Page 1 of 8. TBE/KBE-REV Issue 11.0 TBE/KBE REVISION LIST. Document Issue Description of Revisions TBE/KBE HI 1 (E) 2 (E)
|
|
|
- Winifred Byrd
- 5 years ago
- Views:
Transcription
1 Page 1 of 8 TBE/KBE REVISION LIST Document Issue Date Supersedes TBE/KBEREV Issue 11.0 TBE/KBE HI Issue, July 004 Removed referenses to Barsebäck and removed chapter 9. TBE (E) Updating Enclosure class, item.4.1 Transient disturbances in main and auxiliary power supply, item.11 5 (E) Revised documentation requirements, section 7, page 19 FAT, SAT and OAT moved to KBE (E) Updated table in chapter.9 TBE (E) Updating (E) Updating Severity D, Applicable to equipment installed at nonweatherprotected locations Updating of standard EN 6059 to IEC (E) Definition of severity A has been reformulated. 7 (E) Minor update TBE 10:1 Updating Updating (General values concernig ionsing radiation deleted from Table 1). 4 (E) Minor update TBE 10: Issue, August 1999 Updating Barsebäck has been deleted. SKI changed to SSM. 4 (E) Minor update. Table with 5 % attenuation added. TBE 10 Reworked 4 (E) Updating Starting current, item..1 and EMC requirements, item (E) Specific design requirements for manufacturing are removed. ISO changed to ISO 881. SSEN class R changed to EN class B. 6 (E) TBE supplement. Editorial updating. Updating Replaced by TBE 104:1 and TBE104: dec 0, TBE 104:1 Updating of standard IEC 6097 to IEC 6097 and EN to IEC Requirements for components with simple microprocessors have been added. TBE 104: Updating of standard SMS 156 to SSEN
2 TBE/KBE Revision List Issue 1.0 Page of 8 4 (E) Updating of standard SS EN 87 to EN 87, SS EN 47 to EN 47 and SMS 156 to EN Requirements for components with simple microprocessors have been implemented. TBE 105 Updating of standardreferences TBE 106:1 TBE 106: Updating IEC 6055 to IEC , SS EN 661 to EN 661 and SS EN 6060 to IEC (E) IEC Electrical Relays have been deleted. Reworked after OKG comments June Editorial updating. Reworked after OKG comments June Editorial updating. TBE 106:11 New TBE 106:1 New TBE 106:1 New TBE 106:1 New TBE 106: New () TBE 106: New TBE 106:1 New TBE 106: New TBE 106: New TBE 107 New, Network components TBE 108 New Updating TBE 110 TBE 111 Updating of standard ISO 9000 to ISO/IEC 9000: Abolished, will be handled by TBE 106:1 Updating of standard ISO 9000 to ISO/IEC 9000: The standard IEC and IEC 618 has been added. Updating of standard IEC 987 to IEC The standard IEC has been added. Updating of standard ISO 9000 to ISO/IEC 9000: Abolished, will be handled by TBE 106: Updating of standard ISO 9000 to ISO/IEC 9000: The standard IEC has been added. Updating of standard IEC 987 to IEC The standard IEC has been added. Updating of standard ISO 9000 to ISO/IEC 9000: Abolished, will be handled by TBE 104:1 Updating of standard ISO 9000 to ISO/IEC 9000: Abolished, will be handled by TBE 106: Updating of standard IEC 987 to IEC Abolished, will be handled by TBE 106: Updating of standards. The document is updated to a more modern image requirements. H5 incident is also included. Item.5 updated.
3 TBE/KBE Revision List Issue 1.0 Page of 8 TBE 11 TBE 11 4 (E) Updating of standard IEC 16 to IEC Reworked with definition of cables installed in process locations and reactor containment Updating of standard IEC 780 to IEC Updating of TBE 11 to TBE 11:1 and TBE 11:. TBE 11:1 Technical Requirements for stationary batteries vented types Updating with requirements regarding Calculation margin, Ageing margin and required cycling before capacity and profiletest TBE 11: Technical Requirements for stationary batteries valve regulated types (AGM) Updating with requirements regarding Calculation margin, Ageing margin and required cycling before capacity and profiletest The permitted cell voltage spread, at float charge and with a fully charged battery, will be changed from ±0,8V to ±0,08V of the average cell voltage TBE 116 TBE 118 Updating Reworked 4 (E) Updating of standard SS47019 to SSEN SS EN 60491T1 abolished, IEC 947 added..4 completed. TBE 10 TBE 1 KBE 100 KBE 1001 KBE 100 KBE 100 Updating 4 (E) Reworked 5 (E) Item.1. Updating of standard IEC 6098 u to IEC u (E) Updating, EMC requirement Item.1 IEC 947 added..4 completed. Editorial updating. Updating Updating Updating of standard IEC 79 to IEC (E) Updated with chapter 6 Replaces of KBE 1001, och dec 0 Updating of standard ISO 9000 to ISO/IEC 9000: Updating of standard ISO 9000 to ISO/IEC 9000: Updated with definitions for FAT, SAt and OAT. Updated with references to EP 190 series. Updating of standard ISO 9000 to ISO/IEC 9000: Updated with definitions for FAT, SAt and OAT. Updated with references to EP 190 series.
