset Flowrate Units L/s* L/min Cum/h Cum/d Cuft/s Cuft/d Impgal/min Impgal/d gal/min gal/d Maximum Flow Flow Rate Decimal no digits* 1 digit 2 digits 3 digits Low Flow Cutoff Flow application - Parameter Configuration Chart page 3 of 4 SITRANS LUT400 Parameter Configuration Charts AG of 12
12 a. APPLICATION GUIDE Ranges (cont d) Linearization (for PMD = Universal Head Flow) Continued from previous page > Breakpoints 1-8 a) Head (1) Head (2) Head (3) Head (4) Head (5) Head (6) Head (7) Head (8) > Breakpoints 9-16 a) Head (9) Head (10) Head (11) Head (12) Head (13) Head (14) Head (15) Head (16) > Breakpoints a) Head (17) Head (18) Head (19) Head (20) Head (21) Head (22) Head (23) Head (24) > Breakpoints a) Head (25) Head (26) Head (27) Head (28) Head (29) Head (30) Head (31) Head (32) Units m* cm mm ft in Flowrate Units L/s* L/min Cum/h Cum/d Cuft/s Cuft/d Impgal/min Impgal/d gal/min gal/d Flow (1) Flow (2) Flow (3) Flow (4) Flow (5) Flow (6) Flow (7) Flow (8) Flow (9) Flow (10) Flow (11) Flow (12) Flow (13) Flow (14) Flow (15) Flow (16) Flow (17) Flow (18) Flow (19) Flow (20) Flow (21) Flow (22) Flow (23) Flow (24) Flow (25) Flow (26) Flow (27) Flow (28) Flow (29) Flow (30) Flow (31) Flow (32) Flow application - Parameter Configuration Chart page 4 of 4 a) Eight Head breakpoints and eight Flow breakpoints per Breakpoint table, for a total of 32 available breakpoints. SITRANS LUT400 Parameter Configuration Charts AG of 12
Configuring the MultiRanger 200 to measure open channel flow. Specific parameter setting to configure the following primary measurement devices:
Flow Application Configuration AG040305 Configuring the MultiRanger 200 to measure open channel flow Objective: Specific parameter setting to configure the following primary measurement devices: exponential
Siemens SITRANS LUT400 revision 1
HART Field Device Specification: Siemens SITRANS LUT400 revision 1 Siemens Canada Ltd. 1954 Technology Drive Peterborough, Ontario, Canada K9J 7B1 HART is a registered trademark of the HART Communication
For SITRANS LUT400 (HART) Manual 02/2014
For SITRANS LUT400 (HART) Manual 02/2014 Safety Guidelines: Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected equipment.
Setting up a custom instrument configuration template with EnviroRanger Configuration Tool (ECT) software
Instrument Configuration Software Reference AG030127 Setting up a custom instrument configuration template with EnviroRanger Configuration Tool (ECT) software Objective: Equipment: To develop a custom
Level Measurement Products Ultrasonic Level Products
Siemens Industry, Inc / IA / Process Instruments Level Measurement Products Ultrasonic Level Products Restricted Siemens Industry, Inc. 2015 All rights reserved. Answers for industry. SITRANS Probe LU
MINIRANGER PLUS. Instruction Manual PL-604 June Rev. 1.3
MINIRANGER PLUS Instruction Manual PL-604 June 2001 MA 33456040 Rev. 1.3 Safety Guidelines Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product
Modbus Register sc200 US Flow Module
Powered by TCPDF (www.tcpdf.org) Modbus Register sc200 US Flow Module V1.02 FLOW 40001 Float 2 R 0 /99999.99 The flow value VOLUME 40003 Float 2 R 0 /999999999 The volume value RANGE 40005 Float 2 R? The
Level and Flow Measurement. High Accuracy OCM. FlowCERT, DUET and Speedy
Level and Flow Measurement High Accuracy OCM FlowCERT, DUET and Speedy FlowCERT: High accuracy flow on weirs, flumes and area x velocity Pulsar s FlowCERT system gives you everything you need for the industry's
Unit 7: 3D Figures 10.1 & D formulas & Area of Regular Polygon
Unit 7: 3D Figures 10.1 & 10.2 2D formulas & Area of Regular Polygon NAME Name the polygon with the given number of sides: 3-sided: 4-sided: 5-sided: 6-sided: 7-sided: 8-sided: 9-sided: 10-sided: Find
Installation and Operating Instructions
A Leader in Level Measurement For Assistance Call 1-800-527-6297 Outside North America + 215-674-1234 Installation and Operating Instructions USonic-R Series 2-Channel Continuous Remote Ultrasonic Level
Level instruments. Continuous level measurement - Ultrasonic controllers SITRANS LUC500. 5/146 Siemens FI
SITRANS LUC00 Siemens AG 009 Overview SITRANS LUC00 is a complete ultrasonic level controller for monitoring and control of water distribution and wastewater collection systems, with energy-saving algorithms.
