SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. LAIRD TECHNOLOGIES, INC. W66 N220 Commerce Court Cedarburg, WI Adam Alger Phone:
|
|
|
- Liliana Greer
- 5 years ago
- Views:
Transcription
1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LAIRD TECHNOLOGIES, INC. W66 N220 Commerce Court Cedarburg, WI Adam Alger Phone: ELECTRICAL (EMC) Valid to: January 31, 2019 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests: Test(s): Authority/Application: Test Method(s): Emissions Unintentional Radiators Conducted & Radiated FCC (US) 47 CFR, Part 15 B (using ANSI C63.4:2014); 47 CFR, Part 18 (using FCC MP-5:1986) ISED (Canada) ICES-001; ICES-002; ICES-003; CAN/CSA-CEI/IEC CISPR 11; CAN/CSA-C ; CAN/CSA-CEI/IEC CISPR 22 EU (European Union) EN 12015; EN 55011; EN 55012; EN ; EN 55022; EN 55032; EN ; EN BSI (United Kingdom) BS EN 12015; BS EN 55011; BS EN 55012; BS EN ; BS EN 55022; BS EN 55032; BS EN ; BS EN ACMA (Australia) ComCom (New Zealand) AS/NZS CISPR 11; AS/NZS CISPR 12; AS/NZS CISPR 14.1; AS/NZS CISPR 22; AS/NZS ; AS/NZS ; AS/NZS ; AS/NZS (A2LA Cert. No ) Revised 08/23/2018 Page 1 of 6
2 Emissions Unintentional Radiators Conducted & Radiated International IEC CISPR 11; IEC CISPR 12; IEC CISPR 14-1; IEC CISPR 22; IEC CISPR 32; IEC ; IEC Current Harmonics EU (European Union) EN ; EN Australia / New Zealand AS/NZS ; AS/NZS ; AS/NZS International IEC ; IEC Voltage Fluctuations & Flicker EU (European Union) EN ; EN Australia / New Zealand AS/NZS ; AS/NZS ; AS/NZS International IEC ; IEC Intentional Radiators Conducted & Radiated FCC (US) 47 CFR, Part 15 C (using ANSI C63.10:2013); DA ; KDB D01; KDB ; KDB D01, D02, D03; KDB D01, D02; 47 CFR, Part 15 D (using ANSI C63.17:2006); 47 CFR, Part 15 E (DFS Only), (using KDB D01, D02, D03, D04, D05, D06); ANSI C63.4:2003, 2009; ET Docket No [FCC 06-96]; KDB , D02; KDB ; OET 13TR1003; 47 CFR, Part 15 F (using ANSI C63.10:2013); 47 CFR, Part 90 (using TIA/EIA 603-C); 47 CFR, Part 95 (using TIA/EIA 603-C) ISED (Canada) RSS-GEN; RSS-112; RSS-119; RSS-123; RSS-125; RSS-131; RSS-137; RSS-210; RSS-216; RSS-213; RSS-220; RSS-236; RSS-243; RSS-247; RSS-310 (A2LA Cert. No ) Revised 08/23/2018 Page 2 of 6
3 Emissions Intentional Radiators Conducted & Radiated EU (European Union) ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN (excluding section 9.6); ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ACMA (Australia) AS/NZS 4268; AS/NZS 4771 Immunity EU (European Union) EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN 55024; EN 55035; EN ; EN ; EN BSI (United Kingdom) BS EN ; BS EN ; BS EN ; BS EN ; BS EN ; BS EN ; BS EN ; BS EN ; BS EN 55024; BS EN 55035; BS EN ; BS EN ; BS EN ACMA (Australia) ComCom (New Zealand) AS/NZS CISPR 14.2; AS/NZS CISPR 24; AS/NZS CISPR 35; AS/NZS ; AS/NZS International IEC ; IEC ; IEC ; IEC ; IEC ; IEC ; IEC ; IEC CISPR 14-2; IEC CISPR 24; IEC CISPR 35; IEC ; IEC (A2LA Cert. No ) Revised 08/23/2018 Page 3 of 6
4 Product and Industry Specific Standards Generic Standards EN ; EN ; EN ; EN ; AS/NZS ; AS/NZS ; AS/NZS ; AS/NZS ; AS/NZS ; AS/NZS ISM (Industrial / Scientific / Medical) Vehicles, Boats, Internal Combustion Engines Household Appliances, Electric Tools, and Similar ITE (Information Technology Equipment) Laboratory Electrical Equipment IEC CISPR 11; EN 55011; AS/NZS CISPR 11 IEC CISPR 12; EN 55012; AS/NZS CISPR 12 IEC CISPR 14-1; IEC CISPR 14-2; EN EN ; AS/NZS CISPR 14.1; AS/NZS CISPR 14.2 IEC CISPR 22; IEC CISPR 24; IEC CISPR 32; IEC CISPR 35; EN 55022; EN 55024; EN 55032; EN 55035; AS/NZS CISPR 22; AS/NZS CISPR 24; AS/NZS CISPR 32; AS/NZS CISPR 35 IEC ; EN ; BS EN ; BS EN Railway Applications BS EN Military MIL-STD-461E, RE 101; MIL-STD-461E, RS 101 Alarm Systems EN ; BS EN Power Drive Systems IEC ; EN ; BS EN ; IEC ; EN ; BS EN ; IEC 62061; EN 62061; BS EN (A2LA Cert. No ) Revised 08/23/2018 Page 4 of 6