4 TBE/KBE Revision List Issue 1.0 Page 4 of 8 KBE IP10 1 Updating Updating Replaced by ip according to below. KBE IP KBE IP10. 1 KBE IP10. 1 KBE IP KBE IP104/1 1 Updating KBE IP104/ 1 Updating Updating KBE IP104/ 1 Updating IP 104/1, 104/ and 104/ replaces of ip104:1.1, ip104:1., ip104:.1 and ip104:. according to below KBE IP104:1.1 1 Removed references to KBE IP 106: and KBE IP 106: KBE IP104:1. 1 KBE IP104:.1 1 KBE IP104:. 1 Removed references to KBE IP 106: and KBE IP 106: Examination procedure Burn in Test has been deleted. References to the manufacturer s standard procedures for calibration and functional verification has been added. Removed references to KBE IP 106: and KBE IP 106: References to the manufacturer s standard procedures for calibration and functional verification has been added. Removed references to KBE IP 106: and KBE IP 106: KBE IP105 KBE IP106:1 1 Reworked Abolished KBE IP106: 1 Reworked Abolished KBE IP106:1 KBE IP106:1 KBE IP106: Converted to the new template for Inspection Plans and updating of standard ISO 9000 to ISO/IEC 9000: Standard IEC 618 has been added. Converted to new template for Inspection Plans Editorial changed. Converted to the new template for Inspection Plans and updating of standard ISO 9000 to ISO/IEC 9000: Editorial changed.
5 TBE/KBE Revision List Issue 1.0 Page 5 of 8 KBE IP106: Converted to new template for Inspection Plans Editorial changed. KBE IP106: Converted to the new template for Inspection Plans and updating of standard ISO 9000 to ISO/IEC 9000: Abolished, will be handled by KBE IP 106: KBE IP106: Abolished, will be handled by KBE IP 106: KBE IP107 1 New, KBE IP108 KBE IP110 Completed with H5 incident KBE IP Updated titel KBE IP Updated titel KBE IP Updated titel KBE IP Updated titel KBE IP11 KBE IP11 Updating Updating KBE IP116 1 Updating Updating, IP116 replaces of ip116.1 and ip116. according to below. KBE IP KBE IP KBE IP118 1 IP118 replaces of ip118.1 ; 118. ; 118. och according to below KBE IP Converted to the new template for Inspection Plans and updating of standard SSEN 6049 to IEC/TR KBE IP KBE IP KBE IP KBE EP150 addition document Updating 4 Reworked KBE IP10 1 KBE EP150 addition document Updated 4 KBE IP10 replaces according to below. KBE IP KBE IP10. 1 KBE IP10. 1 KBE IP KBE IP1 1 KBE EP101 Editorial change KBE EP10
6 TBE/KBE Revision List Issue 1.0 Page 6 of 8 Updating of standard IEC 664 to IEC KBE EP104 Updating of standard SSIEC 48 to SSEN ) KBE EP105 Reworked KBE EP108 KBE EP109 KBE EP111 Reworked KBE EP11 KBE EP114 KBE EP115 KBE EP1 Updating KBE EP18 Updating, KBE EP18 replaces of KBE EP18:1 and KBE EP18:. KBE EP18:1 Acceptance test Stationary Batteries vented types KBE EP18: Acceptance test Stationary Batteries valve regulated types (AGM) KBE EP11 1(E) KBE EP1 KBE EP1 KBE EP14 KBE EP15 KBE EP16 KBE EP17 KBE EP141 KBE EP14 KBE EP146 KBE EP147 KBE EP148 KBE EP150 KBE EP151 KBE EP15 (E) Updating Replaces of EP111 dec 0 Updating of standard SSIEC 16 to SSEN Removed text in chapter. Reference to KBE EP 154 Addition sections (.0 and 4.0). Editorial updating. Reference to KBM has been added. Updating conected with the issuing of TBE 10:, august 99 Updating 4 (E) Minor update Updating Reworked 4 (E) Updating of table with Severity D, Applicable to equipment installed at nonweatherprotected locations (E) Minor update Updating