Instruction Manual March airanger XPL PLUS
Instruction Manual March 2005 airanger XPL PLUS Safety Guidelines: Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected equipment.
Installation and Operating Instructions
A Leader in Level Measurement For Assistance Call 1-800-527-6297 Outside North America + 215-674-1234 Installation and Operating Instructions USonic Series Continuous Ultrasonic Level Transmitter using
S8.6 Volume. Section 1. Surface area of cuboids: Q1. Work out the surface area of each cuboid shown below:
Things to Learn (Key words, Notation & Formulae) Complete from your notes Radius- Diameter- Surface Area- Volume- Capacity- Prism- Cross-section- Surface area of a prism- Surface area of a cylinder- Volume
Continuous level measurement Ultrasonic controllers
Siemens AG 0 Overview is a complete ultrasonic level controller for monitoring and control of water distribution and wastewater collection systems, with energy-saving algorithms. Benefits Monitoring and
Level and Flow Measurement. Ultra Range. Ultra 3, Ultra 5 and UltraTwin
Level and Flow Measurement Ultra Range Ultra 3, Ultra 5 and UltraTwin Ultra Range Ultra 3 Ultra sophistication in a smart package, Ultra 3 combines reliable non-contacting ultrasonic level and volume measurement,
ENVIRORANGER ERS 500 NVIRORANGER ERS 500 USER GUIDE. Instruction Manual PL-600 January Rev. 1.2
ENVIRORANGER ERS 500 USER GUIDE Instruction Manual PL-600 January 2001 33456000 Rev. 1.2 NVIRORANGER ERS 500 Safety Guidelines Warning notices must be observed to ensure personal safety as well as that
Name: Target 12.2: Find and apply surface of Spheres and Composites 12.2a: Surface Area of Spheres 12.2b: Surface Area of Composites Solids
Unit 12: Surface Area and Volume of Solids Target 12.0: Euler s Formula and Introduction to Solids Target 12.1: Find and apply surface area of solids 12.1a: Surface Area of Prisms and Cylinders 12.1b:
Faculty of Engineering. Irrigation & Hydraulics Department Excel Tutorial (1)
Problem Statement: Excel Tutorial (1) Create an Excel spread sheet that can calculate the flow area A, wetted perimeter P, hydraulic radius R, top water surface width B, and hydraulic depth D for the following
Chapter 10 Practice Test
Chapter 10 Practice Test Multiple Choice Identify the choice that best completes the statement or answers the question. 1 What is the surface area of a sphere with radius 7 cm? A. 7 cm 2 B. 14 cm 2 C.
Math 370 Exam 5 Review Name
Math 370 Exam 5 Review Name Graph the ellipse and locate the foci. 1) x2 6 + y2 = 1 1) Objective: (9.1) Graph Ellipses Not Centered at the Origin Graph the ellipse. 2) (x + 2)2 + (y + 1)2 9 = 1 2) Objective:
Instruction Manual September sitrans LU 02
Instruction Manual September 2005 sitrans LU 02 Safety Guidelines: Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected equipment.
Ultrasonic Transmitters SITRANS LU150. Operating Instructions 03/2015 SITRANS
Ultrasonic Transmitters Operating Instructions 03/2015 SITRANS Safety Guidelines Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the
Siemens AG Continuous level measurement Ultrasonic controllers
Overview The Siemens controllers are compact, single point, long-range ultrasonic controllers for continuous level or volume measurement of liquids, slurries, and solids, and high accuracy monitoring of
Temperature Measurement SITRANS TS300
Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Dimensional drawings Cable gland M1x1.5 for cable Ø 3... 6.5 (0.1... 0.6) Ø 60 (.36) Ø d = N + H 1 Ø 50.5 (1.99) U X H 1 N H Ø
Volume of Cylinders. Volume of Cones. Example Find the volume of the cylinder. Round to the nearest tenth.