5 Product and Industry Specific Standards Agriculture / Forestry ISO (excluding section 6.8) (80 MHz to 1 GHz) Construction Equipment ISO (excluding section 5.10) (80 MHz to 1 GHz) Road Vehicles Combustible & Toxic Gasses, Oxygen Electrical Apparatus Audio, Video, Audio-visual, and Entertainment Lighting Measuring Relays and Protection Equipment ISO (ESD only) BS EN BS EN ; BS EN IEC ; BS EN Time Relays IEC/EN Medical Equipment IEC ; EN ; IEC ; EN ; IEC ; EN ; IEC ; EN ; IEC ; EN ; IEC ; EN ; AIM (A2LA Cert. No ) Revised 08/23/2018 Page 5 of 6
6 Testing Activities Performed in Support of FCC Declaration of Conformity and Certification in Accordance with 47 Code of Federal Regulations and FCC KDB , Appendix A, Table A.1 1 : Rule Subpart/Technology Test Method Maximum Frequency Unintentional Radiators Part 15B ANSI C63.4: MHz Industrial, Scientific, and Medical Equipment Part 18 FCC MP-5 (February 1986) MHz Intentional Radiators Part 15C ANSI C63.10: MHz Unlicensed Personal Communication Systems Devices Part 15D ANSI C63.17: MHz U-NIII with DFS Intentional Radiators Part 15E FCC KDB D02 (v01) MHz UWB Intentional Radiators Part 15F ANSI C63.10: MHz 1 Accreditation does not imply acceptance to the FCC equipment authorization program. Please see the FCC website ( for a listing of FCC approved laboratories. (A2LA Cert. No ) Revised 08/23/2018 Page 6 of 6
7 Accredited Laboratory A2LA has accredited LAIRD TECHNOLOGIES, INC. Cedarburg, WI for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 19 th day of December 2016 President and CEO For the Accreditation Council Certificate Number Valid to January 31, 2019 Revised February 21, 2017 For the tests to which this accreditation applies, please refer to the laboratory s Electrical Scope of Accreditation.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TA TECHNOLOGY (SHANGHAI) CO., LTD. Building 3, No. 145 Jintang Rd. Tangzhen Industry Park Pudong, Shanghai, People s Republic of China Mr. Zhihui (Henry) Liu
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 A TEST LAB TECHNO CORP. 101-104, 1F, A Building, Taoyuan Street Safflower Ridge Industrial Area, Nanshan District Shenzhen, 518055, People s Republic of China
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MICROSOFT EMC LABORATORY 1 17760 NE 67 th Court Redmond, WA 98052 Sajay Jose Email: sajose@microsoft.com Phone: 425 421 9799 ELECTRICAL (EMC) Valid to: August
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY CO. LTD. Fl. 3, Building A, Fei Yang Science Park No. 8 Long Chang Road, Block 67 BaoAn District, Guangdong Province,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 JIANGSU YANGTZE TESTING, CERTIFCATION AND INSPECTION CORPORATION No.6-3, XingZhi Road, XingZhi Technology Park XinGang Economic Development Zone NanJing City,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 QUALITECH EMC & Product Safety Laboratory 30 Hasivim Street Petah-Tikva, 4959388, ISRAEL Teodor Weisz Phone: +972 3 926 6218 Email: Tedy.Weisz@ecitele.com Rami
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SIEMIC (NANJING-CHINA) LABORATORIES 新美科 ( 南京 ) 信息技术有限公司 No. 2-1 Longcang Avenue Yuhua Economic Development Zone Yuhua District, Nanjing, 210039, People s Republic
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN ACADEMY OF METROLOGY AND QUALITY INSPECTION 1 NETC Building, No. 4 Tongfa Road Xili, Nanshan Shenzhen, Guangdong, 518055, People s Republic of China
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CETECOM INC. 411 Dixon Landing Road Milpitas, CA Franz Engert Phone: ELECTRICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CETECOM INC. 411 Dixon Landing Road Milpitas, CA 95035 Franz Engert Phone: 408 586 6205 ELECTRICAL Valid to: December 31, 2019 Certificate Number: 2135.01 In