7 TBE/KBE Revision List Issue 1.0 Page 7 of 8 KBE EP15 Updating Reworked KBE EP154 Updating Minor update. Requirement profiles replaced with test profiles. KBE EP160 KBE EP161 Aboliched. Replaced by KBE EP170 KBE EP16 Aboliched. Replaced by KBE EP170 KBE EP16 Aboliched. Replaced by KBE EP170 KBE EP164 Aboliched. Replaced by KBE EP170 KBE EP165 Aboliched. Replaced by KBE EP170 KBE EP166 Aboliched. Replaced by KBE EP170 KBE EP167 Aboliched. Replaced by KBE EP170 KBE EP168 Aboliched. Replaced by KBE EP170 KBE EP169 Aboliched. Replaced by KBE EP170 KBE EP170 New. Replaces KBE EP Updating KBE EP171 Aboliched. Replaced by KBE EP170 KBE EP17 Aboliched. Replaced by KBE EP170 KBE EP17 Aboliched. Replaced by KBE EP170 KBE EP174 Aboliched. Replaced by KBE EP170 KBE EP176 KBE EP180 (E) Updated with references to ISO/IEC and EN 1004 KBE EP18 KBE EP18 Reworked Aboliched. KBE EP18 New Updating of standard ISO 9000 to ISO/IEC 9000: KBE EP18 New KBE EP184 Aboliched. KBE EP184 New KBE EP184 New KBE EP185 Aboliched. KBE EP185 New Updating of standard ISO 9000 to ISO/IEC 9000: Reworked according to text in KBE EP 19 KBE EP185 New Reworked according to text in KBE EP 19 KBE EP186 Reworked KBE EP187 Reworked Updated. Valid for any kind of equipment. KBE EP190
8 TBE/KBE Revision List Issue 1.0 Page 8 of 8 KBE EP191 New, KBE EP19 (E) New, Updated text about documentation changes after FAT KBE EP19 New, KBE EP194 New,
Document Title Issue Date. TBE/KBE-DOC TBE/KBE Document List TBE/KBE-REV TBE/KBE Revision List
Sid 1 (6) TBE/KBE DOCUMENT LIST Document Issue Date Supersedes TBE/KBE-DOC 12.0 2013-08-20 Issue 11.0 TBE/KBE-DOC TBE/KBE Document List 12.0 13-08-20 TBE/KBE-REV TBE/KBE Revision List 12.0 13-08-20 TBE/KBE
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN ACADEMY OF METROLOGY AND QUALITY INSPECTION 1 NETC Building, No. 4 Tongfa Road Xili, Nanshan Shenzhen, Guangdong, 518055, People s Republic of China
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BAY AREA COMPLIANCE LABORATORIES CORP. No. 69 Pulongcun Puxinhu Industrial Zone, Tangxia Town Dongguan, Guangdong 523719 People s Republic of China Mr. David
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MICROSOFT EMC LABORATORY 1 17760 NE 67 th Court Redmond, WA 98052 Sajay Jose Email: sajose@microsoft.com Phone: 425 421 9799 ELECTRICAL (EMC) Valid to: August
Supplement. Manual Title: DSP-4000 Series User Supplement Issue: 3 Print Date: July 2001 Issue Date: 10/02 Revision/Date: Page Count: 4
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Supplement Manual Title: DSP-4000 Series User Supplement Issue: 3 Print Date: July 2001 Issue Date: 10/02 Revision/Date:
Vydané publikácie IEC (od 1. októbra 2011 do 31. októbra 2011)
Electrical engineering IEC 60071-SER ed1.0 (2011-10) Insulation co-ordination - ALL PARTS IEC 60086-SER ed1.0 (2011-10) Primary batteries - ALL PARTS IEC 60475 ed2.0 (2011-10) Method of sampling insulating
Design, Control and Application of Modular Multilevel Converters for HVDC Transmission Systems by Kamran Sharifabadi, Lennart Harnefors, Hans-Peter
1 Design, Control and Application of Modular Multilevel Converters for HVDC Transmission Systems by Kamran Sharifabadi, Lennart Harnefors, Hans-Peter Nee, Staffan Norrga, Remus Teodorescu ISBN-10: 1118851560
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN ACADEMY OF METROLOGY AND QUALITY INSPECTION 1 NETC Building, No. 4 Tongfa Road Xili, Nanshan District Shenzhen, Guangdong, 518055, People s Republic
Intelligent On-Line UPS
Intelligent On-Line UPS Intelligent On-Line UPS Unity Input Power Factor Single-Chip Microprocessor Control Wide Input Voltage Range Pure Sinewave Output Smart RS-232 Communication Interface External Battery
Volume I, Appendix B References Table of Contents
Volume I, Appendix B References Table of Contents B Appendix - References... B-1 B.1 Documents Incorporated in the Guidelines... B-1 B.2 Other Documents Used in Developing the Guidelines... B-3 B.3 Additional
GUIDELINES ON FEATURES AND TECHNICAL SPECIFICATIONS FOR MOBILE CELLULAR DEVICES IMPORTED INTO AND DISTRIBUTED IN KENYA
GUIDELINES ON FEATURES AND TECHNICAL SPECIFICATIONS FOR MOBILE CELLULAR DEVICES IMPORTED INTO AND DISTRIBUTED IN KENYA June 2018 Table of Contents 1. Scope... 3 2. References... 4 3. Abbreviations and
