10 Reasons. Why Multi-Material 3D Printing is Better for your Product Design & Development. June 2012, Objet Ltd.

Transcription

1 10 Reasons Why Multi-Material 3D Printing is Better for your Product Design & Development June 2012, Objet Ltd.

2 Introduction Based on their innovative use of inkjet printing technology, Objet 3D printers are the only additive layer manufacturing devices in the world able to combine different 3D printing materials within a single 3D printed model. Objet is also the first 3D printing technology in the world to offer a choice of over 100 different 3D printing materials, ranging in properties from rigid plastic to rubber-like, opaque to transparent, and standard to engineering-grade ABS toughness. When talking about multiple-material 3D printing, we actually refer to a number of different capabilities which we will aim to categorize and clarify in this white paper. We will also outline the uses and advantages of this unique 3D printing technology for companies using rapid prototyping during the design and development of manufactured end products. Dual Material Jetting - The Technology Objet Connex 3D printing technology works by jetting two distinct Objet materials. The technology can work with any mix of rigid and flexible materials, various transparent and opaque materials, and different color materials. Each material is funneled to a dedicated liquid system. The liquid system is connected to the Objet printing block, which contains eight printing heads. Every head includes 96 nozzles, each measuring 50-microns in diameter. Each material has two designated printing heads that work in sync. Objet 3D printing block, consisting of 8 printing heads: - Heads 1 & 2 jet material A - Heads 3 & 4 jet material B - Heads 5-8 jet the support material 2

3 A Word about Objet Materials Objet s range of over 100 3D printing materials is based upon proprietary acrylicbased photopolymer resins. These materials are jetted as a liquid from sealed cartridges inserted into the machine. Once a layer of material is deposited on to the build tray, it is immediately cured by a UV light. The UV light follows the print head and turns each liquid material layer into a solid. The material is immediately ready to be built upon with successive layers. These fully cured models can be handled immediately after printing - a unique advantage over other rapid prototyping technologies and materials which require lengthy post-processing treatments. Loading and unloading the print cartridges is similar to the process of installing and removing inkjet cartridges from a paper-feed printer. 10 Advantages of Dual Material Jetting Independent Nozzle Control Objet s 3D printing technology is able to control every nozzle in every print head independently. This means that preset combinations of model materials can be jetted from designated nozzles to create new materials, different material parts within a model, as well as different material models that are being printed at once. Here are ten benefits of this unique dual-material jetting in more detail: 1. Fabricate Composite Digital Materials Composite materials have been in use for many years. They are used today in many industries, including building construction, sports equipment and car and aircraft manufacturing. Objet s Digital Materials are multi-phase composite materials created by the Objet Connex 3D printing system. The benefit of Digital Materials is the ability to produce new, composite materials with attributes that are not available in the individual constituents. Based on this multi-material jetting technology, the Connex family of 3D printers is able to simultaneously print two resin materials to create 90 different types of Digital Materials. Starting with 17 cartridge-ready materials, Objet Connex users 3

4 have the ability to choose from a total of 107 different materials and composite material combinations. Digital Materials have mechanical and physical properties that vary from the primary, cartridge-based materials. This additional set of materials improves upon the mechanical properties available from the existing materials - providing new values of tensile strength, flexural strength and Izod Impact. Rubber-like Digital Materials enable the precise selection of new Shore A values to suit the specific application purposes of the designer. Objet s Digital Materials are generated on the fly, based on the two cartridgebased materials that are installed in the system. The selection of the Digital Material is made by the user through dedicated software that determines the appropriate jetting parameters. The materials are created automatically during printing, without the need for additional human input. 2. A Recipe for Future Scalability 90 Digital Materials can be derived from just a small number of primary materials. Every additional new material introduced therefore opens up tens of new Digital Material options. With Objet s multi-material technology, the potential palate of Digital Material combinations will continue to expand and grow exponentially. Objet Material Range Increase over Time With Over 100 Materials by Simulate Plastics with Engineering Properties When the Objet multi-material process combines specific rigid materials with specific flexible materials, the resulting Digital Material can be tougher than the individual material components from which it is comprised. 4

5 Objet s ABS-like Digital Material is an example of such, combining the toughness of one material with the temperature resistance of a second material to provide a hybrid that can simulate ABSgrade engineering plastics. Using this advanced material, designers, engineers and manufacturers can achieve advanced functional simulation of their intended end-product without the fear of easy breakage. Full Size 3D Printed Stool in Objet ABS-like Digital Material able to support 100kg Examples include a foldable stool able to support over 100kg in weight, functioning clips and closers that can be repeatedly flexed and stressed, functional wrenches and even functional bike parts that can be taken directly from the 3D printer to the bicycles in the field! 5