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN ACADEMY OF METROLOGY AND QUALITY INSPECTION 1 NETC Building, No. 4 Tongfa Road Xili, Nanshan District Shenzhen, Guangdong, 518055, People s Republic
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GLOBAL COMPLIANCE AND TESTING CENTER OF HUAWEI TECHNOLOGIES CO., LTD. (RELIABILITY LABORATORY OF HUAWEI TECHNOLOGIES CO., LTD.). 1 Administration Building,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BAY AREA COMPLIANCE LABORATORIES CORP. No. 69 Pulongcun Puxinhu Industrial Zone, Tangxia Town Dongguan, Guangdong 523719 People s Republic of China Mr. David
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 A TEST LAB TECHNO CORP. No.140-1, Changan Street Bade District Taoyuan City, Taiwan (R.O.C.) Kevin Tsai email: kevin@atl-lab.com.tw Phone: 886-3-2710188 Ext.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BAY AREA COMPLIANCE LABORATORIES CORP. 6/F, the 3rd Phase of WanLi Industrial Building Shihua Road, Futian Free Trade Zone Shenzhen, Guangdong 518038 People
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CETECOM INC. 411 Dixon Landing Road Milpitas, CA Franz Engert Phone: ELECTRICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CETECOM INC. 411 Dixon Landing Road Milpitas, CA 95035 Franz Engert Phone: 408 586 6205 ELECTRICAL Valid to: May 31, 2018 Certificate Number: 2135.01 In recognition
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA 731 Enterprise Drive Lexington, KY 40510 Mr. James Sudduth 859 226 1000 james.sudduth@intertek.com ELECTRICAL Valid to: April 30,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SIEMIC, INC. dba SIEMIC LABORATORIES 775 Montague Expressway Milpitas, CA 95035 Mr. Leslie Bai Phone: 408 526 1188 Email: leslie.bai@siemic.com www.siemic.com
ANSI-ASQ National Accreditation Board/ACLASS
ANSI-ASQ National Accreditation Board/ACLASS Washington Laboratories, Ltd. 1 7560 Lindbergh Drive Gaithersburg, Maryland 20879 John Repella Phone: 301-216-1500 TESTING Valid to: June 30, 2014 Certificate
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Ke Mei Ou Lab Co., Ltd. Room 2013-2016, 20
Federal Communication Commission (FCC) Office of Engineering and Technology (OET) Program Accreditation Procedure
PJLA offers third-party accreditation services to Conformity Assessment Bodies (i.e. Testing and/or Calibration Laboratories, Reference Material Producers, Field Sampling and Measurement Organizations
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SIEMIC LABORATORIES 1 2206 Ringwood Ave. San Jose, CA 95131 Mr. Leslie Bai Phone: 408 526 1188 Email: leslie.bai@siemic.com Mr. Snell Leong Phone: 408 526 1188
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MET LABORATORIES, INC 1 3162 Belick Street Santa Clara, CA 95054 Frank Casbolt Phone: 410 949 1867 Frank.Casbolt@metlabs.com http://www.metlabs.com ELECTRICAL
ANALYTICAL SERVICES DIVISION, VHG LABS Manchester, NH for technical competence in the field of
A2LA has accredited ANALYTICAL SERVICES DIVISION, VHG LABS Manchester, NH for technical competence in the field of Chemical Testing This laboratory is accredited in accordance with the recognized International
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BAY AREA COMPLIANCE LABORATORIES CORP. 1274 Anvilwood Avenue Sunnyvale, CA 94089 Ms. Lisa Tang Phone: 408 732 9162 ELECTRICAL Valid To: September 30, 2020 Certificate
Information on labelling and record-keeping Introduction devices
Information on labelling and record-keeping Electromagnetic compatibility requirements for suppliers of electrical and electronic devices, vehicles and devices with internal combustion engines in Australia
FCC Certification Process Overview (Revised February 15, 2017)
FCC Certification Process Overview (Revised February 15, 2017) INTRODUCTION On November 22, 2016, the Federal Communications Commission has adopted rules to facilitate the continued rapid introduction