INSTRUCTION MANUAL TRIP CIRCUIT SUPERVISION RELAY GKAD1
INSTRUCTION MANUAL TRIP CIRCUIT SUPERVISION RELAY GKAD1 TOSHIBA Corporation 2004 All Rights Reserved. ( Ver. 1.6 ) Safety Precautions Before using this product, please read this chapter carefully. This
DENISON HYDRAULICS Jupiter Power Supply Accessory Series S
DENISON HYDRAULICS Jupiter Power Supply Accessory Series S20-11715-0 Jupiter Power Supply Accessory S20-11715-0 Jupiter Power Supply Accessory w/ Driver Card S20-11712 Publ. 9-AM686 E-Mail: denison@denisonhydraulics.com
PCU Supervisory module for the RM 1000 series
Supervisory module for the RM 1000 series PCU 10.00 Microprocessor based control unit for supervision of internal and external functions in systems comprising RM 1000 rectifiers. Input power: 18-72V DC
SV 30A Acoustic calibrator
INSTRUMENTATION FOR SOUND AND VIBRATION MEASUREMENTS SV 30A Acoustic calibrator User s manual Warsaw, May, 2006 SVANTEK Sp. z o.o. Production Department & Service Pl. Inwalidów 3/62 ul. Chodakowska 26/32.
VIDI System Controller
1 VIDI System Controller for OPUS DC Power Systems Product description VIDI is the advanced monitoring and control device for OPUS DC Power Systems. It delivers intelligence, an easy-to-use interface and
Cable into the Future: Industrial Ethernet with 10 Gbps
Cable into the Future: Industrial Ethernet with 10 Gbps A White Paper presented by: Bernd Horrmeyer Industrial Network Cabling Specialist Phoenix Contact GmBH & Co. KG Blomberg, Germany Phoenix Contact
IV-30 Operating Manual for Pulse Distributor Cassette with potential separation
IV-30 Operating Manual for Pulse Distributor Cassette with potential separation Edition-/Rev.-Date: 09/08/2006 Document-/Rev.-No.: TR - EAK - BA - GB - 0093-02 Software version: - File name: TR-EAK-BA-GB-0093-02.DOC
EMISSION MEASUREMENT Power Frequency Testing
EMISSION MEASUREMENT Power Frequency Testing This document has been optimized for electronic media POWER FREQUENCY TESTING QUALITY AND RELIABILITY OF THE POWER NETWORK The power network is an essential
IEEE Nuclear Power Engineering Standards Collection VuSpec - Active Only
IEEE Nuclear Power Engineering Standards Collection VuSpec - Active Only Includes 117 Active IEEE Standards, Guides, Recommended Practices, Errata and Interpretations in PDF Format (for viewing on-screen
Data Sheet. Digital Multifunctional Power Meter with LCD Display and Optional Modules WPM D
WPM 770 Data Sheet 679.D.141.02 Digital Multifunctional Power Meter with LCD Display and Application The digital Weigel Power Meters WPM 770 have been designed to display the electrical parameters in low
EU-type Examination Certificate
0402-MID-527503 Issued to Sunit Oy, Taitoraitti 1, FIN-87400 Kajaani, Finland In respect of (type of instrument) Taximeter model Sunit fc2, type SFDIN1-411543-AT In accordance with The Measuring Instruments
CCD1100S. Technical Data Sheet
CCD00S Technical Data Sheet CCD00S Compact Controller with Display 4 Buttons 3.2 colour TFT 38 configurable I/O Programmable via Guitu Designed f operation at both 2V DC and 24V DC Real Time Clock CCD00S
Modular UPS S KVA
Scalable 3 - phase, double conversion UPS system with hot-plug design up to 220 KVA (n + 1). The modular design with 20 KVA modules makes any system up or downgrade flexible and avoids high inv estment
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BAY AREA COMPLIANCE LABORATORIES CORP. 6/F, the 3rd Phase of WanLi Industrial Building Shihua Road, Futian Free Trade Zone Shenzhen, Guangdong 518038 People
SV 33 Acoustic calibrator
INSTRUMENTATION FOR SOUND AND VIBRATION MEASUREMENTS SV 33 Acoustic calibrator User s manual Warsaw, 17 June, 2014 SVANTEK Sp. z o.o. www.svantek.com e-mail: office @ svantek.com.pl 02-872 Warszawa, ul.
