HV-HD33 Tentative version. Color Camera Specification

Transcription

1 HV-H33 Tentative version olor amera Specification or under development, this specification may change. - Mar 15,2012 (first edition) S.Ikeda S.Ikeda SYMOL T SRIPTION (RWN) SIGN MOL HV-H33 TOLRN Prod. ode - Order SIGN T PPROV T UNIT HK T STOR T SL TITL RV. HV-H33 specification 0 WG. SHT P-T1

2 1. Overview The Hitachi color camera HV-H33 is an HTV/STV multi format camera that supports the 100i or 720p or 40i or 576i scan formats. The HV-H33 is a small box type camera by combination between newly developed 1/3 size MOS image sensor, -mount prism and the Hitachi s digital signal processing technology. I comprise the standard H-SI output in the field of broadcast and facilitate the use to various uses. In addition, I added the RS-422 which was convenient for a negative positive inversion function and a theater corresponding to telecine, stadium setting newly. 2. eature (1) Newly developed 1.3 million pixels MOS image sensor Newly developed MOS image sensor s picture is very clear by fps (or 50 fps) progressive scan. nd the sensor does not have vertical smear, so the picture is not adversely affected even if high light objects appear in the picture. (2) Multi format Switchable 100/59.94i, 100/50i, 720/59.94p and 720/50p HTV, and 40/59.94i and 576/50i STV output. (3) Small size Since the lens mount is -mount, a commonly used lens mount in the industrial field, the HV-H33 is a very compact HTV camera that has an H-SI output. The HV-H33 also has an adjustment of flange back, so the camera can be used with many type of lens. (4) Picture quality improvement functions - Knee - lare - Master black - lack and Gain control for R channel and channel - ynachroma - Masking - TL (5) Special effects function by the signal processing - Negative positive inversion function - Right and left inversion function (6) lectronic shutter - Preset ( 6 position ) - Lock scan - S ( uto lectric Shutter ) (7) uto control function - uto white balance - uto black balance - L ( In combination of gain, iris, and shutter ) - S( uto Shading ompensation, Vertical shading only) () i-directional data transfer personal computer can be connected directly (RS-232/RS-422) for remotely controlling the camera functions. The camera mode data is transmitted back to the computer to allow very precise camera control. In multiple camera systems, each camera can be assigned an I number to enable controlling multiple cameras from a single computer. ecause long-distance camera control is possible in RS-422, the setting of the broadcast facilities in a theater and the stadium becomes easy. s means except it, R-Z3 which is accessories of other selling can control a camera. WG P-S1 SHT 2

3 3. Specification (1) Scan system HTV system 4 mode 100/59.94i, 100/50i, 720/59.94p, 720/50p STV system 4 mode 576/50i(4:3), 576/50i(16:9), 40/59.94i(4:3), 40/59.94i(16:9) (2) Image sensor 1/3-size MOS image sensor Total pixels 1376(H) x 1070(V) ffective pixels 120(H) x 720(V) ffective image area 4.0 mm(h) x 3.4 mm(v) (3) Imaging system R, G, 3-MOS (4) Optical system 1/3-size, 2.2 prism (5) Lens mount -mount (flange back mm in air) vailable lens: lange surface of lens: 4.0mm or less (6) Horizontal resolution 720 TV lines, luminance signal center (Y out and TL off) (7) Standard sensitivity.0 (2000lx, 3200K, reflection ratio 9.9%) () S/N 53d (9) Minimum illumination 10 lx (.2.2, Gain +15d, Video level 350mV(50%),gamma:on ) (10) Geometric distortion ull screen 0% (not including lens characteristics) (11) Registration ull screen within 0.05% (not including lens characteristics) (12) Gain 0d to +15d 1d step (13) Shutter (Tentative specification) Preset 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec Variable 1/60 to 1/11239 (@59.94Hz, 1H (approx. 23msec) step) 1/50 to 1/9375 (@50.00Hz, 1H (approx. 2msec) step) (14) Gamma 0.45/1.0(on/off) (15) TL function TL level, TL frequency, Level dependent, risp, alance, lesh tone, Hi chroma TL, olor TL (16) Scene file 4 Scene files (17) olor bar RI bar lange surface of lens 4.0mm or 4.0mm or less WG P-S1 SHT 3