6 4. Segregate Different Materials within One Consistent Model We previously mentioned the concept of creating a new material by combining two materials in the Objet jetting process. With this you can, of course, produce a uniform part made of one consistent color or rigidness. We can now move on to the next unique ability of Objet multi-material jetting technology segregating these different materials and Digital Materials within a single 3D-printed object. Thanks to the different nozzles within the print-head, Objet Connex 3D printers can selectively create up to 14 different Digital Materials based on the two cartridges in the machine and then selectively deposit each of these 14 in a different part of the model with sharp, defined material boundaries. 3D Printed Shape in Objet Clear Transparent Material with Black Hand Suspended Inside This mixed part 3D printing capability eliminates the need to design and print separate parts using different materials and then assemble them together in a post-printing process, such as gluing. Using this capability, it is possible to simulate highly complex shapes, color shade mixes and unique geometries that combine different material elements. Razors 6 printed simultaneously in a single run. Each razor is composed of different materials with different mechanical properties (rigid and flexible). 5. Segregate Different Material Models on the Same Print Tray In order to maximize system yield, the Objet Connex has the ability to simultaneously build different material parts on a single tray. This can improve productivity for companies requiring high volume prototyping. Using this feature increases the system s efficiency, enabling multiple build varieties to

7 be printed at the same time. This allows designers to then quickly select the most suitable model. 6. Create Grayscales and Tones One of the advantages of using more than one model material is the ability to create grayscales and tones. For example, when using Objet Rigid Black and Rigid White primary materials it is possible to combine them in various ratios to create different grayscales. Creating grayscales and tones makes it possible to print marks and signs on a model, mark desired areas of interest and even add captions. The application uses for this capability are endless, ranging from artistic designs to functional simulation of assembled goods that, in the consumer world, are typically made of different material parts and then assembled. 7. Simulate Opaque Shades with Clear Transparency Popular in the medical industry, Objet s Connex line of multi-material 3D printers is used to create accurate models of body parts in transparent material with the internal structures in black, white, blue or grey shade combinations so that they are visible beneath the skin. The same process allows us to freeze objects or writing within a glass-like casing for the accurate simulation of consumer goods and electronics. Within the mechanical engineering world it is possible to use the opaque within a transparent model concept to highlight the internal structure of objects or to simulate areas of load useful in the design of 7 3D-printed corset prototype in gray shades. Courtesy of Neri Oxman. Shower head 3D printed in Objet Clear Transparent material with internal Objet Black Rubber-like Digital Material (Shore 40). Courtesy of Ideal Standard CG Germany.

8 weight-bearing parts for automotive, defense and architectural projects. 8. More Efficient Short Series Injection Molding Injection molds are usually constructed from specialty steel tools and are expected to withstand hundreds of thousands, or even millions of molding cycles. As such, molds are very expensive and the costs associated with mold construction increase significantly with part complexity. Tool construction is a long process that may take months. After the tool is ready, it is tested and usually additional correction is required. In some case, before going into tool steel molds, a preproduction aluminum tool is constructed for validation purposes. Although this may take less time as compared to the production of steel tools, it may still take several weeks. 3D printing the tool in Objet ABS-like Digital Material and using this for the injection molding of the intended plastic has several advantages including: Real prototype in hand early on in the design process More economical small series production Fast mold validation - reduced time to final mold Reduced time-to-market for final part and reduced overall costs Objet ABS-like Digital Material being used as a fast, economical short series injection mold 9. Combine Rigid Material with Rubber-like Over-Molding Objet Connex 3D printers simultaneously print parts with different mechanical properties. This capability enables the user to test 3D printed prototypes that are very close to the production part in terms of mechanical properties and material combinations, e.g., over-molding and double injection. Prototyping in this way aids in the selection of the materials that will be used in the final product. This process saves days of simulating and preparing complex and expensive molds for double injection. It also eliminates the need for silicon molds and preparation of different end-product materials for testing; most of the testing can be performed early on with prototypes printed overnight on the Objet Connex system. 8

9 This capability improves the communication between different groups and decision makers in the company, such as R&D, internal/external customers, engineering, marketing, sales and management. The ability to combine rigid and flexible rubber-like materials is a real necessity for applications that have a rigid body with areas of flexible material for grips and protection of the mechanism, and thus require a double-injection production process. This pressing need exists in most of the current products in consumer goods and electronics, automotive, shoe and medical industries. A GPS device with over-molding, 3D-printed in a single run on the Objet Connex. Eliminates the need for providing separate silicon molds and then gluing them together. A cellular phone with a rigid body, rubber-like keys and over-molded parts is one example of such an application. Other examples are a car wheel printed complete with its rubber-like tire or a shoe sole with over-molded, rubber-like treads. 10. Combine High Temperature Material with Rubber-like Material Combing Objet s High Temperature material with Rubber-like materials enables the formulation of high-temperature parts with over-molding. Automotive airventilation systems, for example, can now be printed in Objet s High Temperature material with Rubber-like over-molded edges to produce an air-tight fit for moving opening/closing paddles. When combined to produce Digital Materials, the High Temperature/Rubber-like combination produces composites with both durability and temperature resistance suitable for a range of applications such as medical devices, surgery planning, automotive parts or models used in high humidity environments. 9