Volume of Cylinders As with prisms, the area of the base of a cylinder tells the number of cubic units in one layer. The height tells how many layers there are in the cylinder. The volume V of a cylinder
EDEXCEL NATIONAL CERTIFICATE UNIT 4 MATHEMATICS FOR TECHNICIANS OUTCOME 1
EDEXCEL NATIONAL CERTIFICATE UNIT 4 MATHEMATICS FOR TECHNICIANS OUTCOME 1 TUTORIAL 4 AREAS AND VOLUMES Determine the fundamental algebraic laws and apply algebraic manipulation techniques to the solution
II PUC CHAPTER 6 APPLICATION OF DERIVATIES Total marks 10
II PUC CHAPTER 6 APPLICATION OF DERIVATIES Total marks 10 1 mark 2 marks 3 marks 4 marks 5 marks 6 Marks TOTAL MARKS -- 1 1 -- 1 10 TWO MARK QUESTIONS 1. Find the approximate change in the volume V of
FM8000 Ultrasonic Open Channel Flow Meter
FM8000 Ultrasonic Open Channel Flow Meter October 2015 Page 2 FLOMOTION SYSTEMS Inc. Buffalo, NY 14228-2103 Tel:800-909-3569 (U.S. & Canada) or 716-691-3941 E-Mail: info@flomotionsystems.com TABLE OF CONTENTS
Instruction Manual December sitrans PROBE LU
Instruction Manual December 2004 sitrans PROBE LU Safety Guidelines: Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected equipment.
SITRANS LU 02. Instruction Manual January 2002
SITRANS LU 02 Instruction Manual January 2002 Safety Guidelines Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected equipment.
AiRanger DPL Plus. Dual-Point Ultrasonic Level Measurement System
AiRanger DPL Plus Dual-Point Ultrasonic Level Measurement System Part 1. General 1.1 Scope A. This section describes the requirements for an ultrasonic dual-point level scanner controller with transceiver
Skills Practice Skills Practice for Lesson 2.1
Skills Practice Skills Practice for Lesson.1 Name Date Backyard Barbecue Introduction to Volume and Surface Area Vocabulary Write the term from the box that best completes each statement. surface area
ANGLES 4/18/2017. Surveying Knowledge FE REVIEW COURSE SPRING /19/2017
FE REVIEW COURSE SPRING 2017 Surveying 4/19/2017 Surveying Knowledge 4 6 problems Angles, distances, & trigonometry Area computations Earthwork & volume computations Closure Coordinate systems State plane,
Connecting SIEMENS PROFIBUS PA Instrument to Non-Siemens Host via an IM157 DP/PA Link Model
IM157 Link Model on Non-S7 Masters Connecting SIEMENS PROFIBUS PA Instrument to Non-Siemens Host via an IM157 DP/PA Link Model Objective: Equipment: Learn how to connect a Siemens PROFIBUS PA device to
Practice Test Unit 8. Note: this page will not be available to you for the test. Memorize it!
Geometry Practice Test Unit 8 Name Period: Note: this page will not be available to you for the test. Memorize it! Trigonometric Functions (p. 53 of the Geometry Handbook, version 2.1) SOH CAH TOA sin
analytical bulk flow distance FLOW level pressure temperature industrial communication
analytical bulk flow distance FLOW level pressure temperature industrial communication LEVELWIZARD II OPEN CHANNEL FLOWMETER The LevelWizard II Open Channel Flowmeter is non-contacting and operates on
Free Response. Test A. 1. What is the estimated area of the figure?
Test A 1. What is the estimated area of the 6. An 8.5 in. by 11 in. sheet of paper is enlarged to make a poster by doubling its length and width. What is the new perimeter? 7. How does the area of a square
12/11/2018 Algebra II - Semester 1 Review
Name: Semester Review - Study Guide Score: 72 / 73 points (99%) Algebra II - Semester 1 Review Multiple Choice Identify the choice that best completes the statement or answers the question. Name the property
Attendance Questions: Find the area of each shape. Round your answer to the nearest tenth. 1. An equilateral triangle with edge length 20 cm.