4 (1) Power supply voltage 12V (Stable operation at 10.5 to 15 V (ripple and noise absent)) (19) Power consumption approx. W (20) imension 65mm(W) x 65mm(H) x 125mm() (21) Mass pprox. 550g (22) mbient temperature Operation -10 to 40 Storage -20 to Standard composition olor camera HV-H33 1 Power plug R03-P3 1 Lens plug 4-191J Operation manual 1 5. Input and output signals 5-1. Input signals (1) Sync input (MULTI connector) SYN 0.3 Vp-p ±0.1Vp-p (HTV, STV(No burst)) H/V 2 to 5 Vp-p, negative (MULTI connector) Note: Sync input and Sync output are selected by internal input/output switch. xternal synchronization can synchronize only in the same TV SYSTM mode as the image output. (2) Serial data (RMOT connector, MULTI connector) 1.5 Vp-p ±3 d (when connected to R-Z3) RS-232 level (when connected to personal computer) RS-422 level (when connected to personal computer. Only as for MULTI connector.) Note: Please change RS232/RS-422 and R-Z3 with the side switch of the camera. (cf. table one or two) Please set RS -232 and RS-422 by a menu. (cf. table one or two) Please do not connect serial control to RMOT connector and MULTI connector at the same time Output signals (1) H-SI output or S-SI output (SI OUT connector) 0. Vp-p/75Ω (2) omponent output (MULTI connector) Y : 1.0 Vp-p/75Ω R-Y: 0.7 Vp-p/75Ω -Y: 0.7 Vp-p/75Ω (3) RG output (MULTI connector) R : 0.7 Vp-p/75Ω G : 0.7 Vp-p/75Ω : 0.7 Vp-p/75Ω Note: Please choose RG output or component output by a menu. WG P-S1 SHT 4

5 (4) SYN output (MULTI connector) H : 2 Vp-p/75Ω V : 2 Vp-p/75Ω SYN : 0.3 Vp-p/75Ω Note: Please change SYN input and the SYN output with an internal switch. (5) Serial data (RMOT connector, MULTI connector) 1.5 Vp-p ±3 d (when connected to R-Z3) RS-232 level (when connected to personal computer) RS-422 level (when connected to personal computer. Only as for MULTI connector.) Note: Please change RS232/RS-422 and R-Z3 with the side switch of the camera. (cf. table one or two) Please set RS -232 and RS-422 by a menu. (cf. table one or two) Please do not connect serial control to RMOT connector and MULTI connector at the same time. Table 1.ontrol signal setting of the MULTI connector Side switch Menu RS-232 RS-422 R-Z3 Table 2.ontrol signal setting of the RMOT connector Side switch Menu RS-232/RS-422 RS-232 RS-422 RS-232/RS-422 RS-232 RS-232 RS-422 R-Z3 R-Z3 R-Z3 R-Z3 R-Z3 (6) Lens iris control output (Lens connector, manual override) IRIS ONT : 1.5 V (closed) to 7.5 V (open) (The control range is adjustable by a menu.) VIO ONT : 0.0Vp-p to 1.0Vp-p 6. Pin assignment of connecters MULTI Pin number Signal name 1 R/PR out 2 G/Y out 3 /P out 4 N(Reservation) Note 3 5 GN Note 1 6 R GN 7 G GN GN 9 UNRG +12V in Note 1 10 TX- Note 1 11 RX- Note 1 12 RX/RX+ Note 1 13 Input(H / N) / Output(H / SYN) Note 1,2,3 14 Input(V / SYN) / Output(V / N) Note 1,2,3 15 TX/TX+ Note 1 Note1:When you use TX/RX, H/V/SYN, UNRG +12V, please use GN of 5pin. Note2:The standard shipment setting becomes the input. Please contact sale service to make output. Note3:Please do not do electrical connection in pin. WG P-S1 SHT 5

6 RMOT Pin number Signal name 1 UNRG +12V OUT 2 RX 3 TX 4 GN IN Pin number Signal name GN UNRG +12V IN N LNS Pin number Signal name 1 UNRG +12V OUT 2 N 3 IRIS ONT 4 GN 7. imensions WG P-S1 SHT 6

7 . ccessory amera control box daptor cable (or I-60a) R-Z3 I-60a -501S 9. System omputer Image Processing & Lens amera HV-H30 MULTI RMOT RS-232 RS-422 P + rame Grabber SI OUT IN amera ontrol Panel R-Z3 WG P-S1 SHT 7