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PJF Rockford Park Drive Rockford, MI Bernard Warchuck Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PJF 6 301 Rockford Park Drive Rockford, MI 49341 Bernard Warchuck Phone: 616 866 8296 MECHANICAL Valid To: SEE FOOTNOTE 6 Certificate Number: 1856.01 In recognition
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PJF Rockford Park Drive Rockford, MI Bernard Warchuck Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PJF 6 301 Rockford Park Drive Rockford, MI 49341 Bernard Warchuck Phone: 616 866 8296 MECHANICAL Valid To: SEE FOOTNOTE 6 Certificate Number: 1856.01 In recognition
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DEKRA TESTING AND CERTIFICATION, S.A.U. Parque Tecnologico de Andalucia C/ Severo Ochoa 2 29590-Campanillas, Málaga, SPAIN Jose Maria Fernandez Phone: +34 952619100
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA INC. 3933 U.S. Route 11 Cortland, NY 13045 Terence O Beirne Phone: 607 758 6316 www.intertek.com ELECTRICAL Valid To: March 31,
NIST Designation of CABs: Upcoming Changes for the US and EU Review for Japan
NIST Designation of CABs: Upcoming Changes for the US and EU Review for Japan Japan MRA Workshop March 2, 2016 Presented by Ramona Saar Program Manager, NIST Version updated 2/26/2016 Topics Introduction:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SGS NORTH AMERICA, INC. 15150 Avenue of Science, Suite 300 1 San Diego, CA 92128 Nathan Gieselman Phone: 858 592 7100 ELECTRICAL Valid To: July 31, 2018 Certificate
COMPANY PROFILE. vb_r6.1
COMPANY PROFILE 1 El. products - placing on the market electronical product Compliance with international regulations Compliance with independent program requirements ETSI (R&TTE) FCC IC ARIB... & Global
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ECI TELECOM S LQLAB 30 Hasivim Street Petah-Tikva 4959338, ISRAEL Moshe Perel Phone: 972 52-4008642 Email: Moshe.Perel@ecitele.com ELECTRICAL Valid to: June
Reach your objectives without interference
Reach your objectives without interference Our electromagnetic compatibility (EMC) testing and certification services TÜV SÜD Product Service GmbH Making waves: High EMC standards The risk of electromagnetic
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z ATC INC Guion Lane Indianapolis, IN Hemi Sagi Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 4037 Guion Lane Indianapolis, IN 46268 Hemi Sagi Phone: 317 328 8492 CALIBRATION Valid To: March 31, 2019 Certificate Number: 2197.01
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. TUV RHEINLAND OF NORTH AMERICA, INC Quarry Lane, Suite A Pleasanton, CA 94566
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV RHEINLAND OF NORTH AMERICA, INC. 1 1279 Quarry Lane, Suite A Pleasanton, CA 94566 Mr. Bruce Fagley Phone: 203 426 0888 x119 Email: bfagley@us.tuv.com www.tuv.com
Reg Model : SKR001 Regulatory Assurance Certification
Seagate Korea Design Center, Korea Reg Model : SKR001 Regulatory Assurance Certification DO NOT DUPLICATE CONTROLLED COPY This document has been issued electronically. Only the original recipient of the
COMMON REGULATORY OBJECTIVES FOR GSM EQUIPMENT PART 2 SPECIFIC ASPECTS OF GSM EQUIPMENT
COMMON REGULATORY OBJECTIVES FOR GSM EQUIPMENT PART 2 SPECIFIC ASPECTS OF GSM EQUIPMENT 1. SCOPE This Common Regulatory Objective, CRO, is applicable to GSM equipment, as defined in Clause 2. A CRO is
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MET LABORATORIES, INC 914 West Patapsco Avenue Baltimore, MD 21230 Frank Casbolt Phone 410 949 1867 Frank.Casbolt@metlabs.com http://www.metlabs.com ELECTRICAL
Coda cx1 EMI/EMC Test Procedure
Coda cx1 EMI/EMC Test Procedure CDL 1-TP07-0400:0209 MIT Ref. 85-01050.03 Revision 1.0 28 th March 2002 CDL 1-TP07-0400:0209 Contents 1 Introduction... 1 1.1 Activity Description... 1 2 Requirements...