SATURN DATACENTER & SERVERS TELECOMMUNICATION DEVICE INDUSTRIAL APPLICATION TRANSPORTS. Smart Energy Solutions
10-20 kva single phase/single phase and three phases/single phase 10-200 kva three phases/three phases DATENTER & SERVERS TELECOMMUNICATION DEVICE INDUSTRIAL APPLICATION TRANSPORTS Smart Energy Solutions
High Performance Tension Controller HPTC Electrical Connection Manual
High Performance Tension Controller HPTC Electrical Connection Manual TTS Systems Limited 14, Highpoint Business Village, Henwood, Ashford, Kent, TN24 8DH Contents Electrical Overview... 3 Power Supply
Standards Update Notice (SUN) Issued: August 11, 2017
Standard Information Standard Number: UL 621 Standard Name: Ice Cream Makers Standard Edition and Issue Date: 7 th Edition Dated May 7, 2010 Date of Revision: February 15, 2017 Date of Previous Revision
Regulatory Update Brazil
Product Compliance Specialists Ltd Tel: +44 1844 273 277 The Malthouse, Malthouse Square, Fax: +44 1844 273 278 Princes Risborough www.productcompliancespecialists.com Bucks, HP27 9AZ info@productcompliancespecialists.com
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. LAIRD TECHNOLOGIES, INC. W66 N220 Commerce Court Cedarburg, WI Adam Alger Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LAIRD TECHNOLOGIES, INC. W66 N220 Commerce Court Cedarburg, WI 53012 Adam Alger Phone: 262 375 4400 ELECTRICAL (EMC) Valid to: January 31, 2019 Certificate
ABL8BBU24200 battery control module V DC - 24 V - 20 A - for regulated SMPS
Characteristics battery control module - 24..28.8 V DC - 24 V - 20 A - for regulated SMPS Main Range of product Product or component type Input voltage Output voltage Maximum output current Phaseo Battery
EA-01/01 List of EA Publications
Publication Reference EA-01/01 List of EA Publications 21 September 2006 1 of 9 Authorship This document has been prepared by the EA Secretariat. Official language The text may be translated into other
Flow simulation system PROline FieldCheck
Technical Information TI 059D/06/en 50101259 Flow simulation system PROline FieldCheck Simulation and verification of flow measuring systems Features and benefits Checking the function and deviation in
Installation Instructions
Installation Instructions Cat. No. 1771-IQ16 Series C This document provides information on: The dc isolated input module is shipped in static-shielded packaging to guard against electrostatic discharge
Volume I Appendix B. Table of Contents
Volume I, Appendix B Table of Contents B Appendix -...B-1 B.1 Documents Incorporated in the Standards...B-1 B.2 Standards Development Documents...B-3 B.3 Guidance Documents...B-4 i Volume I Appendix B
10 kva 3/1 15 kva 3/1 20 kva 3/1 10 kva 3/3 15 kva 3/3 20 kva 3/3 30 kva 3/3 40 kva 3/3 UOUS SERV WARRANTY
OF CONTINUOUS SERVICE YEARS WARRANTY B8000 FXS 10-40kVA BORRI B8000 FXS With disturbances to the electrical supply being one of the major causes of IT downtime, the UPS system is regarded as the most critical
USER MANUAL. Frequency Converter 15kVA 3x200V 400Hz Type AC/AC Frequency Converter
USER MANUAL Frequency Converter 15kVA 3x200V 400Hz Type 140331 EPS Stromversorgung GmbH FON +49 (0) 821-570 451-0 Alter Postweg 101 FAX +49 (0) 821-570 451-25 86159 Augsburg MAIL info@eps-germany.de Germany
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61326 First edition 2002-02 Electrical equipment for measurement, control and laboratory use EMC requirements This English-language version is derived from the original bilingual
USING STANDARDS TO ASSESS THE COMPETENCE OF CONFORMITY
Ref. Ares(2014)2675967-13/08/2014 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Regulaty policy Regulaty Approach f the free movement of goods NOTE TO THE SENIOR OFFICIALS GROUP ON STANDARDISATION
THOR Modular. Modular UPS system. Online double-conversion Scalable Decentralized Parallel. Modular. 10, 20, 30, 40kVA modules kVA systems
Power Supplies Modular THOR Modular Modular UPS system Online double-conversion Scalable Decentralized Parallel Modular 10, 20, 30, 40kVA modules 10-520kVA systems Power factor 1.0 at 10/20kVA/kW modules
ABL8BBU24400 battery control module V DC - 24 V - 40 A - for regulated SMPS