Page 1 of 17 Attendance Questions: Find the area of each shape. Round your answer to the nearest tenth. 1. An equilateral triangle with edge length 20 cm. Page 1 of 17 Page 2 of 17 2. A regular hexagon
Measurement and Geometry: Area and Volume of Geometric Figures and Objects *
OpenStax-CNX module: m35023 1 Measurement and Geometry: and Volume of Geometric Figures and Objects * Wade Ellis Denny Burzynski This work is produced by OpenStax-CNX and licensed under the Creative Commons
#1 A: Surface Area of Triangular Prisms Calculate the surface area of the following triangular prisms. You must show ALL of your work.
#1 A: Surface Area of Triangular Prisms Calculate the surface area of the following triangular prisms. You must show ALL of your work. (a) (b) (c) (d) (e) #1 B: VOLUME of Triangular Prisms Calculate the
Use Math to Solve Problems and Communicate. Level 1 Level 2 Level 3 Level 4 Level 5 Level 6
Number Sense M.1.1 Connect and count number words and numerals from 0-999 to the quantities they represent. M.2.1 Connect and count number words and numerals from 0-1,000,000 to the quantities they represent.
MonoScan User's Manual
MonoScan User's Manual ii MonoScan User's Manual iv MonoScan User's Manual Important Notice This manual is delivered subject to the following conditions and restrictions: This manual contains proprietary
Engineering Specifications HydroRanger 200. Multi-Functional Level Control System
General Engineering Specifications HydroRanger 200 Multi-Functional Level Control System Scope This section describes the requirements for a multi-functional level controller system. Under this item, the
3-D Shapes and volume
3-D Shapes and Volume Question Paper 1 Level IGCSE Subject Maths Exam Board Edexcel Topic Shape, Space and Measures Sub Topic 3-D Shapes and volume Booklet Question Paper 1 Time Allowed: 57 minutes Score:
Communication. SmartLinx PROFIBUS DP-V1. Operating Instructions
Communication SmartLinx PROFIBUS DP-V1 Operating Instructions Edition 08/2015 Safety Guidelines: Warning notices must be observed to ensure personal safety as well as that of others, and to protect the
Quick Start Guide. Measuring & Control Equipment (MACE) P/L
Mace USA LLC PO Box 7144 Overland Park, KS 66207 United States of America Ph: 888 440 4215 Fax: 888 440 6999 Email: sales@maceusa.com www.maceusa.com Measuring & Control Equipment (MACE) P/L PO Box 911,
Level Measurement Continuous level measurement - Ultrasonic transducers
Overview transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing effect reduces blanking distance Optional foam
MPM 1D Learning Goals and Success Criteria ver1 Sept. 1, Learning Goal I will be able to: Success Criteria I can:
MPM 1D s and ver1 Sept. 1, 2015 Strand: Number Sense and Algebra (NA) By the end of this course, students will be able to: NA1 Demonstrate an understanding of the exponent rules of multiplication and division,
SITRANS LUT400 (HART) Operating Instructions 02/2014
SITRANS LUT400 (HART) Operating Instructions 02/2014 Safety Guidelines: Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected
Instruction Manual July sitrans RD SOFTWARE
Instruction Manual July 2007 sitrans RD SOFTWARE Safety Guidelines: Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected equipment.
P1 REVISION EXERCISE: 1
P1 REVISION EXERCISE: 1 1. Solve the simultaneous equations: x + y = x +y = 11. For what values of p does the equation px +4x +(p 3) = 0 have equal roots? 3. Solve the equation 3 x 1 =7. Give your answer
PITSCO Math Individualized Prescriptive Lessons (IPLs)
Orientation Integers 10-10 Orientation I 20-10 Speaking Math Define common math vocabulary. Explore the four basic operations and their solutions. Form equations and expressions. 20-20 Place Value Define
MATH-8 Review Volume of 3D shapes 2018 N Exam not valid for Paper Pencil Test Sessions
MATH-8 Review Volume of 3D shapes 2018 N Exam not valid for Paper Pencil Test Sessions [Exam ID:2YBSPT 1 What is the volume of a cube with a length of 8 inches? A 96 in 3 B 256 in 3 C 512 in 3 D 384 in
Determine the surface area of the following square-based pyramid. Determine the volume of the following triangular prism. ) + 9.