Ductility SAE J81 (Sec. 4.8) ASME/ANSI B M; Customer Specified Requirements
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SPECIALTY SCREW CORPORATION 2801 Huffman Boulevard Rockford, IL 61103 Beth Halfman Phone: 815 969 4127 MECHANICAL Valid To: November 30, 2017 Certificate Number:
FCC Rules & Procedures. Roy Uggerud, Nemko Norway 25th January 2018
FCC Rules & Procedures Roy Uggerud, Nemko Norway 25th January 2018 Certification requirement Nearly every country requires certification before import and sale of the product 2 25.01.2018 FCC RULES & PROCEDURES
GUIDELINES ON FEATURES AND TECHNICAL SPECIFICATIONS FOR MOBILE CELLULAR DEVICES IMPORTED INTO AND DISTRIBUTED IN KENYA
GUIDELINES ON FEATURES AND TECHNICAL SPECIFICATIONS FOR MOBILE CELLULAR DEVICES IMPORTED INTO AND DISTRIBUTED IN KENYA June 2018 Table of Contents 1. Scope... 3 2. References... 4 3. Abbreviations and
Volume I, Appendix B References Table of Contents
Volume I, Appendix B References Table of Contents B Appendix - References... B-1 B.1 Documents Incorporated in the Guidelines... B-1 B.2 Other Documents Used in Developing the Guidelines... B-3 B.3 Additional
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CFV SOLAR TEST LABORATORY, INC Ste. A University Blvd. SE Albuquerque, NM 87106
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CFV SOLAR TEST LABORATORY, INC. 5600 Ste. A University Blvd. SE Albuquerque, NM 87106 Jim Crimmins (Authorized Representative) Phone: 505 998 0102 Email: Jim.Crimmins@cfvsolar.com
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that 2105 Seabrook Circle Seabrook, TX 77586 has
CL-9 Linear Fader Controller for the 788T Digital Recorder
CL-9 Linear Fader Controller for the 788T Digital Recorder E7556 State Rd. 23 and 33 Reedsburg, WI USA +1 (608) 524-0625 fax: +1 (608) 524-0655 Toll-Free: (800) 505-0625 www.sounddevices.com support@sounddevices.com
Gelo LED Driver 100W, Single output, Constant Voltage RGLD100-24
Features Gelo LED power supplies are designed specifically for use in LED lighting, particularly well-suited for refrigeration, retail display and sign applications. The industry standard footprint and
Features. Applications and Benefits TRC ELECTRONICS, INC
Features Gelo LED power supplies are designed specifically for use in LED lighting, particularly well-suited for refrigeration, retail display and sign applications. The industry standard footprint and
Gelo LED Driver 100W, Single output RGLD100-24
Features Gelo LED power supplies are designed specifically for use in refrigeration, retail display and sign applications. The industry standard footprint and very low profile design provide great benefits
Australian Standard. General requirements for the competence of testing and calibration laboratories AS ISO/IEC ISO/IEC 17025:1999
AS ISO/IEC 17025 1999 ISO/IEC 17025:1999 AS ISO/IEC 17025 Australian Standard General requirements for the competence of testing and calibration laboratories This is a free 7 page sample. Access the full
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61326 First edition 2002-02 Electrical equipment for measurement, control and laboratory use EMC requirements This English-language version is derived from the original bilingual
Security Expert Smartcard Reader Mini
[ MINI ] Security Expert 1 Security Expert Smartcard Reader Mini The Security Expert Smartcard Reader provides a complete multi-technology smart card RFID solution. Compatible with all Wiegand data capable
Declarations of Conformity and Regulatory Information
APPENDIXB Declarations of Conformity and Regulatory Information This appendix provides declarations of conformity and regulatory information for the Cisco Aironet 1130AG Series Access Points and the Cisco
Series. C Series Quick Start Guide. English. One Printer for your Entire Enterprise.