Characteristics battery control module - 24..28.8 V DC - 24 V - 40 A - for regulated SMPS Main Range of product Product or component type Input voltage Output voltage Maximum output current Complementary
Operational Equipment Power and Environment Standard
Operational Equipment Power and Environment Standard Contents 1 Scope -3 2 Invitation to Tender Response -3 3 Generic Requirements for Equipment Environment -3 3.1 Environmental Conditions -3 3.2 Specific
MINI MCR-SL-UI-2I(-SP)(-NC)
Data Sheet 03/2005 Product Description Features Configurable signal duplicator MINI MCR-SL-UI-2I(-SP)(-NC) is used to electrically isolate, condition, amplify, and filter analog standard signals. On the
OPERATOR S MANUAL ATE 1/2 RACK POWER SUPPLY AUTOMATIC TEST EQUIPMENT MODEL
OPERATOR S MANUAL ATE 1/2 RACK POWER SUPPLY AUTOMATIC TEST EQUIPMENT KEPCO INC. An ISO 9001 Company. MODEL 250W ATE 6-25, ATE 15-15, ATE 25-10, ATE 36-8, ATE 55-5, ATE 75-3, ATE 100-2.5, ATE 150-1.5, ATE
Liebert NX - Next Generation UPS for protecting your Business Critical Systems. AC Power Systems for Business-Critical Continuity
- Next Generation UPS for protecting your Business Critical Systems AC Power Systems for Business-Critical Continuity Advanced UPS Technology Protects Modern IT Equipment Today s advanced digital computing,
Series F75 Fail-Safe Module Installation, Operation and Maintenance Instructions
WCAIM2029 (Part 16022) Series F75 Fail-Safe Module Installation, Operation and Maintenance Instructions CAUTION: Flowserve recommends that all products that must be stored prior to installation be stored
Sources of Test Reports for TUV SUD BABT Product Certification BABT766. TUV SUD BABT is a certification body of. TUV SUD BABT 2015 Issue 7
BABT766 Sources of Test Reports for TUV SUD BABT Product Certification TUV SUD BABT is a certification body of TUV SUD BABT 2015 Page 1 of 5 Contents 1 Introduction... 2 2 Background... 2 3 General...
Decision on accreditation (3 appendices)
Industry division Ann-Louise Skoglund Direktnr: +46 33 177706 E-post: ann-louise.skoglund@swedac.se ABB AB STRI - 771 32 Ludvika Decision on accreditation (3 appendices) Decision Swedish Board for Accreditation
Sirius series. on-line
U.T.E. Electronic GmbH & Co. KG - Friedrich-Ebert-Str. 112a - 58454 Witten Tel.: 02302-282830 - Email: info@ute.de - Internet: www.ute.de Sirius series on-line UPS 10 20 kva single/single phase and three/single-phase
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY CO. LTD. Fl. 3, Building A, Fei Yang Science Park No. 8 Long Chang Road, Block 67 BaoAn District, Guangdong Province,
PEN & PCEN SERIES SINGLE PHASE 1KVA ~ 30KVA THREE PHASE 6KVA ~ 200KVA
Solid State AC Voltage Stabiliser / Power Line Conditioner Highly Accurate Power Conditioning Protection against Voltage Fluctuations and Line Disturbances AC Mains voltage fluctuations, common mode noise,
Supplemental Information
Retirement of NPCC Directory# 3 Supplemental Information On April 1, 2015, NPCC Directory# 3 was retired upon the effective date of PRC-005-2 Protection System Maintenance which is subject to a 12 year
Industrial Power Supplies
50-600 Watt Features Switch mode power supplies for DIN-rail mounting 6 power ranges with 2, 3, 6, 12, 20 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise
SPECIFICATION FOR THE SUPPLY OF A BATTERY MONITORING SYSTEM
SPECIFICATION FOR THE SUPPLY OF A BATTERY MONITORING SYSTEM ESG20020202-3-2 February 27 th 2008 Project number reference:- File Number:- Prepared by:- Company:- Address:- Copy Number:- of Intentionally
International Standardization of Product Properties Definition writing
International Standardization of Product Properties Definition writing 237gwg 3DWG2 Data model definition figure source document of DET definition supplemented by derived from 0.1 0.1 DATA ELEMENT TYPE
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 JIANGSU YANGTZE TESTING, CERTIFCATION AND INSPECTION CORPORATION No.6-3, XingZhi Road, XingZhi Technology Park XinGang Economic Development Zone NanJing City,
Voltage regulator. SPAU 341 C 1MRS MBG Issued: July 1998 Status: Revised Version: C/ Data subject to change without notice
Issued: July 1998 Status: Revised Version: C/08.10.2003 Data subject to change without notice Features Comprehensive voltage regulation for power transformers with on-load tapchangers in distribution substations