MPM 1D Name: Unit: Measurement Date: Calculating and of Three Dimensional Figures Use the Formula Sheet attached to help you to answer each of the following questions. Three problems are worked out for
Solid Figures. Name. 22 Topic 18. Reteaching Polyhedrons Prisms
Solid Figures Polyhedrons Prisms Pyramids Reteaching 8- Properties of polyhedrons include vertices, edges, and faces, and base(s). Square Pyramid K Reteaching 8- Not Polyhedrons Cylinder Cone Sphere H
Lesson 9. Three-Dimensional Geometry
Lesson 9 Three-Dimensional Geometry 1 Planes A plane is a flat surface (think tabletop) that extends forever in all directions. It is a two-dimensional figure. Three non-collinear points determine a plane.
FM8000 Ultrasonic Open Channel Flow Meter
FM8000 Ultrasonic Open Channel Flow Meter March 2014 2 TABLE OF CONTENTS 1. SYSTEM OVERVIEW...7 1. Receiving and Inspection of Product and Packaging...7 2. Safety and Operation...7 3. Warranty...7 2. SPECIFICATION...8
Geometry Workbook WALCH PUBLISHING
Geometry Workbook WALCH PUBLISHING Table of Contents To the Student..............................vii Unit 1: Lines and Triangles Activity 1 Dimensions............................. 1 Activity 2 Parallel
Level Measurement Continuous level measurement Ultrasonic controllers
Overview The Siemens controllers are compact, single point, long-range ultrasonic controllers for continuous level or volume measurement of liquids, slurries, and solids, and high accuracy monitoring of
SP about Rectangular Blocks
1 3D Measure Outcomes Recognise and draw the nets of prisms, cylinders, and cones. Solve problems about the surface area and volume of rectangular blocks, cylinders, right cones, prisms, spheres, and solids
Lesson 4: Volumes of Pyramids and Cones
: Volumes of Pyramids and Cones Learning Targets I can calculate the volumes of pyramids. I can apply the properties of right triangles and trigonometry to find the volume of pyramids Volumes of pyramids
Level Measurement Continuous level measurement - Ultrasonic controllers
SITRANS LUT00 series Overview The SITRANS LUT00 series controllers are compact, single point, long-range ultrasonic controllers for continuous level or volume measurement of liquids, slurries, solids,
Montana City School GRADE 5
Montana City School GRADE 5 Montana Standard 1: Students engage in the mathematical processes of problem solving and reasoning, estimation, communication, connections and applications, and using appropriate
Continuous level measurement Radar transmitters
Overview Configuration Mounting on a nozzle Min. clearance: 10 (0.4) Installation min. 1 000 (39) is a 2-wire 2 GHz pulse radar level transmitter for continuous monitoring of solids in storage vessels
Level Measurement Continuous level measurement - Ultrasonic controllers
SITRANS LUT00 series Overview The SITRANS LUT00 series controllers are compact, single point, long-range ultrasonic controllers for continuous level or volume measurement of liquids, slurries, solids,
Math 8: Identify Shapes and Surface Area
Name: Class: Date: Math 8: Identify Shapes and Surface Area 1. Name the solid according to its description: The figure has one base that is a rectangle and four lateral surfaces that are triangles. 2.
Area. Domain 4 Lesson 25. Getting the Idea
Domain 4 Lesson 5 Area Common Core Standard: 7.G.6 Getting the Idea The area of a figure is the number of square units inside the figure. Below are some formulas that can be used to find the areas of common
9. Volume NOTES.notebook January 19, 2017
Starter - NO Calculators ) Find 20% of 248 2) Find - 5 4 Today's Learning: ) Find the highest common factor of 4 and 49. To revise volume of cubes, cuboids and prisms. 4) Find 5% of 80. 5) Calculate 256
SURFACE ROUGHNESS TESTER TR100/110
SURFACE ROUGHNESS TESTER TR100/110 Pocket-size & economical price Large measuring range suitable for most materials Measures flat, outer cylinder and sloping surface Both Ra and Rz parameters in one instrument