C Series Quick Start Guide Series Compact Industrial Printers English One Printer for your Entire Enterprise. CognitiveTPG, LLC 950 Danby Road, Suite 200, Ithaca, NY 14850 Toll Free: 800-732-8950 Phone:
Procedure for the Recognition of Foreign Testing Laboratories
Issue 6 Amendment May 2018 Spectrum Management and Telecommunications Procedures for Conformity Assessment Bodies Procedure for the Recognition of Foreign Testing Laboratories Amendment: The definition
EUROPEAN ACCREDITATION LEGAL FRAMEWORK
EUROPEAN ACCREDITATION LEGAL FRAMEWORK ECIBC Plenary 2016 Ed Wieles 24 November 2016 CONTENTS European model on Accreditation Requirements for Accreditation bodies Harmonised standards for accreditation
Volume I Appendix B. Table of Contents
Volume I, Appendix B Table of Contents B Appendix -...B-1 B.1 Documents Incorporated in the Standards...B-1 B.2 Standards Development Documents...B-3 B.3 Guidance Documents...B-4 i Volume I Appendix B
CEN and CENELEC Position Paper on the draft regulation ''Cybersecurity Act''
CEN Identification number in the EC register: 63623305522-13 CENELEC Identification number in the EC register: 58258552517-56 CEN and CENELEC Position Paper on the draft regulation ''Cybersecurity Act''
Read Me First for the HP ProCurve Wireless Products - software ver
Read Me First for the Wireless Products - software ver. 2.1.0 This Read Me First provides information for the following products: Wireless Access Point 520wl (J8133A) 802.11a AP Kit 160wl - N America +
GUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES
GUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES Table of Contents 1 PURPOSE... 2 2 GENERAL... 2 3 GUIDANCE AND INTERPRETATIVE DOCUMENTS... 2
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc., has assessed the Laboratory of: (Hereinafter called the Organization) and hereby
Accreditation Criteria For Conformity Assessment Bodies
Page 1 of 8 Reviewed by: Getnet Tsigemalak Approved by: Araya Fesseha Position: Quality Manager Position: Director General Signature: Signature: Contents Page 1 Purpose and Scope... 2 2 References... 2
PRESENTATION OVERVIEW
ITU Regional Seminar for the Africa Region on Conformance and Interoperability Testing Centre(s) Accra (Ghana), 4-6 July 2011 Accreditation Bodies Presented by Andrew Kwan ITU Consultant 1 PRESENTATION
Accreditation Criteria
Accreditation Criteria Product Certification BCB 120 Apr 2006 Contents 0.0 Foreword 2 1.0 Scope 2 2.0 Criteria 2 3.0 Guidance on the requirements of ISO Guide 65 2 4.0 Scope of Accreditation 2 5.0 Time
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COOK RESEARCH INCORPORATED (CRI) 1 Geddes Way West Lafayette, IN 47906 Margaret McClure Phone: 765 463 7537 MECHANICAL Valid To: June 30, 2016 Certificate Number:
Technical Documentation
Technical Documentation for metratec QR15 HF RFID Module Date: June 2015 Version: 1.8 Technical Documentation metratec QR15 Page 1 of 14 Table of Contents 1 General Information / Security Advice...3 1.1
Transitioning Your Laboratory To The New ISO/IEC 17025: 2017 Standard PAGE 26
Transitioning Your Laboratory To The New ISO/IEC 17025: 2017 Standard PAGE 26 NETWORKING / PEOPLE / COMMITTEES / LABORATORIES / REGIONAL EVENTS APRIL 2018 SPECIAL FEATURE Transitioning Your Laboratory