SCADAPack FlowStation 110. Pump station controller
SCADAPack FlowStation 110 Pump station controller Features 1 Complete Pump Package The Schneider Electric FlowStation 110 is a complete Pump Station Controller, targeted for use in storm and waste water
9. Hot Socketing and Power-On Reset in Stratix IV Devices
February 2011 SIV51009-3.2 9. Hot Socketing and Power-On Reset in Stratix IV Devices SIV51009-3.2 This chapter describes hot-socketing specifications, power-on reset (POR) requirements, and their implementation
GUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES
GUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES Table of Contents 1 PURPOSE... 2 2 GENERAL... 2 3 GUIDANCE AND INTERPRETATIVE DOCUMENTS... 2
UKAS Publications List
PUBLICATIONS FOR ALL ORGANISATIONS General BEIS document Accreditation Logo & Symbols The National Accreditation Logo & Symbols: Conditions for use by UKAS and UKAS accredited organisations February 2017
Redundancy unit CP-D RU Accessory for CP range power supplies (e.g. switch mode power supplies CP-D range)
Data sheet Redundancy unit Accessory for CP range power supplies (e.g. switch mode power supplies CPD range) The provides decoupling of two power supply units and ensures automatic redundant power supply
Instruction Manual. Sound Calibrator 42AB. LI0062 Revision 30 April 2012
Instruction Manual Sound Calibrator 42AB www.gras.dk Revision History Any feedback or questions about this document are welcome at gras@gras.dk. Revision Date Description 1 October 2002 First publication
List of EA Publications. And International. Documents
EA/INF-01 List of EA Publications and International Documents Publication Reference EA-INF/01: 2018 List of EA Publications And International Documents PURPOSE This gives the list of EA documents to be
Industrial Power Supplies
75-600 Watt Features Switch mode power supplies for DIN-rail mounting 4 power ranges with 3, 6, 12 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise EMI complies
LBC Series 3-phase PSU / Battery Charger
3-phase PSU / Battery Charger The shelf consists of a ruggedized Battery Charger, PSU with a 3-phase input for 400 / 480 VAC (line to line) and with an output suitable for 110V battery charging. DC-DC
Redundancy unit CP-A RU
2CDC 271 010 F0t06 Features Decoupling of CP power supply units with 2 inputs, each up to 20 A per input / channel Output up to 40 A True redundancy by 100 % decoupling of two parallel connected power
EMC Measurement Software EMC32
EMC Measurement Software EMC32 For use in development, for compliance and batch testing Flexible Modules for measuring electromagnetic interference (EMI) and electromagnetic susceptibility (EMS) Support
Complimentary Reference Material
Complimentary Reference Material This PDF has been made available as a complimentary service for you to assist in evaluating this model for your testing requirements. TMG offers a wide range of test equipment
P2-04DAL-2 Analog Output. Removable Terminal Block Specifications
WARNING: To minimize the risk of potential safety problems, you should follow all applicable local and national codes that regulate the installation and operation of your equipment. These codes vary from
Report. Certificate M6A SIMATIC S7 Distributed Safety
Report to the Certificate M6A 17 05 67803 014 Safety-Related Programmable Systems SIMATIC S7 Distributed Safety Manufacturer: Siemens AG DF FA AS Gleiwitzer Str. 555 D-90475 Nürnberg Revision 3.1 dated
Technology Live Workshop
Technology Live Workshop David Pitt Product Manager Eaton Electric Ltd. Technology Live Workshop Subjects to be covered in this Technology Live Workshop: Increased need for installation of transient voltage
Company Directive ENGINEERING SPECIFICATION EE SPEC: 136
Company Directive ENGINEERING SPECIFICATION EE SPEC: 136 Ancillary Electrical Equipment for Use in Conjunction with Switchgear and Protection/Control Panels NOTE: The current version of this document is
HI HI HI HI Portable Microprocessor Thermistor Thermometers
1 2 Instruction Manual HI 93501 - HI 93502 HI 93503 - HI 93510 Portable Microprocessor Thermistor Thermometers LO HI CLEAR F HOLD ins rum n s ON OFF Dear Customer, Thank you for choosing a Hanna product.