10 Summary Objet has expanded their material range to 107 materials. 90 of these are Digital Materials, derived by the composite mixing of primary Objet materials. More than ever before, this expanded material range allows designers, engineers and manufacturers to simulate very precise material properties that closely resemble their intended end-product. This development places Objet users at the forefront of additive manufacturing and rapid prototyping. Designers can now select from materials ranging from rigid to rubber-like substances in terms of texture; standard to ABS-grade engineering plastic in terms of toughness; and transparent to opaque in terms of clarity and shades. The Objet Connex multi-material 3D printer allows users to combine up to 14 of these materials at the same time within a single consistent model. Objet Connex350 with multi-material 3D printed model ready for removal from the build tray. Using the Objet Connex enables the 3D printing of prototypes that are very close to the production part in terms of mechanical properties and material combinations, e.g., over-molding. Objet Connex technology also enables designers to simultaneously print different material versions of the same part; completely different material parts together on the same tray; or short-run injection molds. All of this results in very significant time savings and reduces the overall product development cost. As Objet continues to exponentially grow its material range, these new prototyping possibilities will serve to further improve the product development process for virtually every industry segment in every stage of prototyping, from initial form concept; to fit testing; to final functional verification. 01 Variety of multi-material 3D printed models printed at the same time on the same Objet Connex build tray.

11 About the Objet Connex Multi-Material 3D Printing System The Objet Connex range of multi-material 3D printers includes the Objet Connex500 with a build volume of 500 x 400 x 200 mm (19.7 x 15.7 x 7.9 inches), the Objet Connex350 with a build volume of 350 x 350 x 200 mm (13.8 x 13.8 x 7.9 inches) and the Objet260 Connex with a build volume of 260 x 260 x 200mm (10.02 x x 7.9 inches) The Objet Connex range of 3D printers offers three printing modes: Digital Material (DM) printing mode operates at 12 mm per hour in 30 micronlayers, providing the ability to print parts made of multiple model materials including Digital Materials. High Quality (HQ) printing mode builds parts at 12 mm per hour in 16-micron ( inch) layers. Objet Connex500 Multi-Material 3D Printing System High Speed (HS) printing mode runs at 20 mm per hour in 30 micron (0.001 inch)-layers. Printing 600 x 600 dpi in both the X and Y axes, the Objet Connex enables thin walls down to 0.6mm, fine details in all dimensions, and a smooth surface finish, assuring high quality for every part. Highly precise 3D printing, with a maximum tolerance of 0.3mm over large models ensures repeatability and accuracy. Objet Connex 3D printers support four sealed 3.6kg (7.9 lb.) cartridges of material, allowing unattended operation for extended periods. The systems enable the loading of 2 different model material types when using the DM printing mode. 00

12 About Objet Objet Ltd., is a leading provider of high quality, cost effective inkjet-based 3D printing systems and materials. A global company, Objet has offices in North America, Europe, Japan, China, Hong Kong, and India. Objet s 3D printing systems and 3D printing materials are ideal for any company involved in the manufacture or design of physical products using 3D software or other 3D content. Companies using Objet s solutions can be typically found in sectors such as consumer goods & electronics, aerospace & defense, automotive, education, dental, medical and medical devices, architecture, industrial machinery, footwear, sporting goods, toys and service bureaus. Founded in 1998, the company has thousands of customers worldwide including a substantial share of the relevant Fortune 100 and Fortune 500. Its award-winning technology (12 awards in 5 years) is based upon over 110 patents and patent pending inventions. Objet s advanced 3D printing systems and range of over 100 materials enable professionals to build prototypes that accurately simulate the true look, feel and function of an end-product, even complex, assembled goods. The Objet Connex line of multi-material 3D printers features the world s only technology to simultaneously jet 2 materials. With this, users can print many different materials into a single part and print various mixed parts on the same build tray. Users can also create advanced composite materials, or Digital Materials featuring unique mechanical and thermal properties. Objet s range of over 100 3D printing materials simulate properties ranging from rigid to rubber-like, transparent to opaque and standard to ABS-grade engineering plastics, with a large number of in-between shore grades and shades. Objet s 3D printers are available in a range of form-factors, from cost-effective desktop 3D printers ideal for entry-level professionals all the way to industrial-scale multi-material machines for frontline designers and top manufacturers. Objet s 3D printers feature the industry s highest-resolution 3D printing quality, based on 16-micron ( in.) super-thin layering, wide material versatility, office friendliness and ease of operation. For more information, visit us at and for more about 3D printing industry-related news, business issues and trends, read the Objet blog. DISCLAIMER: Objet Ltd. does not guarantee the final release and availability of materials, products and/or features referred to herein. Materials will be released subject to Objet s sole discretion. Not all released materials are currently available for all platforms/systems. Objet will update its website further to releases become available and/or compatible with specific platforms/systems. Trademarked company and product names are the property of their respective owners. 02