3 Dimensional Geometry Chapter Questions. 1. What are the differences between prisms and pyramids? Cylinders and cones?
3 Dimensional Geometry Chapter Questions 1. What are the differences between prisms and pyramids? Cylinders and cones? 2. What is volume and how is it found? 3. How are the volumes of cylinders, cones
Geometry 10 and 11 Notes
Geometry 10 and 11 Notes Area and Volume Name Per Date 10.1 Area is the amount of space inside of a two dimensional object. When working with irregular shapes, we can find its area by breaking it up into
Conic Sections. College Algebra
Conic Sections College Algebra Conic Sections A conic section, or conic, is a shape resulting from intersecting a right circular cone with a plane. The angle at which the plane intersects the cone determines
Name: Date: Period: Chapter 9: 3-D Figures Topic 3: Volume Day 2
Name: Date: Period: Do Now: Chapter 9: 3-D Figures Topic 3: Volume Day 2 1.) A rectangular prism has a volume of 3x 2 + 18x + 24. Its base has a length of x + 2 and a width of 3. Which expression represents
Write Euler s Theorem. Solving Problems Using Surface Area and Volume. Figure Surface Area Volume. Cl V 5 1 } 3
CHAPTER SUMMARY Big Idea 1 BIG IDEAS Exploring Solids and Their Properties For Your Notebook Euler s Theorem is useful when finding the number of faces, edges, or vertices on a polyhedron, especially when
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Exploration Drive Aberdeen Science and Energy Park Aberdeen AB23 8HZ Contact: Mr Graham Robertson Tel: +44(0)1224 708500 Fax: +44(0)1224 772
Siemens AG Continuous level measurement - Radar transmitters. Configuration. Mounting on a nozzle. Installation min.
Overview Configuration Mounting on a nozzle Min. clearance: 10 (0.4) Installation min. 1 000 (39) is a 2-wire 2 GHz pulse radar level transmitter for continuous monitoring of solids in storage vessels
Name: Block Score /36 Version: A
Name: _ Block Score /36 Version: A Surface Area & Volume Matching Match the correct term to each of the following descriptions. A term may be used more than once or not at all. a. edge h. net b. face i.
SITRANS L Level instruments
Overview Technical specifications Mode of Operation Measuring principle Ultrasonic level measurement Measuring range 0.3 to 1 m (1 to 0 ft), transducer dependent Measuring points 1 or 2 Input Analog 0
Smarter Balanced Vocabulary (from the SBAC test/item specifications)
Example: Smarter Balanced Vocabulary (from the SBAC test/item specifications) Notes: Most terms area used in multiple grade levels. You should look at your grade level and all of the previous grade levels.
Moore Catholic High School Math Department
Moore Catholic High School Math Department Geometry Vocabulary The following is a list of terms and properties which are necessary for success in a Geometry class. You will be tested on these terms during
Quick Start Manual April English Dansk Deutsch. Español Français Italiano Nederlands Português Suomi Svenska. sitrans LG200
Quick Start Manual April 2009 Dansk Deutsch Español Français Italiano Nederlands Português Suomi Svenska sitrans LG200 SITRANS LG200 Quick Start Manual This manual outlines the essential features and
Ultrasonic Transmitters SITRANS LU150. Operating Instructions
Ultrasonic Transmitters Operating Instructions Edition 03/2016 Introduction 1 Description 2 Installing and mounting 3 Ultrasonic transmitters Operating Instructions Connecting 4 Commissioning 5 Operating
Vocabulary. Triangular pyramid Square pyramid Oblique square pyramid Pentagonal pyramid Hexagonal Pyramid
CP1 Math 2 Unit 8: S.A., Volume, Trigonometry: Day 7 Name Surface Area Objectives: Define important vocabulary for 3-dimensional figures Find the surface area for various prisms Generalize a formula for
Chapter - 13 (Surface areas and Volumes)
Chapter - 13 (Surface areas and Volumes) Key Concepts SN. Name Figure Lateral/curved surface area 1 Cuboid Total surface area TSA Volume (V) Symbols use for b = breadth 2. Cube 4s 2 6s 2 s 3 s = side 3.