Product Tests Report
TO WHOM IT MAY CONCERN Page: 1 of 5 Product Tests Report Product name: MIC IP dynamic 7000 HD Camera Model number and description: MIC-7230-PB4 MIC IP dynamic 7000 HD 30x D/N PTZ Camera, Black MIC-7230-PW4
NetSense Core Node EX
NetSense Core Node EX datasheet Externally mounted NEMA Connector The Sensity Systems Core Node EX is an integral part of our NetSense platform - an open architecture-based light sensory network that can
Marks associated with TUV SUD BABT Certification Schemes
TUV SUD BABT is a certification body of TUV SUD BABT 2017 BABT_AP014.docx Page 1 of 11 Contents 1. Introduction... 3 2. Definitions... 3 3. Overview of Schemes and Associated Marks... 3 4. Accreditation
American Association for Laboratory Accreditation
Page 1 of 5 This document describes the accreditation requirements for organizations performing activities associated with Stationary Source Evaluation Testing per the requirements of ASTM D7036 (2004).
Iso Iec Certificate Horiba
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with iso iec 17025 certificate
Marks Associated with TUV SUD BABT Certification Schemes
Marks Associated with TUV SUD BABT Certification Schemes TUV SUD BABT is a Certification Body of TUV SUD BABT 2018 BABT AP014 Page 1 of 11 Contents 1. Introduction...3 2. Definitions...3 3. Overview of
Protocol on the Mutual Acceptance of the Results of Conformity Assessment
Protocol on the Mutual Acceptance of the Results of Conformity Assessment 1 Presentation Overview Overview of the Conformity Assessment (CA) Protocol Implementation and Next Steps Cooperation Agreement
CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Coherent LSM 27650 SW 95th Ave. Wilsonville,
1601 North A.W. Grimes, Suite B Round Rock, TX (512) Fax: (512) January 20, 2012
1601 North A.W. Grimes, Suite B Round Rock, TX 78665 e-mail: info@ptitest.com (512) 244-3371 Fax: (512) 244-1846 January 20, 2012 Mr. Bobby Wollard Dynamic Flow Computers 12603 Southwest Freeway Suite
CL-8. User Guide and Technical Information
CL- User Guide and Technical Information E7556 State Highway 23 and 33 Reedsburg, WI USA 53959 +1 (60) 524-0625 fax: +1 (60) 524-0655 Toll-Free: (00) 505-0625 www.sounddevices.com support@sounddevices.com
NI 6521 Specifications
NI 6521 Specifications This document lists specifications for the NI 6521 device. All specifications are subject to change without notice. These specifications are typical at 25 C unless otherwise noted.
IECEE. IEC-ILAC-IAF Tripartite MoU CB-FCS Scheme and Market Control INTERNATIONAL ELECTROTECHNICAL COMMISSION
INTERNATIONAL ELECTROTECHNICAL COMMISSION WORLDWIDE SYSTEM FOR CONFORMITY TESTING AND CERTIFICATION OF ELECTRICAL EQUIPMENT AND COMPONENTS IECEE IEC-ILAC-IAF Tripartite MoU CB-FCS Scheme and Market Control
Strengthening International Systems of Conformity Assessment
2011/SOM1/SCSC/CON1/014 Session 8 Strengthening International Systems of Conformity Assessment Submitted by: International Laboratory Accreditation Cooperation (ILAC) 6 th Conference on Good Regulatory
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision
Who is doing your calibration work?