Please comply with all warnings and operating. instructions in this manual strictly. Save this. manual properly and read carefully the following
Please comply with all warnings and operating instructions in this manual strictly. Save this manual properly and read carefully the following instructions before installing the unit. Do not operate this
Type VRLTC tap changer
Report No. 1ZUA938502-AGC 2, Rev 0 Date: 6 November 2012 Type VRLTC tap changer Ruggedized electronics systems specification & type test data Product Style No Rating By Type VRLTC, on-tank, vacuum reactance
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-39016/41E 15 June 2005 SUPERSEDING MIL-PRF-39016/41D 20 July 1988 PERFORMANCE SPECIFICATION SHEET RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 1 AMPERE, TERMINALS
Report. Certificate Z AC500-S
Report on the Certificate Z10 15 04 83652 005 AC500-S Manufacturer: ABB Automation Products GmbH ACP Eppelheimer Straße 82 69123 Heidelberg Deutschland Report no. Revision 1.4 of 2016-09-19 Test Body Rail
UKAS Publications List
PUBLICATIONS FOR ALL ORGANISATIONS General BEIS Accreditation Logo & Symbols The National Accreditation Logo & Symbols: Conditions for use by UKAS and UKAS accredited organisations June 2018 - replaces
Series E/PSI U
EPS - Datasheet The new electronic high performance power supplies of the»e/psi 9000 3U«series of EPS Electronic Power Supplies are especially suitable for test systems and industrial controls due to their
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 A TEST LAB TECHNO CORP. 101-104, 1F, A Building, Taoyuan Street Safflower Ridge Industrial Area, Nanshan District Shenzhen, 518055, People s Republic of China
Switchgear Design Impacts the Reliability of Backup Power Systems
Switchgear Design Impacts the Reliability of Backup Power Systems December 2010/AT307 by Reza Tajali, P.E. Square D Power Systems Engineering Make the most of your energy SM Revision #1 12/10 When a cascaded
Operating Manual Extension for Vane Anemometer MiniAir6/60/64-Ex
Operating Manual Extension for Vane Anemometer MiniAir6/60/64-Ex Article no.: 93.xxxx Type: g.641.6xs-yyy Micro g.642.6xs-yyy Mini g.648.6xs-yyy Macro II (1/2) G [Ex ia] IIC Issue date: June 2008 For Sensor
Industrial Relays, General Information
products Panel Relays General information Industrial Relays, General Information General Information Application Guide Breaking Capacity Approvals General Information Contacts Contact material There are
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 A TEST LAB TECHNO CORP. No.140-1, Changan Street Bade District Taoyuan City, Taiwan (R.O.C.) Kevin Tsai email: kevin@atl-lab.com.tw Phone: 886-3-2710188 Ext.
General information. Display. Supply voltage. Input current
Data sheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 100 KB General information Firmware
Line reactors SINAMICS. SINAMICS G130 Line reactors. Safety information 1. General. Mechanical installation 3. Electrical installation
Safety information 1 General 2 SINAMICS SINAMICS G130 Mechanical installation 3 Electrical installation 4 Technical specifications 5 Operating Instructions Control version V4.7 04/2014 A5E00331462A Legal
Explanations on the Concept of IEC Fit for the Future with SIVACON!
Explanations on the Concept of IEC61439 Fit for the Future with SIVACON! Explanations on the Concept of IEC61439 Milestones in the development of the switchgear and controlgear standards: 1896 1941 1958
Agilent 66000A 1200 W DC Modular Power System, GPIB
Agilent 66000A 1200 W DC Modular Power System, GPIB Data Sheet Speed and accuracy for test optimization 8-slot mainframe accepts up to 8 DC power modules 1200 W total DC power output, up to 150 W per module
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GLOBAL COMPLIANCE AND TESTING CENTER OF HUAWEI TECHNOLOGIES CO., LTD. (RELIABILITY LABORATORY OF HUAWEI TECHNOLOGIES CO., LTD.). 1 Administration Building,
Lux Intelligent Emergency Light Testing System. Lx Features
Lux Intelligent Emergency Light Testing System Lx-9400 The Advanced Lux Intelligent addressable Emergency Lighting Control System is designed provide a simple yet powerful, reliable and cost effective
USER MANUAL SV 35 ACOUSTIC CALIBRATOR. Copyright 2015 SVANTEK. All rights reserved.
USER MANUAL SV 35 ACOUSTIC CALIBRATOR Warsaw, January 2016 Copyright 2015 SVANTEK. All rights reserved. 2 SV 35 User Manual Contents 1. Introduction... 3 2. Acoustic calibrator SV 35... 3 2.1. General
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-39016/23F 15 June 2005 SUPERSEDING MIL-PRF-39016/23E 20 July 1988 PERFORMANCE SPECIFICATION SHEET RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, SPDT, LOW LEVEL TO 1.0 AMPERE WITH
ANSI-ASQ National Accreditation Board/ACLASS
ANSI-ASQ National Accreditation Board/ACLASS Washington Laboratories, Ltd. 1 7560 Lindbergh Drive Gaithersburg, Maryland 20879 John Repella Phone: 301-216-1500 TESTING Valid to: June 30, 2014 Certificate
Owner s Manual Revision 4.01 Option 1
Owner s Manual Revision 4.01 Option 1 Special Version of the SW series Inverter / Charger for Motor Coach Applications Part # 2031-7 (Supplement to Normal Manual) Effective Date: April 17, 1996 Trace Engineering
Motor Controllers. On-Road AC Motor Controller. Model 1239E.
Motor Controllers Model 29E www.curtisinstruments.com The E difference A significant enhancement to the Curtis AC family, The E models utilize a powerful dual-microprocessor logic architecture to provide
General information. Display. Supply voltage
Data sheet SIMATIC S7-1200, CPU 1212C, COMPACT CPU, DC/DC/RLY, ONBOARD I/O: 8 DI 24V DC; 6 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 75 KB General information Product