MR. JIMENEZ FINAL EXAM REVIEW GEOMETRY 2011
PAGE 1 1. The area of a circle is 25.5 in. 2. Find the circumference of the circle. Round your answers to the nearest tenth. 2. The circumference of a circle is 13.1 in. Find the area of the circle. Round
Geometry Review Chapter 10: Volume PA Anchors: A3; B2; C1. 1. Name the geometric solid suggested by a frozen juice can.
Geometry Review Chapter 10: Volume PA Anchors: A; B2; C1 1. Name the geometric solid suggested by a frozen juice can. 2. Name the geometric solid suggested by a beach ball.. Name the geometric solid suggested
Polynomial and Rational Functions. Copyright Cengage Learning. All rights reserved.
2 Polynomial and Rational Functions Copyright Cengage Learning. All rights reserved. 2.1 Quadratic Functions Copyright Cengage Learning. All rights reserved. What You Should Learn Analyze graphs of quadratic
Installation and Operating Instructions
KROHNE, In c. For Assistance Call 1-800-356-9464 Installation and Operating Instructions OPTISOUND Series 2-Channel, Continuous, Remote Ultrasonic, Level Measurement System using: VU31 Series Electronics
Communication settings: Network configuration can be done via the Anybus IP configuration setup tool or via the on board Web server
SmartLinx EtherNet/IP instruction and use APPLICATION GUIDE Objective: Show the user how to configure and use an EtherNet/IP SmartLinx communication module. AG082415 While every effort was made to verify
Network configuration can be done via the Anybus IP configuration setup tool or via the on board Web server.
SmartLinx EtherNet/IP instruction and use Objective: Show the user how to configure and use a EtherNet/IP SmartLinx communication module. AG052813 While every effort was made to verify the following information,
y = 4x + 2, 0 x 1 Name: Class: Date: 1 Find the area of the region that lies under the given curve:
Name: Class: Date: 1 Find the area of the region that lies under the given curve: y = 4x + 2, 0 x 1 Select the correct answer. The choices are rounded to the nearest thousandth. 8 Find the volume of the
9 Find the area of the figure. Round to the. 11 Find the area of the figure. Round to the
Name: Period: Date: Show all work for full credit. Provide exact answers and decimal (rounded to nearest tenth, unless instructed differently). Ch 11 Retake Test Review 1 Find the area of a regular octagon
Point Cloud Classification
Point Cloud Classification Introduction VRMesh provides a powerful point cloud classification and feature extraction solution. It automatically classifies vegetation, building roofs, and ground points.
Algebra 2 Semester 1 (#2221)
Instructional Materials for WCSD Math Common Finals The Instructional Materials are for student and teacher use and are aligned to the 2016-2017 Course Guides for the following course: Algebra 2 Semester
PORTABLE SURFACE ROUGHNESS GAGE. POCKET SURF
- PORTABLE SURFACE ROUGHNESS GAGE. POCKET SURF The Pocket Surf portable roughness gage is one of the easiest to use and most popular surface roughess gages ever made. The Pocket Surf performs traceable
Date Lesson Text TOPIC Homework. SA of Prisms & Pyramids Pg. 441 # 1, 3, 5a, 7b, 11bc, 16. Surface Area of Cylinders WS 6.6
UNIT 6 MEASUREMENT Date Lesson Text TOPIC Homework May 6.1 8.1 May 4 6. 8. The Pythagorean Theorem Pg. 4 # 1ac, ac, ab, 4ac, 5, 7, 8, 10 Perimeter and Area (NO CIRCLES) Pg. 4 # 1acde, abdf,, 4, 11, 14,
Appendix A - Calibration Data Sheets for Pika T701 Test Instruments Primary Anemometer Pre-Test Calibration
Appendix A - Calibration Data Sheets for Pika T701 Test Instruments Primary Anemometer Pre-Test Calibration Figure A1. Primary anemometer manufacturer calibration sheet pg 1 of 2. 29 Figure A2. Primary
SURFACE AREAS AND VOLUMES
CHAPTER 1 SURFACE AREAS AND VOLUMES (A) Main Concepts and Results Cuboid whose length l, breadth b and height h (a) Volume of cuboid lbh (b) Total surface area of cuboid 2 ( lb + bh + hl ) (c) Lateral