The United Kingdom Accreditation Service Who is doing your calibration work? Are you confident that your goods and services and their component parts are based on measurements taken with correctly calibrated
Cisco XR Router Technical Specifications and Warnings
APPENDIXA Cisco XR 12406 Router Technical Specifications and Warnings This appendix provides technical specifications, regulatory information, and translated safety warnings and agency approvals for the
Safety Standards. Model Number:
040APS Highlights & Features Compliant to IEC 60601-1 3rd edition IT and medical safety approvals Low earth leakage Current (
AMENDMENT TO THE COMPULSORY SPECIFICATION FOR SWITCHES FOR FIXED INSTALLATIONS (VC 8003)
610 National Regulator for Compulsory Specifications Act (5/2008): Amendment to the Compulsory Specification for switches for fixed installations (VC 8003) 39220 DEPARTMENT OF TRADE AND INDUSTRY STAATSKOERANT,
ENGINEERING SPECIFICATION SHEET. Table of Contents 1 SCOPE ELECTRICAL SPECIFICATION...5
Table of Contents 1 SCOPE...5 2 ELECTRICAL SPECIFICATION...5 2.1 INPUT REQUIREMENT... 5 2.1.1 Input voltage range... 5 2.1.2 Input frequency range... 5 2.1.3 AC inrush current... 5 2.1.4 Input current...
CompuScope 1602 product introduction
CompuScope 1602 product introduction CompuScope 1602 is 16 bit dual channel, 2.5 MS/s waveform digitizer card for the PCI Bus. Recognizing that until very recently, almost all multi-megahertz data acquisition
040APS12 B MDS. MDS Medical AC-DC Open Frame 12Volt, 40Watt / MDS-040APS12 B ``` Highlights & Features. Safety Standards.
040APS12 B Highlights & Features Safety Approvals to IEC 60601-1 3rd ed. & IEC 60950-1 Risk management report available Low touch current (
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2)(b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
CERT Technical Specification
CERT Technical Specification Document Number: V 002 Revision: Issue 2 Date: 16/03/2018 Specification for DECT Cordless Telephones Handsets and Ancillary Equipment Telephone: + 216 70 835 000 Fax: + 216
TECHNICAL DATASHEET MDS Medical AC-DC Open Frame 065APS24 B Highlights & Features Safety Standards Model Number: Unit Weight Dimensions (W x L x H):
065APS24 B Highlights & Features Safety Approvals to IEC 60601-1 3rd ed. & IEC 60950-1 Risk management report available Low touch current (
CompuScope product introduction
CompuScope 12100 product introduction CompuScope 12100 is a 12 bit, waveform digitizer card for the PCI Bus, capable of 100 MS/s sampling on one channel and 50 MS/s sampling on two simultaneous channels.
HEC-100RTN-48QSCA Rev A1.0
HEC100RTN48QSCA Rev A1.0 A. Features High Efficiency (Up to 90%). Active Power Factor Correction (Typical 0.96). Isolation Class I (With FG) AllRound Protection: OVP/SCP/OTP/OPP. Fully isolated Metal case
RTM Contents. Definitions. Conditions SPECIFICATIONS. PCI Express Rear Transition Module for ATCA
SPECIFICATIONS RTM-3661 PCI Express Rear Transition Module for ATCA Contents Definitions...1 Conditions... 1 Host Bus Interface...2 High-Speed Serial Interface... 2 Power... 2 Maximum Power Requirements...2
Digital Camera Image Acquisition
NI PCI-1424, NI PCI-1422 NI PCI-1424 RS422, LVDS, or TTL area- and line-scan camera compatibility Full 8-, 10-, 12-, 14-, 16-, 24-, and 32-bit resolution (grayscale or color) 50 MHz pixel clock rate with
Conformity assessment
Training Course on Conformity and Interoperability, Tunis-Tunisia, from 22 to 26 May 2017 Conformity assessment Presented by: Karim Loukil & Kaïs Siala Page 1 Today s Objectives Present basic information
CEMASTER. Advanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) THERMO VOLTEK EMC COMPLIANCE CEMASTER THE COMPLETE COMPLIANCE-LEVEL TESTER FOR UP TO SIX EMC IMMUNITY STANDARDS Overview